product

Catalog
2
The MultiNeOTM implant is based on over three decades of proven clinical studies & experience and it is
a direct derivative of the company's mission to provide high quality, innovative, simple to use products.

For more information on the MultiNeO implant system, refer to the following sections:

MultiNeO Implant Internal Hex Connection- Page 30

MultiNeO Implant Conical Narrow Connection- Page 61
MultiNeO Implant Conical Standard Connection- Page 81

3
 Table of Contents

Introduction
Simplantology, In Everything We Do! 6
Smart Implantology Solutions – 8
Our Portfolio
Nanotec Implant Surface 12
Advanced Implant Package 13
Kits and Drills
Surgical Kits 16
Guided Surgery Tool Kit (GSTK) 18
Stopper Kit 20
Surgical Drills and Trephines 21
Coated Drill Line 22
Implant Insertion Tools 24
Surgical Accessories 26
Prosthetic Insertion Tools 27
Internal Hex Connection (IH)
Implants
MULTINEO IH Implant 30
MULTINEO IH Drilling Sequence 32
ICE Implant 34
ICE Drilling Sequence 36
Spiral Implant 38
Spiral Drilling Sequence 40
DFI Implant 42
DFI Drilling Sequence 42

Prosthetic Line (IH) Healing abutments 44

Implant impression 46
Cement-retained restorations 48
Temporary PEEK abutments 50
Temporary titanium abutments 51
Cement- retained esthetic abutments 52
Casting abutments 53
Implant analogs 53
Prosthetic screws 53
Screw-retained restorations 54
CAD/CAM restorations 56
Overdenture restorations 58

Conical Narrow Connection (CHC)

Implants
MULTINEO CHC Implant 61
MULTINEO CHC Drilling Sequence 64
NICE Implant System 66
NICE Drilling Sequence 66

4
Conical Narrow Connection (CHC)

Prosthetic Line (CHC)

Healing abutments 68
Implant impression 69
Implant analogs 69
Cement-retained esthetic abutments 70
Prosthetic screws 72
Casting abutments 72
Screw-retained restorations 74
CAD/CAM restorations 76
Overdenture restorations 78

Conical Standard Connection (CS)

Implants
MULTINEO CS Implant 81
MULTINEO CS Drilling Sequence 84

Prosthetic Line (CS) Healing abutments 86

Implant impression 87
Implant analogs 87
Cement-retained esthetic abutments 88
Temporary titanium abutments 88
Casting abutments 88
Screw-retained restorations 89
CAD/CAM restorations 91
Screws 91
Overdenture restorations 93

Guided Surgery
Guided Surgery Tool Kit (GSTK) 94
GSTK Surgical sleeves 96
GSTK drills and tools 97

Appendices

Product list and reference numbers 99

Alpha-Bio Tec.'s Warranty 112

5
 Simplant l gy,
in Everything
We Do!
At Alpha-Bio Tec., we address the needs of dental professionals, leverage our experience and technologies,
utilize experts and invest in research, training and education. All this results in Simplantology: cost-
effective solutions that simplify dental implantology procedures and deliver proven clinical success.

DELIVERING top-quality, simple-to-use products

We have mastered the art of simplifying implant technology by developing a surgical kit that fits all our products -
implants, abutments and surgical tools. Our surgical kit includes basic surgical instrumentation to advanced therapy
tools, and is compatible with all product systems. This means that fewer tools are needed to achieve successful
results. It simplifies the workflow and minimizes the learning curve. With an overall implant clinical survival rate of
99.6%*, our top-quality implant systems are based on two platforms and three connections with a simple restoration
process.

LEVERAGING experience and technologies

We leverage our experience and technologies to ensure that our products offer the best value-for-money. For
over three decades, we have been focusing on the development and manufacturing of dental implants and their by
superstructures & complementary products. Our cutting-edge, in-house manufacturing facility, which is operational
24/7, includes a dedicated QA department to ensure the highest possible standards and quality of our products and
the provision of a lifetime warranty for our dental implants.

UTILIZING research and experts

Our R&D teams collaborate closely with an international panel of experts who have extensive clinical and academic
knowledge. We also invest in preclinical in vivo research, clinical trials, histological studies and in vitro laboratory
studies. We are also active in all research fields, including basic research, preclinical studies and clinical trials.

TRAINING AND EDUCATING our customers

We firmly believe that sharing our know-how and experience is central to ensuring successful and effective
implantology work. Every year, we provide more than 150 courses around the world, where we train our customers
concerning the latest dental implantology procedures and workflow methods. Course curriculums are based
on theoretical background and practical tools covering a range of subjects, including basic implantology, tilted
implantation & restoration, guided bone & tissue regeneration, immediate implantation and immediate loading,
guided surgery and digital workflows.

EMBRACING the digitalization of the dental world

We embrace the technological changes involved in the digitalization of the dental world in order to support
the present and future needs of our customers. Consequently, our digital CAD/CAM line offers a wide range of
restoration products for our three implant connections. Additionally, our Guided Surgery Tool Kit supports surgery
methods and enables dentists to select the software to use when planning surgeries, making their work simpler,
more precise and minimally invasive.

*Strietzel F.P., Karmon B., Lorean A., Fischer P. P. Implant-prosthetic rehabilitation of the edentulous maxilla and mandible with immediately loaded Implants
preliminary data from a retrospective study, considering time of implantation. JOMI The international Journal of Oral and Maxillofacial Implants 2011, V 26,
1: 139-147

6
IMPLANT SYSTEMS
From Internal Hex implants to Conical Hex implants, we offer an entire range of implants, so that each
physician can find the precise and most convenient implant to work with at any given moment.

Prosthetics & CAD/CAM

For each of our implant connections we offer a wide range of options for any clinical need, including
fixed and removable restorations, screw based, cemented prosthesis and a wide range of digital CAD/
CAM parts. All parts are designed for ease of use and high esthetic appearance.

SURGICAL INSTRUMENTATION
Our universal surgical kit is another demonstration of Alpha-Bio Tec.'s commitment to simplicity.
This one kit provides surgeons all the tools needed to perform most of the procedures, from marking
the drilling point to inserting the implant into its final position. Implant orientation tools for the final
restoration are also included. Each kit can be customized to meet the dental professional needs. In
addition, as digital enablers, Alpha-Bio Tec.'s Guided Surgery Tool Kit enables accurate and predictable
implant procedures using the planning software of the dentist's choice.

7
1988 1999 2005
Alpha-Bio Tec. Launch of Launch of
is founded DFI implant Arrow line

1996 2003 2013

Launch of Launch of Launch of
ATID implant Spiral implant ICE implant

Alpha-Bio Tec. has mastered Alpha-bio Tec. offers:

the art of incorporating
• High quality products
implants and implant
• A range of implant systems for
based prosthetics into the
surgical procedures in bone types I-IV.
daily routine of dental
• Solutions for immediate or delayed
professionals, by developing
implant placement & loading in wide or
products that are narrow ridges.
sophisticated by design
AND very simple to use.

8
2014 2016 2020
Launch of Launch of Move to new
NICE implant MultiNeO implant modern facilities

2015 2017
Launch of CAD/CAD Launch of Alpha Universe
Digital Solutions Multi-Unit One Piece

Smart Implantology Simplified Implantology:

Solutions
Alpha-Bio Tec. implant system is:
• Innovative and easy to use
Top Quality Products
• Offers simple solutions

• Requires fewer instruments

for the procedure

9
 Ø3.3, Ø3.7N*, Ø3.75, Ø4.2, Ø4.65*, Ø5.0, Ø5.3*, Ø6*

* Diameters available for certain implants only.

Diameters and length information for the various implant systems is available on the respective pages.

10
 Ø3.75, Ø4.2, Ø5.0 Ø3 .2 ,Ø3.5*

* Diameters available for certain implants only.

11
 IMPLANT
SURFACE
Worldwide scientific research has proven that the implant surface plays a pivotal role in achieving osseointegration. It
has been well documented that surface characteristics of implanted materials highly influence the healing and growth
of tissues adjacent to the implant surface.

Alpha-Bio Tec.'s implants are made of Titanium alloy Ti 6Al 4V ELI, a strong, durable and highly biocompatible material.
Years of intense research and development lead Alpha-Bio Tec. to develop NanoTecTM implant surface for optimized
osseointegration.

NanoTec implant surface is achieved through a process that involves sandblasting and a double thermal etching for the
creation of micropores (sized 1-5 microns). This unique process creates a high surface area differentiation, increases
the three-dimensional (3D) surface area and thus, enables a more intense absorption of blood and plasma proteins
directly into the implant's micropores immediately after its placement.

The micro-structure and roughness properties of the implant surface created by the sandblasting and double acid
etching process, greatly influence the initial contact with the host bone.

The NanoTec process creates a high surface area which contributes to:
• Early osseointegration immediately after placement
• High long-term BIC (Bone to Implant Contact)
• Increased secondary stability
• Higher predictability

SEM of implant surface Histology of the MultiNeo Implant*

Magnification: X 1000 Magnification: X 3000

* References: Light Microscopy images of the non-decalcified histology staining with Toluidine Blue – Fuchsin. Parietal bone of Sinclair mini pig.
The study was performed at GLPigs, the Pre- Clinical Research Unit at Assaf Harofeh Medical Center, Israel. The surgeries were performed by
Prof. Ofer Moses and Dr. Omer Cohen (Tel-Aviv University, Israel). Histology performed by Prof. Dr. Dieter D. Bosshardt from the Robert K.
Schenk Laboratory of Oral Histology, University of Bern, Switzerland.

12
 Advanced
Implant package

Implant Package Identification Labels

A modern and Label indicates the implant type,

easy-to-use implant package with length, diameter and connection
enhanced ergonomics. (CHC / CS / IH).

L6 L8 L10 L11.5 L13 L16

Color-coded Holder Stackable packaging

Holders are color-coded for easy The unique design enables

identification of implant length. efficient storage & easy visual
identification.

L6 L8 L10 L11.5 L13 L16

1 2 3 4
Tear the cardboard. Pull the Tyvek®. Remove the inner holder. Open the cap - easy one-hand
operation.

5 6 7 8
Insert the dedicated driver Remove the connected implant Implant can be Remove cover screw using an
clockwise (Ratchet wrench is for from the package. inserted directly to site. appropriate prosthetic driver.
illustration purposes only).

13
14
Kits,
Drills
&Tools
Alpha-Bio Tec. is dedicated to making the work of dental professionals as simple as

possible. Therefore, we have developed one universal kit with all the tools needed to

perform most of the clinical procedures. Each kit can be customized both in size and in

tray content to meet clinical needs.

In addition, all drills and tools presented in this chapter are compatible with all implant

systems and prosthetic parts (unless indicated otherwise).

15
One Kit for All Implant Systems

SURGICAL KIT

Alpha-Bio Tec.'s surgical kit is suitable for all procedures and implant systems.

• Ergonomic, light and compact, easy to carry

• Clear, color-coded visual design, provides easy and intuitive accessibility
• Laser etched marking on the tray including a dimension bar for effective
drill depth verification
• Autoclaveable
• Box and tray are made of Radel®
• Stainless steel bath
• Box dimensions : 19 cm X 14 cm X 6 cm

Ordering Information: Ref. No. 4699

Kit is provided empty. Tools and drills must be ordered separately.

Mini Surgical Box

A light and compact design for your individual needs.

• Box and tray are made of Radel®

• Autoclavable
• Stainless steel bath
• Box dimensions: 10 cm X 8.5 cm X 5 cm

Ordering Information:

Ref. No. 4611 Straight drills mini kit

Ref. No. 4774 Step drills mini kit

Ref. No. 4775 Step drills mini kit without dish

Kit is provided empty. Tools and drills must be ordered separately.

16
One Kit for All Implant Systems

KITS & INSTRUMENTS

Torque Wrench

IDG Depth Probe

Parallel / Depth guide

Step Drills

Straight Drills

Dimension Bar for

Prosthetics IH Drivers CHC Drivers CS Drivers Effective drill depth

One kit for all implants One-hand opening option Coated drills Dimension bar for drill depth

The kits demonstrated are for illustration purposes only. Contents may vary in different markets.

Kit is provided empty. Tools and drills must be ordered separately.

17
 Guided Surgery Tool Kit (GSTK)

Use the software of your choice with the Alpha-Bio Tec. GSTK

The kit is available in 3 different configurations:

Full guided surgery kit for Internal Hex (IH)

Ref., KIT#65000
and Conical Narrow Connections (CHC)

Full guided surgery kit for Conical Standard (CS)

Ref., KIT#65002
and Conical Narrow Connections (CHC)

Full guided surgery kit for Internal Hex (IH),

Ref., KIT#65003 Conical Standard (CS)
and Conical Narrow Connections (CHC)

* Note: The ratchet is NOT included in the kit.

18
Guided Surgery Tool Kit (GSTK)

KITS & INSTRUMENTS

Use the software of your choice with the Alpha-Bio Tec. GSTK
The tray features a modular layout.
The contents are organized to support the entire guided surgery procedure from site preparation to final implantation.
All kit components fit the matching master sleeves.

1 2 3 4
SITE IMPLANT TOOLS &
PREPARATION OSTEOTOMY PLACEMENT ACCESSORIES

19
surgical INSTRUMENTATION

Stopper Kit
• Compact, ergonomic and esthetic design
• Properly organized, all parts are clearly visible and easily accessed
• Laser markings on both box and stoppers
• Easy cleaning and autoclavable
• Dedicated stoppers extractions grooves
• Materials: Box - Radel®, Cover – PPHT
• Dimension: 13 cm X 9.5 cm X 3 cm

Ordering Information: Ref. No. 4612

Kit is provided with 20 stoppers

Drill Stoppers

• Compatible with Alpha-Bio Tec. coated DNT2 • The stoppers are made from stainless steel, are reusable
surgical drills and autoclavable.

Drill Group A: Ø 2.0 - Ø 2.4 Group B: Ø 2.8- Ø 3.0

Diameter

Drill L6 L8 L10 L11.5 L13 L6 L8 L10 L11.5 L13

Depth

Code DS-A-L6 DS-A-L8 DS-A-L10 DS-A-L11.5 DS-A-L13 DS-B-L6 DS-B-L8 DS-B-L10 DS-B-L11.5 DS-B-L13

Ref. No. 4561 4562 4563 4564 4565 4566 4567 4568 4569 4570

Drill Group C: Ø 3.2 - Ø 3.65 Group D: Ø 4.1 - Ø 4.5

Diameter

Drill L6 L8 L10 L11.5 L13 L6 L8 L10 L11.5 L13

Depth

Code DS-C-L6 DS-C-L8 DS-C-L10 DS-C-L11.5 DS-C-L13 DS-D-L6 DS-D-L8 DS-D-L10 DS-D-L11.5 DS-D-L13

Ref. No. 4573 4574 4575 4576 4577 4578 4579 4580 4581 4582

20
Surgical Drills and Trephines

KITS & INSTRUMENTS

Other Drills (Stainless steel)

Countersink Drill Extension Marking Drill

16 mm
13 mm
11.5 mm
7.8 mm Ø 5 mm 10 mm
8 mm
5.55 mm Ø 4.2 mm 6 mm
4.5 mm Ø 3.85 mm
2.5 mm Ø 2.7 mm
0 mm 0 mm
2.7 mm

Diameter 2.7-5.9 mm 1.5 mm

Code CS DX MRDX1.5

Ref. No. 4672 4240 4712C

For preparation of a bevel within the For marking of the

Instructions Extends drills by 17.5 mm
cortical plate of the alveolar crest cortical plate of the alveolar crest

Round Burr (Stainless steel) Trephine Burs (Stainless steel)

16 mm
15 mm
13 mm
11.6 mm
10 mm
8 mm
6 mm

Ø4mm Ø5mm
Ø5mm Ø6mm

Diameter 3 mm Diameter 4 mm 5 mm

Code RB3 Code DRT4 DRT5

Ref. No. 4304 Ref. No. 4940 4950

For various bone manipulations, such as penetration

Instructions Instructions For bone harvesting and implant removal
of the cortical plate of the alveolar crest

21
coated drill line

• A comprehensive, easy to use drill line • Long life span and high corrosion resistant
• Color coded • Compatible with all drill stoppers
• High contrast and clear depth marks
• Multi-layer dark grey coating

Coated Coated
Straight Step
Drills Drills

Color Coding
19.5 mm

16 mm

13 mm
11.5 mm
10 mm

8 mm

6 mm

Ø 3.65

Ø 3.2

0 mm

Coated Straight Drills

Ø 2.0 Ø 2.4 Ø 2.8 Ø 3.0 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5 Ø 4.8 Ø 5.2 Ø 5.8

Code BD2.0 BD2.4 BD2.8 BD3.0 BD3.2 BD3.65 BD4.1 BD4.5 BD4.8 BD5.2 BD5.8

Ref. No. 4550 4551 4552 4553 4554 4555 4556 4557 4558 4559 4560

Coated Step Drills

Ø 2.0/2.4 Ø 2.4/2.8 Ø 2.8 /3.0 Ø 2.8/3.2 Ø 3.2/3.65 Ø 3.65/4.1 Ø 4.1/4.5 Ø 4.5/4.8 Ø 4.8/5.2

Code BSD2.0-2.4 BSD2.4-2.8 BSD2.8-3.0 BSD2.8-3.2 BSD3.2-3.65 BSD3.65-4.1 BSD4.1-4.5 BSD4.5-4.8 BSD4.8-5.2

Ref. No. 4590 4592 4593 4594 4595 4596 4597 4598 4599

22
 KITS & INSTRUMENTS
Illustration of the drilling protocol for the MultiNeO implant
Ø3.75 / 13 mm implant, using step drills in bone type II / III.

1 Drill with the 2 mm drill 2 Drill with the 2.4 / 2.8 mm step drill

3 Drill with the 2.8 / 3.2 mm step drill 4 Insert the implant into the prepared osteotomy

Illustration of the drilling protocol for the MultiNeO implant

Ø3.75 / 13 mm implant, using straight drills in bone type II / III.

1 Drill with the 2 mm drill 2 Drill with the 2.8 mm straight drill

3 Drill with the 3.2 mm straight drill 3mm 4 Insert the implant into the prepared site
shorter than the implant's length

23
IMPLANT INSERTION TOOLS

Implant insertion tools for Conical

Narrow Connection (CHC)

Short Standard Long Short Motor Long Motor Manual

2.1 mm 2.1 mm 2.1 mm Mount 2.1 mm Mount 2.1 mm 2.1 mm

23 mm

20 mm 16 mm

15 mm
12 mm

10 mm

2.1 mm 2.1 mm 2.1 mm 2.1 mm 2.1 mm 2.1 mm

Code ITD2.1S-CHC ITD2.1-CHC ITD2.1L-CHC IT2.1S M-CHC IT2.1L M-CHC MITD2.1 CHC

Ref. No. 7302 7305 7301 7304 7303 4147

Instruc- Fits hexagonal 6.35 mm or square 4 mm ratchet For use with a contra-angle motor For manual use
tions

Implant insertion tools for Conical

Standard Connection (CS)

Short Driver Long Short Motor Long Motor Manual

2.5 mm 2.5 mm Mount 2.5 mm Mount 2.5 mm 2.5 mm

23 mm

16 mm
15 mm
12 mm

10 mm

2.5mm 2.5mm 2.5 mm 2.5mm 2.5 mm

Code ITD2.5 S CS ITD2.5 L CS IT2.5 SM CS IT2.5 LM CS MITD2.5-CS

Ref. No. 3801 3803 3804 3805 3806

Fits hexagonal 6.35 mm or square 4 mm ratchet

Instructions For use with a contra-angle motor For manual use

24
IMPLANT INSERTION TOOLS

KITS & INSTRUMENTS

Implant insertion tools for Internal Hex Connection (IH)

Short Long Motor

Short Standard Long Manual
Motor Mount Mount
2.5 mm 2.5 mm 2.5 mm 2.5 mm
2.5/1.25 mm 2.5/1.25 mm

23 mm

16 mm

16 mm
12 mm

10 mm
6 mm

2.5 mm 2.5 mm 2.5 mm 2.5 mm 2.5 mm 2.5 mm

Code G-ITDS2.5 G-ITDM2.5 G-ITDL2.5 GITS2.5/1.25 GITL2.5/1.25 MITD2.5-IH

Ref. No. 4142 4141 4140 4145 4143 4146

Instruc- For manual

tions Fits hexagonal 6.35 mm or square 4 mm ratchet For use with a contra-angle motor use

Internal Hex Insertion Drivers Internal Hex Contra-Angle Drivers

(Stainless Steel) (Stainless Steel)

Motor Mount Short Motor Mount

2.5 mm Short 2.5 mm
2.5/1.25 mm 2.5/1.25 mm

4.0 mm 4.0 mm
4 mm

27 mm

20 mm
6 mm
9.5 mm 2.5 mm
5 mm
2.5 mm 4 mm
3 mm
2 mm*

1.25 mm 2.5 mm 1.25 mm 2.5 mm

Code ITD 2.5 S ITD 2.5 SS Code IT 2.5M+ ITS 2.5/1.25

Ref. No. 4152 4153 Ref. No. 4161 4071

Compatible with hexagonal 6.35 mm or Used for implant insertion or tightening cover
Instructions square 4 mm wrench or surgical screw driver Instructions
screws, healing abutments and 1.25 mm screws.

