EDS Management Center Exam
Time allowed for this exam is 60 minutes
The passing score is 75%
2 attempts have been provided for this exam.
Certifications are valid for 12 months from date of completion.
Results
You have reached 14 of 40 point(s), (35%)
Restart Exam View Questions
Monitoring devices that are not SNMP compliant via ICMP provides the ability to do the following:
Collect application information for analytics.
Monitor interface statistics.
Schedule resets on devices.
Alert administrators when connectivity is lost.
Correct
Link Layer Discovery Protocol LLDP is most often used for Topology Map link discovery for the following reasons (Select
all that apply):
It operates on all devices including non-SNMP compliant devices.
It is enabled by default on many vendors’ devices.
It is proprietary to Cisco but considered a standard.
It is almost universally supported.
Incorrect
IGE uses the following search mechanism in its audit tests
Python scripts
Regular expressions (regex)
C++
TCL expressions
Incorrect
ZTP+ can be used against all EOS, EXOS, and Wireless devices.
DHCP Option 68
A DNS “A record”
SNMPv3
An LLDP seed address
Correct
Which of the following is required in order to archive configurations from a typical Cisco device (Select all that apply):
The Cisco switch must be on the same VLAN as Management Center.
A configuration template for the script to execute.
A credential configuration that includes CLI access via telnet or SSH.
A TFTP server.
Incorrect
When uploading information into a floor plan map:
There is no need to define wall thickness, as that information is included in the pdf upload.
Importing multiple maps from Ekahau is a supported functionality.
APs are automatically added based on preconfigured location information.
png, .gif, .pdf, and .jpeg formats are supported.
Incorrect
When creating a floor plan map:
A map must include an Ekahau site survey.
html files can be uploaded and used for maps.
Multiple Areas can be defined which are used to provide differentiated services.
A map must be created from scratch.
Correct
What is a primary requirement for the creation of a custom Alarm triggered on a “private” SNMPTRAP from a 3rd party
network device?
The “public” and “private” MIBs for a 3rd party network device must be imported into MIB Tools.
The “private” MIBs for the 3rd party network device must be imported into the 3rd party device.
The “public” MIBs for the 3rd party network device must be imported into the Extreme Management Center.
The “private” MIBs for the 3rd party network device must be imported into Extreme Management Center.
Incorrect
Within the scripting engine the hash sign (#) signifies the following:
Comment lines.
Execution variables.
Script execution pause.
CLI commands to be executed.
Incorrect
The following are valid license levels for Management Center (Select all that apply):
Advanced
Default
Standard
Base
Incorrect
Management Center Custom Scripting allows administrators to create scripts in the following languages.
Perl and Expect
C++ and Python
Python and TCL
Expect and TCL
Incorrect
Firmware upgrades through Management Center have the following functionality (Choose three):
An upgrade can be performed manually.
An upgrade can be scheduled for a future time.
Devices can be reset after an upgrade.
Failed upgrades can cause a switch to be quarantined.
Correct
Management Center Inventory Management scripts can be created against 3rd party devices to execute the following
actions (Select all that apply):
Configuration archiving.
Scheduled resets of devices
Firmware downloads
Configuration template deployments to new devices.
Incorrect
Topology Maps within Management Center have the following attributes (Choose three):
Connections drawn between devices based on information extracted from device and link discovery protocols
(e.g. LLDP).
Links can be drilled into providing additional information such as link speed, link status, and underlying
discovery protocol.
The Extreme Control Center administrator can arrange the device icons in a logical manner that best
represents the network infrastructure.
Redirecting a link in the map will automatically recreate the configuration on the switches involved.
Correct
There are Management Center upgrade licenses to specifically increase the following:
The number of managed devices and the level of functionality exposed.
The number of administrative users and the number of managed devices.
The number of network clients and the level of functionality exposed.
The number of network clients and the number of administrative users.
Correct
Which of the following is TRUE as pertaining to authorization groups and their privileges (Select all that apply):
Authorization groups provide the ability to grant only the capabilities necessary for specific administrators.
An administrator’s access is dictated by the Filter-id returned from the RADIUS server.
It is best practice for all network managers to use the “root” user to attain full capabilities.
Only three administrative groups are supported by Management Center.
Incorrect
The following statements regarding Management Center’s Archive capabilities are true (Choose two):
An alert icon, (yellow triangle with exclamation mark), is presented within the individual record to indicate if a
specific device backup has failed to execute.
An alert icon, (yellow triangle with exclamation mark), is presented within the individual records to indicate if a
configuration change was detected.
Right-clicking an archived configuration allows an administrator to open a device terminal to the device.
The archive wizard allows administrators to dictate the number of versions of a configuration to save on the
database.
Incorrect
RADIUS server integration requires the following parameters:
Certificate authority hostname Management Center IP address and shared secret.
Active Directory host name, friendly name and shared secret.
Management Center IP address, MAC address and Username.
Management Center IP address, hostname, and shared secret.
Incorrect
IGE supports tests for the following compliance standards (Choose two):
ISO
IEEE
PCI
HIPAA
Incorrect
Zero Touch Provisioning (ZTP+) functions as follows:
DHCP option 198 is used for device management.
Management Center queries devices on the network using JSON.
Devices with ZTP+ enabled report in to Management Center at regular intervals.
