Scribd
Upload
155 views2 pages

Yoke Sample

PT.Fareast Calibration and Testing Services calibrated an AC counter probe (yoke) and issued a certificate of calibration. The calibration was performed according to ISO and ISO/IEC standards and traceable to SI units. The instrument was found to lift 4.56 kg correctly according to the in-house calibration procedure. The certificate documents the calibration results and provides details on reference standards used and measurement uncertainties.

Uploaded by

AAMIR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
155 views2 pages

Yoke Sample

PT.Fareast Calibration and Testing Services calibrated an AC counter probe (yoke) and issued a certificate of calibration. The calibration was performed according to ISO and ISO/IEC standards and traceable to SI units. The instrument was found to lift 4.56 kg correctly according to the in-house calibration procedure. The certificate documents the calibration results and provides details on reference standards used and measurement uncertainties.

Uploaded by

AAMIR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

PT.

FAREAST CALIBRATION AND TESTING SERVICES


Tiban Raya Lestari, C/4 Sekupang, Batam, Indonesia
Tel:+62(778)351831|Email:sales@[Link]
[Link]
ISO 9001:2015 ISO/IEC 17025:2017Accredited Lab

Certificate of Calibration
Certificate No:- Job No:
Date Received : 10-Jun-21 Issue Date: 14-Jun-21
Instrument : AC Countor Probe (Yoke) Tag / ID No: -
Manufacturer: Parker Date Calibrated: 14-Jun-21
Model: B310S Recommended Due Date: 14-Jun-22
Serial No: 12950 Ambient Temperature: 54%
Weight Lift 10.06 lb / 4.56 kg Relative Humidity: 23c
Status: As found Page: 1 of 2

Customer :
Address :

The describe instrument has been calibrated by [Link] calibration and testing services .[Link]
calibration and testing servies practices are in compliance with ISO 9001:2015 & ISO 17025:2017.

The certificate provides traceability of measurment to the international system of Units(SI) and/or to units of
measurement realised at the National Metrology Centre (NMC) Indonesia or other recognized national
metrology institutes.

Method of Calibration:
The calibration method was carried out according to in-house technical calibration procedure FEC-CP-0015 .

Reference Standard Used for Calibration:


1- Weight Lift Test Bar Serial No: 838794 Due Date 22-Oct-21
Comments:
1-The result of calibration are given on the attached calibration data sheets.
2-The expended uncertainty of measurement associated with the calibration is estimated of a confidence
approximately 95% with coverage factor of K=2.00.
3-The user should determine the suitability of the instrument for its intended use.
4-The calibration was performed at an ambient temperature stated on above and did not fluctuate by more
than +/- 1 during meaurement series.

Calibrated by: Approved by:

________________ ________________
Tony Rachmadi Muhammad Aamir

This certificate may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
[Link] CALIBRATION AND TESTING SERVICES
Tiban Raya Lestari, C/4 Sekupang, Batam, Indonesia
Tel:+62(778)351831|Email:sales@[Link]
[Link]
ISO 9001:2015 ISO/IEC 17025:2017Accredited Lab

Certificate No:- 0 Job No: 0


Date Received : 10-Jun-21 Issue Date: 14-Jun-21
Page No: 2 of 2

Calibration Result of Weight Lifting Test :

Weight Lift Test Bar (kg) Results

4.56 Pass

"END OF RESULTS"

This certificate may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

You might also like