* Compatible with Spiral, DFI and ICE implants provided in packaging with mounted implants.

25
 Parallel, Depth Guides & Surgical Accessories

Surgical Screwdriver Ref. No. 4220

(Stainless Steel) Code: SDH

Used with 6.35 mm hexagonal head.

Universal Torque Ratchet Ref. No. 4572

10-45 Ncm (Stainless Steel) Code: URT

Allows clinicians to accurately apply the recommended torque when using prosthetic or surgical drivers.
Can be adapted for use with the 4 mm square heads drivers when using USH 4012.

Parallel/Depth Guide (Titanium) Parallel Guide (Titanium)

3.0 mm
7 mm

2.1 mm
7 mm

16 mm
10 mm

1.0 mm

1.9 mm 7.0 mm

Code PDG PDGS PG

Ref. No. 4080 4081 4082

For accurate measurement of osteotomy depth, Used for precise spacing and
Instructions
parallel check and X-ray distortion. Each step is 1 mm. parallel implant placement.

* Compatible with Internal Hex & Conical Hex Connection platforms.

IDG IMPLANT DEPTH PROBE (Stainless steel)

2.7 mm

2.7 mm

16 mm
11.5 mm 13 mm
8 mm 10 mm
6 mm

1.9 mm 1.9 mm

Code IDG

Ref. No. 4100

Double sided measuring probe: 1.9 mm width of the rounded apex is used for examinations of osteotomy made
by the 2 mm drill. 2.7 mm width of the rounded apex is used for examinations of osteotomy made by the 2.8 mm drill.
Instructions
Can be used in various treatments: checking osteotomy depth, examination of the Schneiderian
membrane, bone condensing and others.

26
PROSTHETICS INSERTION TOOLS

KITS & INSTRUMENTS

HEX DRIVERS

HEX DRIVERS 1.25 MM (STAINLESS STEEL)

Manual Grip Short Manual

Long Hex Driver Hex Driver Short Hex Driver Motor Mount
Driver Grip Driver

Ø 7.85 mm Ø 7.85 mm 6.35 mm 6.35 mm 4.0 mm

4 mm

21 mm

7 mm
11.5 mm
1.25 mm 14.5 mm

20 mm 1.25 mm 1.25 mm
13 mm

1.25 mm

1.25 mm

1.25 mm

Code HHS 1.25 HHSS 1.25 HTD 1.25L HTD 1.25 HTD 1.25 S HT 1.25M

Ref. No. 4052 4053 4061 4055 4056 4165

For use with a

For manual use Fits hexagonal 6.35 mm or square 4 mm ratchet
contra-angle motor
Instructions
Compatible with all healing abutments, cover screws, transfer screws and most abutments.

HEX DRIVERS 1.5 MM (STAINLESS STEEL)

Hex Driver Short Hex Driver Manual Driver Long Manual Driver Motor Mount
1.5mm 1.5mm 1.5mm 1.5mm 1.5 mm

23 mm 15.5 mm 18.1 mm
28.1 mm
21 mm
7 mm
1.5 mm 7 mm

14.5 mm 1.5 mm

1.5 mm
13 mm
1.5 mm

Code HTD 1.5 HTD 1.5S HHS 1.5 HHL 1.5 HT 1.5

Ref. No. 4057 4058 4059 4060 4168

Fits hexagonal 6.35 mm For use with a contra-

For manual use
or square 4 mm ratchet angle motor
Instructions

For use with Multi-Unit straight abutments only (TCT). See pages 54, 55, 74, 75, 89, 90

27
 Internal Hex
Connection (IH)
Alpha-Bio Tec.'s Internal Hex platform enables a simple restoration procedure.

connection internal hex internal hex

Active implant designed for immediate implant

The original spiral implant
procedures in a variety of bone types

recommended
bone type

• Tapered • Osteotome-like condensing body

DESIGN • Centering and anchoring features • Pronounced tapered core
FEATURES • Double, variable threads • Apical part with sharp deep threads
• Micro-threads

• High primary stability • High primary stability

• Reduced marginal bone loss • Easy & smooth insertion
Clinical • Increased surface area • Redirection capabilities
Benefits • Increased BIC • Reduced marginal bone loss
• Increased BIC

ULTIMATE Dynamic
Highly
recommended Optional * Formerly SPI

28
 Internal Hex Connection
Ø3.3, Ø3.7N*, Ø3.75, Ø4.2, Ø4.65*, Ø5.0, Ø5.3*, Ø6*

internal hex internal hex HEXAGONE INTERNE

For cases of classic implant placement, Cylindrical, slightly tapered implant Implant cylindrique traditionnel pour
immediate placement & loading for a wide range of dental procedures des résultats excellents.

• Cylindrique
• Moderately tapered • Slightly tapered
• Parois parallèles
• Back tapered coronal part** • Double thread design with
• Filetages multiples
• Split coronal micro-threads variable threads
• Surface de contact
maximum

• Amélioration du BIC
• Improved stress distribution • Easily stabilized & controlled
(Contact os-implant)
• Supports wide range of during placement
• Insertion homogène
clinical cases • Long-term stability
• Esthétique parfaite
• Controlled bone penetration • Large surface area
• Pression minimale exercée
sur l’os dur

Universal classic

** ICE implants with Ø4.2, Ø4.65 and Ø5.3 in lengths 10 mm and longer.

29
 MULTINEO SYSTEM multiple options

Multiple Options

recommended bone type

• High primary stability

• Tapered
• Reduced marginal bone
• Centering and anchoring features Clinical
DESIGN FEATURES loss
• Double, variable threads Benefits
• Increased surface area
• Micro-threads
• Increased BIC

Highly
recommended Optional

Dimensions
Ø Diameter Length Ref. No.
A B C D H
Ø 3.75 8 mm 1968 Ø 3.75 Ø 3.1 Ø 1.8 Ø 3.5 Ø 2.5

10 mm 1960 Ø 3.75 Ø 2.9 Ø 1.5 Ø 3.5 Ø 2.5

11.5 mm 1961 Ø 3.75 Ø 2.9 Ø 1.5 Ø 3.5 Ø 2.5

13 mm 1963 Ø 3.75 Ø 2.9 Ø 1.5 Ø 3.5 Ø 2.5

16 mm 1966 Ø 3.75 Ø 2.9 Ø 1.5 Ø 3.5 Ø 2.5

Ø 4.2 8 mm 1978 Ø 4.2 Ø 3.55 Ø 1.8 Ø 3.5 Ø 2.5

10 mm 1970 Ø 4.2 Ø 3.3 Ø 1.8 Ø 3.5 Ø 2.5

11.5 mm 1971 Ø 4.2 Ø 3.3 Ø 1.8 Ø 3.5 Ø 2.5

13 mm 1973 Ø 4.2 Ø 3.3 Ø 1.8 Ø 3.5 Ø 2.5

16 mm 1976 Ø 4.2 Ø 3.3 Ø 1.8 Ø 3.5 Ø 2.5

Ø 5.0 8 mm 1988 Ø 5.0 Ø 4.4 Ø 2.6 Ø 3.5 Ø 2.5

10 mm 1980 Ø 5.0 Ø 4.1 Ø 2.3 Ø 3.5 Ø 2.5

11.5 mm 1981 Ø 5.0 Ø 4.1 Ø 2.3 Ø 3.5 Ø 2.5

13 mm 1983 Ø 5.0 Ø 4.1 Ø 2.3 Ø 3.5 Ø 2.5

implant system

Implant Package Drivers

A modern and Color coded grip drivers
easy-to-use implant with gingival height
package with enhanced IH
markings and lead pin
ergonomics. for centering and easy
insertion.

30
MULTINEO SYSTEM

Internal Hex Connection

multiple options

Coronal Part
Design Features:
• Platform Switching
• Micro-threads
• Cutting flutes
• Internal hex and Conical standard
Clinical Benefits:
• Reduced pressure on cortical area
• Efficient cutting ability
• Improved bone preservation
• High initial stability

Implant Threads
Design Features:
• Variable thread design
• Double thread with 2.4mm step
• Micro-threads
Clinical Benefits:
• High cutting efficiency
• Osteotome like body
• Fast and controlled insertion
• Increased surface area
• Increased BIC

Implant Body and Core

Design Features:
• Straight coronal part
• Slightly tapered body
• Tapered core
• Tapered apical part
Clinical Benefits:
• Osteotome like body
• High primary stability

Apical Part
Design Features:
• Narrow apex
• Sharp and deep threads
• Patented centering feature
Clinical Benefits:
• High primary stability
• Easy navigation and penetration
• Efficient cutting capability

31
 MULTINEO SYSTEM multiple options

Multiple Options

Step Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 3.2/ Ø 3.65
Cortical*
Ø 3.75

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 3.2 / Ø 3.65 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 3. 2 / Ø 3.65 Ø 3.65 / Ø 4.1
Cortical*
Ø 4.2

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 Ø 3.2 Ø 2.0 Ø 2.4 Ø 3.2 Ø 3.65 Ø 2.0 Ø 2.4 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5
/ Ø 2.8 / Ø 3.65 / Ø 2.8 / Ø 3.65 / Ø 4.1 / Ø 2.8 / Ø 3.65 / Ø 4.1 / Ø 4.5 / Ø 4.8
Ø 5.0 Cortical*

* Cortical – Drill through cortical plate with the larger diameter.

Straight Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I

Ø 3.75 Ø 2.0 Ø 2.4 Ø 2.8** Ø 2.0 Ø 2.8 Ø 3.2** Ø 2.0 Ø 2.8 Ø 3.2** Ø 3.65
Cortical*

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65** Ø 4.1
Ø 4.2 Cortical*

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5** Ø 4.8
Ø 5.0 Cortical*

* Cortical – Drill through cortical plate.

** 3mm shorter than implant's length. Note that drill can be replaced by a corresponding step drill throughout entire implant's length.
For more information, see step protocol.

Important: Professional considerations may be required for adaptations of the drill protocol in specific cases.

32
MULTINEO SYSTEM

Internal Hex Connection

multiple options

33
ICE Implant for Classical Esthetics

Recommended
bone type

• Moderately tapered
DESIGN
• Back tapered coronal part*
FEATURES
• Split coronal micro-threads

• Improved stress distribution

Clinical
• Supports wide range of clinical cases
Benefits
• Controlled bone penetration

Highly
recommended Optional

D
Dimensions
Ø Diameter Length Ref. No.
A B C D P
Ø 3.7N 10 mm 1000 Ø 3.7 Ø 2.2 Ø1 Ø 3.5 Ø 3.7

11.5 mm 1001 Ø 3.7 Ø 2.2 Ø1 Ø 3.5 Ø 3.7

13 mm 1003 Ø 3.7 Ø 2.2 Ø1 Ø 3.5 Ø 3.7

Ø 3.75 8 mm 1018 Ø 3.75 Ø 2.6 Ø 1.6 Ø 3.5 Ø 3.75 A

P
10 mm 1010 Ø 3.75 Ø 2.6 Ø 1.6 Ø 3.5 Ø 3.75

11.5 mm 1011 Ø 3.75 Ø 2.6 Ø 1.6 Ø 3.5 Ø 3.75

13 mm 1013 Ø 3.75 Ø 2.6 Ø 1.6 Ø 3.5 Ø 3.75

16 mm 1016 Ø 3.75 Ø 2.6 Ø 1.6 Ø 3.5 Ø 3.75

Ø 4.2 6 mm 1056 Ø 4.2 Ø 2.7 Ø 2.7 Ø 3.5 Ø 4.2

8 mm 1028 Ø 4.2 Ø 2.8 Ø 1.8 Ø 3.5 Ø 4.2

10 mm 1020 Ø 4.2 Ø 2.8 Ø 1.8 Ø 3.5 Ø4

11.5 mm 1021 Ø 4.2 Ø 2.8 Ø 1.8 Ø 3.5 Ø4

13 mm 1023 Ø 4.2 Ø 2.8 Ø 1.8 Ø 3.5 Ø4

16 mm 1026 Ø 4.2 Ø 2.8 Ø 1.8 Ø 3.5 Ø4

Ø 4.65 6 mm 1036 Ø 4.65 Ø 2.9 Ø 2.9 Ø 3.85 Ø 4.65

8 mm 1038 Ø 4.65 Ø3 Ø2 Ø 3.85 Ø 4.65

10 mm 1030 Ø 4.65 Ø3 Ø2 Ø 3.85 Ø 4.45

11.5 mm 1031 Ø 4.65 Ø3 Ø2 Ø 3.85 Ø 4.45

13 mm 1033 Ø 4.65 Ø3 Ø2 Ø 3.85 Ø 4.45

C
B
Ø 5.3 6 mm 1046 Ø 5.3 Ø 3.8 Ø 3.8 Ø 3.85 Ø 5.3

8 mm 1048 Ø 5.3 Ø 3.45 Ø 2.45 Ø 3.85 Ø 5.3

10 mm 1040 Ø 5.3 Ø 3.45 Ø 2.45 Ø 3.85 Ø 5.1

11.5 mm 1041 Ø 5.3 Ø 3.45 Ø 2.45 Ø 3.85 Ø 5.1

13 mm 1043 Ø 5.3 Ø 3.45 Ø 2.45 Ø 3.85 Ø 5.1

Important: Professional considerations may be required for adaptations of the drill protocol in specific cases.

* ICE implants with 4.2, 4.65 and 5.3 in lengths 10 mm and longer.

34
 Internal Hex Connection
Implant-Abutment Connection
Design Features:
• Internal Hex connection
• One platform for all diameters
• Platform switching

Clinical Benefits:
• Tight implant-abutment fit*
• Simple restoration process

Coronal Part
Design Features:
• Micro-threads
• Back tapered**
• Rough surface

Clinical Benefits:
• Reduced Marginal Bone Loss
• Decreased crestal stress
• Increased BIC (Bone Implant Contact)

Implant Body and Core

Design Features:
• Moderately tapered body
• Slightly tapered apical area
• Osteotome- like shape

Clinical Benefits:
• Smooth & controlled insertion
3
• Good primary stability

2
Apical Part
Design Features: 1
• Sharp and deep threads
• Cutting flute
13
60° 2 2
Clinical Benefits: 3 1

• Smooth and controlled insertion

• Good primary stability

* Do not use I.C.E. implants with wide analog Ref. No. 5280 (IA5)
** ICE implants with Ø4.2, Ø4.65 and Ø5.3 in lengths 10 mm and longer.

35
 ICE Implant for Classical Esthetics

Step Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.0 / Ø 2.4 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 3.2/ Ø 3.65
Cortical*
Ø 3.7N

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 3.2/ Ø 3.65
Cortical*
Ø 3.75

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 3.2 / Ø 3.65 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 3. 2 / Ø 3.65 Ø 3.65 / Ø 4.1
Ø 4.2 Cortical*

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 Ø 3.2 Ø 2.0 Ø 2.4 Ø 3.2 Ø 3.65 Ø 2.0 Ø 2.4 Ø 3.2 Ø 3.65 Ø 4.1
/ Ø 2.8 / Ø 3.65 / Ø 2.8 / Ø 3.65 / Ø 4.1 / Ø 2.8 / Ø 3.65 / Ø 4.1 / Ø 4.5
Ø 4.65 Cortical*

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 Ø 3.2 Ø 3.65 Ø 2.0 Ø 2.4 Ø 3.2 Ø 3.65 Ø 4.5 Ø 2.0 Ø 2.4 Ø 3.2 Ø 3.65 Ø 4.5 Ø 4.8
/ Ø 2.8 / Ø 3.65 / Ø 4.1 / Ø 2.8 / Ø 3.65 / Ø 4.1 / Ø 4.8 / Ø 2.8 / Ø 3.65 / Ø 4.1 / Ø 4.8 / Ø 5.2
Ø 5.3 Cortical*

* Cortical – Drill through cortical plate with the larger diameter.

Important: Professional considerations may be required for adaptations of the drill protocol in specific cases.

36
 ICE

Internal Hex Connection

Implant for Classical Esthetics

Straight Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4** Ø 2.0 Ø 2.8 Ø 3.2** Ø 2.0 Ø 2.8 Ø 3.2** Ø 3.65
Cortical*
Ø 3.7N

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 Ø 2.8** Ø 2.0 Ø 2.8 Ø 3.2** Ø 2.0 Ø 2.8 Ø 3.2** Ø 3.65
Cortical*
Ø 3.75

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65** Ø 4.1
Ø 4.2 Cortical*

Bone Type IV Bone Type II & III

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1**
Ø 4.65

Hard Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1** Ø 4.5
Cortical*

Bone Type IV Bone Type II & III

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5 Ø 4.8**
Ø 5.3

Hard Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5 Ø 4.8** Ø 5.2
Cortical*

* Cortical – Drill through cortical plate

** 3mm shorter than implant's length. Note that drill can be replaced by a corresponding step drill throughout entire implant's length.
For more information, see step protocol.

37
 Spiral The original spiral implant

Recommended
bone type

• Osteotome-like condensing body

DESIGN FEATURES • Pronounced tapered core
• Apical part with sharp deep threads

• High primary stability

• Easy & smooth insertion
Clinical Benefits • Redirection capabilities
• Reduced marginal bone loss
• Increased BIC

Highly
recommended Optional

D
Dimensions
Ø Diameter Length Ref. No.
A B C D
Ø 3.3 8 mm 1308 Ø 3.7 Ø 2.55 Ø 1.55 Ø 3.5

10 mm 1300 Ø 3.7 Ø 2.55 Ø 1.55 Ø 3.5

11.5 mm 1301 Ø 3.7 Ø 2.55 Ø 1.55 Ø 3.5

13 mm 1303 Ø 3.7 Ø 2.55 Ø 1.55 Ø 3.5

16 mm 1306 Ø 3.7 Ø 2.55 Ø 1.55 Ø 3.5

Ø 3.75 8 mm 1358 Ø 3.85 Ø 2.9 Ø2 Ø 3.5
A
10 mm 1350 Ø 3.85 Ø 2.9 Ø2 Ø 3.5

11.5 mm 1351 Ø 3.85 Ø 2.9 Ø2 Ø 3.5

13 mm 1353 Ø 3.85 Ø 2.9 Ø2 Ø 3.5

16 mm 1356 Ø 3.85 Ø 2.9 Ø2 Ø 3.5

Ø 4.2 8 mm 1338 Ø 4.2 Ø3 Ø 2.1 Ø 3.85

10 mm 1330 Ø 4.2 Ø3 Ø 2.1 Ø 3.85

11.5 mm 1331 Ø 4.2 Ø3 Ø 2.1 Ø 3.85

13 mm 1333 Ø 4.2 Ø3 Ø 2.1 Ø 3.85

16 mm 1336 Ø 4.2 Ø3 Ø 2.1 Ø 3.85

Ø5 8 mm 1348 Ø 4.95 Ø 3.3 Ø 2.6 Ø 3.85

10 mm 1340 Ø 4.95 Ø 3.3 Ø 2.6 Ø 3.85

11.5 mm 1341 Ø 4.95 Ø 3.3 Ø 2.6 Ø 3.85

13 mm 1343 Ø 4.95 Ø 3.3 Ø 2.6 Ø 3.85

16 mm 1346 Ø 4.95 Ø 3.3 Ø 2.6 Ø 3.85

Ø6 8 mm 1368 Ø 5.95 Ø 4.6 Ø 3.35 Ø 3.85

10 mm 1360 Ø 5.95 Ø 4.6 Ø 3.45 Ø 3.85 C

11.5 mm 1361 Ø 5.95 Ø 4.6 Ø 3.45 Ø 3.85 B

13 mm 1363 Ø 5.95 Ø 4.6 Ø 3.45 Ø 3.85

38
 Internal Hex Connection
Implant-Abutment Connection
Design Features:
• Internal Hex connection
• One platform for all diameters
• Platform switching
Clinical Benefits:
• Tight implant-abutment fit
• Simple restoration process

Coronal Part
Design Features:
• Micro rings
Clinical Benefits:
• Reduced Marginal Bone Loss
• Decreased crestal stress
• Increased BIC

Implant Body and Core

Design Features:
• Slightly tapered body
• Tapered core
• Osteotome like condensing body
Clinical Benefits:
• Easy insertion
• High primary stability

Implant Threads
Design Features:
• Variable threads
• Double thread design
• 2.4mm step
Clinical Benefits:
• Easy and smooth insertion
• High primary stability
• Redirecting capability
• Increased BIC

Apical Part
Design Features:
• Sharp and deep threads
• Narrow core
Clinical Benefits:
• Easy and smooth insertion
• High primary Stability

Note: The illustration shows Spiral implant Ø3.75 / 13 mm

39
 Spiral The original spiral implant

Straight Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.0 Ø 2.8 Ø 2.0 Ø 2.8 Ø 3.2
Ø 3.3 Cortical*

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.8 Ø 2.0 Ø 2.8 Ø 3.2 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65
Ø 3.75 Cortical*

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1
Ø 4.2 Cortical*

Bone Type IV Bone Type II & III

Ø 5.0 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5

Hard Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5 Ø 4.8
Cortical*

Bone Type IV Bone Type II & III

Ø 6.0
Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.8 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.8 Ø 5.2

Hard Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.8 Ø 5.2 Ø 5.8
Cortical*

* Cortical – Drill through cortical plate with the larger diameter.