SNMPv3 is used to manage all EXOS devices.
Correct
The best practice for the embedded alarms within Management Center is to:
Review the entire list of Alarms to ensure that relevant Alarms for a particular customer are enabled.
Enable email alerting to IT administrators for all Alarms.
Enable all Alarms and verify that each individual alarm has the correct severity level set.
Disable all Alarms except for those reporting hardware failures.
Incorrect
Management Center has the following attributes (Choose two):
Provides a single pane of glass for management of the network infrastructure.
Is accessed via a WEB browser.
Provides WEB based Server Management.
Provides complete management of 3rd-party wireless deployments.
Incorrect
The Connect WEB Service is:
The Analytics interface for Management Center.
An Application Programming Interface embedded into Management Center.
A collection of “private” MIBs from the largest 3rd party vendors.
The main WEB interface for Management Center.
Incorrect
Management Center’s reporting capabilities (Choose two):
Are only available when using ExtremeControl.
Include default Interface level reports including bandwidth utilization.
Allows for the Scheduling of emailed trend reports.
Can only be used when custom FlexViews are enabled.
Correct
The following parameters can be set for any newly created script (Choose two):
The Menus section controls which Management Center screens the script appears on as a right-click option.
The Groups option allows the script to be limited for use by specific user groups.
The Profile option allows a script to be run against devices with a specific SNMP profile.
The Authorization Groups section allows execution control of the script to only the Management Center users
within the assigned group.
Correct
The best practice when enabling historical collection on switch ports is to:
Enable historical collection only on server ports in the data center.
Enable historical collection on all available Ethernet ports to ensure complete coverage for network debugging.
Enable historical collection on all critical ports such as switch uplinks, server interfaces, and wireless AP
connections.
Enable historical collection only on ports involved in network debugging.
Correct
When adding 3rd party devices to Management Center the following details are considered best practices (Select all
that apply):
Rename the device with “Extreme” at the beginning to make it look like the customer only owns Extreme gear.
Configure SNMPv3 support if possible.
Create configuration templates for each 3rd party switch type.
Import private MIBs if possible.
Incorrect
A particular text string from an SNMPTRAP can be matched in a custom Alarm within Extreme Management Center
using the following function:
String Criteria.
Hexadecimal Criteria.
Text Criteria.
Phrase Criteria.
Incorrect
What license factor determines the number of devices that can be managed by Management Center?
The number of unique IP addresses.
The number of unique MAC addresses.
The total number of client MAC addresses.
The total number of unique Ethernet interfaces.
Incorrect
Which of the following statements are true as it pertains to 3rd party devices in Management Center:
Traps are only supported for MIBII information.
Most vendors only release their private MIBs to users with a support contract.
Flexviews are not supported for 3rd party MIBs.
All private MIBs can be queried using MIB Tools.
Correct
ExtremeManagement provides the following primary functions (Choose two):
IP address Management
Oracle Database Management
Inventory Management
Network Management
Incorrect
In order for wireless client location to operate properly (Choose two):
All access points must be configured in Guardian mode.
APs must be set up in a manner that forms a triangle.
Client information must be reported from at least three APs.
The location engine must be enabled.
Incorrect
Custom FlexViews provide the following capability:
The ability to display 3rd party network devices within the Extreme Control Center topology maps.
The ability to poll and display “private” MIBs from a 3rd party network device.
The ability to display Alarms and Events pulled from 3rd party network devices.
The ability to display SNMPTRAPs forwarded from 3rd party network devices.
Incorrect
Which of the following things are true in regards to Zero Touch Provisioning (ZTP+) (Choose two):
ZTP+ provides the ability to scan the network for new switches and add them into the Device Management
tree.
ZTP+ can be used against all EOS, EXOS, and Wireless devices.
Ability to deploy a new or replacement switch into the network with minimal human interaction.
Switches learn the Management Center IP address and automatically register with Management Center.
Incorrect
Launching the “Compare Configuration” function against two archive files shows the following details (Choose two):
Configuration items that are invalid.
Configuration items that have been added.
Configuration items that are unsupported.
Configuration items that have been deleted.
Correct
The Report Designer can be used for the following functions (Choose two):
Customized queries into the ExtremeManagement database.
To bring separately created reports into a single view.
To email reports to relevant users.
To create customized dashboards.
Incorrect
Links between devices can be automatically created on a topology map using the following methods (Select all that
apply):
Extreme Discovery Protocol (EDP).
Link Layer Discovery Protocol (LLDP).
Mac Address Discovery Protocol (MADP).
Node/Alias table.
Incorrect
Which Statements are True in reference to device groups:
Groups can be created based upon 3rd party private MIB information.
Custom Groups are used to categorize devices outside of what is discovered using MIB information.
Custom groups are not supported for 3rd party devices.
A device can only exist in one group.
Correct
The inventory management functionality within Management Center supports configuration backup against this class of
device (Choose two):
Windows Active Directory Servers.
3rd party ping only devices.
Extreme wireless switches.
Extreme wired switches.
Incorrect
Management Center can monitor network devices with the following protocols (Choose two):
BOOTP
HTTP or HTTPS
ICMP or PING
SNMP
Correct
© 2022 Extreme Networks
Home
Courses
Library
Service Provider
Achievements
Achievements
My Belts
My Badges
FAQ
