USER

INSTRUCTIONS
DP-DMX4B
Thank you for purchasing the DP-DMX4B by Elation Professional®. For your convenience, this DP-
DMX4B has been tested and is ready to be used, there is no assembly required.

PRODUCT DESCRIPTIONS:
The DP-DMX4B is a 4 channel DMX dimmer pack, it can extend to a maximum of 512 channels
using DMX-512 protocol. The DP-DMX4B features include: zero-crossing circuitry for protection of
inductive loads; 3-prong Edison sockets for each channel; individual 6A fuses for each channel; XLR
connection and a maximum output load of 5A per channel or 20A total.
1
GENERAL FUNCTIONS: DMX Address Table ON MD

(1-10 Switches) 1 2 3 4 5 6 7 8 910

DMX Address Setting

1. Channel Output: 5A per channel, Total 20A 2 START

CH#
1
SWITCHES
ON
1
START
CH#
11
SWITCHES
ON
1,2,4
Switch# 1 2 3 4 5 6 7 8 9 10 3

Off
On
2. Channel LEDs: These LEDs indicate the dim
2 2 12 3,4
3 1,2 13 1,3,4 Switch
1
4 3 14 2,3,4 2

ming, On/Off of the appropriate channels. 5 1,3 15 1,2,3,4

Binary
4
8
16
1 6 2,3 : : 32
64
4
3. DMX Dipswitches: Slide these dipswitces
7 1,2,3 : :
128
8 4 : : 256
Value 512
9 1,4 511 1,2,3,4,5,6,7,8,9

to select desired DMX address (DMX add- 10 2,4 512 10 Address 105

ressing is printed on the top cover of the DP-

DMX4B.)
4. Power LED: The LED is lit when power is on.
2
1 2 3 4

5. DMX LED: This LED begins flashing when a

3
DMX signal is present.
6. Power Switch: Turns the main power on/off.
4
ON MD
POWER DMX
7. Power Input: AC 120V~60Hz, 20A max. INDICATOR
1 2 3 4 5 6 7 8 9 10
INDICATOR

8. DMX Input: This connector accepts your

DMX Address

5
DMX input signals. OUTPUT: 5A/CH, TOTAL 20A MAX

9. DMX Output: This connector sends your 6

DMX signal through to the next DMX device.
This product must not be continuously used DMX DMX
for a long time under 20A total output load IN OUT
SPECIFICATIONS: LOADING FUSE:
(INTERNAL)
F6A 250V 5x20mm
(x4pcs)
2
3
1
1=Ground
2=Data- 1
3
2
POWER
POWER INPUT 3=Data+

Power Input..............AC 120V~60Hz, 20A max. AC120V~ 60Hz,

20A MAX

Channel Output.....................5A/CH., Total 20A

Fuse (Internal)..........6A 250V 5x20mm (x4PCS) 7 CAUTION
RISK OF ELECTRIC
SHOCK DISCONNECT

Dimensions...........................197 x 124 x 60mm

INPUT POWER
BEFORE OPENING
N'OUVREZ PAS..RISQUE DE CHOC ELECTRIQUE MADE IN PRC
WARNING: THIS APPARATUS MUST BE EARTHED 23-020-0121

Weight.........................................2.6Lbs./1.2Kgs
8
9
CAUTION! No user servicable parts inside. Do Not attempt repairs. In the event your unit should fail,
contact Elation Professional® at (323) 582-3322.
WARNING! This product must be earthed. This product is intended for indoor use only. To prevent
fire or shock hazard, do not expose this product to a high temperture or high humidity area.