•• PROTECTED 関係者外秘

A big thank you to Mr. Andrej Škof from Toyota Adria for realising this document.

Print screens shown are created using GTS+ version 2022.04.001

1
 •• PROTECTED 関係者外秘

Table of Content

Contents
Table of Content ........................................................................................................................................... 2
Installation .................................................................................................................................................... 4
Step 0: System Requirements ................................................................................................................... 4
Step 1: Installation .................................................................................................................................... 4
Step 2: Restart the PC!............................................................................................................................. 4
Log in, Log Out and User Change .................................................................................................................. 5
Login .......................................................................................................................................................... 5
Start ....................................................................................................................................................... 5
EULA ...................................................................................................................................................... 5
Login Screen .......................................................................................................................................... 5
Main Menu............................................................................................................................................ 6
User Settings ......................................................................................................................................... 6
PC Settings ............................................................................................................................................ 7
Setup completion .................................................................................................................................. 8
Logout and Close....................................................................................................................................... 9
User switching ........................................................................................................................................... 9
Preparation for work................................................................................................................................... 11
Overview ................................................................................................................................................. 11
VIMs and drivers ..................................................................................................................................... 11
Vehicle Connection ..................................................................................................................................... 13
Operations .......................................................................................................................................... 14
Description of Operations ........................................................................................................................... 15
Health Check ........................................................................................................................................... 15
Health Check Start .................................................................................................................................. 15
Health Check Result screen................................................................................................................. 17
Minimized view ................................................................................................................................... 19
Stored Data ......................................................................................................................................... 20
System Select .......................................................................................................................................... 21
System Select Start ................................................................................................................................. 21
Screen before Health Check is done (ECU status unknown) .............................................................. 22

2
 •• PROTECTED 関係者外秘

Graphing ............................................................................................................................................. 26
Snapshot ............................................................................................................................................. 27
Selecting the Trigger Conditions ......................................................................................................... 28
Graphing.................................................................................................................................................. 30
Text Search in Data list........................................................................................................................ 35
Active test ........................................................................................................................................... 36
Utility ................................................................................................................................................... 36
CAN Bus Check.................................................................................................................................... 37
Starting the CAN Bus Check ................................................................................................................ 37
Stored Data ............................................................................................................................................. 41
Accessing Stored Data......................................................................................................................... 41
Customize................................................................................................................................................ 42
Starting the Customize operation ....................................................................................................... 42
Vehicle Control History ........................................................................................................................... 44
Starting the operation......................................................................................................................... 44
Functions on the right side ......................................................................................................................... 45
History ..................................................................................................................................................... 45
Link to other systems .............................................................................................................................. 46
SI Main page........................................................................................................................................ 46
GTS+ New Features list ....................................................................................................................... 46
Other functions on main display ................................................................................................................. 47
GTS+ Settings .......................................................................................................................................... 47
User Configuration .................................................................................................................................. 47
Advanced Function ................................................................................................................................. 48
Open Scan Data file ................................................................................................................................. 48
Operations database ........................................................................................................................... 49
Offline Mode ............................................................................................................................................... 51
OFFLINE Mode after Expiration Date .......................................................................................................... 53
File Locations............................................................................................................................................... 54
Convert TSE file to GTS files ........................................................................................................................ 55
CUW+ Reflash Operation ............................................................................................................................ 57
Uninstall GTS+ ............................................................................................................................................. 59

3
 •• PROTECTED 関係者外秘

Installation

Step 0: System Requirements

Verify that your PC is compatible with the requirements of the GTS+ software:

1. Your PC respects or exceeds these hardware specifications:

2. Minimum I3 processor or better
3. At least 5 Gb of disk space, recommended: 10 Gb or more
4. At least 4Gb of RAM memory, recommended: 8 Gb of RAM or more

5. Windows 10 (64bits) operating system (older operating systems are not supported, neither is
Windows 11 for the moment)
6. Your PC has installed .NET 4.7.2
7. Your PC has installed one of the 3 supported browsers listed below:
8. Chrome (minimum version 107.0)
9. Edge (minimum version 107.0)
10. Firefox (minimum version 80.0)

11. You have Admin rights on your PC- the installer needs such permissions.

12. Your PC has a good connection to the internet (we recommend at least 10 Mb/s, but 100 Mb/s
will be optimal)
13. Your network firewall allows access to *.[Link] domain

14. You have a vehicle interface cable that is supported (old Denso VIM is NOT supported and you
can find below details of supported interface cables)

Step 1: Installation
1. Download and extract the installer package
2. Double click on the [Link] to start the installation.
3. Follow-up the guidance of the screens presents during the installation process.

