Scribd
Upload
37 views3 pages

Rev 1 Sysscaw - Doc: Ge Medical Systems Probe/Sv Calibration & SNR Tests (10.X Release)

The document outlines calibration and SNR testing procedures for GE Medical Systems' Probe/SV, specifically for the 10.X release. It includes data sheets for Probe-S and Probe-P tuning and SNR measurements, with sections for recording various shim values and machine ratios. Each data sheet is structured to capture specific tuning parameters and signal-to-noise ratios for different probes.

Uploaded by

Rogerio Castro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views3 pages

Rev 1 Sysscaw - Doc: Ge Medical Systems Probe/Sv Calibration & SNR Tests (10.X Release)

The document outlines calibration and SNR testing procedures for GE Medical Systems' Probe/SV, specifically for the 10.X release. It includes data sheets for Probe-S and Probe-P tuning and SNR measurements, with sections for recording various shim values and machine ratios. Each data sheet is structured to capture specific tuning parameters and signal-to-noise ratios for different probes.

Uploaded by

Rogerio Castro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

GE MEDICAL SYSTEMS PROBE/SV CALIBRATION & SNR TESTS (10.

X RELEASE)
REV 1 SYSSCAW.DOC

APPENDIX A — DATA SHEETS

A-1 Probe-S Tuning Data Sheet-for T/S GradMode=

xshim= yshim= zshim=

R1= R2= TG= CF=

(Y-Axis Tuning) (X-Axis Tuning) (Z-Axis Tuning)

ylocA _______________ xlocA _______________ zlocA _______________

ylocC _______________ xlocC _______________ zlocC _______________

ylocB _______________ xlocB _______________ zlocB _______________

ylocD _______________ xlocD _______________ zlocD _______________

yloc- ________________ xloc- ________________ zloc- ________________

yloc+ _______________ xloc+ _______________ zloc+ _______________

deltay_val ___________ deltax_val ___________ deltaz_val ___________

A-2 Probe/P Tuning Data Sheet-for T/S GradMode=

xshim= yshim= zshim=

R1= R2= TG= CF=

(Y-Axis Tuning) (X-Axis Tuning) (Z-Axis Tuning)

ylocA _______________ xlocA _______________ zlocA _______________

ylocC _______________ xlocC _______________ zlocC _______________

ylocB _______________ xlocB _______________ zlocB _______________

ylocD _______________ xlocD _______________ zlocD _______________

yloc- ________________ xloc- ________________ zloc- ________________

yloc+ _______________ xloc+ _______________ zloc+ _______________

deltay_val ___________ deltax_val ___________ deltaz_val ___________


20 SETUP & CALIBRATION
GE MEDICAL SYSTEMS PROBE/SV CALIBRATION & SNR TESTS (10.X RELEASE)
REV 1 SYSSCAW.DOC

A-3 Probe-S SNR Data Sheet GradMode=

Record:
X __________, Y ____________, Z ___________ Shim Values.
R1 __________, R2 ____________, TG ___________, AX _____________
FWHM: (phantoms = 2 Hz) , WS Ang: ________ Degrees, WS: _________ %
MACHINE # RATIO

NA ___________ ___________
Cr ___________ ___REF____
Ch ___________ ___________
m1 ___________ ___________
H2O ___________ ___________

RMS Noise Cr SNR


__________ ___________
A-4 Probe-S SNR Data Sheet GradMode=

Record:
X __________, Y ____________, Z ___________ Shim Values.
R1 __________, R2 ____________, TG ___________, AX _____________
FWHM: (phantoms = 2 Hz) , WS Ang: ________ Degrees, WS: _________ %
MACHINE # RATIO

NA ___________ ___________
Cr ___________ ___REF____
Ch ___________ ___________
m1 ___________ ___________
H2O ___________ ___________

RMS Noise Cr SNR


__________ ___________
A-5 Probe-S SNR Data Sheet GradMode=

Record:
X __________, Y ____________, Z ___________ Shim Values.
R1 __________, R2 ____________, TG ___________, AX _____________
FWHM: (phantoms = 2 Hz) , WS Ang: ________ Degrees, WS: ________ %
MACHINE # RATIO

NA ___________ ___________
Cr ___________ ___REF____
Ch ___________ ___________
m1 ___________ ___________
H2O ___________ ___________

RMS Noise Cr SNR


__________ ___________

21 SETUP & CALIBRATION


GE MEDICAL SYSTEMS PROBE/SV CALIBRATION & SNR TESTS (10.X RELEASE)
REV 1 SYSSCAW.DOC

A-6 Probe-P SNR Data Sheet GradMode=

Record:
X __________, Y ____________, Z ___________ Shim Values.
R1 __________, R2 ____________, TG ___________, AX _____________
FWHM: (phantoms = 2 Hz) , WS Ang: ________ Degrees, WS: _________ %
MACHINE # RATIO

NA ___________ ___________
Cr ___________ ___REF____
Ch ___________ ___________
m1 ___________ ___________
H2O ___________ ___________

RMS Noise Cr SNR


__________ ___________
A-7 Probe-P SNR Data Sheet GradMode=

Record:
X __________, Y ____________, Z ___________ Shim Values.
R1 __________, R2 ____________, TG ___________, AX _____________
FWHM: (phantoms = 2 Hz) , WS Ang: ________ Degrees, WS: _________ %
MACHINE # RATIO

NA ___________ ___________
Cr ___________ ___REF____
Ch ___________ ___________
m1 ___________ ___________
H2O ___________ ___________

RMS Noise Cr SNR


__________ ___________
A-8 Probe-P SNR Data Sheet GradMode=

Record:
X __________, Y ____________, Z ___________ Shim Values.
R1 __________, R2 ____________, TG ___________, AX _____________
FWHM: (phantoms = 2 Hz) , WS Ang: ________ Degrees, WS: ________ %
MACHINE # RATIO

NA ___________ ___________
Cr ___________ ___REF____
Ch ___________ ___________
m1 ___________ ___________
H2O ___________ ___________

RMS Noise Cr SNR


__________ ___________

22 SETUP & CALIBRATION

You might also like