0%(1)0% found this document useful (1 vote)
534 views21 pagesFactory Test Log Analysis
The document contains log messages from a factory test process on a device. It shows the process starting at boot up, initializing various modules, registering command handlers, identifying the touchscreen chip as an FTS5CU56A from STM, and returning test results.
Uploaded by
Yhime Soller QuispeCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0%(1)0% found this document useful (1 vote)
534 views21 pagesFactory Test Log Analysis
The document contains log messages from a factory test process on a device. It shows the process starting at boot up, initializing various modules, registering command handlers, identifying the touchscreen chip as an FTS5CU56A from STM, and returning test results.
Uploaded by
Yhime Soller QuispeCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
04-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$ModuleCommon](9770)
EFS_FACTORYAPP_ROOT PATH : /efs/FactoryApp/
04-14 [Link] FactoryTest : [ModuleCommon$readFactoryMode](9770) mode: ON
04-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](9770)
KEYSTRING_BLOCK is already existed...
04-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$initFailhist](9770)
Failhist Version is not V3
04-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](9770)
onReceive boot mode = 1
04-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](9770)
onReceive action=[Link].BOOT_COMPLETED
04-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompleted](9770) [MSP_SEQ][BOOTING
COMPLETED][ING : received IntentBootCompleted -> waiting connect FtClient]
04-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$ModuleCommon](9770)
EFS_FACTORYAPP_ROOT PATH : /efs/FactoryApp/
04-14 [Link] FactoryTest : [ModuleCommon$readFactoryMode](9770) mode: ON
04-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](9770)
KEYSTRING_BLOCK is already existed...
04-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompletedWhenUserBinary](9770) Boot
completed, IS_FACTORY_BINARY = USER MODE
04-14 [Link] FactoryTest : [FtUtil$isEMATCmd](9770) Unknown error
04-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](9770) ...
04-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](9770) cable_type =
ANYWAY_JIG
04-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](9770) value = JIG UART
OFF, JIG_ON = JIG, JIG_ON_1KOHM = FACTORY UART
04-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](9770) adc_value = null
04-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](9770) raw_adc_value =
null
04-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$startFactoryTestClientServiceAPO](9770) start
FactoryTestClient service for APO
04-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$startFactoryTestClientServiceAPO](9770) start
FactoryTestClient service for APO, send response : false
04-14 [Link] FactoryTest : [ModuleCommon$setFtClientState](9770)
04-14 [Link] FactoryTest : [ModuleCommon$disableFtClient](9770) ...
04-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](9770)
onReceive boot mode = 1
04-14 [Link] FactoryTest : [ProtectedFactoryTestBroadcastReceiver$onReceive]
(9770) onReceive action=[Link].REQUEST_FTCLIENT_START
04-14 [Link] FactoryTest :
[ProtectedFactoryTestBroadcastReceiver$startFactoryTestClientServiceAPO](9770)
start FactoryTestClient service for APO
04-14 [Link] FactoryTest : [ModuleCommon$setFtClientState](9770)
04-14 [Link] FactoryTest : [FtClient$onCreate](9770) Create FtClient service
04-14 [Link] FactoryTest : [FtClient$onCreate](9770) registBroadCastReceiver
04-14 [Link] FactoryTest : [FtClient$run](10056) ConnectionThread start
04-14 [Link] FactoryTest : [FtClient$run](10056) Connect client
socket(receiver)
04-14 [Link] FactoryTest : [FtClient$run](10056) Connect client
socket(sender)
04-14 [Link] FactoryTest : [FtClient$run](10056) Client socket connect
success
04-14 [Link] FactoryTest : [FtClient$run](10056) Connected to AT Core
04-14 [Link] FactoryTest : [FtClient$run](10056) [MSP_SEQ][BOOTING COMPLETED]
[ING : connected FtClient -> waiting regist AtHandlers]
04-14 [Link] FactoryTest : [ResponseWriter$ResponseWriter](10056) Create
ResponseWriter
04-14 [Link] FactoryTest : [FtClient$onStartCommand](9770) ...
mSendResponse : false
04-14 [Link] FactoryTest : [FtClient$onStartCommand](9770) ...
mSendResponse : false
04-14 [Link] FactoryTest : [AtParser$registerAllHandler](10056) Register AT
command handler
04-14 [Link] FactoryTest : [RegisterCommonHandler$registerCommonHandler()]
(10056) Register AT command handler for COMMON
04-14 [Link] FactoryTest : [ModuleAudio$ModuleAudio](10056) Create
ModuleAudio
04-14 [Link] FactoryTest : [ModuleAudio$getSystemService](10056)
service=audio
04-14 [Link] FactoryTest : [ModuleCommunication$getSystemService](10056)
service=location
04-14 [Link] FactoryTest : [ModuleCommunication$ModuleCommunication](10056)
Create ModuleCommunication
04-14 [Link] FactoryTest : [ModuleCommunication$registerReceiver](10056)
mContext=[Link]@b76ac2e
04-14 [Link] FactoryTest : [ModuleDevice$ModuleDevice](10056) Create
ModuleDevice
04-14 [Link] FactoryTest : [ModuleDevice$getSystemService](10056)
service=vibrator
04-14 [Link] FactoryTest : [ModuleDevice$getSystemService](10056)
service=storage
04-14 [Link] FactoryTest : [ModuleDevice$getSystemService](10056)
service=activity
04-14 [Link] FactoryTest : [ModuleDevice$getSystemService](10056) service=usb
04-14 [Link] FactoryTest : [ModuleDevice$registerReceiver](10056)
mContext=[Link]@b76ac2e
04-14 [Link] FactoryTest : [ModuleDevice$ModuleDevice](10056)
registerReceiver OK
04-14 [Link] FactoryTest : [ModuleDevice$setStorageVolumeState](10056)
getSubSystem() : fuse
04-14 [Link] FactoryTest : [ModuleDevice$setStorageVolumeState](10056)
getPath() : /storage/emulated/0
04-14 [Link] FactoryTest : [ModuleDevice$setStorageVolumeState](10056)
mExternalSDStorageVolume is null
04-14 [Link] FactoryTest : [ModuleDevice$isMountedStorage](10056) another
error
04-14 [Link] FactoryTest : [ModuleDevice$setStorageVolumeState](10056)
getSubSystem() : fuse
04-14 [Link] FactoryTest : [ModuleDevice$setStorageVolumeState](10056)
getPath() : /storage/emulated/0
04-14 [Link] FactoryTest : [ModuleDevice$setStorageVolumeState](10056)
mUSBStorageVolume is null
04-14 [Link] FactoryTest : [ModuleDevice$isMountedStorage](10056) another
error
04-14 [Link] FactoryTest : [ModuleTouchScreen$ModuleTouchScreen_test](10056)
04-14 [Link] FactoryTest : [TouchScreenPanel$TouchScreenPanel](10056) OCTA ,
phone
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
current_testID = -1
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) TSP ID
(Main) : TSP_ID__CHIP_NAME
04-14 [Link] FactoryTest : [TouchScreenPanel$mapping_IDnCommand](10056) TSP
ID : TSP_ID__CHIP_NAME
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Main
Command : get_chip_name
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Sub Command
: null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) command =>
get_chip_name
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) subCommand
=> null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) 1. set
Command => get_chip_name
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) status ==
ok
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056) 2.
get Result => get_chip_name
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056)
result : fts5cu56a
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) status : OK
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) result :
fts5cu56a
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) returnValue
: [fts5cu56a]
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) TSP ID
(Main) : TSP_ID__VENDOR_NAME
04-14 [Link] FactoryTest : [TouchScreenPanel$mapping_IDnCommand](10056) TSP
ID : TSP_ID__VENDOR_NAME
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Main
Command : get_chip_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Sub Command
: null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) command =>
get_chip_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) subCommand
=> null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) 1. set
Command => get_chip_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) status ==
ok
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056) 2.
get Result => get_chip_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056)
result : STM
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) status : OK
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) result :
STM
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) returnValue
: [STM]
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) TSP ID
(Main) : TSP_ID__MODULE_VENDOR
04-14 [Link] FactoryTest : [TouchScreenPanel$mapping_IDnCommand](10056) TSP
ID : TSP_ID__MODULE_VENDOR
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Main
Command : get_module_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Sub Command
: null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) command =>
get_module_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) subCommand
=> null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) 1. set
Command => get_module_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) status ==
not applicable
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056) 2.