Important: Professional considerations may be required for adaptations of the drill protocol in specific cases.

40
Spiral The original spiral implant

Internal Hex Connection

41
 dfi dual fit implant

Recommended bone type

• Slightly tapered • Easily controlled during placement

DESIGN FEATURES • Double thread design Clinical • Long-term stability
Benefits • Large surface area
with variable threads

Highly
recommended Optional

Dimensions D
Ø Diameter Length Ref. No.
A B C D
Ø 3.3 8 mm 1288 Ø 3.7 Ø 2.6 Ø 2.1 Ø 3.5

10 mm 1280 Ø 3.7 Ø 2.6 Ø 2.1 Ø 3.5

11.5 mm 1281 Ø 3.7 Ø 2.6 Ø 2.1 Ø 3.5

A
13 mm 1283 Ø 3.7 Ø 2.6 Ø 2.1 Ø 3.5

Ø 3.75 8 mm 1268 Ø 3.85 Ø3 Ø 2.1 Ø 3.5

10 mm 1260 Ø 3.85 Ø3 Ø 2.1 Ø 3.5

11.5 mm 1261 Ø 3.85 Ø3 Ø 2.1 Ø 3.5

13 mm 1263 Ø 3.85 Ø3 Ø 2.1 Ø 3.5

Ø 4.2 8 mm 1278 Ø 4.2 Ø3 Ø 2.2 Ø 3.85

10 mm 1270 Ø 4.2 Ø3 Ø 2.2 Ø 3.85

11.5 mm 1271 Ø 4.2 Ø3 Ø 2.2 Ø 3.85

13 mm 1273 Ø 4.2 Ø3 Ø 2.2 Ø 3.85

Ø5 8 mm 1298 Ø 4.95 Ø 4.05 Ø 3.1 Ø 3.85

C
10 mm 1290 Ø 4.95 Ø 4.05 Ø 3.1 Ø 3.85 B

11.5 mm 1291 Ø 4.95 Ø 4.05 Ø 3.1 Ø 3.85

13 mm 1293 Ø 4.95 Ø 4.05 Ø 3.1 Ø 3.85

Straight Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I
Ø 2.0 Ø 2.8 Cortical* Ø 2.0 Ø 2.8 Ø 2.0 Ø 2.8 Ø 3.2 Cortical*
Ø 3.3

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Cortical* Ø 2.0 Ø 2.8 Ø 3.2 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Cortical*
Ø 3.75

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1
Ø 4.2 Cortical* Cortical*

Bone Type IV Bone Type II & III

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5 Cortical* Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5
Ø 5.0

Hard Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5 Ø 4.8 Cortical*

42
* Cortical – Drill through cortical plate
 Internal Hex Connection
Implant-Abutment Connection
Design Features:
• Internal Hex connection
• One platform for all diameters
• Platform switching

Clinical Benefits:
• Tight implant-abutment fit
• Simple restoration process

Coronal Part
Design Features:
• Micro rings

Clinical Benefits:
• Reduced Marginal Bone Loss
• Decreased crestal stress

Implant Body and Core

Design Features:
• Cylindrical body
• Slightly tapered apical area
• Double thread design with variable threads
• Large surface area

Clinical Benefits:
• Smooth & controlled insertion
• Good primary stability
• Reduced Marginal Bone Loss

Apical Part
Design Features:
• Sharp threads
• Slightly tapered

Clinical Benefits:
• Smooth and controlled insertion
• Good primary Stability

Note: The illustration shows DFI implant Ø3.3 / 13 mm

Important: Professional considerations may be required for adaptations of the drill protocol in specific cases.

43
 HEALING ABUTMENTS

Wide range of narrow, standard and wide Laser Marked Diameter Ø

Height
healing abutments.
Diameter Height
• Used for Internal Hex implants.
• Polished titanium surface for tissue acceptance.
• Laser marking to ensure easy identification of height and diameter.

Implant Platform

Manual Tightening

HHS1.25 HHSS1.25

4052 4053

Titanium Healing Abutments

Ø 3.85 mm
Height

Plate-forme shifting

D: Ø 3.85 mm D: Ø 3.85 mm D: Ø 3.85 mm

Dimensions
H : 3 mm H : 4 mm H : 5 mm

Code HSS3 HSS4 HSS5

Ref. No. 112 114 113

Instructions Use 1.25 mm driver for insertion (Ref. No. 4052 or 4053)

44
 HEALING ABUTMENTS

Internal Hex Connection

Titanium Healing Abutments

Ø 4.6 mm
Height

Plate-forme shifting

D: Ø 4.6 mm D: Ø 4.6 mm D: Ø 4.6 mm D: Ø 4.6 mm D: Ø 4.6 mm D: Ø 4.6 mm

Dimensions
H : 2 mm H : 3 mm H : 4 mm H : 5 mm H : 6 mm H : 7 mm

Code HS2 HS3 HS4 HS5 HS6 HS7

Ref. No. 116 109 117 110 118 119

Wide Titanium Healing Abutments

Ø

Ø 5 mm Ø 5.5 mm
Height

Plate-forme shifting

D: Ø 5 mm D: Ø 5 mm D: Ø 5.5 mm D: Ø 5.5 mm
Dimensions
H : 3 mm H : 5 mm H : 3 mm H : 5 mm

Code HS5-3 HS5-5 HS5.5-3 HS5.5-5

Ref. No. 124 125 126 127

Wide Titanium Healing Abutments

Ø

Ø 6 mm Ø 7 mm
Height

Plate-forme shifting

D: Ø6 mm D: Ø 6 mm D: Ø 7 mm
Dimensions
H : 3 mm H : 5 mm H : 3 mm

Code HS6-3 HS6-5 HS7-3

Ref. No. 128 129 130

45
implant Impression

Closed Tray Transfer

each transfer is supplied with its corresponding screw.

Standard short Slim

4.5 mm 3.8 mm

4.5 mm

12mm 12mm

7.5 mm

Material Stainless steel Stainless steel

Code HLT HLTS HLTLS

Ref. No. 5060 5170 5062

Instructions Use 1.25 mm driver for insertion (Ref. No. 4052 or 4053). Manual tightening.

Closed Tray Impression

1 2 3

4 5 6

46
implant Impression

Internal Hex Connection

open Tray Transfer
each transfer is supplied with its corresponding screw.

Standard Short

Ø3.5 mm

7 mm

Ø5.5 mm
3 mm

12 mm Ø5.5 mm

8 mm
Ø4.2 mm
Ø4.2 mm

Ø3.85 mm Ø3.85 mm

Material Stainless steel

Code HLTO HLTOS

Ref. No. 5061 5171

Instructions Use 1.25 mm driver for insertion (Ref. No. 4052 or 4053). Manual tightening.

Open Tray Impression

1 2 3

4 5 6

Impression
Before taking
the impression, attach
the transfer to the
implant with the
flat surface facing
the buccal area.

47
Cement- Retained Restorations

Titanium Abutments

A 30
Straight Abutments Slim Abutments NCM
C
B

Implant Platform

A: Ø4.5 mm A: Ø4.5 mm A: Ø3.85 mm A: Ø3.85 mm

Dimensions B: 1.7 mm B: 1.7 mm B: 0.8 mm B: 0.5 mm
C: 8.5 mm C: 12.5 mm C: 8.5 mm C: 8.5 mm

Code TLA TLAL TLAS TLASSP

Ref. No. 5030 5140 5150 5403

Instructions Use 1.25 mm driver for insertion (see page 27).

Straight Abutments with Various Cuff Heights

Plastic 30
Transfer NCM
C

7.1 mm
B

10 mm
6 mm

Implant Platform Ø5.5 mm

A: Ø4.8 mm A: Ø4.8 mm A: Ø4.8 mm A: Ø4.8 mm

Dimensions B: 1 mm B: 2 mm B: 3 mm B: 4 mm
C: 8.9 mm C: 9.9 mm C: 10.9 mm C: 11.9 mm

Code TLASP1 TLASP2 TLASP3 TLASP4 HTLASP

Ref. No. 5366 5367 5368 5369 5364

Suitable or TLASP and

Instructions Use 1.25 mm driver for insertion (see page 27)
ETLASP abutments

Measure the height of the soft tissue and choose the appropriate
abutment 7.1 mm

• Position the abutment in the implant, if possible with the flat surface 10 mm
6 mm
facing the buccal area.
• Screw the abutment manually into the implant Ø5.5 mm

• Position the plastic transfer on the abutment • A "click" indicates that the transfer is correctly positioned
• Press down on the plastic transfer cap • Take the impression
• Send the impression to the lab with the analog

48
 Cement- Retained Restorations

Internal Hex Connection

Wide Titanium Abutments
A

Wide Profile Abutments Wide Profile Abutments

30
NCM
C

C
B

B
Implant Platform Implant Platform

A: Ø5.6 mm A: Ø5.6 mm
A: Ø4.5 mm
Dimensions B: 2 mm B: 4 mm Dimensions C: 8.5 mm
C: 9.5 mm C: 11.5 mm

Code TLAO2 TLAO4 Code TLAW

Ref. No. 5182 5362 Ref. No. 5340

For wide emergence profile restorations and more For wide emergence profile
Instructions Instructions restorations & more flexibility of
flexibility of abutment fabrication/customization
abutment fabrication/customization

Angled Titanium Abutments

30
Angled Abutments 15° NCM
C
A

Implant Platform
D

A: 1.7 mm A: 1.65 mm A: 2.3 mm A: 1.5 mm

B: 0.5 mm B: 0.15 mm B: 1 mm B: 2.4 mm
Dimensions C: 8.5 mm C: 11.5 mm C: 8.5 mm C: 9 mm
D: 4.5 mm D: 4.5 mm D: 4.7 mm D: 4.8 mm

Code TLA 15 TLAL 15 TLA 15B TLA 15BB

Ref. No. 5090 5092 5091 5098

Instructions For creation of favorable line of insertion

Angled Abutments 25° Angled Abutments 35°

C
A

Implant Platform
D

A: 1.8 mm A: 2.4 mm A: 1.45 mm

B: 0.4 mm B: 0.4 mm B: 1 mm
Dimensions C: 8.5 mm C: 11.5 mm C: 10 mm
D: 4.7 mm D: 4.4 mm D: 4.65 mm

Code TLA 25 TLAL 25 TLA 35

Ref. No. 5130 5134 5136

Instructions For creation of favorable line of insertion Use screw Ref. No. 5127

49
Temporary PEEK Abutment

• Vital for 180 days

• PEEK polymer allows easy and quick chair-side modification 15
• Biocompatible NCM
• Provides adequate strength to the provisional restoration
• High resistance to repetitive mastication forces
• Suitable able for cement-retained or screw-retained temporary restoration

TEMPORARY PEEK STRAIGHT ABUTMENTS

Dimensions L: 9 mm, H: 1mm L: 9 mm, H: 2mm L: 9 mm, H: 3mm

Code TPA1 TPA2 TPA3

Ref. No. 5416 5417 5418

TEMPORARY PEEK ANGLED ABUTMENTS

15° 25°

Dimensions L: 8 mm, H: 1mm L: 8 mm, H: 2mm L: 8 mm, H: 3mm L: 8 mm, H: 1mm L: 8 mm, H: 2mm

Code TPA15-1 TPA15-2 TPA15-3 TPA25-1 TPA25-2

Ref. No. 5419 5420 5421 5422 5423

50
Temporary Titanium Abutments

Internal Hex Connection

Temporary Titanium Abutments
A

Temporary Abutments
C
B

Implant Platform

A: Ø4.5 mm A: Ø4.5 mm
Dimensions B: 1.7 mm B: 1.7 mm
C: 9.5 mm C: 7.8 mm

Code TLAC-AR TLAC-R Non-Engaging

Ref. No. 5200 5220

Instructions Used for multiple unit restorations

51
 Esthetic Titanium Abutments

30
NCM
A
Plastic
Straight Abutments with Various Cuff Heights
Transfer
C

7.1 mm
B

10 mm
6 mm

Ø5.5 mm
Implant Platform

A: Ø4.5 mm A: Ø3.9 mm A: Ø4.5 mm A: Ø4.5 mm

Dimensions B: 1 mm B: 2 mm B: 3 mm B: 4 mm
C: 7.5 mm C: 9.9 mm C: 10.5 mm C: 11.5 mm

Code ETLASP1 ETLASP2 ETLASP3 ETLASP4 HTLASP

Ref. No. 5352 5353 5354 5355 5364

Suitable or TLASP
Instructions Use 1.25 mm driver for insertion (see page 27)
& ETLASP abutments

Straight Abutments Angled Abutments

C
C

15° 25°
A
B

D
Implant Platform Implant Platform

A: Ø3.85 mm A: Ø1.65 mm
A: Ø4.5 mm A: Ø1.8mm | B: 0.4 mm
Dimensions 0.8 mm / 8.5 mm B: 0.15 mm | C: 11.5 mm | D: 4.5 mm
1.7 mm / 8.5 mm C: 8.5 mm | D: 4.7 mm

Code ETLA ETLAS ETLAL 15 ETLAL 25

Ref. No. 5031 5155 5094 5131

Angled Abutments 15° Angled Abutments 25°

C
B
A

Implant Platform
D

A: 1.6 mm A: 2.6 mm A: 3.6 mm A:1.6 mm A: 2.5 mm A: 3.7 mm

B: 2.5 mm B: 3.5 mm B: 4.5 mm B: 2.3 mm B: 3.3 mm B: 4.5 mm
Dimensions C: 8.7 mm C: 9.7 mm C: 10.6 mm C: 9 mm C: 9.9 mm C: 10.9 mm
D: 5.1 mm D: 5.1 mm D: 5.1 mm D: 5.3 mm D: 5.3 mm D: 5.3 mm

Code EAAS 15 EAA 15 EAAH 15 EAAS 25 EAA 25 EAAH 25

Ref. No. 5410 5411 5412 5413 5414 5415

Instructions Designed especially for pre-molars and molars Designed especially for pre-molars and molars

52
CASTING ABUTMENTS

Internal Hex Connection

CoCr Base Abutments Plastic Abutment for Casting
30
NCM

• Cobalt-Chrome Base
• Plastic casting sleeve from
8.5 mm 8.5 mm
Polyethylene Delrin

1.7 mm 1.7 mm 1.7 mm

1.7 mm

Ø4.5 mm Ø4.5 mm

Code TLABCC TLABCC-R Code PLA PLA-R

Ref. No. 6405 6406 Ref. No. 5040 5041

Melting Range: 1200°C - 1330°C

Instructions
Recommended sintering below 900°C

Implant Analogs
Implant analog (IA) is suitable for all implant diameters (Ø3.3, Ø3.75, Ø3.75, Ø4.2, Ø5.0, Ø6.0 mm).
When using Ø5.0 mm or Ø6.0 mm implants, it is recommended to use lab analogs of identical dimensions, i.e. IA5 and IA6.

Standard Wide MULTI-UNIT PRINTED MODEL

Ø4.2 mm Ø5 mm

4.5 mm
5.4 mm

12.5 mm
12.5 mm

Ø3.3 mm Ø3.8 mm

Code IA IA5 BTT-N AN-PM

Ref. No. 5080 5280 5211 4995

* IA5 is not compatible with ICE implants.

Instructions For Multi-Unit restorations For resin printed models
Use 1.25 mm driver for insertion (Ref. No. 4052 or 4053).

screws

Prosthetic Screws
30 Retrieval Screw
NCM

Code STLAS STLAT* STLASH** RS

Ref. No. 5122 5121 5127 5110

* Specially coated, for laboratory use only.

Instructions Fits IH and CS platforms.
** To be used only with the TLA36 abutment. Ref. 5136 (Page 49)

53
 SCREW-RETAINED RESTORATIONS

MULTI-UNIT ABUTMENTS
angled Abutments Implants Closed
straight Abutments Open Tray Transfer
Tray

A: Ø4.7 mm
5432 A: Ø 4.7 5221 B: 0.75 mm
AU 17-1.5 IH B: 1.5 mm TCT0.5-N C: 1 mm

5231
5433 A: Ø4.7 mm 5231 5248 5235
A: Ø 4.7 5222 B: 1.6 mm
AU 17-2.5 IH B: 2.5 mm TST-N TCT-N-R TS-N
TCT1.5-N C: 2.8 mm
ANALOG

5434 A: Ø4.7 mm
A: Ø 4.7 5223 B: 2.6 mm
AU 17-3.5 IH B: 3.5 mm TCT2.5-N C: 3.8 mm
5211
BTT-N

5437 A: Ø 4.7 5252 A: Ø4.7 mm

B: 3.6 mm
AU 30-1.5 IH B: 1.5 mm TCT3.5-N C: 4.8 mm Fixation Screw

5438 A: Ø 4.7 5253 A: Ø4.7 mm

6092
B: 4.6 mm 6093
AU 30-2.5 IH B: 2.5 mm TCT4.5-N SF-N SFT-N
C: 5.8 mm

5439 A: Ø 4.7 A: Ø4.7 mm Temporary Abutment

5254
B: 3.5 mm B: 5.6 mm
AU 30-3.5 IH TCT5.5-N C: 6.8 mm

5216
TTA-N

Includes screw 6092.

A
Pro Healing Abutments
A
C

5236
B

HCT4-N
B

5237
4057 HCT6-N
4055 1.5 mm
1.25 mm Integrated screw

Burnout Sleeve
1.25 mm Driver 1.5 mm Driver

5217 5218
PST-N-AR PST-N

includes screw 6093.

