Scribd
Upload
858 views1 page

Sacrificial Anode Design for Jetty

This document provides calculations for a cathodic protection sacrificial system for a jetty and RWI piles for a power plant project. It calculates the required anode weight over a 25 year lifetime to protect against corrosion in river mud and water, accounting for coating breakdown. It then lists the proposed anode weight and total weight for each type of pile to be protected, totaling over 100,000 kg of anodes.

Uploaded by

Fian Ardiyana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
858 views1 page

Sacrificial Anode Design for Jetty

This document provides calculations for a cathodic protection sacrificial system for a jetty and RWI piles for a power plant project. It calculates the required anode weight over a 25 year lifetime to protect against corrosion in river mud and water, accounting for coating breakdown. It then lists the proposed anode weight and total weight for each type of pile to be protected, totaling over 100,000 kg of anodes.

Uploaded by

Fian Ardiyana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

PT.

REKAYASA INDUSTRI

Date : Nov 11th 2021


Rev :B
CATHODIC PROTECTION SACRIFICIAL SYSTEM FOR JETTY & RWI PILE
LOMBOK CFSPP FTP-2 2X50 MW
PT. REKAYASA INDUSTRI
DATA :
CALCULATED LIFE TIME (Y) 25 Years
CURRENT DENSITY
- CURRENT DENSITY FOR RIVER MUD 20.00 mA/sq.m
COATING BREAKDOWN 22 %
CURRENT DENSITY BY CALC
- CURRENT DENSITY FOR RIVER MUD (CD1) 4.40 mA/sq.m
- CURRENT DENSITY FOR RIVER WATER 54 mA/sq.m
COATING BREAKDOWN 32 %
CURRENT DENSITY BY CALC
- CURRENT DENSITY FOR RIVER WATER (CD2) 17.22 mA/sq.m
CONSUMPTION RATE OF MAGNESIUM(CON) 7.5 [Link]/Y
UTILIZATION FACTOR (U) 0.60
PROPOSED ANODE WEIGHT (N) 30.0 Kg

NOTES AND FORMULAS :


Dia = Diameter of Pipe
L = Length of Pipe
Ap = Surface Area to be protected = (3.14 x Dia x L)
Ip = Required Protection current (Current Demand) = Ap x CD
Wt = Required Weight of Anode = Ip x Y x Con : U
Nos = Number of anodes required by Weight = Wt : N
N = Proposed Anode Weight

Length Length Nos per Proposed Total Weight of


Dia
SECTION Buried Exposed Number pile Anode Anode proposed
of Piles
(m) (m) (m) (pcs) Qty (kg)
[Link] 0.711 48.0 0.2 53 20.00 1,060.00 31800.00
[Link] 0.711 37.0 8.2 22 16.00 352.00 10560.00
[Link] 0.711 45.0 8.2 34 19.00 646.00 19380.00
[Link] 0.250 35.0 8.2 10 6.00 60.00 1800.00
[Link] 0.610 40.0 8.2 24 15.00 360.00 10800.00
[Link] 0.610 29.0 0.2 48 10.00 480.00 14400.00
[Link] 0.610 30.1 2.2 36 11.00 396.00 11880.00
[Link] 0.610 30.3 0.2 28 11.00 308.00 9240.00
TOTAL 100,620.00

You might also like