Step 2: Restart the PC!

The restart of the PC after the end of the installation process is mandatory otherwise components
of the newly installed software are not fully operational and you will encounter errors.

4
 •• PROTECTED 関係者外秘

Log in, Log Out and User Change

Login

Start
Double-click the icon on the desktop to start GTS+:

EULA
You will see this screen:

(This appears only the first time after installation or when the EULA is updated.)

If you agree with the description,

(1) Check "I accept all the terms in the license agreement ",
(2) Click “Next”.

Login Screen
Once you have agreed to the EULA, The GTS+ login screen appears:

Follow the steps below to start the login process:

5
 •• PROTECTED 関係者外秘

1. Select a region/ user type from the pull-down menu

2. Select AUTHORIZED REPAIRER
3. Click on “Server Login”.

To log in, use the same credentials you use for Techdoc.

Main Menu
Once login is complete, you will see the Main Menu screen:

User Settings
If you log in for the first time ever to any GTS+ PC, you will see the “User Settings” screen:

6
 •• PROTECTED 関係者外秘

You can adjust your preferences and save them by clicking on the “Next” button (right-pointing arrow).
This user setup must be done once only, after which the settings will be saved in an online database. If
you log in to another GTS+ PC, you will automatically load in your settings.

You can always change your profile settings in “User Configuration” in the Main Menu.

PC Settings
The first user to log in to GTS+ will also see the “PC Settings” page:

7
 •• PROTECTED 関係者外秘

These settings will store the dealer/workshop details as well as the VIM configuration. This needs to
happen once after installation. You can save the settings by clicking on the “Next” button.

You can change settings by clicking on “GTS+ Settings” in the Main Menu.

Setup completion
Once you have saved all settings, you will be returned to the Main Menu.

8
 •• PROTECTED 関係者外秘

Logout and Close

When clicking the "x" button (close) in the browser to exit the software, the user is automatically logged
out and GTS+ is closed

User switching
To switch users, exit the software, restart GTS+ and log-in as the new user.

Click on the triangle next to your user ID and Logout will be displayed. Clicking on Logout will lead you
back to the Login screen.

9
•• PROTECTED 関係者外秘

10
 •• PROTECTED 関係者外秘

Preparation for work

Overview
Prepare the following to connect the GTS+ to the vehicle.
1. PC with GTS+ installed
2. Vehicle Interface Module
3. DLC3 cable
4. USB cable (dedicated for each VIM)

VIMs and drivers

Mongoose PlusMFC3 Mongoose Pro TS2+/MongooseProMF
TD TS-3 ETH
BT MFC2BT C2

All drivers are available in Techdoc

In TechDoc, search for GTS Orders → GTS Software (you will be redirected to the downloads page) →
Download/File download → File Type: Drivers (Use 64-BIT drivers only for Mongoose)

11
•• PROTECTED 関係者外秘

12
 •• PROTECTED 関係者外秘

Vehicle Connection

Once you have logged in successfully, you will be ready to connect to the vehicle.

In order to start the connection process, click on “Connect to Vehicle”

You will see the connection in progress screen:

Once basic information is retrieved, you will see the option selection screen:

13
 •• PROTECTED 関係者外秘

Please note that this is not always the case! You may be directly connected to the vehicle.
Once you have selected an option in the dropdown menu, press

After selecting options, wait to for GTS+ to complete the connection:

Once connection is established, you will see the “Main Menu” screen.

You can always reach this screen by clicking on the button with three lines ( top left of the screen) and
selecting “Main Menu”:

Operations
From this menu, you can choose to execute the following operations:

1. Health Check
2. System select
3. Can bus check
4. Stored data
5. Customize
6. ECU security key (not applicable to all vehicles)
7. Send vehicle information (not applicable to all vehicles)
8. Vehicle control history

14
 •• PROTECTED 関係者外秘

Description of Operations
Health Check

Health Check Start

Health Check checks all ECU units on the vehicle for DTC Codes, RoB codes, Calibration information and
more:

Please note that you can already check DTC details while Health Check is still in progress!

15
 •• PROTECTED 関係者外秘

At the bottom right corner of the screen, you can find additional operations:

From left to right, these are:

1. Software as a part (“Blank ECU”)

2. Clear all DTCs
3. Refresh health check
4. Time stamp
5. ECU Security Key (not applicable in this case)

You will be asked to collect additional data. You can accept or reject.