4052 4053 4061 4055 4056 4165 4059 4060 4057 4058 4168
HHS HHSS HTD HTD HTD HTD HHS 1.5 HHL 1.5 HTD 1.5 HTD 1.5S HT 1.5
1.25 1.25 1.25 L 1.25 1.25 S 1.25 M

torque

Straight Multi-Unit abutment 30 Ncm

4572
Torque Ratchet Impression transfer and healing abutment Manual Tightening

Temporary fixture 25 Ncm

Angled Multi-Unit abutment 30 Ncm

54
SCREW-RETAINED RESTORATIONs

Internal Hex Connection

MULTI-UNIT ABUTMENTS 30
NCM
A
C

MULTI-UNIT STRAIGHT ABUTMENTS

B

Implant Platform

A: Ø4.7 mm A: Ø4.7 mm A: Ø4.7 mm A: Ø4.7 mm A: Ø4.7 mm A: Ø4.7 mm

Dimensions B: 0.75 mm B: 1.6 mm B: 2.6 mm B: 3.6 mm B: 4.6 mm B: 5.6 mm
C: 1 mm C: 2.8 mm C: 3.8 mm C: 4.8 mm C: 5.8 mm C: 6.8 mm

Code TCT0.5-N TCT1.5-N TCT2.5-N TCT3.5-N TCT4.5-N TCT5.5-N

Ref. No. 5221 5222 5223 5252 5253 5254

A
MULTI-UNIT ANGLED ABUTMENTS
B

Angle 17° 30°

A: Ø 4.7 A: Ø 4.7 A: Ø 4.7 A: Ø 4.7 A: Ø 4.7 A: Ø 4.7

Dimensions
B: 1.5 mm B: 2.5 mm B: 3.5 mm B: 1.5 mm B: 2.5 mm B: 3.5 mm

Code AU 17-1.5 IH AU 17-2.5 IH AU 17-3.5 IH AU 30-1.5 IH AU 30-2.5 IH AU 30-3.5 IH

Ref. No. 5432 5433 5434 5437 5438 5439

HBC ABUTMENTS
A

STRAIGHT ABUTMENTS - FOR SINGLE IMPLANT RESTORATION

C
B

Implant Platform

A: Ø4.7 mm A: Ø4.7 mm A: Ø4.7 mm

Dimensions B: 0.5mm B: 1.5mm B: 2.5mm
C: 2.6mm C: 3.6mm C: 4.6mm
Note: package includes HBC
Code HBC 0.5 HBC 1.5 HBC 2.5
abutment screw and burn-
out sleeve.
Ref. No. 6040 6041 6042

55
CAD/CAM RESTORATION PARTS

DUAL USE SCAN BODIES FOR MULTI-UNITS

10 ADHESIVE COPINGS FOR MULTI-UNITS
NCM

Engaged Non-engaged

Height 7 mm 7 mm 3.5 mm 3.5 mm

Code IOSB-TCT-N-R IOSB-TCT-N TAC-TCT-N TAC-TCT-N-R

Ref. No. 3883* 5003* 5028 5029

For bridge/bar restorations For single crown restorations

For single For bar/bridge
Instructions with multi-unit straight and with multi-unit angled
tooth restorations restorations
angled abutments abutments

* Screw included.

Screws

Code SF-N SFT-N S-DM-SR

Ref. No. 6092 6093 4994

Fixation screw Direct mounting

Instructions for Multi-Unit restoration
Black coated screw for Lab
on metal frame*

* Should not be used for full zirconia or ceramic restorations.

PRE-MILLED BLANKS
30 Analog
NCM
A
A D
B

B
C

Implant
platform
Implant platform

A: Ø15.8 mm
A: Ø11.5 mm B: 20.25 mm
Dimensions Dimensions
B: 20.2 mm C: 15.25 mm
D: Ø11.5 mm

Code BA-PF-IH Code WBA-PF-IH AN-PM

Ref. No. 4988 Ref. No. 4989 4995

Instructions For Preface® abutment holder. Screw included For resin printed models

56
 CAD/CAM RESTORATION PARTS

Internal Hex Connection

DUAL USE SCAN BODY

Manual
Height 10 mm Tightening
code SB-IH

REF. NO. 5019

30
Use 1.25 mm driver for insertion (see page 27) NCM

Ti-Bases WIDE TI-BASES

A
Engaged Non-engaged Engaged Non-engaged
C

Implant
platform

Gingival 0.7 mm 2.5 mm 0.7 mm 2.5 mm 0.7 mm 0.7 mm

Height

A: Ø4.5 mm A: Ø4.5 mm A:Ø4.5 mm A: Ø4.5 mm A:Ø6 mm A:Ø6 mm

B: 5 mm B:4 mm B: 5 mm B:4 mm B: 3.5 mm B: 3.5 mm
Dimensions
C: 5.7 mm C: 6.5 mm C: 5.7 mm C: 6.5 mm C: 4.2 mm C: 4.2 mm
D: 0.6 mm D: 0.6 mm D: 0.7 mm D: 0.7 mm D: 1.2 mm D: 1.43 mm

Code CCTB CCTB-2.5 CCTB-R CCTB-R-2.5 WCCTB WCCTB-R

Ref. No. 5024 4951 5025 4952 5007 5008

Screw included.

Sirona Compatible

ti-base SCAN POST

Code CCTB-IH-SI CCSP-IH-SI

Ref. No. 4980 4984

Instructions For scanning and/or restoration use For scanning only

Screw included.

57
OVERDENTURE RESTORATIONs

30
NCM
ALPHALOC ABUTMENT SYSTEM

alphaloc

Ø2.5 mm

5 mm
3 mm 4 mm
1 mm 2 mm
0.5 mm

Height 0.5 mm 1 mm 2 mm 3 mm 4 mm 5 mm

4867 4868 4869 4870 4871 4872

Dimensions A: Ø 2.5 mm A: Ø 2.5 mm A: Ø 2.5 mm A: Ø 2.5 mm A: Ø 2.5 mm A: Ø 2.5 mm

B: 0.5 mm B: 1 mm B: 2 mm B: 3mm B: 4 mm B: 5 mm
C: 2.16 mm C: 2.66 mm C: 3.66 mm C: 4.66 mm C: 5.66 mm C: 6.66 mm

Kit includes: 1 AlphaLoc abutment of the given height, 1 stainless steel metal housing, 4 retentive caps, 1 block-out spacer, 1 laboratory cap

AlphaLoc Processing Package AlphaLoc Retentive Caps

Ref. No. 4875 4876 4877 4878 4879

Stainless steel metal housing, Violet Clear Pink Yellow

block-out spacer, nylon retentive caps (strong retention) (standard retention) (soft retention) (extra soft retention)
Includes
(violet, clear, pink and yellow),
laboratory cap (black) 4 units per package

ALPHALOC ACCESSORIES

Laboratory Cap Block Out Impression male Insertion Extraction

(black) Spacer Coping Analog Tool * Tool *

Content 4 Units 1 Unit 4 Units 4 Units 1 Unit 1 Unit

Ref. No. 4882 4883 4884 4885 4886* 4887*

* In some markets, the insertion and extraction tool is provided as a single, dual sided instrument.

58
Titanium Ball Attachments

Internal Hex Connection

The ball attachments are used for tissue and implant-supported overdentures, typically with two or more parallel
30
implants (within 10°). Ball attachments provide firm retention and stabilization to the overdenture. NCM
Make sure a proper tissue support for the prosthesis is available.

Straight Ball Attachments

2.5 mm 4.1 mm

5 mm 6 mm
3 mm 4 mm
0.5 mm 2 mm

Code TB 0.5 TB 2 TB 3 TB 4 TB 5 TB 6

Ref. No. 6260 6210 6280 6220 6270 6290

For impression, use analog 5080 and IH transfers. Use 1.25 driver for insertion (see page 27).
Instructions
Use nylon cap ø 2.5 mm.

Angled Ball Attachments

3 mm
2 mm

Code TBAA2 TBAA3

Ref. No. 6304 6306

Instructions Ball is oriented to the flat surface of the hex

Nylon Cap for Ø 2.5 mm

Stainless steel Nylon Cap with Soft Nylon Cap

Nylon Cap
Housing Titanium Ring

Code H NC NCT NCA

Ref. No. 6240 6250 6251 6253

59
60
 Conical Narrow Connection
Conical Narrow
Connection (CHC)
The Conical Narrow Connection system includes 3.2 and 3.5 mm implant diameters with a conical
narrow connection for cases involving narrow ridges and limited-space between adjacent teeth.
It is compatible with Alpha-Bio Tec.'s CHC prosthetic line and CAD/CAM restoration parts.

Ø3. 2, Ø 3.5

connection Conical Narrow Conical Narrow

Connection Connection

Active implant designed for immediate implant

An Extended Solution for Narrow Ridges
procedures in narrow ridges and limited spaces.

Recommended
bone type

• Tapered • Moderately tapered

• Centering and anchoring features • Split coronal micro threads
Design
Features • Double, variable threads
• Micro-threads

• High primary stability • Improved stress distribution

Clinical • Reduced marginal bone loss • Supports wide range of clinical cases
Benefits • Increased surface area • Controlled bone penetration
• Increased BIC

Optimal NARROW Implant

Highly
recommended Optional

61
 MULTINEO SYSTEM multiple options

Multiple Options

recommended bone type

• Tapered • High primary stability

• Centering and anchoring features Clinical • Reduced marginal bone loss
DESIGN FEATURES Benefits
• Double, variable threads • Increased surface area
• Micro-threads • Increased BIC

Highly
recommended Optional

Dimensions
Ø Diameter Length Ref. No.
A B C D H
Ø 3.2
8 mm 1908 Ø 3.2 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

10 mm 1900 Ø 3.2 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

11.5 mm 1901 Ø 3.2 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

13 mm 1903 Ø 3.2 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

16 mm 1906 Ø 3.2 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

Ø 3.5
8 mm 1928 Ø 3.5 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

10 mm 1920 Ø 3.5 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

11.5 mm 1921 Ø 3.5 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

13 mm 1923 Ø 3.5 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

16 mm 1926 Ø 3.5 Ø 2.9 Ø 1.5 Ø 2.5 Ø 2.1

62
 Conical Narrow Connection
multiNEO system multiple options

Coronal Part
Design Features:
• Platform Switching
• Micro-threads
• Cutting flutes
• Conical narrow connection
Clinical Benefits:
• Reduced pressure on cortical area
• Efficient cutting ability
• Improved bone preservation
• High initial stability

Implant Threads
Design Features:
• Variable thread design
• Double thread with 2.4 mm step
• Micro-threads
Clinical Benefits:
• High cutting efficiency
• Osteotome like body
• Fast and controlled insertion
• Increased surface area
• Increased BIC

Implant Body and Core

Design Features:
• Straight coronal part
• Slightly tapered body
• Tapered core
• Tapered apical part
Clinical Benefits:
• Osteotome like body
• High primary stability

Apical Part
Design Features:
• Narrow apex
• Sharp and deep threads
• Patented centering feature
Clinical Benefits:
• High primary stability
• Easy navigation and penetration
• Efficient cutting capability

63
 MULTINEO SYSTEM multiple options

implant system

Implant Package Drivers

A modern and Color coded grip drivers
easy-to-use implant with gingival height
package with enhanced markings and lead pin
ergonomics. for centering and easy
insertion.

Step Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.0 Ø 2.4/ Ø 2.8 Ø 2.0 Ø 2.4/ Ø 2.8 Ø 2.8/ Ø 3.0
Ø 3.2

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.0/ Ø 2.4 Ø 2.0 Ø 2.4/ Ø 2.8 Ø 2.8/ Ø 3.0 Ø 2.0 Ø 2.4/ Ø 2.8 Ø 2.8/ Ø 3.2
Ø 3.5

Straight Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.0 Ø 2.4 Ø 2.8* Ø 2.0 Ø 2.8 Ø 3.0*
Ø 3.2

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4* Ø 2.0 Ø 2.8 Ø 3.0* Ø 2.0 Ø 2.8 Ø 3.2*
Ø 3.5

* 3mm shorter than implant's length.

Important: Professional considerations may be required for adaptations of the drill protocol in specific cases.

64
65
 NICE SYSTEM An Extended Solution for Narrow Ridges

RECOMMENDED
BONE TYPE

• Moderately tapered
DESIGN FEATURES
• Split coronal micro threads

• Improved stress distribution

Clinical Benefits • Supports wide range of clinical cases
• Controlled bone penetration

Highly
recommended Optional

Dimensions
Ø Diameter Length Ref. No.
A B C D H

Ø 3.2 8 mm 1068 Ø 3.2 Ø 2.2 Ø 1.1 Ø 2.5 Ø 2.1

10 mm 1060 Ø 3.2 Ø 2.0 Ø 1.1 Ø 2.5 Ø 2.1

11.5 mm 1061 Ø 3.2 Ø 2.0 Ø 1.1 Ø 2.5 Ø 2.1

13 mm 1063 Ø 3.2 Ø 2.0 Ø 1.1 Ø 2.5 Ø 2.1

16 mm 1066 Ø 3.2 Ø 2.0 Ø 1.1 Ø 2.5 Ø 2.1

Straight Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.0 Ø 2.8 Ø 2.0 Ø 2.8 Ø 3.0**
Ø 3.2 *

* In cases of thick cortical layer use 3.0 mm drill only through the cortex.
** 3 mm shorter than implant's length.

Important: Professional considerations may be required for adaptations of the drill protocol in specific cases.

66
 Conical Narrow Connection
Implant Abutment Connection
Design Features:
• Hex 2.1 mm
• Significant platform switching
• Tight implant abutment fit
Clinical Benefits:
• Low bacteria leakage
• Reduced micro movements
• Reduced marginal bone loss
• Esthetically pleasing results

Coronal Part
Design Features:
• Straight coronal part
• Split coronal micro-thread
Clinical Benefits:
• Increased surface area
• Increased BIC (Bone to Implant contact)
in the coronal part
• Reduced marginal bone loss (MBL)
• Immediate and long-term esthetic results.

Implant Body and Core

Design Features:
• Tapered core and body
• Osteotome like body
Clinical Benefits:
• Smooth insertion to the bone
• High primary stability
• Enables immediate implantation
and immediate loading

Implant Threads
Design Features:
• Double thread design 2.2 mm
• Variable thread design 3
• Trapezoid thread profile
2
Clinical Benefits:
• Narrow apical part 2.0mm
1
• Sharp and deep apical threads
• Tapered apex 2 3
• Flat apex 1

Apical part
Design Features:
• Narrow apical part 2.0mm
• Sharp and deep apical threads
• Tapered apex
• Flat apex
Advantages:
• Easy & controlled insertion
• High primary stability
• Suitable for immediate implantation
and immediate loading

67
HEALING ABUTMENTS
3.4
/5- C H C
Laser marking to ensure easy
identification of height and diameter.

Diameter Ø Ø 3.4 mm Manual tightening

Height mm

Implant Platform

D: Ø 3.4 mm D: Ø 3.4 mm D: Ø 3.4 mm D: Ø 3.4 mm

Dimensions
H: 2 mm H: 3 mm H: 5 mm H: 7 mm

Code HSD3.4-2-CHC HSD3.4-3-CHC HSD3.4-5-CHC HHS1.25 HHSS1.25

HSD3.4-7-CHC

Ref. No. 7311 7312 7313 40527314 4053

Diameter Ø Ø 3.8 mm
Height mm

Implant Platform

D: Ø 3.8 mm D: Ø 3.8 mm D: Ø 3.8 mm

Dimensions
H: 2 mm H: 3 mm H: 5 mm

Code HSD3.8-2-CHC HSD3.8-3-CHC HSD3.8-5-CHC

Ref. No. 7315 7316 7317

Diameter Ø Ø 4.2 mm
Height mm

Implant Platform

D: Ø 4.2 mm D: Ø 4.2 mm D: Ø 4.2 mm

Dimensions
H: 2 mm H: 3 mm H: 5 mm

Code HSD4.2-2-CHC HSD4.2-3-CHC HSD4.2-5-CHC

Ref. No. 7319 7320 7321

68
 Conical Narrow Connection
Impression Transfers & Analogs

Closed Tray Transfer open Tray Transfer

Ø 4.5 mm Ø 4.5 mm

3.2 mm
8.5 mm

Ø 3.7 mm 1.3 mm

12 mm
3.2 mm 9.2 mm

Code HLTS-CHC HLTO-CHC

Ref. No. 7333 7335

Instructions Supplied with the screw. Max. 10 Ncm. Manual tightening.

Implant Analogs

Ø 3.2 mm

12 mm

Code IA-CHC BTT-N AN-PM-CHC

Ref. No. 7338 5211 4996

For Multi-Unit For resin

Instructions
restorations printed model

69
CEMENT-RETAINED RESTORATIONS

Esthetic Straight Abutments

20
NCM
C
B

Implant Platform

A: Ø 3.6 mm A: Ø 3.6 mm A: Ø 3.6 mm A: Ø 3.6 mm

Dimensions B: 1.0 mm B: 2.0 mm B: 3.0 mm B: 4.0 mm
C: 8.9 mm C: 9.9 mm C: 10.9 mm C: 11.9 mm

Code ETLASP1-CHC ETLASP2-CHC ETLASP3-CHC ETLASP4-CHC

Ref. No. 7350 7351 7352 7353

Instructions Use 1.25 mm driver for insertion (see page 27). DO NOT exceed 20 Ncm.

Esthetic Straight Wide Abutments

20
NCM
C
B

Implant Platform

A: Ø 4.0 mm A: Ø 4.0 mm A: Ø 4.0 mm A: Ø 4.0 mm A: Ø 4.0 mm

Dimensions B: 1.0 mm B: 2.0 mm B: 3.0 mm B: 4.0 mm B: 5.0 mm
C: 11.0 mm C: 12.0 mm C: 13.0 mm C: 14.0 mm C: 15.0 mm

Code ETWASP1-CHC ETWASP2-CHC ETWASP3-CHC ETWASP4-CHC ETWASP5-CHC

Ref. No. 7370 7371 7372 7373 7374

Instructions Use 1.25 mm driver for insertion (see page 27).

20
A
NCM

Esthetic Standard Abutments Standard Abutment

C

Implant Platform

A: Ø 3.2 mm A: Ø 3.6 mm A: Ø 4.0 mm A: Ø 4.0 mm

Dimensions C: 9.0 mm C: 9.0 mm C: 11.0 mm C: 9.2 mm

Code ETLAS3.2-CHC ETLAS3.6-CHC ETLAS4.0-CHC TLAS4.O-CHC

Ref. No. 7356 7357 7383 7358

Instructions Use 1.25 mm driver for insertion (see page 27).

70
 Conical Narrow Connection
CEMENT-RETAINED RESTORATIONS

Esthetic Angled Titanium Abutments

20
NCM
C

15° 15° 25°

A
B

Implant
Platform

D
A: 1.1 mm A: 1.1 mm A: 1.1 mm
B: 1.5 mm B: 1.5 mm B: 1.4 mm
Dimensions C: 8.2 mm C: 10.2 mm C: 8.2 mm
D: Ø 3.9 mm D: Ø 3.9 mm D: Ø 4.3 mm

Code ETLA15-CHC ETLAL15-CHC ETLA25-CHC

Ref. No. 7360 7361 7362

Instructions Use 1.25 mm driver for insertion (see page 27).

Esthetic Anatomic 15° Angled Abutments

20
NCM
C

15° 15° 15°

A

Implant
Platform
D

A: 1.5 mm A: 2.5 mm A: 3.5 mm

B: 2.5 mm B: 3.5 mm B: 4.5 mm
Dimensions C: 9.5 mm C: 10.5 mm C: 11.5 mm
D: Ø 4.0 mm D: Ø 4.0 mm D: Ø 4.0 mm

Code EA15-1.5 CHC EA15-2.5 CHC EA15-3.5 CHC

Ref. No. 7363 7364 7365

Instructions Use 1.25 mm driver for insertion (see page 27).

Esthetic Anatomic 25° Angled Abutments

20
NCM
C

25° 25° 25°

B
A

Implant
Platform
D

A: 1.5 mm A: 2.5 mm A: 3.5 mm

B: 2.5 mm B: 3.5 mm B: 4.5 mm
Dimensions C: 9.5 mm C: 10.5 mm C: 11.5 mm
D: Ø 4.0 mm D: Ø 4.0 mm D: Ø 4.0 mm

Code EA25-1.5CHC EA25-2.5CHC EA25-3.5CHC

Ref. No. 7366 7367 7368

Instructions Use 1.25 mm driver for insertion (see page 27).