get Result => get_module_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056)
result : NA
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) status :
NOT_APPLICABLE
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) result : NA
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) returnValue
: [NA]
04-14 [Link] FactoryTest : [TouchScreenPanel$setVendor](10056) STM
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
mTSPVendorName : STM
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
mTSPPanelType : OCTA
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
mTSPDeviceType : phone
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPConnectionSpec](10056)
mTSPModuleVendor=NA
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPConnectionSpec](10056)
NA, applied default TSP Selftest Spec
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPConnectionSpec](10056)
TSP Connection Spec : min=1000 max=2000
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
mIsStandardChannel : true
04-14 [Link] FactoryTest : [ModuleDFT$ModuleDFT](10056) Create ModuleDFT
04-14 [Link] FactoryTest : [ModulePower$ModulePower](10056) Create
ModulePower
04-14 [Link] FactoryTest : [ModuleSensor$ModuleSensor](10056)
04-14 [Link] FactoryTest : [SensorDeviceInfo$getSensorName](10056) XML =>
return : STMICRO_SMARTPHONE_LSM6DSL
04-14 [Link] FactoryTest : [SensorDeviceInfo$getSensorName](10056) XML =>
return : AK09918C
04-14 [Link] FactoryTest : [SensorDeviceInfo$getSensorName](10056) XML =>
return : AK09918C
04-14 [Link] FactoryTest : [SensorReadFile$SensorReadFile](10056) Sensor On :
null
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056)
ModuleSensor.ID_COUNT_FILE : 33
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[0] mInfo -
mName : ID_FILE____ACCELEROMETER, mFilePath : ACCEL_SENSOR_RAW, mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[1] mInfo -
mName : ID_FILE____ACCELEROMETER_N_ANGLE, mFilePath : ACCEL_SENSOR_RAW,
mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[2] mInfo -
mName : ID_FILE____ACCELEROMETER_SELF, mFilePath : ACCEL_SENSOR_RAW, mIsExistFile :
true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[3] mInfo -
mName : ID_FILE____ACCELEROMETER_SELFTEST, mFilePath : ACCEL_SENSOR_SELFTEST,
mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[4] mInfo -
mName : ID_FILE____ACCELEROMETER_CAL, mFilePath : ACCEL_SENSOR_CAL, mIsExistFile :
true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[5] mInfo -
mName : ID_FILE____ACCELEROMETER_INTPIN, mFilePath : ACCEL_SENSOR_INTPIN,
mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[6] mInfo -
mName : ID_FILE____SUB_ACCELEROMETER, mFilePath : SUB_ACCEL_SENSOR_RAW,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[7] mInfo -
mName : ID_FILE____SUB_ACCELEROMETER_SELFTEST, mFilePath :
SUB_ACCEL_SENSOR_SELFTEST, mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[8] mInfo -
mName : ID_FILE____SUB_ACCELEROMETER_CAL, mFilePath : SUB_ACCEL_SENSOR_CAL,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[9] mInfo -
mName : ID_FILE____BAROMETER_EEPROM, mFilePath : BAROME_EEPROM, mIsExistFile :
false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[10] mInfo
- mName : ID_FILE____GYRO_TEMPERATURE, mFilePath : GYRO_SENSOR_TEMP, mIsExistFile :
true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[11] mInfo
- mName : ID_FILE____GYRO_SELF, mFilePath : GYRO_SENSOR_SELFTEST, mIsExistFile :
true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[12] mInfo
- mName : ID_FILE____LIGHT_ADC, mFilePath : LIGHT_SENSOR_RAW, mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[13] mInfo
- mName : ID_FILE____LIGHT_RGBW, mFilePath : LIGHT_SENSOR_RAW, mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[14] mInfo
- mName : ID_FILE____MAGNETIC_POWER_ON, mFilePath : GEOMAGNETIC_SENSOR_POWER,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[15] mInfo
- mName : ID_FILE____MAGNETIC_POWER_OFF, mFilePath : GEOMAGNETIC_SENSOR_POWER,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[16] mInfo
- mName : ID_FILE____MAGNETIC_STATUS, mFilePath : GEOMAGNETIC_SENSOR_STATUS,
mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[17] mInfo
- mName : ID_FILE____MAGNETIC_TEMPERATURE, mFilePath : GEOMAGNETIC_SENSOR_TEMP,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[18] mInfo
- mName : ID_FILE____MAGNETIC_DAC, mFilePath : GEOMAGNETIC_SENSOR_DAC, mIsExistFile
: true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[19] mInfo
- mName : ID_FILE____MAGNETIC_ADC, mFilePath : GEOMAGNETIC_SENSOR_ADC, mIsExistFile
: true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[20] mInfo
- mName : ID_FILE____MAGNETIC_SELF, mFilePath : GEOMAGNETIC_SENSOR_SELFTEST,
mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[21] mInfo
- mName : ID_FILE____MAGNETIC_OFFSETH, mFilePath : GEOMAGNETIC_SENSOR_SELFTEST,
mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[22] mInfo
- mName : ID_FILE____PROXIMITY_ADC, mFilePath : PROXI_SENSOR_ADC, mIsExistFile :
false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[23] mInfo
- mName : ID_FILE____PROXIMITY_AVG, mFilePath : PROXI_SENSOR_ADC_AVG,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[24] mInfo
- mName : ID_FILE____PROXIMITY_OFFSET, mFilePath : PROXI_SENSOR_OFFSET,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[25] mInfo
- mName : ID_FILE____GRIP_RAW, mFilePath : GRIP_SENSOR_RAWDATA, mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[26] mInfo
- mName : ID_FILE____GRIP_THRESHOLD, mFilePath : GRIP_SENSOR_THRESHOLD,
mIsExistFile : true
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[27] mInfo
- mName : ID_FILE____GRIP_TOUCH, mFilePath : GRIP_TOUCH_SENSOR_CHECK,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[28] mInfo
- mName : ID_FILE____GRIP_TOUCH_2, mFilePath : GRIP_TOUCH_SENSOR_CHECK_2,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[29] mInfo
- mName : ID_FILE____GRIP_TOUCH_3, mFilePath : GRIP_TOUCH_SENSOR_CHECK_3,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[30] mInfo
- mName : ID_FILE____GRIP_TOUCH_4, mFilePath : GRIP_TOUCH_SENSOR_CHECK_4,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[31] mInfo
- mName : ID_FILE____GRIP_TOUCH_5, mFilePath : GRIP_TOUCH_SENSOR_CHECK_5,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$initSysfs](10056) index[32] mInfo
- mName : ID_FILE____GRIP_TOUCH_6, mFilePath : GRIP_TOUCH_SENSOR_CHECK_6,
mIsExistFile : false
04-14 [Link] FactoryTest : [SensorReadFile$sensorOn](10056) Sensor On : null
04-14 [Link] FactoryTest : [SensorCalculator$initialize](10056)
04-14 [Link] FactoryTest : [SensorDeviceInfo$getSensorName](10056) File =>
return : LSM6DSL
04-14 [Link] FactoryTest : [SensorSpec$SensorSpec](10056)
mFeature_Accelerometer : LSM6DSL / mFeature_Accelerometer_vendor : STM
04-14 [Link] FactoryTest : [SensorSpec$setSpecAccel](10056) feature : Unknown
=> return null
04-14 [Link] FactoryTest : [SensorDeviceInfo$getSensorName](10056) XML =>
return : AK09918C
04-14 [Link] FactoryTest : [SensorSpec$SensorSpec](10056) mFeature_Magnetic :
AK09918C
04-14 [Link] FactoryTest : [SensorCalculator$specLog](10056) <AccelSelf> null
04-14 [Link] FactoryTest : [SensorCalculator$specLog](10056) <MagneticDAC>
null
04-14 [Link] FactoryTest : [SensorCalculator$specLog](10056) <MagneticADC>
X(-6500,6500) , Y(-6500,6500) , Z(-6500,6500)
04-14 [Link] FactoryTest : [SensorCalculator$specLog](10056) <MagneticADC2>
null
04-14 [Link] FactoryTest : [SensorCalculator$specLog](10056) <MagneticSelf>
X(-30,30) , Y(-30,30) , Z(-400,-50)
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
current_testID = -1
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) TSP ID
(Main) : TSP_ID__CHIP_NAME
04-14 [Link] FactoryTest : [TouchScreenPanel$mapping_IDnCommand](10056) TSP
ID : TSP_ID__CHIP_NAME
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Main
Command : get_chip_name
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Sub Command
: null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) command =>
get_chip_name
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) subCommand
=> null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) 1. set
Command => get_chip_name
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) status ==
ok
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056) 2.
get Result => get_chip_name
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056)
result : fts5cu56a
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) status : OK
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) result :
fts5cu56a
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) returnValue
: [fts5cu56a]
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) TSP ID
(Main) : TSP_ID__VENDOR_NAME
04-14 [Link] FactoryTest : [TouchScreenPanel$mapping_IDnCommand](10056) TSP
ID : TSP_ID__VENDOR_NAME
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Main
Command : get_chip_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Sub Command
: null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) command =>
get_chip_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) subCommand
=> null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) 1. set
Command => get_chip_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) status ==
ok
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056) 2.
