Engineered to Order Built to Last G&Ws PATR style transmission terminations are designed for gas insulated substation
and oil immersed equipment applications on extruded dielectric cable systems rated 69kV to 245kV. G&W has been a leading supplier of innovative cable accessory solutions since it was founded in 1905. With installations and sales representation worldwide, G&W continues to offer the latest technology products with world-class, time proven performance. G&W is ISO 9001:2000 registered for its quality systems. G&W offers a wide variety of terminations and joints for all types of cable construction through 500kV.
GIS and Oil Immersed Transformer Terminations
69kV - 245kV
FEATURES
Mechanical shrink stress cone permits fast installation without special tools. Simply position the cone and pull out the plastic core tab. Its that simple. Field proven, time proven reliability, with installations world wide.
Shown with contact pad, aluminum entrance housing and heat shrink seal.
Mechanical shrink stress cone
145kV terminations being prepared for installation in a gas insulated substation
G&W Electric Company 3500 West 127th Street Blue Island, IL USA 60406 708-388-5010 FAX 708-388-0755 Website: [Link] Printed in USA Catalog HVPATR09, July 2009 Page 1
GIS and Oil Immersed Transformer Terminations
69kV - 245kV
For extruded dielectric cables from 240-2500mm (500-5000kcmil).
2
STANDARD COMPONENTS
1) Equipment connection: Contact pad style suitable for GIS or oil immersed transformer applications Stem connector style suitable for oil immersed transformer applications. Various styles of aerial lugs are available for stem connector design. (See page 3) 2) Epoxy insulator with built-in cable shield break 3) Mechanical shrink stress cone 4) Dielectric fluid 5) Connector with double O-ring seal 6) Aluminum base plate 7) Aluminum clamping ring 8) Aluminum entrance housing with heat shrink seal 9) Cable preparation kit includes: grease, sandpaper, PVC tape, heat shrink seal, solder, flux, tinned copper ground braid and grounding lugs.
Optional Corona Shield 1
4
Contact Pad Style
Stem Connector Style
OIL FILLING KIT
Required for filling terminations during installation Kit must be ordered separately Kit can be used to fill multiple terminations. G&W recommends ordering one oil filling kit per six terminations ordered. Supplied with: - Pump - Valves and fittings - Hose (2 meters) - Sight glass
G&W Electric Company 3500 West 127th Street Blue Island, IL USA 60406 708-388-5010 FAX 708-388-0755 Website: [Link] Page 2 Catalog HVPATR09, July 2009 Printed in USA
GIS and Oil Immersed Transformer Terminations
69kV - 245kV
Style 4 Clamp Type Aerial Conductor Size Height Aerial Lug Height Dimension
3 (76mm)
Lug Material
Code
Style 8 NEMA 4-Hole Type
3 (76mm)
mm2 AWG/ inches mm kcmil Bare Copper 35240 #2 500 7 178 Tinned Silver Plated Copper Bare Copper 300- 550 500 1000 7 178 Tinned Silver Plated Copper C1 C1T C1S C2 C2T C2S
8 (203mm)
Code N NT NS
Description Bare Copper Tin Plated Copper Silver Plated Copper
3.38 (86mm)
Connectors
Termination Conductor Material Copper Stem Connector Cable Size mm
2
Cable Entrance Options
kcmil 5000 max 1600 max Connector Style Crimp Crimp Migweld Crimp Crimp Migweld Connector Material and Finish Unplated Copper Tinned Aluminum Unplated Aluminum Silver Plated Copper Silver Plated Aluminum Bi-metallic Description Aluminum entrance housing and heat shrink seal Bronze wiping sleeve Code X
2500 max 800 max
WS
Aluminum Above 800 Above 1600 Copper 2500 max 630 max Aluminum Above 630 Above 1250 5000 max 1250 max
Installation Method
Description Mechanical Shrink Slip On- Use for spares or long term storage. Installation tool is available and is ordered separately Code X S
Contact Pad
Dielectric Fluid Volume Compensating System
Required for proper performance in horizontal or inverted terminations installations Compensates for dielectric fluid expansion and contraction caused by temperature fluctuations Supplied with: - Dielectric fluid reservoir with internal gas bladder - Insulating hose - Optional alarm device to signal accidental loss of dielectric fluid Contact your G&W sales representative for additional information
Catalog Prefix PATR119 PATR140 PATR160 Max Cable Insulation Diameter 93 mm (3.60 in.) 87 mm (3.43 in.) 107 mm (4.20 in.)