71
CASTING ABUTMENTS

Screws

Prosthetic Screw CHC RETRIEVAL SCREW CHC

Code STLA-CHC RS-CHC

Ref. No. 7345 7400

CoCr Base Abutments Screw

20
NCM
16.25 mm

16.3 mm
1.75 mm
2.25 mm

1. 8 mm
2.3 mm

CoCr base

Titanium base
Ø2.5 mm Ø2.5 mm

Diameter Ø 3.6

Code TLABCC-CHC TLABCC-R-CHC CCS-CHC

Ref. No. 3613 3614 3616

Instructions Melting Range: 1200°C - 1330°C. Recommended sintering below 900°C

Note: remove screw and titanium base before sintering

72
73
SCREW-RETAINED RESTORATIONS

Closed
Angled Abutments Implants Straight Abutments Open Tray Transfer
Tray

A: Ø 4.7 mm
A: Ø 4.7 5242 B: 0.75 mm
7482 C: 1.95 mm
B: 1.5 mm TCT- N 0.75 CHC
AU 17-1.5 CHC
5231

A: Ø 4.7 mm 5231 5248 5235

Ø 3.2
B: 1.5 mm TST-N TCT-N-R TS-N
7483 A: Ø 4.7 5243
B: 2.5 mm
Ø 3.5
TCT-N 1.5 CHC C: 2.7 mm
AU 17-2.5 CHC ANALOG

A: Ø 4.7 mm 5211
7484 A: Ø 4.7 5244 B: 2.5 mm BTT-N
B: 3.5 mm TCT-N 2.5 CHC C: 3.7 mm
AU 17-3.5 CHC

Fixation Screw
A: Ø 4.7 mm
7487 A: Ø 4.7 5245 B: 3.5 mm
B: 1.5 mm Ø 3.2 TCT-N 3.5 CHC C: 4.7 mm
AU 30-1.5 CHC 6092 6093
SF-N SFT-N

A: Ø 4.7 mm
7488 A: Ø 4.7 5246 B: 4.5 mm Temporary Abutment
AU 30-2.5 CHC B: 2.5 mm TCT-N 4.5 CHC C: 5.7 mm

5216
A: Ø 4.7 mm TTA-N
7489 A: Ø 4.7 5247 B: 5.5 mm
TCT-N 5.5 CHC C: 6.7 mm
AU 30-3.5 CHC B: 3.5 mm
Includes screw 6092.

Pro Healing Abutments

5236
A A HCT4-N
C

5237
HCT6-N
B
B

Integrated screw

4055 4057
1.25 mm Burnout Sleeve
1.5 mm

5217 5218
1.25 mm Driver 1.5 mm Driver PST-N-AR PST-N

includes screw 6093.

4052 4053 4061 4055 4056 4165 4059 4060 4057 4058 4168
HHS HHSS HTD HTD HTD HTD HHS 1.5 HHL 1.5 HTD 1.5 HTD 1.5S HT 1.5
1.25 1.25 1.25 L 1.25 1.25 S 1.25 M

torque

4572
Straight Multi- Unit Abutment CHC 20 Ncm
Torque Ratchet

Impression transfer and healing abutment Manual Tightening

Temporary fixture on MUA 15 Ncm

Angled Multi-Unit abutment 20 Ncm

74
 Conical Narrow Connection
SCREW-RETAINED RESTORATIONS

20
MULTI UNIT ABUTMENTS NCM

MULTI-UNIT STRAIGHT ABUTMENTS CHC

C
B

Implant Platform

A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm

Dimensions B: 0.75 mm B: 1.5 mm B: 2.5 mm B: 3.5 mm B: 4.5 mm B: 5.5 mm
C: 1.95 mm C: 2.7 mm C: 3.7 mm C: 4.7 mm C: 5.7 mm C: 6.7 mm

Code TCT- N 0.75 CHC TCT-N 1.5 CHC TCT-N 2.5 CHC TCT-N 3.5 CHC TCT-N 4.5 CHC TCT-N 5.5 CHC

Ref. No. 5242 5243 5244 5245 5246 5247

20
NCM

A
Multi-Unit Angled Abutments CHC
B

Angle 17° 30°

A: Ø 4.7 A: Ø 4.7 A: Ø 4.7 A: Ø 4.7 A: Ø 4.7 A: Ø 4.7

Dimensions
B: 1.5 mm B: 2.5 mm B: 3.5 mm B: 1.5 mm B: 2.5 mm B: 3.5 mm

Code AU 17-1.5 CHC AU 17-2.5 CHC AU 17-3.5 CHC AU 30-1.5 CHC AU 30-2.5 CHC AU 30-3.5 CHC

Ref. No. 7482 7483 7484 7487 7488 7489

75
CAD/CAM RESTORATION PARTS

DUAL USE SCAN BODIES FOR MULTI-UNITS 10 ADHESIVE COPINGS FOR MULTI-UNITS
NCM
Engaged Non-engaged

Height 7 mm 7 mm 3.5 mm 3.5 mm

Code IOSB-TCT-N-R IOSB-TCT-N TAC-TCT-N TAC-TCT-N-R

Ref. No. 3883 5003 5028 5029

For bridge/bar restorations For single crown restorations

with multi-unit straight and with multi-unit angled
For single For bar/bridge
Instructions angled abutments abutments.
tooth restorations restorations

Screw included

Screws Analog

Code SF-N SFT-N S-DM-SR AN-PM-CHC

Ref. No. 6092 6093 4994 4996

Direct mounting on metal

frame.
Fixation screw Black coated For resin
Instructions for Multi-Unit
screw for Lab Should not be used for printed models
restoration full zirconia or ceramic
restorations

76
 Conical Narrow Connection
CAD/CAM RESTORATION PARTS

DUAL USE SCAN BODY

Manual
PRE-MILLED BLANK
20
Height 10 mm Tightening NCM
code SB-CHC
A
REF. NO. 5021

B
Screw included. Use 1.25 mm
INSTRUCTION driver for insertion
(see page 27) Implant platform

A: Ø11.5 mm
Dimensions B: 20.2 mm

Code BA-PF-CHC

Ref. No. 4990

For Preface® abutment holder.

Screw included. Use 1.25 mm driver
for insertion (see page 27)

TI-BASEs
20
NCM
A Engaged Non-Engaged
C

Plate-forme
de l'implant

Height 0.7 mm 2.5 mm 0.7 mm 2.5 mm

Gingivale
A: Ø3.8 mm A: Ø3.8 mm A:Ø3.6 mm A: Ø3.8 mm
B: 5 mm B: 4 mm B: 5 mm B: 4 mm
Dimensions C: 5.7 mm C:6.5 mm C: 5.7 mm C: 6.5mm
D: 0.4 mm D: 0.42 mm D: 0.5 mm D: 0.5 mm

Code CCTB-CHC CCTB-CHC-2.5 CCTB-CHC-R CCTB-CHC-R-2.5

Ref. No. 5026 4953 5027 4954

Instructions Screw included. Use 1.25 mm driver for insertion (see page 27)

Sirona Compatible

ti-base SCAN POST

20
NCM

Code CCTB-CHC-SI CCSP-CHC-SI

Ref. No. 4982 4985

Instructions For scanning and/or restoration use For scanning only

Screw included. Use 1.25 mm driver for insertion (see page 27)

77
overdenture restorations

AlphaLoc Abutment System

C

20
A

AlphaLoc NCM
B

Implant platform

A: 2.5 mm A: 2.5 mm A: 2.5 mm A: 2.5 mm A: 2.5 mm A: 2.5 mm

Dimensions
B: 0.5 mm B: 1.0 mm B: 2.0 mm B: 3.0 mm B: 4.0 mm B: 5.0 mm
C: 2.5 mm C: 3.6 mm C: 3.6 mm C: 3.6 mm C: 3.6 mm C: 3.6 mm

7470 7471 7472 7473 7474 7475

Kit includes: 1 attachment of the given height, 1 stainless steel metal housing,
Instructions 4 retentive caps, 1 block-out spacer, 1 laboratory cap.

AlphaLoc Processing
AlphaLoc Retentive Caps
Package

Ref. No. 4875 4876 4877 4878 4879

Violet Clear Pink Yellow

Stainless steel metal housing, (strong retention) (standard retention) (soft retention) (extra soft retention)
block-out spacer, nylon retentive
includes
caps (violet, clear, pink and yellow),
laboratory cap (black) 4 units per package

78
 Conical Narrow Connection
overdenture restorations

ALPHALOC ACCESSORIES

LABORATORY CAP BLOCK OUT IMPRESSION MALE INSERTION EXTRACTION

(BLACK) SPACER COPING ANALOG TOOL* TOOL*

includes 4 Units 1 Unit 4 Units 4 Units 1 Unit 1 Pièce

Ref. No. 4882 4883 4884 4885 4886* 4887*

* In some markets, the insertion and extraction tool is provided as a single, dual sided instrument.

BALL ATTACHMENTS
B

20
A

Straight Ball Attachments NCM

C

Implant platform

A: 2.5 mm A: 2.5 mm A: 2.5 mm A: 2.5 mm A: 2.5 mm

Dimensions B: 2.5 mm B: 3.6 mm B: 3.6 mm B: 3.6 mm B: 3.6 mm
C: 1.0 mm C: 2.0 mm C: 3.0 mm C: 4.0 mm C: 5.0 mm

Code TB1-CHC TB2-CHC TB3-CHC TB4-CHC TB5-CHC

Ref. No. 7403 7404 7405 7406 7407

Instructions Use 1.25 driver for insertion (see page 27). Use nylon cap Ø 2.5 mm.

Nylon Cap for Ø 2.5 mm

Stainless steel Nylon Cap with Soft Nylon Cap

Nylon Cap
Housing Titanium Ring

Code H NC NCT NCA

Ref. No. 6240 6250 6251 6253

79
80
 Conical Standard Connection
Conical Standard
Connection (CS)
The MultiNeO implant is based on over three decades of proven clinical studies & experience.
The implant's conical connection, unique implant design features and the prosthetic line
contribute to preserving the soft and hard tissues in immediate and delayed implant procedures.

3.75, Ø 4.2, Ø 5.0

connection Conical Standard

Active implant designed for immediate implant procedures in a variety of bone types

recommended
bone type

• Tapered
DESIGN • Centering and anchoring features
FEATURES • Double, variable threads
• Micro-threads

• High primary stability

Clinical • Reduced marginal bone loss
Benefits • Increased surface area
• Increased BIC

ULTIMATE

Highly
recommended Optional

81
 MULTINEO SYSTEM multiple options

The MultiNeO implant System includes 3.75, 4.2 and 5.0 mm diameter implants with a Conical Standard (CS)
connection. It is compatible with Alpha-Bio Tec.'s Conical Standard prosthetic line and CAD/CAM restoration parts.

Dimensions
Diameter Length Ref. No.
A B C D H
Ø 3.75 8 mm 1938 Ø 3.75 Ø 3.1 Ø 1.8 Ø 3.1 2.5

10 mm 1930 Ø 3.75 Ø 2.9 Ø 1.5 Ø 3.1 2.5

11.5 mm 1931 Ø 3.75 Ø 2.9 Ø 1.5 Ø 3.1 2.5

13 mm 1933 Ø 3.75 Ø 2.9 Ø 1.5 Ø 3.1 2.5

16 mm 1936 Ø 3.75 Ø 2.9 Ø 1.5 Ø 3.1 2.5

Ø 4.2 8 mm 1948 Ø 4.2 Ø 3.55 Ø 1.8 Ø 3.1 2.5

10 mm 1940 Ø 4.2 Ø 3.3 Ø 1.8 Ø 3.1 2.5

11.5 mm 1941 Ø 4.2 Ø 3.3 Ø 1.8 Ø 3.1 2.5

13 mm 1943 Ø 4.2 Ø 3.3 Ø 1.8 Ø 3.1 2.5

16 mm 1946 Ø 4.2 Ø 3.3 Ø 1.8 Ø 3.1 2.5

Ø 5.0 8 mm 1958 Ø 5.0 Ø 4.4 Ø 2.6 Ø 3.1 2.5

10 mm 1950 Ø 5.0 Ø 4.1 Ø 2.3 Ø 3.1 2.5

11.5 mm 1951 Ø 5.0 Ø 4.1 Ø 2.3 Ø 3.1 2.5

13 mm 1953 Ø 5.0 Ø 4.1 Ø 2.3 Ø 3.1 2.5

New Implant System

IMPLANT PACKAGE Drivers

A modern and easy-to-use implant package Color coded grip drivers with gingival height
with enhanced ergonomics. markings and lead pin for centering and easy
insertion.

CS

82
 Conical Standard Connection
MULTINEO SYSTEM multiple options

Coronal Part
Design Features:
• Platform Switching
• Micro-threads
• Cutting flutes
• Internal hex and Conical standard
Clinical Benefits:
• Reduced pressure on cortical area
• Efficient cutting ability
• Improved bone preservation
• High initial stability

Implant Threads
Design Features:
• Variable thread design
• Double thread with 2.4mm step
• Micro-threads
Clinical Benefits:
• High cutting efficiency
• Osteotome like body
• Fast and controlled insertion
• Increased surface area
• Increased BIC

Implant Body and Core

Design Features:
• Straight coronal part
• Slightly tapered body
• Tapered core
• Tapered apical part
Clinical Benefits:
• Osteotome like body
• High primary stability

Apical Part
Design Features:
• Narrow apex
• Sharp and deep threads
• Patented centering feature
Clinical Benefits:
• High primary stability
• Easy navigation and penetration
• Efficient cutting capability

83
 multiNEO SYSTEM multiple options

Step Drilling Sequence

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 3.2/ Ø 3.65
Cortical*
Ø 3.75

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 / Ø 2.8 Ø 2.8 / Ø 3.2 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 3.2 / Ø 3.65 Ø 2.0 Ø 2.4 / Ø 2.8 Ø 3. 2 / Ø 3.65 Ø 3.65 / Ø 4.1
Cortical*
Ø 4.2

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 Ø 3.2 Ø 2.0 Ø 2.4 Ø 3.2 Ø 3.65 Ø 2.0 Ø 2.4 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5
/ Ø 2.8 / Ø 3.65 / Ø 2.8 / Ø 3.65 / Ø 4.1 / Ø 2.8 / Ø 3.65 / Ø 4.1 / Ø 4.5 / Ø 4.8
Ø 5.0 Cortical*

* Cortical – Drill through cortical plate with the larger diameter.

Straight Drilling Sequence

Ø 3.75 Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.4 Ø 2.8** Ø 2.0 Ø 2.8 Ø 3.2** Ø 2.0 Ø 2.8 Ø 3.2** Ø 3.65
Cortical*

Bone Type IV Bone Type II & III Bone Type I

Ø 4.2 Ø 2.0 Ø 2.8 Ø 3.2** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65** Ø 4.1
Cortical*

Bone Type IV Bone Type II & III Bone Type I

Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1** Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5** Ø 4.8
Ø 5.0 Cortical*

* Cortical – Drill through cortical plate

** 3mm shorter than implant's length. Note that drill can be replaced by a corresponding step drill throughout entire implant's length.
For more information, see step protocol.

Important: Professional considerations may be required for adaptations of the drill protocol in specific cases.

84
85
 Healing Abutments

Choosing the correct healing abutment

Diameter Laser marked height 1.5

mm
3.5
mm

* Use 1.25 mm driver.

The healing abutment should protrude from the soft tissue margin,
as shown. Broadening of the soft tissue

If broadening of the soft tissue is required, it is possible to use a slim

healing abutment (Ø 4.0 mm) first, and then switch to a standard or
wide healing abutment (Ø 4.9 or Ø 6.2 mm), according to the clinical
requirements.

Titanium Healing Abutments

Ø 4.0 mm Manual Tightening

A
C

Implant platform

A: Ø 4.0 mm A: Ø 4.0 mm A: Ø 4.0 mm A: Ø 4.0 mm A: Ø 4.0 mm

Dimensions B: 1.5 mm B: 2.5 mm B: 3.5 mm B: 4.5 mm B: 5.5 mm
C: 3 mm C: 4 mm C: 5 mm C: 6 mm C: 7 mm
HHS1.25 HHSS1.25
Code HA-D4-CH1.5-CS HA-D4-CH2.5-CS HA-D4-CH3.5-CS HA-D4-CH4.5-CS HA-D4-CH5.5-CS
4052 4053

Ref. No. 3401 3402 3403 3404 3405

Instructions Use 1.25 mm driver for insertion (see page 27).

Ø 4.9 mm
A
C

Implant platform

A: Ø 4.9 mm A: Ø 4.9 mm A: Ø 4.9 mm A: Ø 4.9 mm A: Ø 4.9 mm

Dimensions B: 1.5 mm B: 2.5 mm B: 3.5 mm B: 4.5 mm B: 5.5 mm
C: 3 mm C: 4 mm C: 5 mm C: 6 mm C: 7 mm

Code HA-D4.9-CH1.5-CS HA-D4.9-CH2.5-CS HA-D4.9-CH3.5-CS HA-D4.9-CH4.5-CS HA-D4.9-CH5.5-CS

Ref. No. 3407 3408 3409 3410 3411

86
 Conical Standard Connection
Healing Abutments & IMPRESSION

Ø 6.2 mm
A
C

Implant platform

A: Ø 6.2 mm A: Ø 6.2 mm
Dimensions B: 1.5 mm B: 2.5 mm
C: 3 mm C: 4 mm

Code HA-D6.2-CH1.5-CS HA-D6.2-CH2.5-CS

Ref. No. 3412 3413

Instructions Use 1.25 mm driver for insertion (see page 27)

Transfer selection
12 mm 15 mm It is recommended to use
the short or long closed/open tray transfers
with the utmost fit to the gingival design and the adjacent structures.

Impression Transfers

Short Closed Long Closed Short Open Long Open 30

Tray Transfer Tray Transfer Tray Transfer Tray Transfer NCM

Ø 3.5 mm Ø 5.5 mm

Ø 3.5 mm

3.2 mm
Ø 3.2 mm Ø 5.5 mm
Ø 3.2 mm
3.2 mm

15 mm 15 mm
19 mm 13.5 mm
12 mm 9.5 mm

3.5 mm 2.5 mm 3.5 mm

2.5 mm

Ø 4.7 mm Ø 4.7 mm Ø 4.7 mm

Ø 4.7 mm

Code SCTT-CS LCTT-CS SOTT-CS LOTT-CS

Ref. No. 3450 3451 3455 3456

Instructions Use 1.25 mm driver for insertion (see page 27).

Implant AnalogS

Ø 3.75 mm

Code BTT-N IA-CS

Ref. No. 5211 3459

Instructions For Multi-Unit restorations For plaster model

87
Cement Retained Restorations

Esthetic Titanium Abutments

Plastic 30
Straight Abutments with Various Cuff Heights NCM
Transfer
C
B

A
Implant platform

A: Ø 4.8 mm A: Ø 4.8 mm A: Ø 4.8 mm A: Ø 4.8 mm

To be used only on
Dimensions B: 1.5 mm B: 2.5 mm B: 3.5 mm B: 4.5 mm
straight titanium abutments
C: 9.5 mm C: 10.5 mm C: 11.5 mm C: 12.5 mm

Code TLA-H1.5-CS TLA-H2.5-CS TLA-H3.5-CS TLA-H4.5-CS HTLASP

Ref. No. 3501 3502 3503 3504 5364

Instructions Use 1.25 mm driver for insertion (see page 27).

30
Angled Abutments 15° Angled Abutments 25° NCM
E

E
D
C
B

D
C
B

A
A
Implant platform
Implant platform

A: Ø 4.8 mm A: Ø 4.8 mm A: Ø 4.8 mm A: Ø 4.8 mm

B: 1.5 mm B: 2.5 mm B: 1.5 mm B: 2.5 mm
Dimensions C: 2 mm C: 3 mm Dimensions C: 2 mm C: 2 mm
D: 3 mm D: 4 mm D: 3 mm D: 3 mm
E: 10.5 mm E: 11.5 mm E: 10.5 mm E: 11.5 mm

Code TLA-15-H1.5-CS TLA-15-H2.5-CS Code TLA-25-H1.5-CS TLA-25-H2.5-CS

Ref. No. 3511 3512 Ref. No. 3514 3515

Instructions Use 1.25 mm driver for insertion (see page 27).

Temporary Abutments Casting Abutments

30
Temporary Abutments screw CoCr Base Abutments* NCM
D
C
B

16.2 mm
16.2 mm

A
Implant platform
2.2 mm
2.2 mm

A: Ø 4.7 mm A: Ø 4.7 mm 1.5 mm 1.5 mm

B: 1.5 mm B: 1.5 mm
Dimensions
C: 2 mm C: 2 mm
4.7 mm 4.7 mm
D: 10 mm D: 10 mm

Code TA-AR-CS TA-R-CS CCS-CS CoCr-AR-CHCS CoCr-R-CHCS

Ref. No. 3532 3533 3462 3846 3847

Melting Range: 1200°C - 1330°C
Recommended sintering below 900°C
Instructions Use 1.25 mm driver for insertion (see page 27).