get Result => get_chip_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056)
result : STM
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) status : OK
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) result :
STM
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) returnValue
: [STM]
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) TSP ID
(Main) : TSP_ID__MODULE_VENDOR
04-14 [Link] FactoryTest : [TouchScreenPanel$mapping_IDnCommand](10056) TSP
ID : TSP_ID__MODULE_VENDOR
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Main
Command : get_module_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) Sub Command
: null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) command =>
get_module_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) subCommand
=> null
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) 1. set
Command => get_module_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$setTSPCommand](10056) status ==
not applicable
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056) 2.
get Result => get_module_vendor
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPCommandResult](10056)
result : NA
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) status :
NOT_APPLICABLE
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) result : NA
04-14 [Link] FactoryTest : [TouchScreenPanel$getTSPResult](10056) returnValue
: [NA]
04-14 [Link] FactoryTest : [TouchScreenPanel$setVendor](10056) STM
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
mTSPVendorName : STM
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
mTSPPanelType : OCTA
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
mTSPDeviceType : phone
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPConnectionSpec](10056)
mTSPModuleVendor=NA
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPConnectionSpec](10056)
NA, applied default TSP Selftest Spec
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPConnectionSpec](10056)
TSP Connection Spec : min=1000 max=2000
04-14 [Link] FactoryTest : [ModuleTouchScreen$setTSPInfo](10056)
mIsStandardChannel : true
04-14 [Link] FactoryTest : [ModuleForceTouch$write](10056) finish, path:
/sys/class/sec/tsp/cmd, value: get_chip_vendor
04-14 [Link] FactoryTest : [ModuleForceTouch$read](10056) finish, path:
/sys/class/sec/tsp/cmd_status, value: OK
04-14 [Link] FactoryTest : [ModuleForceTouch$read](10056) finish, path:
/sys/class/sec/tsp/cmd_result, value: get_chip_vendor:STM
04-14 [Link] FactoryTest : [ModuleForceTouch$getResult](10056) Returned
value: get_chip_vendor:STM, parsed: STM
04-14 [Link] FactoryTest : [AtBaromete$AtBaromete](10056) BAROMETE_DELTAis
already existed...
04-14 [Link] FactoryTest : [AtFailhist$AtCommandHandler](10056) Trying to
connect to FTLClient
04-14 [Link] FactoryTest : [SensorDeviceInfo$getSensorName](10056) XML =>
return : AK09918C
04-14 [Link] FactoryTest : [AtGripsens$initGripDataNew](10056) SensorInfo=2,
Grip items=2
04-14 [Link] FactoryTest : [AtGripsens$mappingSensorPathNew](10056) index=0
04-14 [Link] FactoryTest : [AtGripsens$mappingSensorPathNew](10056) index=1
04-14 [Link] FactoryTest : [AtGripsens$setGripInfoNew](10056) SensorInfo=2,
Grip items=2
04-14 [Link] FactoryTest : [SensorDeviceInfo$getSensorName](10056) XML =>
return : STMICRO_SMARTPHONE_LSM6DSL
04-14 [Link] FactoryTest : [AtPayments$AtPayments](10056) PRE_PAYis already
existed...
04-14 [Link] FactoryTest : [SensorDeviceInfo$getSensorName](10056) File =>
return : null
04-14 [Link] FactoryTest : [AtProximit$sensorName : null](10056)
04-14 [Link] FactoryTest : [SensorBase$SensorBase](10056)
04-14 [Link] FactoryTest : [SensorProximity$SensorProximity](10056)
Constructor
04-14 [Link] FactoryTest : [AtSysscope$handleCommand](10056) [MSP_SEQ]
[AT:SYSSCOPE=1,0][Pass - NORMAL]
04-14 [Link] FactoryTest : [AtSysscope$changeSysScopeStatus : 1](10056) ,
elapsedRealtime()=203
04-14 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](10056)
mConnectionMode = gsm
04-14 [Link] FactoryTest : [RegisterCommonHandler$getFPSensorAtHandler]
(10056) Vendor:EGISTEC Name:ET713
04-14 [Link] FactoryTest : [RegisterCommonHandler$registerSpecificHandler]
(10056) Register AT command handler for COMMON specific!
04-14 [Link] FactoryTest : [AtParser$registerAllHandler](10056) [MSP_SEQ]
[BOOTING COMPLETED][ING : registered AtHandlers -> waiting nfc f/w update and Esim]
04-14 [Link] FactoryTest : [CommonFingerprintEgis$getVersion](9770)
04-14 [Link] FactoryTest : [CommonFingerprintEgis$loadConceptVersion](9770)
fp ver : [Link]
04-14 [Link] FactoryTest : [CommonFingerprintEgis$loadConceptVersion](9770)
factory fp ver : 253
04-14 [Link] FactoryTest : [CommonFingerprintEgis$loadConceptVersion](9770)
concept ver : 17
04-14 [Link] FactoryTest : [FtClient$sendBootCompleted](9770)
sendBootCompleted
04-14 [Link] FactoryTest : [FtClient$checkSocketConnection](9770)
checkSocketConnection
04-14 [Link] FactoryTest : [FtClient$checkNfcFirmwareUpdated](9770)
checkNfcFirmwareUpdated
04-14 [Link] FactoryTest : [FtClient$sendSimStatIntent](9770) Send an intent
for Sim Switching
04-14 [Link] FactoryTest : [FtClient$sendSimStatIntent](9770) User binary
don't send an intent for sim switching
04-14 [Link] FactoryTest : [FtClient$checkEsimTestDone](9770)
checkEsimTestDone
04-14 [Link] FactoryTest : [FtClient$checkFactoryProviderDBisReady](9770)
checkFactoryProviderDBisReady
04-14 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](9770)
mConnectionMode = gsm
04-14 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](9770)
mConnectionMode = gsm
04-14 [Link] FactoryTest : [FtClient$mBroadcastReceiver](9770)
mIsReceivedCscModemSetting = false
04-14 [Link] FactoryTest : [FtClient$mBroadcastReceiver](9770)
mHasReceivedCscModemSetting = true
04-14 [Link] FactoryTest : [FtClient$sendBootCompletedForPhoneModel](9770)
secPhoneReady=false
04-14 [Link] FactoryTest : [FtClient$sendBootCompletedForPhoneModel](9770)
secPhoneReady=false
04-14 [Link] FactoryTest : [FtClient$sendBootCompletedForPhoneModel](9770)
secPhoneReady=false
04-14 [Link] FactoryTest : [FtClient$sendBootCompletedForPhoneModel](9770)
secPhoneReady=false
04-14 [Link] FactoryTest : [ProtectedFactoryTestBroadcastReceiver$onReceive]
(9770) onReceive action=[Link].SECPHONE_READY
04-14 [Link] FactoryTest : [ProtectedFactoryTestBroadcastReceiver$onReceive]
(9770) [Link].SECPHONE_READY
04-14 [Link] FactoryTest : [FtClient$sendBootCompletedForPhoneModel](9770)
[MSP_SEQ][BOOTING COMPLETED][ING : received SecPhoneReady -> waiting
SecPhoneService]
04-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$ResponseWriter](9770)
Create IPCWriterToSecPhoneService
04-14 [Link] FactoryTest :
[IPCWriterToSecPhoneService$connectToSecPhoneService](9770)
04-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$onServiceConnected]
(9770) [MSP_SEQ][BOOTING COMPLETED][ING : connected SecPhoneService -> waiting
sending IPC to RIL]
04-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$write](9770) Send
Response Message to SecPhone
04-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$write](9770) Response
####
04-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$handleMessage](9770)
[MSP_SEQ][BOOTING COMPLETED][PASS : sent IPC to RIL. The Message was sent
successfully]
04-14 [Link] FactoryTest : [AtParser$process](10056) AT
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT is not registered in
the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT
04-14 [Link] FactoryTest : [FtClient$setForeGroundService](10056)
04-14 [Link] FactoryTest : [FtClient$setPendingIntent](10056)
04-14 [Link] FactoryTest : [FactoryNotification$ ](10056)
04-14 [Link] FactoryTest : [FactoryNotification$createChannel](10056) Start
04-14 [Link] FactoryTest : [FactoryNotification$createChannel](10056) Finish
04-14 [Link] FactoryTest : [ModuleCommon$enableFtClient](10056) ...