Schrader Valve for filling internal Gas Bladder
Pressure Gauge
1/2 Valve Insulating Hose Dielectric fluid reservoir
Approximate Ship Weight 72 kg (160 lbs) 90 kg (200 lbs) 177 kg (390 lbs)
G&W Electric Company 3500 West 127th Street Blue Island, IL USA 60406 708-388-5010 FAX 708-388-0755 Website: [Link] Printed in USA Catalog HVPATR09, July 2009 Page 3
GIS and Oil Immersed Transformer Terminations
69kV - 245kV
CATALOG NUMBER
Use the chart below to build your G&W catalog number. This number should be used for all inquiries and quotation requests. In addition, the following cable information is required to process your order:
1. Conductor size and O.D. of conductor (nominal and max) 2. Insulation O.D. (min and max) 3. Insulation shield O.D. (min and max) 4. Jacket O.D. (nominal and max) 5. Cable construction details with metallic screen type and fault current rating
PATR140 - SF - CS - 630M A - WS - C2 T - X
1 1 2 BIL (kV) 350 650 Code PATR119 PATR140 2 3 4 5 6 3 Code X SF 6 Code C A 7 8 9
System Voltage
Connection Type
Description Stem Connector Contact Pad
per IEC 62271-209, 60859
Corona Shield Option
Description None Corona Shield Code X CS
Rated Rated Voltage Voltage kV (IEC) (kV) IEEE 72.5 138 230 4 69 145 245
1050 PATR160 5
Conductor Size
(Contact G&W for additional cable sizes) Code 240M 300M 400M 500M 630M 800M 1000M 1200M 1400M 1600M 1800M 2000M 2500M Cond. Size kcmil 500 750 1000 1250 1500 1750 2000 2500 3000 5000 Code 500K 750K 1000K 1250K 1500K 1750K 2000K 2500K 3000K 5000K
Conductor Material
Material Copper Aluminum
Entrance Configuration
Description Code X
Cond. Size mm2 240 300 400 500 630 800 1000 1200 1400 1600 1800 2000 2500
Aluminum entrance housing and heat shrink seal
Aerial Lugs
(use only with stem connector) Description No aerial lug Code X
2
Wiping Sleeve for lead sheath, corrugated aluminum, or corrugatWS ed copper cable, Mounting plate with standoff insulators (4) 8
Aerial Lug Finish
Finish None Tinned Silver Code X T S
Clamp, Copper, 240mm max Clamp, Copper, 300mm2 - 500mm2 NEMA 4-hole, Copper
C1 C2 N 9
Installation
Description Code X S
EXAMPLE 1:
PATR140-SF-X-630MA-WS-X-X
Standard - Mechanical Shrink Spares - Slip On
145kV termination with contact pad for 630mm2 aluminum conductor with wiping sleeve, with standard, mechanical shrink installation.
EXAMPLE 2:
PATR140-X-CS-630MC-X-C1S-X
145kV termination with stem connector and corona shield for 630mm2 copper conductor with clamp style, silver plated aerial lug, with standard, mechanical shrink installation.
G&W Electric Company 3500 West 127th Street Blue Island, IL USA 60406 708-388-5010 FAX 708-388-0755 Website: [Link] Page 4 Catalog HVPATR09, July 2009 Printed in USA