* Note: remove screw and titanium base before sintering

88
 Conical Standard Connection
SCREW RETAINED Restorations

Closed
Angled Abutments Implants Straight Abutments Open Tray Transfer
Tray

A: Ø 4.7 mm
3870 B: 0.5 mm
3862 A: Ø 4.7 C: 0.75 mm
AU 17-1.5 CS B: 1.5 mm TCT-0.75-CS
D: 1.9 mm

A: Ø 4.7 mm 5231 5248 5235

B: 1.5 mm TST-N TCT-N-R TS-N
3863 A: Ø 4.7 3871 C: 2 mm
AU 17-2.5 CS B: 2.5 mm TCT-1.5-CS D: 3.2 mm ANALOG

A: Ø 4.7 mm
B: 2.5 mm 5211
3684 A: Ø 4.7 Ø 3.75 3872 C: 3 mm BTT-N
AU 17-3.5 CS B: 3.5 mm TCT-2.5-CS D: 4.2 mm

Ø 4.2
Fixation Screw

3867 A: Ø 4.7 Ø5
AU 30-1.5 CS B: 1.5 mm
6092 6093
SF-N SFT-N

3868 A: Ø 4.7 Temporary Abutment

AU 30-2.5 CS B: 2.5 mm

5216
TTA-N
3869 A: Ø 4.7
AU 30-3.5 CS B: 3.5 mm
Includes screw 6092.

Pro Healing Abutments

A 5236
A HCT4-N
C

D
B

5237
B

HCT6-N

Integrated screw
4055 4057
1.25 mm 1.5 mm Burnout Sleeve

1.25 mm Driver 1.5 mm Driver

5217 5218
PST-N-AR PST-N

includes screw 6093.

4052 4053 4061 4055 4056 4165 4059 4060 4057 4058 4168
HHS HHSS HTD HTD HTD HTD HHS 1.5 HHL 1.5 HTD 1.5 HTD 1.5S HT 1.5
1.25 1.25 1.25 L 1.25 1.25 S 1.25 M

torque

4572
Straight Multi-Unit abutments CS 30 Ncm
Torque Ratchet

Impression transfer and healing abutment Manual Tightening

Temporary abutments 25 Ncm

Angled multi-unit abutment CS 30 Ncm

89
 SCREW RETAINEd Restorations

MULTI-UNIT ABUTMENTS

Angle 17° Angle 30°

30
NCM
A
B

A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm

Dimensions
B: 1.5 mm B: 2.5 mm B: 3.5 mm B: 1.5 mm B: 2.5 mm B: 3.5 mm

Code AU-17-1.5-CS AU-17-2.5-CS AU-17-3.5-CS AU-30-1.5-CS AU-30-2.5-CS AU-30-3.5-CS

Ref. No. 3862 3863 3864 3867 3868 3869

Instructions Use 1.25 mm driver for insertion (see page 27).

30
MULTI-UNIT STRAIGHT ABUTMENTS NCM
A
C

D
B

Implant platform

A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm

B: 0.5 mm B: 1.5 mm B: 2.5 mm
Dimensions
C: 0.75 mm C: 2 mm C: 3 mm
D: 1.9 mm D: 3.2 mm D: 4.2 mm
Code TCT-0.75-CS TCT-1.5-CS TCT-2.5-CS

Ref. No. 3870 3871 3872

Instructions Use 1.5 mm driver for insertion (see page 27).

HBC ABUTMENTS
30
STRAIGHT ABUTMENTS - FOR SINGLE IMPLANT RESTORATION NCM
D
C
B

Implant platform

A: Ø 4.7 mm A: Ø 4.7 mm A: Ø 4.7 mm

B: 0.5 mm B: 1.5 mm B: 2.5 mm
Dimensions
C: 0.75 mm C: 2 mm C: 3 mm
D: 2.8 mm D: 4.1 mm D: 5.1 mm
Note: package includes HBC
Code HBC-H0.75-CS HBC-H1.5-CS HBC-H2.5-CS
abutment screw and burnout
Ref. No. 3876 3877 3878 sleeve.

Instructions Use 1.25 mm driver for insertion (see page 27).

90
 Conical Standard Connection
CAD/CAM RESTORATION PARTS

DUAL USE SCAN BODIES FOR MULTI-UNITS

10 ADHESIVE COPINGS FOR MULTI-UNITS
NCM

Engaged Non-Engaged

Height 7 mm 7 mm 3.5 mm 3.5 mm

Code IOSB-TCT-N-R IOSB-TCT-N TAC-TCT-N TAC-TCT-N-R

Ref. No. 3883 5003 5028 5029

For bridge/bar restorations For single crown restorations

For single For bar/bridge
Instructions with multi-unit straight and with multi-unit angled
tooth restorations restorations
angled abutments abutments

Screw included

Screws Retrieval Screw

Code SF-N SFT-N S-DM-SR STLA-CS RS

Ref. No. 6092 6093 4994 3510 5110

Direct mounting
Fixation screw on metal frame. Prosthetic Fits IH
Black coated screw for
Instructions for Multi-Unit Should not be used for
Lab replacement screw and CS platforms
restoration full zirconia or ceramic
restorations

PRE-MILLED BLANKS ANALOG

A A
B

B
C

Implant Implant
platform platform

A: Ø15.8 mm
A: Ø11.5 mm
Dimensions B: 20 mm
B: 20 mm
C: 15 mm

Code WBA-PF-CS BA-PF-CS Code AN-PM-CS

Ref. No. 3855 3854 Ref. No. 3838

Instructions For Preface® abutment holder. Screw included Instructions For resin printed model

91
 CAD/CAM RESTORATION PARTS 3.75, 4.2, 5.0

DUAL USE SCAN BODY

Manual
Height 10 mm Tightening

code IOSB-CS

REF. NO. 3837

INSTRUCTION Use 1.25 mm driver for insertion (see page 27)

30
Ti-Bases - Engaged NCM
A
B

D
C

Implant
platform

Gingival Height 0.75 mm 1.5 mm 2.5 mm

A: Ø4.7 mm A: Ø4.7 mm A: Ø4.7 mm

B: 4 mm B: 4 mm B: 4 mm
Dimensions
C: 4.87 mm C: 5.62 mm C: 6.62 mm
D: 0.5 mm D: 0.53 mm D: 0.5 mm

Code TB-0.75-AR-CS TB-1.5-AR-CS TB-2.5-AR-CS

Ref. No. 3832 3840 3842

Instructions Screw included.

Ti-Bases - Non Engaged

30
NCM
A
B

D
C

Implant
platform

Gingival Height 0.75 mm 1.5 mm 2.5 mm

A: Ø4.7 mm A: Ø4.7 mm A: Ø4.7 mm

B: 4 mm B: 4 mm B: 4 mm
Dimensions
C: 4.87 mm C: 5.62 mm C: 6.62 mm
D: 0.53 mm D: 0.53 mm D: 0.53 mm

Code TB-0.75-R-CS TB-1.5-R-CS TB-2.5-R-CS

Ref. No. 3833 3841 3843

Instructions Screw included.

Sirona Compatible
ti-base SCAN POST
30
NCM

Code CSTB-CS-SI CSSP-CS-SI

Ref. No. 3856 3857

Instructions For scanning and/or restoration use For scanning only

92
 Conical Standard Connection
OVERDENTURE RESTORATIONs

ALPHALOC ABUTMENT SYSTEM

AlphaLoc 30
NCM
A
C
B

Implant platform

A: Ø 3.1 mm A: Ø 3.9 mm A: Ø 3.9 mm A: Ø 3.9 mm

Dimensions B: 0.75 mm B: 2 mm B: 3 mm B: 4 mm
C: 2.4 mm C: 3.7 mm C: 4.7 mm C: 5.7 mm

Code AK-0.75 - CS AK-1.5 - CS AK-2.5 - CS AK-3.5 - CS

Ref. No. 3710 3711 3712 3713

Kit includes: 1 AlphaLoc abutment of the given height, 1 stainless steel metal housing, 4 retentive caps,
Instructions
1 block-out spacer, 1 laboratory cap. Use 1.25 mm driver for insertion (see page 27)

AlphaLoc Processing
AlphaLoc Retentive Caps
Package

Ref. No. 4875 4876 4877 4878 4879

Violet Clear Pink Yellow

Stainless steel metal housing,
block-out spacer, nylon retentive (strong retention) (standard retention) (soft retention) (extra soft retention)
Includes
caps (violet, clear, pink and yellow),
laboratory cap (black) 4 units per package

ALPHALOC ACCESSORIES

Laboratory Cap Block Out Impression male Insertion Extraction

(black) Spacer Coping Analog Tool * Tool *

Content 4 Units 1 Unit 4 Units 4 Units 1 Unit 1 Unit

Ref. No. 4882 4883 4884 4885 4886* 4887*

* In some markets, the insertion and extraction tool is provided as a single, dual sided instrument.

93
Guided Surgery Tool Kit (GSTK)

Use the software of your choice with the Alpha-Bio Tec. GSTK
The tray features a modular layout.
The contents are organized to support the entire guided surgery procedure from site preparation to final implantation.
All kit components fit the matching master sleeves.

1 2 3 4
SITE IMPLANT TOOLS &
PREPARATION OSTEOTOMY PLACEMENT ACCESSORIES

Note: The ratchet is NOT included in the kit. Image is for illustration purposes only.

94
gstk

Contains tissue punches, drills, and pins required to

1 SITE PREPARATION
prepare the osteotomy and anchor the surgical guide.

GSTK kit
Contains the color-coded drills required for the
2 OSTEOTOMY
drilling sequence to perform the guided osteotomy.

Contains implant mounts and their associated screws

required to place the implant through the guide.
IMPLANT
3 PLACEMENT
The implant mounter is attached to the implant and
enables increased accuracy and predictability of
implant positioning during placement.

Contains a variety of tools and accessories required

TOOLS &
4 ACCESSORIES
to perform the surgical procedure without the need
of supplementary external tools.

95
gstk

Use the software of your choice with the Alpha-Bio Tec. GSTK

The kit is available in 3 different configurations:

Full guided surgery kit for Internal Hex (IH)

Ref., KIT#65000
and Conical Narrow Connections (CHC)

Full guided surgery kit for Conical Standard (CS)

Ref., KIT#65002
and Conical Narrow Connections (CHC)

Full guided surgery kit for Internal Hex (IH),

Ref., KIT#65003 Conical Standard (CS)
and Conical Narrow Connections (CHC)

* Note: The ratchet is NOT included in the kit.

The Sleeves

Master Sleeve Securing Sleeve

Used for guided drilling and implant insertion Used to support lateral pin

Ø4.1 Ø5.5
mm mm

Code SLS SLL SLSE

Ref. No. 66012 66013 66014
QTY. 5 5 5
For Ø 3.2, Ø 3.3, Ø 3.5, For Ø 4.2, Ø 4.65, Ø 5.0, For 1.5 mm drill
INFO. Ø 3.7N, Ø 3.75 implants and lateral pin
and Ø 5.3 implants

NOTE: When using the Ø5.5 mm sleeve, an adaptor should be used in the initial drilling sequence to mitigate the tool size. If sleeve adaptors are
used for the site preparation and osteotomy stages, they must be removed before inserting the implant through the guide (when applicable).
Drills and implant mounts are prolonged by a fixed 9 mm to meet the extra height attained by the surgical guide, i.e. the tool’s stopper is
located exactly 9 mm above the implant level.
Master sleeves and securing sleeves are not supplied in the GSTK box. Sleeves are sold separately in units of 5 per/pkg.

96
gstk Ordering Information

1 SITE PREPARATION
Tissue Punch Crestal Drill Lateral Pin Ø 1.5 Milling Drill

GSTK kit
small LARGE small LARGE

Code TPS TPL CDS CDL LP MCD1.5

Ref. No. 65003 65004 65005 65006 65047 65050

2 OSTEOTOMY (For each diameter and length: Qty 1)

Ø 2.0 Ø 2.4 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.1 Ø 4.5

Surgical Drills Surgical Drills Surgical Drills Surgical Drills Surgical Drills Surgical Drills Surgical Drills

LENGTH Code REF. NO. Code REF. NO. Code REF. NO. Code REF. NO. Code REF. NO. Code REF. NO. Code REF. NO.

8 mm CD2-8 65007 CD2.4-8 65070 CD2.8-8 65012 CD3.2-8 65017 CD3.65-8 65022 CD4.1-8 65027 CD4.5-8 65032

10 mm CD2-10 65008 CD2.4-10 65071 CD2.8-10 65013 CD3.2-10 65018 CD3.65-10 65023 CD4.1-10 65028 CD4.5-10 65033

11.5 mm CD2-11.5 65009 CD2.4-11.5 65072 CD2.8-11.5 65014 CD3.2-11.5 65019 CD3.65-11.5 65024 CD4.1-11.5 65029 CD4.5-11.5 65034

13 mm CD2-13 65010 CD2.4-13 65073 CD2.8-13 65015 CD3.2-13 65020 CD3.65-13 65025 CD4.1-13 65030 CD4.5-13 65035

16 mm CD2-16 65011 CD2.4-16 65074 CD2.8-16 65016 CD3.2-16 65021 CD3.65-16 65026 CD4.1-16 65031 CD4.5-16 65036

3 IMPLANT PLACEMENT
Implant Mount Implant Mount Implant Mount
Implant Mount IH Implant Mount CS
Screw IH/CS CHC CHC Screw

small LARGE small LARGE

Code IMS IML IMSC_CS IMLC_CS IMHS IMC IMCS

Ref. No. 65037 65038 65064 65065 65039 65055 65056

4 TOOLS & ACCESSORIES (Must be removed before implant insertion)

Universal
Implant
Implant Handpiece Implant Square L/S Sleeve
Screw- Hex Sleeve Mount
Mount Insertion Mount Ratchet Adaptor Crestal Pin Implant Mount
driver Driver Adaptor CHC
Extension Adaptor Extractor Head Driver
Driver
Adaptor

Enables use Used for

ONE of 4 mm adapting the small LARGE small LARGE
SHORT
SIZE square driver small diameter
heads drills to the
large sleeve (SLL)

Ø4.1
mm

Code HHSS1.25 HTD1.25S IMX HIA IME USH SAD SLSA* CPS CPL IMSD IMLD IMCD

Ref. No. 4053 4056 65042 65044 65045 4012 65057 65058 65048 65049 65062 65063 65061

97
98
PRODUCTS
LIST
& REF. NO.

99
 Page
Ref. No. Code Product Description
No.

109 HS3 Healing Abutmen L3.0mm 45

110 HS5 Healing Abutmen L5.0mm 45
112 HSS3 Slim Healing Abutment L3.0mm 44 40
113 HSS5 Slim Healing Abutment L5.0mm 44 40
114 HSS4 Slim Healing Abutment L4.0mm 44 40
116 HS2 Healing Abutment L2.0mm 45 40
117 HS4 Healing Abutment L4.0mm 45 40
118 HS6 Healing Abutment L6.0mm 45 40
119 HS7 Healing Abutment L7.0mm 45 40
124 HS5-3 Healing Abutment D5.0 H3.0mm 45 40
125 HS5-5 Healing Abutment D5.0 H5.0mm 45 40
126 HS5.5-3 Healing Abutment D5.5 L3.0mm 45 40
127 HS5.5-5 Healing Abutment D5.5 H5.0mm 45 40
128 HS6-3 Healing Abutment D6.0 H3.0mm 45 40
129 HS6-5 Healing Abutment D6.0 H5.0mm 45 40
130 HS7-3 Healing Abutment D7.0 H3.0mm 45 40
1000 ICE Implant Classical Esthetic Narrow  D3.7mm L10mm 34 40
1001 ICE Implant Classical Esthetic Narrow D3.7mm L11.5mm 34 40
1003 ICE Implant Classical Esthetic Narrow  D3.7mm L13mm 34 40
1010 ICE Implant Classical Esthetic D3.75mm L10mm 34
1011 ICE Implant Classical Esthetic D3.75mm L11.5mm 34
1013 ICE Implant Classical Esthetic D3.75mm L13mm 34
1016 ICE Implant Classical Esthetic D3.75mm L16mm 34
1018 ICE Implant Classical Esthetic D3.75mm L8mm 34
1020 ICE Implant Classical Esthetic D4.2mm L10mm 34
1021 ICE Implant Classical Esthetic D4.2mm L11.5mm 34
1023 ICE Implant Classical Esthetic D4.2mm L13mm 34
1026 ICE Implant Classical Esthetic D4.2mm L16mm 34
1028 ICE Implant Classical Esthetic D4.2mm L8mm 34
1030 ICE Implant Classical Esthetic D4.65mm L10.0mm 34
1031 ICE Implant Classical Esthetic D4.65mm L11.5mm 34
1033 ICE Implant Classical Esthetic D4.65mm L13.0mm 34
1036 ICE Implant Classical Esthetic D4.65mm L6.0mm 34
1038 ICE Implant Classical Esthetic D4.65mm L8.0mm 34
1040 ICE Implant Classical Esthetic D5.3mm L10mm 34
1041 ICE Implant Classical Esthetic D5.3mm L11.5mm 34
1043 ICE Implant Classical Esthetic D5.3mm L13mm 34
1046 ICE Implant Classical Esthetic D5.3mm L6mm 34
1048 ICE Implant Classical Esthetic D5.3mm L8mm 34
1056 ICE Implant Classical Esthetic D4.2mm L6mm 34
1060 NICE NICE D3.2mm L10mm 66
1061 NICE NICE D3.2mm L11.5mm 66
1063 NICE NICE D3.2mm L13mm 66
1066 NICE NICE D3.2mm L16mm 66

1068 NICE NICE D3.2mm L8mm 66

100
 PRODUCTS LIST & REF. NO.
Page
Ref. No. Code Product Description
No.

1260 DFI Dual Fit Implant D3.75mm L10.0mm 42

1261 DFI Dual Fit Implant D3.75mm L11.5mm 42
1263 DFI Dual Fit Implant D3.75mm L13.0mm 42
1266 DFI Dual Fit Implant D3.75mm L16.0mm 42
1268 DFI Dual Fit Implant D3.75mm L8.0mm 42
1270 DFI Dual Fit Implant D4.2mm L10.0mm 42
1271 DFI Dual Fit Implant D4.2mm L11.5mm 42
1273 DFI Dual Fit Implant D4.2mm L13.0mm 42
1276 DFI Dual Fit Implant D4.2mm L16.0mm 42
1278 DFI Dual Fit Implant D4.2mm L8.0mm 42
1280 DFI Dual Fit Implant D3.3mm L10.0mm 42
1281 DFI Dual Fit Implant D3.3mm L11.5mm 42
1283 DFI Dual Fit Implant D3.3mm L13.0mm 42
1286 DFI Dual Fit Implant D3.3mm L16.0mm 42
1288 DFI Dual Fit Implant D3.3mm L8.0mm 42
1290 DFI Dual Fit Implant D5.0mm L10.0mm 42
1291 DFI Dual Fit Implant D5.0mm L11.5mm 42
1293 DFI Dual Fit Implant D5.0mm L13.0mm 42

1296 DFI Dual Fit Implant D5.0mm L16.0mm 42

1298 DFI Dual Fit Implant D5.0mm L8.0mm 42
1300 Spiral Spiral Implant D3.3mm L10.0mm 38
1301 Spiral Spiral Implant D3.3mm L11.5mm 38
1303 Spiral Spiral Implant D3.3mm L13.0mm 38
1306 Spiral Spiral Implant D3.3mm L16.0mm 38
1308 Spiral Spiral Implant D3.3mm L8.0mm 38
1330 Spiral Spiral Implant D4.2mm L10.0mm 38
1331 Spiral Spiral Implant D4.2mm L11.5mm 38
1333 Spiral Spiral Implant D4.2mm L13.0mm 38
1336 Spiral Spiral Implant D4.2mm L16.0mm 38
1338 Spiral Spiral Implant D4.2mm L8.0mm 38
1340 Spiral Spiral Implant D5.0mm L10.0mm 38
1341 Spiral Spiral Implant D5.0mm L11.5mm 38
1343 Spiral Spiral Implant D5.0mm L13.0mm 38
1346 Spiral Spiral Implant D5.0mm L16.0mm 38
1348 Spiral Spiral Implant D5.0mm L8.0mm 38
1350 Spiral Spiral Implant D3.75mm L10.0mm 38
1351 Spiral Spiral Implant D3.75mm L11.5mm 38
1353 Spiral Spiral Implant D3.75mm L13.0mm 38
1356 Spiral Spiral Implant D3.75mm L16.0mm 38
1358 Spiral Spiral Implant D3.75mm L8.0mm 38
1360 Spiral Spiral Implant D6.0mm L10.0mm 38
1361 Spiral Spiral Implant D6.0mm L11.5mm 38
1363 Spiral Spiral Implant D6.0mm L13.0mm 38
1368 Spiral Spiral Implant D6.0mm L8.0mm 38
1900 MULTINEO MULTINEO C D3.2mm L10.0mm 62