04-14 [Link] FactoryTest : [FtClient$handleMessage](10056) FirstCMDReceived:
Noti ON
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+FAILHIST=0,0,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+FAILHIST=0,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+FAILHIST
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 3 : [0, 0, 0]
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 3 : [0, 0, 0]
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) [MSP_SEQ]
[AT:FAILHIST=0,0,0][Start]
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) CMD :
AT+FAILHIST=0,0,0, result :
+CME Error:NA
OK
04-14 [Link] FactoryTest : [ResponseWriter$write](10056) [MSP_SEQ][AT:TX][;
+CME Error:NA;;OK;]
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+FAILHIST=0,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+FACTOLOG=0,7,1,2
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+FACTOLOG=0,7,1,2
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+FACTOLOG
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 4 : [0, 7, 1,
2]
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 4 : [0, 7, 1,
2]
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) [MSP_SEQ]
[AT:FACTOLOG=0,7,1,2][Start]
04-14 [Link] FactoryTest : [ModulePower$doWakeLock](10056) wake=false
04-14 [Link] FactoryTest : [ModulePower$doWakeLock](10056) wake=true
04-14 [Link] FactoryTest : [ModulePower$getSystemService](10056)
service=power
04-14 [Link] FactoryTest : [ModulePower$doWakeLock](10056) FULL WAKELOCK ON
04-14 [Link] FactoryTest : [ModulePower$sendDvfsLockIntent](10056) ...
04-14 [Link] FactoryTest : [ModulePower$sendBroadcast](10056) Intent
{ act=[Link].DVFS_FACTORY_CPU_LOCK }
04-14 [Link] FactoryTest : [ModulePower$sendAlarmOnOffIntent](10056)
[Link].START_FACTORY_TEST
04-14 [Link] FactoryTest : [ModulePower$sendBroadcast](10056) Intent
{ act=[Link].START_FACTORY_TEST }
04-14 [Link] FactoryTest : [ModulePower$setFactoryModeAtBatteryNode](10056)
set : 1
04-14 [Link] FactoryTest : [ModuleCommon$setSwitchFactoryState](10056)
SwitchFactory= + FACTORY_START
04-14 [Link] FactoryTest : [ModuleAudio$sendToAudioManagerFTAOnOff](10056)
[Link].FTA_ON
04-14 [Link] FactoryTest : [ModuleAudio$sendBroadcast](10056) Intent
{ act=[Link].FTA_ON }
04-14 [Link] FactoryTest : [AtFactolog$handleCommand()](10056) FT TYPE: IMEI
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) CMD :
AT+FACTOLOG=0,7,1,2, result :
+FACTOLOG:0,OK
OK
04-14 [Link] FactoryTest : [ResponseWriter$write](10056) [MSP_SEQ][AT:TX][;
+FACTOLOG:0,OK;;OK;]
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+FACTOLOG=0,7,1,2
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest :
[IPCWriterToSecPhoneService$disConnectSecPhoneService](11067)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+FACTOLOG=0,7,1,2
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+FACTOLOG=0,7,1,2
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+FACTOLOG
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 4 : [0, 7, 1,
2]
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 4 : [0, 7, 1,
2]
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) [MSP_SEQ]
[AT:FACTOLOG=0,7,1,2][Start]
04-14 [Link] FactoryTest : [ModulePower$doWakeLock](10056) wake=false
04-14 [Link] FactoryTest : [ModulePower$doWakeLock](10056) FULL WAKELOCK OFF
04-14 [Link] FactoryTest : [ModulePower$doWakeLock](10056) wake=true
04-14 [Link] FactoryTest : [ModulePower$getSystemService](10056)
service=power
04-14 [Link] FactoryTest : [ModulePower$doWakeLock](10056) FULL WAKELOCK ON
04-14 [Link] FactoryTest : [ModulePower$sendDvfsLockIntent](10056) ...
04-14 [Link] FactoryTest : [ModulePower$sendBroadcast](10056) Intent
{ act=[Link].DVFS_FACTORY_CPU_LOCK }
04-14 [Link] FactoryTest : [ModulePower$sendAlarmOnOffIntent](10056)
[Link].START_FACTORY_TEST
04-14 [Link] FactoryTest : [ModulePower$sendBroadcast](10056) Intent
{ act=[Link].START_FACTORY_TEST }
04-14 [Link] FactoryTest : [ModulePower$setFactoryModeAtBatteryNode](10056)
set : 1
04-14 [Link] FactoryTest : [ModuleCommon$setSwitchFactoryState](10056)
SwitchFactory= + FACTORY_START
04-14 [Link] FactoryTest : [ModuleAudio$sendToAudioManagerFTAOnOff](10056)
[Link].FTA_ON
04-14 [Link] FactoryTest : [ModuleAudio$sendBroadcast](10056) Intent
{ act=[Link].FTA_ON }
04-14 [Link] FactoryTest : [AtFactolog$handleCommand()](10056) FT TYPE: IMEI
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) CMD :
AT+FACTOLOG=0,7,1,2, result :
+FACTOLOG:0,OK
OK
04-14 [Link] FactoryTest : [ResponseWriter$write](10056) [MSP_SEQ][AT:TX][;
+FACTOLOG:0,OK;;OK;]
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+FACTOLOG=0,7,1,2
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+VERSNAME=1,7,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+VERSNAME=1,7,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+VERSNAME
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 3 : [1, 7, 0]
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 3 : [1, 7, 0]
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) [MSP_SEQ]
[AT:VERSNAME=1,7,0][Start]
04-14 [Link] FactoryTest : [ModuleCommon$getHiddenVer](10056)
HiddenVer=A325MUBU1AUC1
04-14 [Link] FactoryTest : [ModuleCommon$getPDAVer](10056)
version=A325MUBU1AUC1
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) CMD :
AT+VERSNAME=1,7,0, result :
+VERSNAME:1,A325MUBU1AUC1
OK
04-14 [Link] FactoryTest : [ResponseWriter$write](10056) [MSP_SEQ][AT:TX][;
+VERSNAME:1,A325MUBU1AUC1;;OK;]
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+VERSNAME=1,7,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+URDEVICE=1,0,0,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+URDEVICE=1,0,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+URDEVICE
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+URDEVICE=1,0,0,0 is
not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+URDEVICE=1,0,0,0
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+URDEVICE=1,0,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+URDEVICE=1,0,0,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+URDEVICE=1,0,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+URDEVICE
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+URDEVICE=1,0,0,0 is
not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+URDEVICE=1,0,0,0
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+URDEVICE=1,0,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+ENGMODES=1,1,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+ENGMODES=1,1,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+ENGMODES
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+ENGMODES=1,1,0 is
not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+ENGMODES=1,1,0
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+ENGMODES=1,1,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+ACTIVEID=1,0,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+ACTIVEID=1,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+ACTIVEID
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+ACTIVEID=1,0,0 is
not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+ACTIVEID=1,0,0
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+ACTIVEID=1,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+BATTTEST=1,6