16
 •• PROTECTED 関係者外秘

Health Check Result screen

Once the Health Check is complete, you will see the result screen in real-time. You can open Freeze
Frame Details (FFD) by clicking on eh snowflake icon under the “FFD” column in any ECU with DTCs:

17
 •• PROTECTED 関係者外秘

This is what the FFD screen looks like:

You can ”fold” or “unfold” all details by clicking on the “+” or “-” buttons on the left top corner of the
Health Check Result page:

18
 •• PROTECTED 関係者外秘

Minimized view

19
 •• PROTECTED 関係者外秘

Stored Data

20
 •• PROTECTED 関係者外秘

System Select

System Select Start

System Select opens the details of the specific ECU you want to retrieve information from. When you click
on the icon, you will land on the screen with an overview of all ECU.

Screen after a Health Check is done (ECU status known)

21
 •• PROTECTED 関係者外秘

Screen before Health Check is done (ECU status unknown)

Clicking on will provide more information about the ECU:

22
 •• PROTECTED 関係者外秘

Opening a system always opens the DTC screen first. You can switch between different operations for a
specific ECU (DTC Check, Data List, Active Test, Utility, Dual Data List)

Bottom right of the screen, you can find additional options.

From left to right, these are:

1. View monitors
2. Clear DTC
3. SAVE (saves details to the TSE file)

Wire monitors screen:

23
 •• PROTECTED 関係者外秘

To go back to the previous system select screen, click on the back arrow:
If you choose Clear DTC , you will receive a warning. You can store data, clear data or cancel the
operation.

Data list

24
 •• PROTECTED 関係者外秘

You can filter data by clicking on the dropdown menu (bottom-left corner):

You can also highlight specific parameters by selecting them first:

And then clicking on “Sort by selection” button:

25
 •• PROTECTED 関係者外秘

Graphing
Data list graphing can display up to 8 items (two in one graph)

26
 •• PROTECTED 関係者外秘

Options on the right side for every graph that you open:

From left to right, these are:

Full Screen mode

Graph change
Graph setting
Close

Snapshot
You can perform a snapshot by configuring, recording and saving it as shown below:

27
 •• PROTECTED 関係者外秘

1.

2.

3.

4.

When the Snapshot is finished, you can add a Memo future information (example: “Engine start”), then
press YES so the data will be saved

Selecting the Trigger Conditions

Default trigger conditions are stored when you launch the application for the first time. If you want to
change the Trigger conditions while reading Data List, press the and configure the settings. Press

28
 •• PROTECTED 関係者外秘

OK to save.

29
 •• PROTECTED 関係者外秘

Graphing
You can directly start a Graph by clicking on the graph button at the bottom of the screen.

By default, you will see both data list and graph on the screen. You can change this to show the graph
only by clicking on .
If you want to have data list active again, click on

30
 •• PROTECTED 関係者外秘

Hovering your mouse on the coloured line in the graph will show the name of the parameter/sensor.

You can also open Graph directly without selecting any parameters by clicking on .

31
 •• PROTECTED 関係者外秘

Doing so will start a blank screen with all the available parameters of the ECU on the left:

Click and hold the parameter on the left, then drag it into the blank area to add it to the graph options

32
 •• PROTECTED 関係者外秘

You can filter specific parameters by first clicking on the parameters, then using NEW LIST .
Data will be shown at a higher refresh rate this way.

If you want to remove parameters from the list, then first select those parameters and click on .

33
 •• PROTECTED 関係者外秘

34
 •• PROTECTED 関係者外秘

Data manager adds parameters to the list

First click on the parameter you wish to add, then click on to add it to the custom list.
To remove parameters from the custom list, select it from the list and click on .

To add or remove all parameters directly, you can use the double arrows:

Text Search in Data list

You can search for specific parameters by typing a keyword in Text Search:

35
 •• PROTECTED 関係者外秘

Active test
You can use Active Test for further inspections.
On the right side of the screen, you will see the respective description for the operation highlighted on the
left side of the screen.

Below is an example for EGR valve activation:

Utility
Just like Active Test, you can use utilities for further investigations:

36
 •• PROTECTED 関係者外秘

CAN Bus Check

Starting the CAN Bus Check

Clicking on this button will start the CAN communication check on the car:

37
•• PROTECTED 関係者外秘

38
•• PROTECTED 関係者外秘

39
•• PROTECTED 関係者外秘

40
 •• PROTECTED 関係者外秘

Stored Data

Accessing Stored Data

Clicking on this button gives you access to the information stored for this vehicle.