101
 Page
Ref. No. Code Product Description
No.

1901 MULTINEO MULTINEO C D3.2mm L11.5mm 62

1903 MULTINEO MULTINEO C D3.2mm L13.0mm 62 40

1906 MULTINEO MULTINEO C D3.2mm L16.0mm 62 40
1908 MULTINEO MULTINEO C D3.2mm L8.0mm 62 40
1920 MULTINEO MULTINEO C D3.5mm L10.0mm 62 40
1921 MULTINEO MULTINEO C D3.5mm L11.5mm 62 40
1923 MULTINEO MULTINEO C D3.5mm L13.0mm 62 40
1926 MULTINEO MULTINEO C D3.5mm L16.0mm 62 40
1928 MULTINEO MULTINEO C D3.5mm L8.0mm 62 40
1930 MULTINEO MULTINEO CS D3.75mm L10.0mm 82 40
1931 MULTINEO MULTINEO CS D3.75mm L11.5mm 82 40
1933 MULTINEO MULTINEO CS D3.75mm L13.0mm 82 40
1936 MULTINEO MULTINEO CS D3.75mm L16.0mm 82 40
1938 MULTINEO MULTINEO CS D3.75mm L8.0mm 82 40
1940 MULTINEO MULTINEO CS D4.2mm L10.0mm 82 40
1941 MULTINEO MULTINEO CS D4.2mm L11.5mm 82 40
1943 MULTINEO MULTINEO CS D4.2mm L13.0mm 82 40
1946 MULTINEO MULTINEO CS D4.2mm L16.0mm 82
1948 MULTINEO MULTINEO CS D4.2mm L8.0mm 82
1950 MULTINEO MULTINEO CS D5.0mm L10.0mm 82
1951 MULTINEO MULTINEO CS D5.0mm L11.5mm 82
1953 MULTINEO MULTINEO CS D5.0mm L13.0mm 82
1958 MULTINEO MULTINEO CS D5.0mm L8.0mm 82
1960 MULTINEO MULTINEO H D3.75mm L10.0mm 30
1961 MULTINEO MULTINEO H D3.75mm L11.5mm 30
1963 MULTINEO MULTINEO H D3.75mm L13.0mm 30
1966 MULTINEO MULTINEO H D3.75mm L16.0mm 30
1968 MULTINEO MULTINEO H D3.75mm L8.0mm 30
1970 MULTINEO MULTINEO H D4.2mm L10.0mm 30
1971 MULTINEO MULTINEO H D4.2mm L11.5mm 30
1973 MULTINEO MULTINEO H D4.2mm L13.0mm 30
1976 MULTINEO MULTINEO H D4.2mm L16.0mm 30
1978 MULTINEO MULTINEO H D4.2mm L8.0mm 30
1980 MULTINEO MULTINEO H D5.0mm L10.0mm 30
1981 MULTINEO MULTINEO H D5.0mm L11.5mm 30
1983 MULTINEO MULTINEO H D5.0mm L13.0mm 30
1988 MULTINEO MULTINEO H D5.0mm L8.0mm 30
3401 HA-D-4-CH-1.5-CS Healing Abutment D4 L1.5 CS 86
3402 HA-D-4-CH-2.5-CS Healing Abutment D4 L2.5 CS 86
3403 HA-D-4-CH-3.5-CS Healing Abutment D4 L3.5 CS 86
3404 HA-D-4-CH-4.5-CS Healing Abutment D4 L4.5 CS 86
3405 HA-D-4-CH-5.5-CS Healing Abutment D4 L5.5 CS 86
3407 HA-D-4.9-CH-1.5-CS Healing Abutment D4.9 L1.5 CS 86
3408 HA-D-4.9-CH-2.5-CS Healing Abutment D4.9 L2.5 CS 86
3409 HA-D-4.9-CH-3.5-CS Healing Abutment D4.9 L3.5 CS 86

102
 PRODUCTS LIST & REF. NO.
N° de
Ref. No. Code Product Description
page

3410 HA-D-4.9-CH-4.5-CS Healing Abutment D4.9 L4.5 CS 86

3411 HA-D-4-CH-5.5-CS Healing Abutment D4.9 L5.5 CS 86
3412 HA-D-6.2-CH-1.5-CS Healing Abutment D6.2 L1.5 CS 87
3413 HA-D-6.2-CH-2.5-CS Healing Abutment D6.2 L2.5 CS 87
3450 SCTT-CS Short Closed Tray Transfer 87
3451 LCTT-CS Long Closed Tray Transfer 87
3455 SOTT-CS Short Open Tray Transfer 87
3456 LOTT-CS Long Open Tray Transfer 87
3459 IA-CS Implants Analog CS 87
3462 CC S-CS CrCo Casting Screw CS 88
3501 TLA-H-1.5-CS Straight Titanium Abutments H1.5mm CS 88
3502 TLA-H-2.5-CS Straight Titanium Abutments H2.5mm CS 88
3503 TLA-H-3.5-CS Straight Titanium Abutments H3.5mm CS 88
3504 TLA-H-4.5-CS Straight Titanium Abutments H4.5mm CS 88
3511 TLA-15-H-1.5-CS Angled Abutment 15° CH1.5 CS 88
3512 TLA-15-H-2.5-CS Angled Abutment 15° CH2.5 CS 88
3514 TLA-25-H-1.5-CS Angled Abutment 25° CH1.5 CS 88
3515 TLA-25-H-2.5-CS Angled Abutment 25° CH2.5 CS 88
3532 TA-AR-CS Temporary Titanium Abutments AR 88
3533 TA-R-CS Temporary Titanium Abutments R 88
3613 TLABCC-CHC Chrome Cobalt Casting Abutment - CHC 72
3614 TLABCC-R-CHC Chrome Cobalt Casting Abutment Rotational - CHC 72
3616 CCS-CHC CrCo Casting screw -CHC 72
3710 AA-0.75-CS AlphaLoC Kit H 0.75 mm CS 93
3711 AA-1.5-CS AlphaLoC Kit H 1.5 mm CS 93
3712 AA-2.5-CS AlphaLoC Kit H 2.5 mm CS 93
3713 AA-3.5-CS AlphaLoC Kit H 3.5 mm CS 93
3801 ITD2.5 S CS Implant Grip Driver Short 24
3803 ITD-2.5 L-CS Implant Grip Driver Long 24
3804 IT-2.5-SM-CS Motor Mount Driver Short 2.5mm CS 24
3805 IT-2.5-LM-CS Motor Mount Driver Long 2.5mm CS 24
3806 MITD-2.5-CS Manual Implant Driver 2.5mm CS 24
3832 TB-0.75-AR-CS CAD/CAM Straight Ti-Base for restoration on CS implants 92
3833 TB-0.75-R-CS CAD/CAM Straight Ti-Base for restoration on CS implants 92
3837 IOSB-CS CAD/CAM Dual-use Scan Body for restoration on CS implants 92
3838 AN-PM-CS Analog for printed model CS 91
3840 TB-1.5-AR-CS CAD/CAM Straight Ti-Base for restoration on CS implants 92
3841 TB-1.5-R-CS CAD/CAM Straight Ti-Base for restoration on CS implants 92
3842 TB-2.5-AR-CS CAD/CAM Straight Ti-Base for restoration on CS implants 92
3843 TB-2.5-R-CS CAD/CAM Straight Ti-Base for restoration on CS implants 92
3846 CoCr-AR-CHCS CoCr Casting Abutment AR CS 88
3847 CoCr-R-CHCS CoCr Casting Abutment R CS 88
3854 BA-PF-CS CAD/CAM Pre-milled Blank D11.5mm for restoration on CS implants 91
3855 WBA-PF-CS CAD/CAM Pre-milled Blank D15.8mm for restoration on CS implants 91
3856 CSTB-CS-SI CAD/CAM SIRONA Straight Ti-Base for restoration on CS implants 92

103
 Ref. No. Code Product Description Page No.

3857 CSSP-CS-SI CAD/CAM SIRONA Scan Post for restoration on CS implants 92

3862 AU 17-1.5-CS Multi Unit Angled abutment 17° 1.5mm for restoration on CS implants 89, 90
3863 AU 17-2.5-CS Multi Unit Angled abutment 17° 2.5mm for restoration on CS implants 89, 90
3864 AU 17-3.5-CS Multi Unit Angled abutment 17° 3.5mm for restoration on CS implants 89, 90
3867 AU 30-1.5-CS Multi Unit Angled abutment 30° 1.5mm for restoration on CS implants 89, 90
3868 AU 30-2.5-CS Multi Unit Angled abutment 30° 2.5mm for restoration on CS implants 89, 90
3869 AU 30-3.5-CS Multi Unit Angled abutment 30° 3.5mm for restoration on CS implants 89, 90
3870 TCT 0.75-CS TCT-N L0.5mm abutment for restoration for up to 30° On CS Implants 89, 90
3871 TCT-1.5-CS TCT-N L1.5mm abutment for restoration for up to 30° On CS Implants 89, 90
3872 TCT-2.5-CS TCT-N L2.5mm abutment for restoration for up to 30° On CS Implants 89, 90
3876 HBC-H0.75-CS HBC L0.5mm for Single Implant Restoration on CS Implants 90
3877 HBC-H1.5-CS HBC L1.5mm for Single Implant Restoration on CS Implants 90
3878 HBC-H2.5-CS HBC L2.5mm for Single Implant Restoration on CS Implants 90
3883 IOSB-TCT-N-R Dual Use Scan Body for bridge restoration for multi unit 56,76,91
4052 HHS1.25 Hand Hex Screw Driver 1.25mm 27,54, 68,74,89
4053 HHSS1.25 Short Hand Hex Screw Driver 1.25mm 27,54, 68,74,89
4055 HTD 1.25 Hex Driver 1.25mm 27,54, 68,74,89
4056 HTD 1.25 S Short Hex Driver 1.25mm 27,54, 74,89,97
4057 HTD1.5 Short Hex Driver 1.5mm 27,54, 74,89,97
4058 HTD1.5S Pro Short Hex Driver 1.5mm 27,54, 74,89,97
4059 HHS1.5 Pro Hand Hex Screw Driver 1.5mm 27,54, 74,89,97
4060 HHL1.5 Pro Hand Hex Long Screw Driver 1.5mm 27,54, 774,89,97
4061 HTD 1.25L Long Hex Driver 1.25mm 27,54, 74,89,97
4071 ITS 2.5/1.25 Short Motor Mount Hex Driver 2.5/1.25mm 25
4080 PDG Parallel Depth Guide 26
4081 PDGS Short Parallel Depth Guide 26
4082 PG Drilling Parallel Guide 26
4100 IDG Implant Depth Probe 26
4140 G-ITDL2.5 Implant Grip Driver Long 2.5mm 25
4141 G-ITDM2.5 Implant Grip Driver Standard 2.5mm 25
4142 G-ITDS2.5 Implant Grip Driver Short 2.5mm 25
4143 GITL2.5/1.25 Motor Mount Grip Driver Long 2.5/1.25mm 25
4145 GITS2.5/1.25 Motor Mount Grip Driver Short 2.5/1.25mm 25
4146 MITD2.5-IH Implant Hand Driver 2.5mm IH 25
4147 MITD2.1 CHC Implant Hand Driver 2.1mm CHC 24
4152 ITD 2.5 S Hex Driver 2.5mm 25
4153 ITD 2.5 SS Short Hex Driver 2.5mm 25
4161 IT 2.5M+ Motor Mount Hex Driver 2.5/1.25mm 25
4165 HT 1.25M Motor Mount Hex Driver 1.25mm 27
4168 HT1.5 Motor Mount Hex Driver 1.5m 27
4220 SDH Surgical Screwdriver 26
4240 DX Drill Extension L17.5mm 21
4304 RB3 Round Burr D3.0mm 21
4550 BD2.0 Alpha Straight Drill_D2.0 22
4551 BD2.4 Alpha Straight Drill_D2.4 22

104
 PRODUCTS LIST & REF. NO.
Ref. No. Code Product Description Page No.

4552 BD2.8 Alpha Straight Drill_D2.8 22

4553 BD3.0 Alpha Straight Drill_D3.0 22
4554 BD3.2 Alpha Straight Drill_D3.2 22
4555 BD3.65 Alpha Straight Drill_D3.65 22
4556 BD4.1 Alpha Straight Drill_D4.1 22
4557 BD4.5 Alpha Straight Drill_D4.5 22
4558 BD4.8 Alpha Straight Drill_D4.8 22
4559 BD5.2 Alpha Straight Drill_D5.2 22
4560 BD5.8 Alpha Straight Drill_D5.8 22
4561 DS-A-L6 Alpha Drill Stopper A-D2.0-2.4 L6 20
4562 DS-A-L8 Alpha Drill Stopper A-D2.0-2.4 L8 20
4563 DS-A-L10 Alpha Drill Stopper A-D2.0-2.4 L10 20
4564 DS-A-L11.5 Alpha Drill Stopper A-D2.0-2.4 L11.5 20
4565 DS-A-L13 Alpha Drill Stopper A-D2.0-2.4 L13 20
4566 DS-B-L6 Alpha Drill Stopper B-D2.8-3.0 L6 20

4567 DS-B-L8 Alpha Drill Stopper B-D2.8-3.0 L8 20

4568 DS-B-L10 Alpha Drill Stopper B-D2.8-3.0 L10 20
4569 DS-B-L11.5 Alpha Drill Stopper B-D2.8-3.0 L11.5 20
4570 DS-B-L13 Alpha Drill Stopper B-D2.8-3.0 L13 20
4572 URT Universal Torque Ratchet 10-45Ncm 26
4573 DS-C-L6 Alpha Drill Stopper C-D3.2-3.65 L6 20
4574 DS-C-L8 Alpha Drill Stopper C-D3.2-3.65 L8 20
4575 DS-C-L10 Alpha Drill Stopper C-D3.2-3.65 L10 20
4576 DS-C-L11.5 Alpha Drill Stopper C-D3.2-3.65 L11.5 20
4577 DS-C-L13 Alpha Drill Stopper C-D3.2-3.65 L13 20
4578 DS-D-L6 Alpha Drill Stopper D-D4.1-4.5 L6 20
4579 DS-D-L8 Alpha Drill Stopper D-D4.1-4.5 L8 20
4580 DS-D-L10 Alpha Drill Stopper D-D4.1-4.5 L10 20
4581 DS-D-L11.5 Alpha Drill Stopper D-D4.1-4.5 L11.5 20
4582 DS-D-L13 Alpha Drill Stopper D-D4.1-4.5 L13 20
4590 BSD2.0-2.4 Alpha Step Drill_2.0/2.4 22
4592 BSD2.4-2.8 Alpha Step Drill_2.4/2.8 22
4593 BSD2.8-3.0 Alpha Step Drill_2.8/3.0 22
4594 BSD2.8-3.2 Alpha Step Drill_2.8/3.2 22
4595 BSD3.2-3.65 Alpha Step Drill_3.2/3.65 22
4596 BSD3.65-4.1 Alpha Step Drill_3.65/4.1 22
4597 BSD4.1-4.5 Alpha Step Drill_4.1/4.5 22

4598 BSD4.5-4.8 Alpha Step Drill_4.5/4.8 22

4599 BSD4.8-5.2 Alpha Step Drill_4.8/5.2 22

4611 MKB Mini Surgical Organizer Box 16
4612 SSK Stopper kit (Provided with 20 stoppers) 20
4672 CS Countersink Drill D2.7-5.9mm 21
4699 OBSA-CS Surgical Kit 16
4712C MDRX1.5 Marking Drill-Sphere shape 1.5/L16 21
4774 MINI KIT Step drills mini kit 16

105
 Ref. No. Code Product Description Page No.

4775 MINI KIT Step drills mini kit without dish 16

4867 AK0.5 AlphaLoC Kit 0.5mm 58
4868 AK1 AlphaLoC Kit 1mm 58
4869 AK2 AlphaLoC Kit 2mm 58
4870 AK3 AlphaLoC Kit 3mm 58
4871 AK4 AlphaLoC Kit 4mm 58
4872 AK5 AlphaLoC Kit 5mm 58
4875 AMPP AlphaLoC Male Processing Package 58, 78, 93
4876 AMSTR AlphaLoC Male-Strong violate units (X4) 58, 78, 93
4877 AMSTA AlphaLoC Male-Standard white units (X4) 58, 78, 93
4878 AMSOF AlphaLoC Male-Soft pink units (X4) 58, 78, 93
4879 AMESO AlphaLoC Male-Extra Soft yellow (X4) 58, 78, 93
4882 AML AlphaLoC Male-Laboratory black units(X4) 58, 79, 93
4883 ABOS AlphaLoC Block Out Spacer 58, 79, 93
4884 AIC AlphaLoC Impression Coping (X4) 58, 79, 93
4885 AFA AlphaLoC Male Analog (X4) 58, 79, 93
4886 AIT AlphaLoC Insertion Tool 58, 79, 93
4887 AET AlphaLoC Extraction Tool 58, 79, 93
4940 DRT 4 Trephine Drill D4.0mm 21
4950 DRT 5 Trephine Drill D5.0mm 21
4951 CCTB-2.5 CAD/CAM TiBase for single tooth restoration on IH implants 57
4952 CCTB-R-2.5 CAD/CAM Titanium Base-R for bar\bridge restoration on IH implants 57
4953 CCTB-CHC-2.5 CAD/CAM TiBase for single tooth restoration on CHC implants 77
4954 CCTB-CHCR2.5 CAD/CAM TiBase for bar\bridge restoration on CHC implants 77
4980 CCTB-IH-SI CAD/CAM Sirona Ti=Base for scan or restoration on IH Implants 57
4982 CCTB-CHC-SI CAD/CAM Sirona Ti=Base for scan or restoration on CHC Implants 77
4984 CCSP-IH-SI CAD/CAM Sirona Scan Post for restoration on IH Implants 57
4985 CCSP-CHC-SI CAD/CAM Sirona Scan Post for restoration on CHC Implants 77
4988 BA-PF-IH CAD/CAM Pre-milled blanks for restoration on IH implants 56
4989 WBA-PF-IH CAD/CAM Pre-milled wide blanks for restoration on IH implants 56
4990 BA-PF-CHC CAD/CAM Pre-milled blanks for restoration on CHC implants 77
4994 S-DM-SR CAD/CAM screw for direct mounting for restoration on TCT-N 56, 76, 91
4995 AN-PM CAD\CAM Analog for printed models for restoration on IH implants 53,56
4996 AN-PM-CHC CAD\CAM Analog for printed models for restoration on CHC implants 76,69
5003 IOSB-TCT-N Dual Use Scan Body for lab 56,76,91
5007 WCCTB CAD/CAM TiBase Wide for restoration on IH implants 57
5008 WCCTB-R CAD/CAM TiBase R Wide for restoration on IH implants 57
5019 SB-IH CAD/CAM Dual-use Scan Body for restoration on IH implants 57
5021 SB-CHC CAD/CAM Dual-use Scan Body for restoration on CHC implants 77
5024 CCTB CAD/CAM Titanium Base for single tooth restoration on IH implants 57
5025 CCTB-R CAD/CAM Titanium Base-R for bar\bridge restoration on IH implants 57
5026 CCTB-CHC CAD/CAM Titanium Base- for single tooth restoration on CHC implants 77
5027 CCTB-CHC-R CAD/CAM Titanium Base for bar\bridge restoration on CHC implants 77
5028 TAC-TCT-N CAD/CAM Adhesive coping TCT-N for single tooth 56,76,91
5029 TAC-TCT-N-R CAD/CAM Adhesive coping TCT-N for bar\bridge 56,76,91
5030 TLA Straight Titanium Abutment 48