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+BATTTEST=1,6
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+BATTTEST
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 2 : [1, 6]
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 2 : [1, 6]
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) [MSP_SEQ]
[AT:BATTTEST=1,6][Start]
04-14 [Link] FactoryTest : [AtBatttest$handleCommand](10056) [MSP_SEQ]
[AT:BATTTEST=1,6][Pass - IN-Battery Voltage Read]
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) CMD : AT+BATTTEST=1,6,
result :
+BATTTEST:1,3.930
OK
04-14 [Link] FactoryTest : [ResponseWriter$write](10056) [MSP_SEQ][AT:TX][;
+BATTTEST:1,3.930;;OK;]
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+BATTTEST=1,6
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+BATTTEST=3,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+BATTTEST=3,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+BATTTEST
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 2 : [3, 0]
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 2 : [3, 0]
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) [MSP_SEQ]
[AT:BATTTEST=3,0][Start]
04-14 [Link] FactoryTest : [AtBatttest$handleCommand](10056) Read Batt Charge
Count= 1
04-14 [Link] FactoryTest : [AtBatttest$handleCommand](10056) [MSP_SEQ]
[AT:BATTTEST=3,0][Pass - Read IN-Battery Charging Count]
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) CMD : AT+BATTTEST=3,0,
result :
+BATTTEST:3,0
OK
04-14 [Link] FactoryTest : [ResponseWriter$write](10056) [MSP_SEQ][AT:TX][;
+BATTTEST:3,0;;OK;]
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+BATTTEST=3,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+COUNTRST=1,0,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+COUNTRST=1,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+COUNTRST
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 3 : [1, 0, 0]
04-14 [Link] FactoryTest : [AtParser$splitArgu()](10056) args : 3 : [1, 0, 0]
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) [MSP_SEQ]
[AT:COUNTRST=1,0,0][Start]
04-14 [Link] FactoryTest : [AtCountrst$loadFileCounter](10056)
FileNotFoundException
04-14 [Link] FactoryTest : [AtCountrst$loadFileCounter](10056)
FileNotFoundException
04-14 [Link] FactoryTest : [AtCountrst$loadFileCounter](10056)
FileNotFoundException
04-14 [Link] FactoryTest : [AtCountrst$loadFileCounter](10056)
FileNotFoundException
04-14 [Link] FactoryTest : [AtCountrst$handleCommand](10056) [MSP_SEQ]
[AT:COUNTRST=1,0,0][Pass]
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) CMD :
AT+COUNTRST=1,0,0, result :
+COUNTRST:1,1,0,NA,0,NA,NA,NA
OK
04-14 [Link] FactoryTest : [ResponseWriter$write](10056) [MSP_SEQ][AT:TX][;
+COUNTRST:1,1,0,NA,0,NA,NA,NA;;OK;]
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+COUNTRST=1,0,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+MSLSECUR=1,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+MSLSECUR=1,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+MSLSECUR
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+MSLSECUR=1,0 is not
registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+MSLSECUR=1,0
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+MSLSECUR=1,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+MSLSECUR=1,1
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+MSLSECUR=1,1
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+MSLSECUR
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+MSLSECUR=1,1 is not
registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+MSLSECUR=1,1
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+MSLSECUR=1,1
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056)
AT+MSLSECUR=0,0,015C398C6E9CF82984F3AC72A50CAF97F557BB2C6769343DB686A9ED94EDEF362BD
ED4DBBFC5DD9A422C3BEC640BE9FFA6676FA8C8DC7DFACC5C2B9B6ADA3458574280C7E90A476BC1D8A8
89E70D327313BC6F7B8B955F5965B58FCA4639C49A18B28273755EC3DAC8B82C4446D82C208919EA827
C27F4447036DAD0E69D17A67C20B7CB9FE922AC12DF6CE054E3E4FB5F1183426C86F7A98F6DA068B8C1
4AF0CFE14B92B7511E638E22D0EC635BA06674B244E491F5999EF9DE902E70CB68FAAAC4429F337C241
6FA3165B7B2A476C6437381E3783F3BEB3E097D45A64D25D9DBF1257EE613D4DCE7527D6CBC0723AE3C
B82BEA56883799424991
04-14 [Link] FactoryTest : [AtParser$runCmd](10056)
AT+MSLSECUR=0,0,015C398C6E9CF82984F3AC72A50CAF97F557BB2C6769343DB686A9ED94EDEF362BD
ED4DBBFC5DD9A422C3BEC640BE9FFA6676FA8C8DC7DFACC5C2B9B6ADA3458574280C7E90A476BC1D8A8
89E70D327313BC6F7B8B955F5965B58FCA4639C49A18B28273755EC3DAC8B82C4446D82C208919EA827
C27F4447036DAD0E69D17A67C20B7CB9FE922AC12DF6CE054E3E4FB5F1183426C86F7A98F6DA068B8C1
4AF0CFE14B92B7511E638E22D0EC635BA06674B244E491F5999EF9DE902E70CB68FAAAC4429F337C241
6FA3165B7B2A476C6437381E3783F3BEB3E097D45A64D25D9DBF1257EE613D4DCE7527D6CBC0723AE3C
B82BEA56883799424991
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+MSLSECUR
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056)
AT+MSLSECUR=0,0,015C398C6E9CF82984F3AC72A50CAF97F557BB2C6769343DB686A9ED94EDEF362BD
ED4DBBFC5DD9A422C3BEC640BE9FFA6676FA8C8DC7DFACC5C2B9B6ADA3458574280C7E90A476BC1D8A8
89E70D327313BC6F7B8B955F5965B58FCA4639C49A18B28273755EC3DAC8B82C4446D82C208919EA827
C27F4447036DAD0E69D17A67C20B7CB9FE922AC12DF6CE054E3E4FB5F1183426C86F7A98F6DA068B8C1
4AF0CFE14B92B7511E638E22D0EC635BA06674B244E491F5999EF9DE902E70CB68FAAAC4429F337C241
6FA3165B7B2A476C6437381E3783F3BEB3E097D45A64D25D9DBF1257EE613D4DCE7527D6CBC0723AE3C
B82BEA56883799424991 is not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command:
AT+MSLSECUR=0,0,015C398C6E9CF82984F3AC72A50CAF97F557BB2C6769343DB686A9ED94EDEF362BD
ED4DBBFC5DD9A422C3BEC640BE9FFA6676FA8C8DC7DFACC5C2B9B6ADA3458574280C7E90A476BC1D8A8
89E70D327313BC6F7B8B955F5965B58FCA4639C49A18B28273755EC3DAC8B82C4446D82C208919EA827
C27F4447036DAD0E69D17A67C20B7CB9FE922AC12DF6CE054E3E4FB5F1183426C86F7A98F6DA068B8C1
4AF0CFE14B92B7511E638E22D0EC635BA06674B244E491F5999EF9DE902E70CB68FAAAC4429F337C241
6FA3165B7B2A476C6437381E3783F3BEB3E097D45A64D25D9DBF1257EE613D4DCE7527D6CBC0723AE3C
B82BEA56883799424991
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056)
AT+MSLSECUR=0,0,015C398C6E9CF82984F3AC72A50CAF97F557BB2C6769343DB686A9ED94EDEF362BD
ED4DBBFC5DD9A422C3BEC640BE9FFA6676FA8C8DC7DFACC5C2B9B6ADA3458574280C7E90A476BC1D8A8
89E70D327313BC6F7B8B955F5965B58FCA4639C49A18B28273755EC3DAC8B82C4446D82C208919EA827
C27F4447036DAD0E69D17A67C20B7CB9FE922AC12DF6CE054E3E4FB5F1183426C86F7A98F6DA068B8C1
4AF0CFE14B92B7511E638E22D0EC635BA06674B244E491F5999EF9DE902E70CB68FAAAC4429F337C241
6FA3165B7B2A476C6437381E3783F3BEB3E097D45A64D25D9DBF1257EE613D4DCE7527D6CBC0723AE3C
B82BEA56883799424991
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056)
AT+MSLSECUR=0,0,02CF06042120D9,4000000031C88C242F6F7A58281338F25BF45FFA00CF0C2CEFAE
A7428396E884E35CF68B3A6A6531A7F11FFF2BE70F04E520E8CC545A386A03CAB40460B77F141C12B31
55DACBBD3C875496E4D9B4A56DD1D202970046F19364AC940F73D1852B8537C21B8B1231670A673C2C5
8A32E33B6EC89B96292796104702AA4D92712EB80BDAB59C559CC18B76ED17D00AC37C8EAA308421312
A3989E4939AD855D47849A04DA42FDEC82E8A2A013DF0EC44A868FDE4EEEB8F967AAC9B10672E17E198
3A67B82ADB4C46A144B659FB120EAAE210A172B30A03E8FD6BC1AF3FBC69093EA3B2ED881F4869478C7
