Scribd
Upload
412 views2 pages

Replacement: - Front Bumper

This document provides instructions for removing and installing the front bumper on a 2004 Toyota Corolla. It lists 14 steps for removal, including taking off the radiator grille sub-assembly, front bumper cover, front bumper energy absorber, front bumper reinforcement, front bumper side mounting brackets, front spoiler sub-assemblies, fog light units, and front bumper hole covers. For installation, it describes reattaching the front bumper reinforcement and radiator grille sub-assembly, noting required torque specifications.

Uploaded by

jeremih alhegn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
412 views2 pages

Replacement: - Front Bumper

This document provides instructions for removing and installing the front bumper on a 2004 Toyota Corolla. It lists 14 steps for removal, including taking off the radiator grille sub-assembly, front bumper cover, front bumper energy absorber, front bumper reinforcement, front bumper side mounting brackets, front spoiler sub-assemblies, fog light units, and front bumper hole covers. For installation, it describes reattaching the front bumper reinforcement and radiator grille sub-assembly, noting required torque specifications.

Uploaded by

jeremih alhegn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

76–2

EXTERIOR/INTERIOR TRIM – FRONT BUMPER


760HY–02

REPLACEMENT
HINT:
Installation is in the reverse order of the removal. But the installation is indicated only when it has a point.

1. REMOVE RADIATOR GRILLE SUB–ASSY


(a) Remove the 2 bolts and clip.
(b) Using a screwdriver, remove the radiator grille.
HINT:
Tape the screwdriver tip before use.

B59104

2. REMOVE FRONT BUMPER COVER


Hook (a) Remove the 6 screws and 2 clips.
(b) Disengage the hook, and remove the front bumper cover.
(c) w/ Fog light:
Disconnect the fog light connectors.
3. REMOVE FRONT BUMPER ENERGY ABSORBER

B59105

4. REMOVE FRONT BUMPER REINFORCEMENT


(a) Disconnect the wire harness clamp.
(b) Remove the 4 nuts and front bumper reinforcement.

B59112

5. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET LH


6. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET RH
7. REMOVE FRONT LH SPOILER SUB–ASSY (W/ FRONT SPOILER)
(a) Remove the screw and 4 retainers.
(b) Disengage the clip and front LH spoiler.
(c) Employ the same manner described above to the other side.
8. REMOVE FRONT RH SPOILER SUB–ASSY (W/ FRONT SPOILER)
9. REMOVE FOG LIGHT UNIT LH (W/ FOG LIGHT)
(a) Remove the nut and fog light unit.
(b) Employ the same manner described above to the other side.
10. REMOVE FOG LIGHT UNIT RH (W/ FOG LIGHT)
11. REMOVE FRONT BUMPER HOLE COVER LH (W/O FOG LIGHT)
12. REMOVE FRONT BUMPER HOLE COVER RH (W/O FOG LIGHT)

2004 COROLLA (RM1037U)

Author: Date: 1857


76–3
EXTERIOR/INTERIOR TRIM – FRONT BUMPER

13. INSTALL FRONT BUMPER REINFORCEMENT


(a) Install the front bumper reinforcement with the 4 nuts.
Torque: 36 N⋅m (367 kgf⋅cm, 27 ft⋅lbf)

B59112

14. INSTALL RADIATOR GRILLE SUB–ASSY


(a) Install the radiator grille with the 2 bolts and clip.
Torque: 5.0 N⋅m (51 kgf⋅cm, 44 in.⋅lbf)

B59244

2004 COROLLA (RM1037U)

Author: Date: 1858

You might also like