41
 •• PROTECTED 関係者外秘

Customize

Starting the Customize operation

Clicking on this button will enable the user to change some customization options on the vehicle:

42
 •• PROTECTED 関係者外秘

43
 •• PROTECTED 関係者外秘

Vehicle Control History

Starting the operation

Clicking on this button gives the user an overview on what happened with the car or what the customer
did:

44
 •• PROTECTED 関係者外秘

Functions on the right side

In the Main Menu, you can find additional functions on the top right of the screen:

From left to right, those are:

1. History
2. Link to the others system
3. Help

History
In History, the system will show which systems which you have previously selected (e.g.: Engine, Land
Control, Air conditioner, SRS Airbag). If you click on any of them, the list will be opened again

45
 •• PROTECTED 関係者外秘

Link to other systems

SI Main page
This link will bring you to Techdoc (you will need to login again)

GTS+ New Features list

For now, not in operation.

46
 •• PROTECTED 関係者外秘

Other functions on main display

GTS+ Settings
Allows you to modify the settings of the PC (Dealer address, e-mail address, VIM selection, etc.). These
changes will be used by all users on this PC.

You can save the new settings by clicking on: in the bottom right.

User Configuration
This allows you to change your preferences. These changes are for the user profile only. Any new
modification will also be saved to the online database so users can download their settings on other PCs.

47
 •• PROTECTED 関係者外秘

You can save the new settings by clicking on: in the bottom right.

Advanced Function
Allows you to execute advanced functionalities on the vehicle (e.g: Navigation Unlock, etc.)

To go back press

Open Scan Data file

Allows you to open .gTSE files (new versions of TSE files) in GTS+.

Click on the file that you want to open and press OK

48
 •• PROTECTED 関係者外秘

An additional window will open.

Operations database
Within the .gTSE file, you can see what operations have been performed on this vehicle (saved into the
.gTSE file). To access this data, you can click on (top left of the screen).

49
 •• PROTECTED 関係者外秘

Doing so will open the activity report:

50
 •• PROTECTED 関係者外秘

Offline Mode

GTS+ allows users to use the software in “Offline” mode for a limited time after their last login (max: 2
days).

Starting GTS+ with the Wi-Fi turned off will lead you to the screen below, where all profiles are stored.
To create a profile on this PC, log in to this PC with your account:

Selecting the profile will prompt a warning – please be aware that maximum offline usage is of 2 days!

Clicking on OK will lead you to the Main Menu, where you can start working on the vehicle. Please note
that ONLINE operations will not be available! (ECU MAC Key Pairing operation, Reprogramming Unlock
Seed generation, etc.)

51
•• PROTECTED 関係者外秘

52
 •• PROTECTED 関係者外秘

OFFLINE Mode after Expiration Date

If you try to use offline mode after 2 days, you will receive an error message:

To fix this problem, the user must log in using online mode again.

53
 •• PROTECTED 関係者外秘

File Locations

C:\Users\Public\Documents\GTSPlus\UserData

A desktop shortcut is created once GTS+ is installed:

54
 •• PROTECTED 関係者外秘

Convert TSE file to GTS files

Click on the START menu then input the following text TSE Converter, after that click Open

A new window will be opened

55
 •• PROTECTED 関係者外秘

Drag and drop the TSE file that you want to convert to the GTSE file

When the file is converted you will get a success message

You can send the file using e-mails /help desk

You can open the file by double-clicking on it.

56
 •• PROTECTED 関係者外秘

CUW+ Reflash Operation

Double-click the .cuw file to start the process.

You will have the option to use GTS or GTS+.

If you choose GTS+, you can follow the process step-by-step.

57
•• PROTECTED 関係者外秘

58
 •• PROTECTED 関係者外秘

Uninstall GTS+
You can uninstall GTS+ by following this process:

Click on the START menu , then input the following text ”Add or remove programs” and click Open

The user can also access “Apps and Features” directly by right clicking the windows button:

59
 •• PROTECTED 関係者外秘

1. Right-Click on Windows button

2. Click on “Apps and Features”

60
 •• PROTECTED 関係者外秘

3. Search for “GTSPlus”

4. Click on “GTSPlus”

61
 •• PROTECTED 関係者外秘

5. Click on Uninstall

6. Follow the uninstallation process.

62