48072BB4D4E92E7DE2A6
04-14 [Link] FactoryTest : [AtParser$runCmd](10056)
AT+MSLSECUR=0,0,02CF06042120D9,4000000031C88C242F6F7A58281338F25BF45FFA00CF0C2CEFAE
A7428396E884E35CF68B3A6A6531A7F11FFF2BE70F04E520E8CC545A386A03CAB40460B77F141C12B31
55DACBBD3C875496E4D9B4A56DD1D202970046F19364AC940F73D1852B8537C21B8B1231670A673C2C5
8A32E33B6EC89B96292796104702AA4D92712EB80BDAB59C559CC18B76ED17D00AC37C8EAA308421312
A3989E4939AD855D47849A04DA42FDEC82E8A2A013DF0EC44A868FDE4EEEB8F967AAC9B10672E17E198
3A67B82ADB4C46A144B659FB120EAAE210A172B30A03E8FD6BC1AF3FBC69093EA3B2ED881F4869478C7
48072BB4D4E92E7DE2A6
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+MSLSECUR
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056)
AT+MSLSECUR=0,0,02CF06042120D9,4000000031C88C242F6F7A58281338F25BF45FFA00CF0C2CEFAE
A7428396E884E35CF68B3A6A6531A7F11FFF2BE70F04E520E8CC545A386A03CAB40460B77F141C12B31
55DACBBD3C875496E4D9B4A56DD1D202970046F19364AC940F73D1852B8537C21B8B1231670A673C2C5
8A32E33B6EC89B96292796104702AA4D92712EB80BDAB59C559CC18B76ED17D00AC37C8EAA308421312
A3989E4939AD855D47849A04DA42FDEC82E8A2A013DF0EC44A868FDE4EEEB8F967AAC9B10672E17E198
3A67B82ADB4C46A144B659FB120EAAE210A172B30A03E8FD6BC1AF3FBC69093EA3B2ED881F4869478C7
48072BB4D4E92E7DE2A6 is not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command:
AT+MSLSECUR=0,0,02CF06042120D9,4000000031C88C242F6F7A58281338F25BF45FFA00CF0C2CEFAE
A7428396E884E35CF68B3A6A6531A7F11FFF2BE70F04E520E8CC545A386A03CAB40460B77F141C12B31
55DACBBD3C875496E4D9B4A56DD1D202970046F19364AC940F73D1852B8537C21B8B1231670A673C2C5
8A32E33B6EC89B96292796104702AA4D92712EB80BDAB59C559CC18B76ED17D00AC37C8EAA308421312
A3989E4939AD855D47849A04DA42FDEC82E8A2A013DF0EC44A868FDE4EEEB8F967AAC9B10672E17E198
3A67B82ADB4C46A144B659FB120EAAE210A172B30A03E8FD6BC1AF3FBC69093EA3B2ED881F4869478C7
48072BB4D4E92E7DE2A6
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056)
AT+MSLSECUR=0,0,02CF06042120D9,4000000031C88C242F6F7A58281338F25BF45FFA00CF0C2CEFAE
A7428396E884E35CF68B3A6A6531A7F11FFF2BE70F04E520E8CC545A386A03CAB40460B77F141C12B31
55DACBBD3C875496E4D9B4A56DD1D202970046F19364AC940F73D1852B8537C21B8B1231670A673C2C5
8A32E33B6EC89B96292796104702AA4D92712EB80BDAB59C559CC18B76ED17D00AC37C8EAA308421312
A3989E4939AD855D47849A04DA42FDEC82E8A2A013DF0EC44A868FDE4EEEB8F967AAC9B10672E17E198
3A67B82ADB4C46A144B659FB120EAAE210A172B30A03E8FD6BC1AF3FBC69093EA3B2ED881F4869478C7
48072BB4D4E92E7DE2A6
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056)
AT+MSLSECUR=0,0,037DA2DBB6B130BA06FEF5241A89F369BDCB7BB6FC69E71387F9AE4068E93CD5E39
126D9936CCE5C8DF32E0BEE8246223B54B162865EE65BA88718CC04EFC51DB45B5B17DEBD4A8B966FFE
BE44343E5A6C86933683117047B58D8A1DABAD5C7C1C7F274E6ED4F650637B047D0F47D33CC8D3429EA
3E0B78F61AC8C3BACF8D36019D4D5C8B5A4D0CD64B6AF52990C4C284A14431228B3EA7EBB4BDE6F261D
890A2C0044406B39BB1056680124EE089B8A28DA56566CE6DCFD75E6F21A2D7B5F1F2613482BC8DFE20
EF0825099B87E928C8D66954F23E6EE94583EEA3982A84271BF5900A35E0DCE8A9CE5E369C398894F6C
6E6B35DA4D93EA044929
04-14 [Link] FactoryTest : [AtParser$runCmd](10056)
AT+MSLSECUR=0,0,037DA2DBB6B130BA06FEF5241A89F369BDCB7BB6FC69E71387F9AE4068E93CD5E39
126D9936CCE5C8DF32E0BEE8246223B54B162865EE65BA88718CC04EFC51DB45B5B17DEBD4A8B966FFE
BE44343E5A6C86933683117047B58D8A1DABAD5C7C1C7F274E6ED4F650637B047D0F47D33CC8D3429EA
3E0B78F61AC8C3BACF8D36019D4D5C8B5A4D0CD64B6AF52990C4C284A14431228B3EA7EBB4BDE6F261D
890A2C0044406B39BB1056680124EE089B8A28DA56566CE6DCFD75E6F21A2D7B5F1F2613482BC8DFE20
EF0825099B87E928C8D66954F23E6EE94583EEA3982A84271BF5900A35E0DCE8A9CE5E369C398894F6C
6E6B35DA4D93EA044929
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+MSLSECUR
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056)
AT+MSLSECUR=0,0,037DA2DBB6B130BA06FEF5241A89F369BDCB7BB6FC69E71387F9AE4068E93CD5E39
126D9936CCE5C8DF32E0BEE8246223B54B162865EE65BA88718CC04EFC51DB45B5B17DEBD4A8B966FFE
BE44343E5A6C86933683117047B58D8A1DABAD5C7C1C7F274E6ED4F650637B047D0F47D33CC8D3429EA
3E0B78F61AC8C3BACF8D36019D4D5C8B5A4D0CD64B6AF52990C4C284A14431228B3EA7EBB4BDE6F261D
890A2C0044406B39BB1056680124EE089B8A28DA56566CE6DCFD75E6F21A2D7B5F1F2613482BC8DFE20
EF0825099B87E928C8D66954F23E6EE94583EEA3982A84271BF5900A35E0DCE8A9CE5E369C398894F6C
6E6B35DA4D93EA044929 is not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command:
AT+MSLSECUR=0,0,037DA2DBB6B130BA06FEF5241A89F369BDCB7BB6FC69E71387F9AE4068E93CD5E39
126D9936CCE5C8DF32E0BEE8246223B54B162865EE65BA88718CC04EFC51DB45B5B17DEBD4A8B966FFE
BE44343E5A6C86933683117047B58D8A1DABAD5C7C1C7F274E6ED4F650637B047D0F47D33CC8D3429EA
3E0B78F61AC8C3BACF8D36019D4D5C8B5A4D0CD64B6AF52990C4C284A14431228B3EA7EBB4BDE6F261D
890A2C0044406B39BB1056680124EE089B8A28DA56566CE6DCFD75E6F21A2D7B5F1F2613482BC8DFE20
EF0825099B87E928C8D66954F23E6EE94583EEA3982A84271BF5900A35E0DCE8A9CE5E369C398894F6C
6E6B35DA4D93EA044929
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056)
AT+MSLSECUR=0,0,037DA2DBB6B130BA06FEF5241A89F369BDCB7BB6FC69E71387F9AE4068E93CD5E39
126D9936CCE5C8DF32E0BEE8246223B54B162865EE65BA88718CC04EFC51DB45B5B17DEBD4A8B966FFE
BE44343E5A6C86933683117047B58D8A1DABAD5C7C1C7F274E6ED4F650637B047D0F47D33CC8D3429EA
3E0B78F61AC8C3BACF8D36019D4D5C8B5A4D0CD64B6AF52990C4C284A14431228B3EA7EBB4BDE6F261D
890A2C0044406B39BB1056680124EE089B8A28DA56566CE6DCFD75E6F21A2D7B5F1F2613482BC8DFE20
EF0825099B87E928C8D66954F23E6EE94583EEA3982A84271BF5900A35E0DCE8A9CE5E369C398894F6C
6E6B35DA4D93EA044929
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056)
AT+MSLSECUR=0,0,0415C34E59AF924B1BCE98B47BE9D6050601DE83BE91A9B25F21BAF,A2AC3282CF0
4E5422DF8C1163C1BE25D93F5EF9D3E037603FA358E0F5A04E56BDFE3C075858CAB3F8F62D12B83D5F0
E45D78764FB935358F1DCC72B7E2214BE45CB54BFC6D52727FA2810280D4E570BC23E3F59D4A5C23AD5
21FFCC77DB76DF4F36233D463CE5E3E2A5F992B8125A7967A958C6738BA123DC954AE38674BE5FB720A
654556EF0CB1EB2B5BE76451ACBABB66DF6DCEFB59364F04FE2F9277681CD9ED8EF0D98437E461E2B26
5A483C9ED5FFE31EE0CD7153233FF4AF50ADDA212C9D7E8283C831ABD4D2D0A00F8290C2F3C4C6DCEC4
F55DF8A97CA17CE335FD
04-14 [Link] FactoryTest : [AtParser$runCmd](10056)
AT+MSLSECUR=0,0,0415C34E59AF924B1BCE98B47BE9D6050601DE83BE91A9B25F21BAF,A2AC3282CF0
4E5422DF8C1163C1BE25D93F5EF9D3E037603FA358E0F5A04E56BDFE3C075858CAB3F8F62D12B83D5F0
E45D78764FB935358F1DCC72B7E2214BE45CB54BFC6D52727FA2810280D4E570BC23E3F59D4A5C23AD5
21FFCC77DB76DF4F36233D463CE5E3E2A5F992B8125A7967A958C6738BA123DC954AE38674BE5FB720A
654556EF0CB1EB2B5BE76451ACBABB66DF6DCEFB59364F04FE2F9277681CD9ED8EF0D98437E461E2B26
5A483C9ED5FFE31EE0CD7153233FF4AF50ADDA212C9D7E8283C831ABD4D2D0A00F8290C2F3C4C6DCEC4
F55DF8A97CA17CE335FD
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+MSLSECUR
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056)
AT+MSLSECUR=0,0,0415C34E59AF924B1BCE98B47BE9D6050601DE83BE91A9B25F21BAF,A2AC3282CF0
4E5422DF8C1163C1BE25D93F5EF9D3E037603FA358E0F5A04E56BDFE3C075858CAB3F8F62D12B83D5F0
E45D78764FB935358F1DCC72B7E2214BE45CB54BFC6D52727FA2810280D4E570BC23E3F59D4A5C23AD5
21FFCC77DB76DF4F36233D463CE5E3E2A5F992B8125A7967A958C6738BA123DC954AE38674BE5FB720A
654556EF0CB1EB2B5BE76451ACBABB66DF6DCEFB59364F04FE2F9277681CD9ED8EF0D98437E461E2B26
5A483C9ED5FFE31EE0CD7153233FF4AF50ADDA212C9D7E8283C831ABD4D2D0A00F8290C2F3C4C6DCEC4