106
 PRODUCTS LIST & REF. NO.
Ref. No. Code Product Description Page No.

5031 ETLA Esthetic Straight Titanium Abutment 52

5040 PLA Straight Plastic Abutment Anti Rotation 53
5041 PLA-R Straight Plastic Abutment Rotation 53
5060 HLT Closed Tray Transfer 46
5061 HLTO Open Tray Transfer 47
5062 HLTLS Slim Closed Tray Transfer 47
5080 IA Implant Analog 53
5090 TLA15 Angled Titanium Abutment 15° 49
5091 TLA15B Angled Titanium Abutment 15° with Shoulder 49
5092 TLAL15 Long Angled Titanium Abutment 15° 49
5094 ETLAL15 Esthetic Long Angled Titanium Abutment 15° 52
5098 TLA15BB Long Angled Titanium Abutment 15° with Shoulder 49
5110 RS Retrieval Screw 53, 91
5121 STLAT Torqfit Abutment Screw 53
5122 STLAS Short Titanium Abutment Screw L8.3mm 53
5127 STLASH Titanium Abutment Screw L7.6mm 53
5130 TLA25 Angled Titanium Abutment 25° 49
5131 ETLA25 Esthetic Angled Titanium Abutment 25° 52
5134 TLAL25 Titanium Lock Abutment 25° Long 49
5136 TLA35 Titanium Lock Abutment Angled 35° 49
5140 TLAL Long Straight Titanium Abutment 48
5150 TLAS Slim Straight Titanium Abutment 48
5155 ETLAS Esthetic Slim Long Straight Titanium Abutment 52
5170 HLTS Short Closed Tray Transfer 46
5171 HLTOS Short Open Tray Transfer 47
5182 TLAO2 Omni Titanium Abutment Cuff H2.0mm 49
5200 TLAC-AR Temporary Titanium Abutment Anti Rotation 51
5211 BTT-N Pro Analog for TCT-N 53, 54, 69, 74, 87, 89
5216 TTA-N Pro Temporary Titanium Abutment for TCT-N 54, 74, 89
5217 PST-N-AR Pro Burnout Anti Rotation Sleeve for TCT-N 54, 74, 89
5218 PST-N Pro Burnout Sleeve for TCT-N 54, 74, 89
5220 TLAC-R Temporary Titanium Abutment Rotation 51
5221 TCT0.5-N Pro Tapered Connection Abutment L 0.5mm 54, 55
5222 TCT1.5-N Pro Tapered Connection Abutment L 1.5mm 54, 55
5223 TCT2.5-N Pro Tapered Connection Abutment L 2.5mm 54, 55
5231 TST-N Pro Open Tray Transfer for TCT-N/AUC-TCT-N 54, 74, 89
5235 TS-N Pro Close Tray Transfer for TCT-N/TSA-N abutments 54, 74, 89
5236 HCT4-N Pro Healing Abutment L4mm for TCT-N/AUC-TCT-N 54, 74, 89
5237 HCT6-N Pro Healing Abutment L6mm for TCT-N/AUC-TCT-N 54, 74, 89
5242 TCT-N 0.75 CHC Pro TCT-N L0.75mm abutments for restoration for up to 30° 74, 75
5243 TCT-N 1.5 CHC Pro TCT-N L1.5mm abutments for restoration for up to 30° 74, 75
5244 TCT-N 2.5 CHC Pro TCT-N L2.5mm abutments for restoration for up to 30° 74, 75
5245 TCT-N 3.5 CHC Pro TCT-N L3.5mm abutments for restoration for up to 30° 74, 75
5246 TCT-N 4.5 CHC Pro TCT-N L4.5mm abutments for restoration for up to 30° 74, 75
5247 TCT-N 5.5 CHC Pro TCT-N L5.5mm abutments for restoration for up to 30° 74, 75
5248 TCT-N-R Pro Open Tray Transfer for TCT-N 54, 74, 89

107
 Ref. No. Code Product Description Page No.

5252 TCT3.5-N Pro Tapered Connection Abutment L 3.5mm 54, 55

5253 TCT4.5-N Pro Tapered Connection Abutment L 4.5mm 54, 55
5254 TCT5.5-N Pro Tapered Connection Abutment L 5.5mm 54, 55
5280 IA5 Implant Analog D5.0mm 53
5340 TLAW Wide Straight Titanium Abutment 49
5352 ETLASP1 Simply Esthetic Straight Titanium Abutment H1mm  52
5353 ETLASP2 Simply Esthetic Straight Titanium Abutment H2mm  52
5354 ETLASP3 Simply Esthetic Straight Titanium Abutment H3mm  52
5355 ETLASP4 Simply Esthetic Straight Titanium Abutment H4mm  52
5362 TLAO4 Omni Titanium Abutment Cuff H4.0mm 49
5364 HTLASP Simply Close Tray Plastic Transfer 48, 52, 88
5366 TLASP1 Simply Straight Titanium Abutment Cuff H1.0mm 48
5367 TLASP2 Simply Straight Titanium Abutment Cuff H2.0mm 48
5368 TLASP3 Simply Straight Titanium Abutment Cuff H3.0mm 48
5369 TLASP4 Simply Straight Titanium Abutment Cuff H4.0mm 48
5403 TLASSP Slim Titanium Abutment with Short Platform 48
5410 EAAS15 Short Esthetic Anatomic Abutment 15° 52
5411 EAA15 Esthetic Anatomic Abutment 15° 52
5412 EAAH15 High Esthetic Anatomic Abutment 15° 52
5413 EAAS25 Short Esthetic Anatomic Abutment 25° 52
5414 EAA25 Esthetic Anatomic Abutment 25° 52
5415 EAAH25 High Esthetic Anatomic Abutment 25° 52
5416 TPA 1 Straight temporary PEEK Abutment H 1.0 50
5417 TPA 2 Straight temporary PEEK abutment H 2.0 50
5418 TPA 3 Straight temporary PEEK abutment H 3.0 50
5419 TPA15-1 Temporary PEEK abutment 15° H1.0 50
5420 TPA15-2 Temporary PEEK abutment 15° H 2.0 50
5421 TPA15-3 Temporary PEEK abutment 15° H 3.0 50
5422 TPA25-1 Temporary PEEK abutment 25° H 1.0 50
5423 TPA25-2 Temporary PEEK abutment 25° H 2.0 50
5432 AU 17-1.5 HI Multi Unit Angled abutment 17° 1.5mm for restoration on IH implants 54, 55
5433 AU 17-2.5 HI Multi Unit Angled abutment 17° 2.5mm for restoration on IH implants 54, 55
5434 AU 17-3.5 HI Multi Unit Angled abutment 17° 3.5mm for restoration on IH implants 54, 55
5437 AU 30-1.5 HI Multi Unit Angled abutment 30° 1.5mm for restoration on IH implants 54, 55
5438 AU 30-2.5 HI Multi Unit Angled abutment 30° 2.5mm for restoration on IH implants 54, 55
5439 AU 30-3.5 HI Multi Unit Angled abutment 30° 3.5mm for restoration on IH implants 54, 55
6040 HBC0.5 Hex Base Connection L 0.5mm 55
6041 HBC1.5 Hex Base Connection L 1.5mm 55
6042 HBC2.5 Hex Base Connection L 2.5mm 55
6092 SF-N Fixation Screw SF-N 54,56,74, 76,90,91
6093 SFT-N Fixation Torqfit Screw SFT-N 54,56,74, 76,90,91
6210 TB2 Titanium Ball Abutment L2.0mm 59
6220 TB4 Titanium Ball Abutment L4.0mm 59
6240 H Metal Housing for Ball Attachment 59, 79
6250 NC Standard Nylon Cap 59, 79

108
 PRODUCTS LIST & REF. NO.
Ref. No. Code Product Description Page No.

6251 NCT Nylon Cap with Titanium Ring 59, 79

6253 NCA Soft Nylon Cap 59, 79
6260 TB0.5 Titanium Ball Abutment L 0.5mm 59
6270 TB5 Titanium Ball Abutment L5.0mm 59
6280 TB3 Titanium Ball Abutment L3.0mm 59
6290 TB6 Titanium Ball Abutment L6.0mm 59
6304 TBAA2 Angled Titanium Side Ball Abutment L2.0mm 59
6306 TBAA3 Angled Titanium Side Ball Abutment L3.0mm 59
6405 TLABCC Chrome Cobalt Casting Abutment 53
6406 TLABCC-R Chrome Cobalt Casting Abutment Rotational 53
7301 ITD2.1L-CHC Implant Driver Long 2.1mm CHC 24
7302 ITD2.1S-CHC Implant Driver Short 2.1mm CHC 24
7303 IT2.1LM -CHC Motor Mount Driver Long 2.1mm CHC 24
7304 IT2.1SM -CHC Motor Mount Driver Short 2.1mm CHC 24
7305 ITD2.1-CHC Implant Driver Standard 2.1mm CHC 24
7311 HSD3.4-2-CHC Healing Abutment D3.4 L2 CHC 68
7312 HSD3.4-3-CHC Healing Abutment D3.4 L3 CHC 68
7313 HSD3.4-5-CHC Healing Abutment D3.4 L5 CHC 68
7315 HSD3.8-2-CHC Healing Abutment D3.8 L2 CHC 68
7316 HSD3.8-3-CHC Healing Abutment D3.8 L3 CHC 68
7317 HSD3.8-5-CHC Healing Abutment D3.8 L5 CHC 68
7319 HSD4.2-2-CHC Healing Abutment D4.2 L2 CHC 68
7320 HSD4.2-3-CHC Healing Abutment D4.2 L3 CHC 68
7321 HSD4.2-5-CHC Healing Abutment D4.2 L5 CHC 68
7333 HLTS-CHC Closed Tray Transfer CHC 69
7335 HLTO-CHC Long Open Tray Transfer CHC 69
7338 IA-CHC Implant Analog CHC 69
7345 STLA-CHC Abutment Screw CHC 72
7350 ETLASP1-CHC Esthetic Simply Straight Abutment H1.0mm CHC 70
7351 ETLASP2-CHC Esthetic Simply Straight Abutment H2.0mm CHC 70
7352 ETLASP3 -CHC Esthetic Simply Straight Abutment H3.0mm CHC 70
7353 ETLASP4-CHC Esthetic Simply Straight Abutment H4.0mm CHC 70
7356 ETLAS3.2-CHC Esthetic Standard Slim Abutment D3.2 CHC 70
7357 ETLAS3.6-CHC Esthetic Standard Abutment D3.6 CHC 70
7358 TLAS4.0-CHC Standard Abutment D4.0 CHC 70
7360 ETLA15-CHC Esthetic Angled Titanium Abutment 15° CHC 71
7361 ETLAL15-CHC Esthetic Angled Long Titanium Abutment 15° CHC 71
7362 ETLA25-CHC Esthetic Angled Titanium Abutment 25° CHC 71
7363 EA15-1.5-CHC Esthetic Anatomic 15° Angled Titanium Abutment H1.5mm CHC 71
7364 EA15-2.5-CHC Esthetic Anatomic 15° Angled Titanium Abutment H2.5mm CHC 71
7365 EA15-3.5-CHC Esthetic Anatomic 15° Angled Titanium Abutment H3.5mm CHC 71
7366 EA25-1.5-CHC Esthetic Anatomic 25° Angled Titanium Abutment H1.5mm CHC 71
7367 EA25-2.5-CHC Esthetic Anatomic 25° Angled Titanium Abutment H2.5mm CHC 71
7368 EA25-3.5-CHC Esthetic Anatomic 25° Angled Titanium Abutment H3.5mm CHC 71
7370 ETWASP1-CHC Esthetic Simply Straight Wide Abutments H1.0mm CHC 70

109
 Ref. No. Code Product Description Page No.

7371 ETWASP2-CHC Esthetic Simply Straight Wide Abutments H2.0mm CHC 70

7372 ETWASP3-CHC Esthetic Simply Straight Wide Abutments H3.0mm CHC 70
7373 ETWASP4-CHC Esthetic Simply Straight Wide Abutments H4.0mm CHC 70
7374 ETWASP5-CHC Esthetic Simply Straight Wide Abutments H5.0mm CHC 70
7383 ETLAS4.0-CHC Esthetic Standard Abutment D4.0 CHC 70
7400 RS-CHC Retrieval Screw CHC 72
7403 TB1-CHC Titanium Ball Abutment 2.5mm L 1mm CHC 79
7404 TB2-CHC Titanium Ball Abutment 2.5mm L 2mm CHC 79
7405 TB3-CHC Titanium Ball Abutment 2.5mm L 3mm CHC 79
7406 TB4-CHC Titanium Ball Abutment 2.5mm L 4mm CHC 79
7407 TB5-CHC Titanium Ball Abutment 2.5mm L 5mm CHC 79
7470 AK0.5-CHC AlphaLoC Kit 0.5mm for restoration on CHC implants 78
7471 AK1-CHC AlphaLoC Kit 1mm for restoration on CHC implants 78
7472 AK2-CHC AlphaLoC Kit 2mm for restoration on CHC implants 78
7473 AK3-CHC AlphaLoC Kit 3mm for restoration on CHC implants 78
7474 AK4-CHC AlphaLoC Kit 4mm for restoration on CHC implants 78
7475 AK5-CHC AlphaLoC Kit 5mm for restoration on CHC implants 78
7482 AU 17-1.5 CHC Multi Unit Angled abutment 17° 1.5mm for restoration on CHC implants 74, 75
7483 AU 17-2.5 CHC Multi Unit Angled abutment 17° 2.5mm for restoration on CHC implants 74, 75
7484 AU 17-3.5 CHC Multi Unit Angled abutment 17° 3.5mm for restoration on CHC implants 74, 75
7487 AU 30-1.5 CHC Multi Unit Angled abutment 30° 1.5mm for restoration on CHC implants 74, 75
7488 AU 30-2.5 CHC Multi Unit Angled abutment 30° 2.5mm for restoration on CHC implants 74, 75
7489 AU 30-3.5 CHC Multi Unit Angled abutment 30° 3.5mm for restoration on CHC implants 74, 75
65003 TPS Tissue Punch Small 97
65004 TPL Tissue Punch Large 97
65005 CDS Crestal Drill Small 97
65006 CDL Crestal Dril Large 97
65007 CD2-8 Surgical Drill D2.0mm – L8mm 97
65008 CD2-10 Surgical Drill D2.0mm – L10mm 97
65009 CD2-11.5 Surgical Drill D2.0mm – L11.5mm 97
65010 CD2-13 Surgical Drill D2.0mm – L13mm 97
65011 CD2-16 Surgical Drill D2.0mm – L16mm 97
65012 CD2.8-8 Surgical Drill D2.8mm – L8mm 97
65013 CD2.8-10 Surgical Drill D2.8mm – L10mm 97
65014 CD2.8-11.5 Surgical Drill D2.8mm – L11.5mm 97
65015 CD2.8-13 Surgical Drill D2.8mm – L13mm 97
65016 CD2.8-16 Surgical Drill D2.8mm – L16mm 97
65017 CD3.2-8 Surgical Drill D3.2mm – L8mm 97
65018 CD3.2-10 Surgical Drill D3.2mm – L10mm 97
65019 CD3.2-11.5 Surgical Drill D3.2mm – L11.5mm 97
65020 CD3.2-13 Surgical Drill D3.2mm – L13mm 97
65021 CD3.2-16 Surgical Drill D3.2mm – L16mm 97
65022 CD3.6-8 Surgical Drill D3.6mm – L8mm 97
65023 CD3.6-10 Surgical Drill D3.6mm – L10mm 97
65024 CD3.6-11.5 Surgical Drill D3.6mm – L11.5mm 97
65025 CD3.6-13 Surgical Drill D3.6mm – L13mm 97

110
 PRODUCTS LIST & REF. NO.
Ref. No. Code Product Description Page No.

65026 CD3.6-16 Surgical Drill D3.6mm – L16mm 97

65027 CD4.1-8 Surgical Drill D4.1mm – L8mm 97
65028 CD4.1-10 Surgical Drill D4.1mm – L10mm 97
65029 CD4.1-11.5 Surgical Drill D4.1mm – L11.5mm 97
65030 CD4.1-13 Surgical Drill D4.1mm – L13mm 97
65031 CD4.1-16 Surgical Drill D4.1mm – L16mm 97
65032 CD4.5-8 Surgical Drill D4.5mm – L8mm 97
65033 CD4.5-10 Surgical Drill D4.5mm – L10mm 97
65034 CD4.5-11.5 Surgical Drill D4.5mm – L11.5mm 97
65035 CD4.5-13 Surgical Drill D4.5mm – L13mm 97
65036 CD4.5-16 Surgical Drill D4.5mm – L16mm 97
65037 IMS Implant Mount Small 97
65038 IML Implant Mount Large 97
65039 IMHS Implant Mount Screw 97
65042 IMX Implant mount extention 97
65044 HIA Handpiece Insertion Adapter 97
65045 IME Implant Mount Extractor 97
65047 LP Lateral Pin 97
65048 CPS Crestal Pin Small 97
65049 CPL Crestal Pin Large 97
65050 MCD1.5 Milling Drill D1.5mm 97
65055 IMC Implant Mount CHC 97
65056 IMCS Implant Mount Screw CHC 97
65057 SAD Sleeve L/S Adaptor Driver 97
65058 SLSA Sleeve Adaptor 4.1 97
65058 SLSA Small Sleeve for Adaptor 97
65061 IMCD Implant Mount CHC Driver 97
65062 IMSD Implant Mount Int. Hex Driver Small 97
65063 IMLD Implant Mount Int. Hex Driver Large 97
65064 IMSS Implant Mount CS Small 97
65065 IMSL Implant Mount CS large 97
65070 CD2.4-8 Surgical Drill D2.4mm – L8mm 97
65071 CD2.4-10 Surgical Drill D2.4mm – L10mm 97
65072 CD2.4-11.5 Surgical Drill D2.4mm – L11.5mm 97
65073 CD2.4-13 Surgical Drill D2.4mm – L13mm 97
65074 CD2.4-16 Surgical Drill D2.4mm – L16mm 97
66012 SLS Master Sleeve 4.1 for drilling and implant insertion 96
66012 SLS Small Sleeve for surgical guide 96
66013 SLL Master Sleeve 5.5 for drilling and implant insertion 96
66013 SLL Large Sleeve for surgical guide 96
66014 SLSE Master Sleeve to support lateral pin 96
66014 SLSE Securing Sleeve for surgical guide 96
KIT # 65000 GSTK GSTK kit for IH and CHC 18,96
KIT # 65002 GSTK GSTK kit for CS and CHC 18,96
KIT # 65003 GSTK GSTK kit for CS, CHC and IH 18,96

111
 Our warranty - Your peace of mind

Alpha-Bio Tec's high quality products meet strict international standards.

This is why we can provide you with a Lifetime Warranty for our wide range of implants (not including
provisional implants). In any case of a defect in the implant, implant rejection, fracture or contamination of the
product, subject to filing a complaint report, Alpha-Bio Tec shall replace the defective merchandise.

Warranty: Alpha-Bio Tec warrants that all Implants will be free of defects in materials and/or workmanship.
This warranty applies to the original purchaser only. There are no warranties, express or implied, except this
warranty, which is given in lieu of any other warranties, express or implied, including any implied warranty of
fitness for a particular purpose.

Important - Read instructions before use.

A complaint report is available at Alpha-Bio Tec’s customer service and will be sent upon demand.

Alpha-Bio Tec Warranty

Alpha-Bio Tec continually strives to update and improve its products; hence we reserve the right to modify designs, products and/or techniques
when we feel it is warranted. We also reserve the right to change prices, policies and terms without prior notice. Product availability may vary
between countries. Some products may not be available in the USA.
Warranty: Alpha-Bio Tec makes no warranty, expressed or implied, except that all products will be free of defects in materials and/or
workmanship. This warranty applies to the original purchaser. In the event of a product defect, please notify Alpha-Bio Tec in writing prior to
returning the product.
Alpha-Bio Tec will then, at its discretion, repair, replace or issue a credit for defective merchandise.
The purchaser assumes all risk and liabilities from the use of these products, whether used separately or in conjunction with products not of
Alpha-Bio Tec's manufacture.
Alpha-Bio Tec strongly recommends completion of post-graduate implant education and adherence to all technical procedures and
instructions. Federal law permits the sale of these products to licensed physicians and dental practitioners only. Products in this catalog may
be protected by more than one patent.
Copyright © Alpha-Bio Tec Ltd. All rights reserved. Important - Read instructions before use.

112
113
995-0119 R17 /06.2021

Alpha-Bio Tec's products are cleared for marketing in the USA and are CE-marked in accordance with the Council Directive 93/42/EEC.
Alpha-Bio Tec's complies with EN ISO 13485:2016. Product availability may vary between countries.

www.alpha-bio.net

114