F55DF8A97CA17CE335FD is not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command:
AT+MSLSECUR=0,0,0415C34E59AF924B1BCE98B47BE9D6050601DE83BE91A9B25F21BAF,A2AC3282CF0
4E5422DF8C1163C1BE25D93F5EF9D3E037603FA358E0F5A04E56BDFE3C075858CAB3F8F62D12B83D5F0
E45D78764FB935358F1DCC72B7E2214BE45CB54BFC6D52727FA2810280D4E570BC23E3F59D4A5C23AD5
21FFCC77DB76DF4F36233D463CE5E3E2A5F992B8125A7967A958C6738BA123DC954AE38674BE5FB720A
654556EF0CB1EB2B5BE76451ACBABB66DF6DCEFB59364F04FE2F9277681CD9ED8EF0D98437E461E2B26
5A483C9ED5FFE31EE0CD7153233FF4AF50ADDA212C9D7E8283C831ABD4D2D0A00F8290C2F3C4C6DCEC4
F55DF8A97CA17CE335FD
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056)
AT+MSLSECUR=0,0,0415C34E59AF924B1BCE98B47BE9D6050601DE83BE91A9B25F21BAF,A2AC3282CF0
4E5422DF8C1163C1BE25D93F5EF9D3E037603FA358E0F5A04E56BDFE3C075858CAB3F8F62D12B83D5F0
E45D78764FB935358F1DCC72B7E2214BE45CB54BFC6D52727FA2810280D4E570BC23E3F59D4A5C23AD5
21FFCC77DB76DF4F36233D463CE5E3E2A5F992B8125A7967A958C6738BA123DC954AE38674BE5FB720A
654556EF0CB1EB2B5BE76451ACBABB66DF6DCEFB59364F04FE2F9277681CD9ED8EF0D98437E461E2B26
5A483C9ED5FFE31EE0CD7153233FF4AF50ADDA212C9D7E8283C831ABD4D2D0A00F8290C2F3C4C6DCEC4
F55DF8A97CA17CE335FD
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056)
AT+MSLSECUR=0,0,0504462BBFB52B7A2288B707990A861A39FA9427D499F438A26A123B32F0EEB6B70
8
04-14 [Link] FactoryTest : [AtParser$runCmd](10056)
AT+MSLSECUR=0,0,0504462BBFB52B7A2288B707990A861A39FA9427D499F438A26A123B32F0EEB6B70
8
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+MSLSECUR
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056)
AT+MSLSECUR=0,0,0504462BBFB52B7A2288B707990A861A39FA9427D499F438A26A123B32F0EEB6B70
8 is not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command:
AT+MSLSECUR=0,0,0504462BBFB52B7A2288B707990A861A39FA9427D499F438A26A123B32F0EEB6B70
8
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056)
AT+MSLSECUR=0,0,0504462BBFB52B7A2288B707990A861A39FA9427D499F438A26A123B32F0EEB6B70
8
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+MSLSECUR=0,0,FF
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+MSLSECUR=0,0,FF
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+MSLSECUR
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+MSLSECUR=0,0,FF is
not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+MSLSECUR=0,0,FF
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+MSLSECUR=0,0,FF
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+AKSEEDNO=1,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+AKSEEDNO=1,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+AKSEEDNO
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+AKSEEDNO=1,0 is not
registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+AKSEEDNO=1,0
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+AKSEEDNO=1,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+AKSEEDNO=0,1807-89-
126
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+AKSEEDNO=0,1807-89-126
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+AKSEEDNO
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+AKSEEDNO=0,1807-89-
126 is not registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+AKSEEDNO=0,1807-89-126
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+AKSEEDNO=0,1807-89-126
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [AtParser$process](10056) AT+LVOFLOCK=1,0
04-14 [Link] FactoryTest : [AtParser$runCmd](10056) AT+LVOFLOCK=1,0
04-14 [Link] FactoryTest : [AtParser$process](10056) command : AT+LVOFLOCK
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) AT+LVOFLOCK=1,0 is not
registered in the atHandler.
04-14 [Link] FactoryTest : [AtParser$runCmd: ](10056) Broadcast unregistered
command: AT+LVOFLOCK=1,0
04-14 [Link] FactoryTest : [AtParser$process done successfully. cmd = ]
(10056) AT+LVOFLOCK=1,0
04-14 [Link] FactoryTest : [AtParser$process](10056)
04-14 [Link] FactoryTest : [FtClient$mBroadcastReceiver](9770) action= =
[Link].CSC_MODEM_SETTING
04-14 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](9770)
mConnectionMode = gsm
04-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](9770)
onReceive action=[Link].CSC_MODEM_SETTING
04-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentCscModemSetting](9770) get
CSC_MODEM_SETTING in FactoryTestBroadcastReceiver
04-14 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](9770)
mConnectionMode = gsm
04-14 [Link] FactoryTest : [FtUtil$showFirstLog](9770) res: false
05-29 [Link] FactoryTest : [FactoryTestBroadcastReceiver$ModuleCommon](12579)
EFS_FACTORYAPP_ROOT PATH : /efs/FactoryApp/
05-29 [Link] FactoryTest : [ModuleCommon$ModuleCommon](12579) Create
ModuleCommon
05-29 [Link] FactoryTest : [ModuleCommon$readFactoryMode](12579) mode: ON
05-29 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12579)
KEYSTRING_BLOCK is already existed...
05-29 [Link] FactoryTest : [FactoryTestBroadcastReceiver$initFailhist](12579)
Failhist Version is not V3
05-29 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12579)
onReceive boot mode = 0
05-29 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12579)
onReceive action=[Link].BOOT_COMPLETED
05-29 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompleted](12579) [MSP_SEQ][BOOTING
COMPLETED][ING : received IntentBootCompleted -> waiting connect FtClient]
05-29 [Link] FactoryTest : [FactoryTestBroadcastReceiver$ModuleCommon](12579)
EFS_FACTORYAPP_ROOT PATH : /efs/FactoryApp/
05-29 [Link] FactoryTest : [ModuleCommon$readFactoryMode](12579) mode: ON
05-29 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12579)
KEYSTRING_BLOCK is already existed...
05-29 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompletedWhenUserBinary](12579) Boot
completed, IS_FACTORY_BINARY = USER MODE
05-29 [Link] FactoryTest : [FtUtil$isEMATCmd](12579) Unknown error
05-29 [Link] FactoryTest : [ModuleCommon$connectedJIG](12579) ...
05-29 [Link] FactoryTest : [ModuleCommon$connectedJIG](12579) cable_type =
ANYWAY_JIG
05-29 [Link] FactoryTest : [ModuleCommon$connectedJIG](12579) value = No VPS,
JIG_ON = JIG, JIG_ON_1KOHM = FACTORY UART
05-29 [Link] FactoryTest : [ModuleCommon$connectedJIG](12579) adc_value =
null
05-29 [Link] FactoryTest : [ModuleCommon$connectedJIG](12579) raw_adc_value =
null
05-29 [Link] FactoryTest : [ModuleCommon$isRunningFtClient](12579)
RUNNING_FTCLIENT : false
05-29 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$startDummyFtClientForBootCompleted](12579) start
DummyFtClient service for APO
05-29 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompletedWhenUserBinary](12579) Stop
at_distributor
05-29 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompletedWhenUserBinary](12579) stop
at_distributor
05-29 [Link] FactoryTest : [ModuleCommon$disableFtClient](12579) ...
05-29 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12579)
onReceive boot mode = 0
05-29 [Link] FactoryTest : [DummyFtClient$onCreate](12579) Create
DummyFtClient service
05-29 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](12579)
mConnectionMode = gsm
05-29 [Link] FactoryTest : [DummyFtClient$onStartCommand](12579) ...
05-29 [Link] FactoryTest : [DummyFtClient$sendBootCompletedAndFinish]
(12579) ...
05-29 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](12579)
mConnectionMode = gsm
05-29 [Link] FactoryTest : [IPCWriterToSecPhoneService$ResponseWriter](12579)
Create IPCWriterToSecPhoneService
05-29 [Link] FactoryTest :
[IPCWriterToSecPhoneService$connectToSecPhoneService](12579)
05-29 [Link] FactoryTest : [IPCWriterToSecPhoneService$onServiceConnected]
(12579) [MSP_SEQ][BOOTING COMPLETED][ING : connected SecPhoneService -> waiting
sending IPC to RIL]
05-29 [Link] FactoryTest : [IPCWriterToSecPhoneService$write](12579) Send
Response Message to SecPhone
05-29 [Link] FactoryTest : [IPCWriterToSecPhoneService$write](12579) Response
####
05-29 [Link] FactoryTest : [IPCWriterToSecPhoneService$handleMessage](12579)
[MSP_SEQ][BOOTING COMPLETED][PASS : sent IPC to RIL. The Message was sent
successfully]
05-29 [Link] FactoryTest :
[IPCWriterToSecPhoneService$disConnectSecPhoneService](13086)
05-29 [Link] FactoryTest : [ProtectedFactoryTestBroadcastReceiver$onReceive]
(12579) onReceive action=[Link].SECPHONE_READY
05-29 [Link] FactoryTest : [ProtectedFactoryTestBroadcastReceiver$onReceive]
(12579) [Link].SECPHONE_READY
05-29 [Link] FactoryTest : [DummyFtClient$onDestroy](12579) Destroy
DummyFtClient service
05-29 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](12579)
mConnectionMode = gsm
05-29 [Link] FactoryTest : [ModuleCommon$isRunningFtClient](12579)
RUNNING_FTCLIENT : false
05-29 [Link] FactoryTest : [DummyFtClient$onDestroy](12579) kill process
09-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$ModuleCommon](12899)
EFS_FACTORYAPP_ROOT PATH : /efs/FactoryApp/
09-14 [Link] FactoryTest : [ModuleCommon$ModuleCommon](12899) Create
ModuleCommon
09-14 [Link] FactoryTest : [ModuleCommon$readFactoryMode](12899) mode: ON
09-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12899)
KEYSTRING_BLOCK is already existed...
09-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$initFailhist](12899)
Failhist Version is not V3
09-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12899)
onReceive boot mode = 0
09-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12899)
onReceive action=[Link].BOOT_COMPLETED
09-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompleted](12899) [MSP_SEQ][BOOTING
COMPLETED][ING : received IntentBootCompleted -> waiting connect FtClient]
09-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$ModuleCommon](12899)
EFS_FACTORYAPP_ROOT PATH : /efs/FactoryApp/
09-14 [Link] FactoryTest : [ModuleCommon$readFactoryMode](12899) mode: ON
09-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12899)
KEYSTRING_BLOCK is already existed...
09-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompletedWhenUserBinary](12899) Boot
completed, IS_FACTORY_BINARY = USER MODE
09-14 [Link] FactoryTest : [FtUtil$isEMATCmd](12899) Unknown error
09-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](12899) ...
09-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](12899) cable_type =
ANYWAY_JIG
09-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](12899) value = No VPS,
JIG_ON = JIG, JIG_ON_1KOHM = FACTORY UART
09-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](12899) adc_value =
null
09-14 [Link] FactoryTest : [ModuleCommon$connectedJIG](12899) raw_adc_value =
null
09-14 [Link] FactoryTest : [ModuleCommon$isRunningFtClient](12899)
RUNNING_FTCLIENT : false
09-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$startDummyFtClientForBootCompleted](12899) start
DummyFtClient service for APO
09-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompletedWhenUserBinary](12899) Stop
at_distributor
09-14 [Link] FactoryTest :
[FactoryTestBroadcastReceiver$processIntentBootCompletedWhenUserBinary](12899) stop
at_distributor
09-14 [Link] FactoryTest : [ModuleCommon$disableFtClient](12899) ...
09-14 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](12899)
onReceive boot mode = 0
09-14 [Link] FactoryTest : [DummyFtClient$onCreate](12899) Create
DummyFtClient service
09-14 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](12899)
mConnectionMode = gsm
09-14 [Link] FactoryTest : [DummyFtClient$onStartCommand](12899) ...
09-14 [Link] FactoryTest : [DummyFtClient$sendBootCompletedAndFinish]
(12899) ...
09-14 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](12899)
mConnectionMode = gsm
09-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$ResponseWriter](12899)
Create IPCWriterToSecPhoneService
09-14 [Link] FactoryTest :
[IPCWriterToSecPhoneService$connectToSecPhoneService](12899)
09-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$onServiceConnected]
(12899) [MSP_SEQ][BOOTING COMPLETED][ING : connected SecPhoneService -> waiting
sending IPC to RIL]
09-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$write](12899) Send
Response Message to SecPhone
09-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$write](12899) Response
####
09-14 [Link] FactoryTest : [IPCWriterToSecPhoneService$handleMessage](12899)
[MSP_SEQ][BOOTING COMPLETED][PASS : sent IPC to RIL. The Message was sent
successfully]
09-14 [Link] FactoryTest :
[IPCWriterToSecPhoneService$disConnectSecPhoneService](13571)
09-14 [Link] FactoryTest : [ProtectedFactoryTestBroadcastReceiver$onReceive]
(12899) onReceive action=[Link].SECPHONE_READY
09-14 [Link] FactoryTest : [ProtectedFactoryTestBroadcastReceiver$onReceive]
(12899) [Link].SECPHONE_READY
09-14 [Link] FactoryTest : [DummyFtClient$onDestroy](12899) Destroy
DummyFtClient service
09-14 [Link] FactoryTest : [ModuleCommon$isConnectionModeNone](12899)
mConnectionMode = gsm
09-14 [Link] FactoryTest : [ModuleCommon$isRunningFtClient](12899)
RUNNING_FTCLIENT : false
09-14 [Link] FactoryTest : [DummyFtClient$onDestroy](12899) kill process
09-27 [Link] FactoryTest : [FactoryTestBroadcastReceiver$ModuleCommon](18458)
EFS_FACTORYAPP_ROOT PATH : /efs/FactoryApp/
09-27 [Link] FactoryTest : [ModuleCommon$ModuleCommon](18458) Create
ModuleCommon
09-27 [Link] FactoryTest : [ModuleCommon$readFactoryMode](18458) mode: ON
09-27 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](18458)
KEYSTRING_BLOCK is already existed...
09-27 [Link] FactoryTest : [FactoryTestBroadcastReceiver$initFailhist](18458)
Failhist Version is not V3
09-27 [Link] FactoryTest : [FactoryTestBroadcastReceiver$onReceive](18458)
onReceive boot mode = 0
You might also like
- (SVC-09) IMEI Cloud Guide For Service Center User - Rev1.0No ratings yet(SVC-09) IMEI Cloud Guide For Service Center User - Rev1.018 pages
- Nokia Secret Codes and Reset InstructionsNo ratings yetNokia Secret Codes and Reset Instructions2 pages
- Unlock EC156 CDMA EVDO Tata Photon Plus Huawei 3G Modem50% (2)Unlock EC156 CDMA EVDO Tata Photon Plus Huawei 3G Modem83 pages
- How To Use QFIL To Backup Firmware From Qualcomm AndroidNo ratings yetHow To Use QFIL To Backup Firmware From Qualcomm Android22 pages
- 80nm2486sectoolsdebugpolicytooluserguide 910675277No ratings yet80nm2486sectoolsdebugpolicytooluserguide 91067527718 pages
- MTK and Spreadtrum Cpu Secret Code ListsNo ratings yetMTK and Spreadtrum Cpu Secret Code Lists6 pages
- SDM439 GPIO Configuration For QRD439+PMI632No ratings yetSDM439 GPIO Configuration For QRD439+PMI63233 pages
- MT6737 LTE Smartphone Application Processor Functional Specification V1.0No ratings yetMT6737 LTE Smartphone Application Processor Functional Specification V1.0288 pages
- Installing NetBackup Media Server Software On Linux Installing Server Software On UNIX Systems NetBackup™ Installation Guide Veritas™No ratings yetInstalling NetBackup Media Server Software On Linux Installing Server Software On UNIX Systems NetBackup™ Installation Guide Veritas™5 pages
- Creehack: Educational Purposes. Our Website Is Not Responsible For Any Illegal Use of This Application"No ratings yetCreehack: Educational Purposes. Our Website Is Not Responsible For Any Illegal Use of This Application"5 pages
- Introduction Android Development With KotlinNo ratings yetIntroduction Android Development With Kotlin24 pages
- USA Industries Piping Schedule Chart 1.3 USA Industries Piping Schedule Chart 1.3No ratings yetUSA Industries Piping Schedule Chart 1.3 USA Industries Piping Schedule Chart 1.3194 pages
- The Internet American English Student A2 B1No ratings yetThe Internet American English Student A2 B17 pages
- GE 1109 Final Exam Question 2023 (Shared)No ratings yetGE 1109 Final Exam Question 2023 (Shared)5 pages
