Industrial Rack-Mount Ethernet Switch
Industrial Rack-Mount Ethernet Switch
0a / Jun, 2017
RGS-PR9000 Series
Ethernet Switch
Industrial
RGS-PR9000 Series
Media Converter
Industrial
Features
▪ Designed for power substation / Railway application and fully compliant
with the requirement of IEC 61850-3 and IEEE 1613
▪ Modular designed makes network planning easy
▪ Supports Layer 3 static routing, RIP and VRRP function
▪ Supports O-Ring (recovery time < 30ms) and MSTP (RSTP/STP compatible)
Device Server
Industrial
for Ethernet Redundancy
▪ O-Chain allow multiple redundant network rings
▪ Supports standard IEC 62439-2 MRP *NOTE 1 (Media Redundancy Protocol)
function
▪ Supports IEEE 1588v2 clock Synchronization
▪ Supports IPV6 new internet protocol version
Access Point
Industrial Wireless
▪ Supports Modbus TCP protocol
▪ VLAN unaware : Supports priority-tagged frames to be received by specific
IEDs
▪ Provided HTTPS/SSH protocol to enhance network security
▪ Supports IEEE 802.3az Energy-Efficient Ethernet technology
▪ Supports SMTP client and SNTP server protocol
▪ Supports application-based QoS management
VPN Router
Industrial Cellular
▪ Supports Device Binding security function
▪ Supports DOS/DDOS auto prevention
▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
▪ Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
▪ Supports port mirror function to monitor port data
▪ Support ACL and 802.1x User Authentication for security
▪ Supports 10K Bytes Jumbo Frame
Industrial
M2M Gateway
▪ Multiple notification for warning of unexpected event
▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision)
configuration
▪ Support LLDP Protocol Full Gigabit O-Ring
Introduction
RGS-PR9000 is Layer-3 modular managed redundant ring Ethernet switch with 4 slots. The switch is designed for power substation application and rolling
stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. With completely support of Ethernet Redundancy protocol, O-Ring
Management Software
Network
(recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions
or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40oC to 85oC (If use 10G SFP module then
operating temperature is -20 oC ~ 60oC). RGS-PR9000 can also be managed centralized and convenient by Open-Vision, as well as the Web-based
interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation
and rolling stock application.
▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring redundant
ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology.
▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone
network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust
compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-effectiveness
in one set of network redundancy topology.
▪ MRP*NOTE 1 : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to
overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol.
1 ▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according to
TCP/UDP port number.
▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. Hacker
Industrial Ethernet Switch
cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and
controllers.
▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short
time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS attack
immediately and completely.
▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks.
▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards
that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or more.
▪ IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for protection and control applications.
▪ Modular Designed : Modular designed can makes network planning easy and allow greater flexibility by letting you install other Ethernet/Optical fiber
modular.
PLC
O-Ring
Control Center
IGS-7084GCP
Control Center
IGPS-1041GTPA
PLC
SCADA
SCADA IDS-5042
Power Generation
Distribution
Open-Vision
Ethernet Switch
Industrial
ORing’s switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for
user to manage and monitor all of industrial Ethernet switches on the industrial network.
Media Converter
Industrial
Device Server
Industrial
Commander Host Monitor
Access Point
Industrial Wireless
VPN Router
Industrial Cellular
Topology View
Dimensions
Industrial
M2M Gateway
Accessories
(Unit=mm)
Management Software
Network
Specifications
1
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
Industrial Ethernet Switch
Ethernet Standards IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 32k
Packet Buffer 32Mbits
Flash Memory 128Mbits
DRAM Size 1Gbits
Jumbo frame Up to 10K Bytes
Priority Queues 8
Processing Store-and-Forward
Switching latency: 7 us
Switching bandwidth: 128Gbps
Max. Number of Available VLANs: 4095
Switch Properties VLAN ID range: VID 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
MAC-based authentication (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Security Features Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
IP source guard
Hardware routing, RIP and static routing
IEEE 1588v2 clock synchronization
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
Guest VLAN
Software Features GVRP
IGMP v2/v3 Snooping
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
Modbus TCP
SMTP Client
SNTP server
Firmware upgrade and configuration backup and restore
O-Chain
MRP*NOTE 1
Network Redundancy MSTP (RSTP/STP compatible)
ERPS
RS-232 Serial Console Port RS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1
*NOTE 1: This function is available by request only
LED Indicators
Ethernet Switch
Industrial
System Ready Indicator (PWR) Green : Indicates that the system ready. The LED is blinking when the system is upgrading firmware
Power Indicator (PWR1 / PWR2) Green : Power LED x 2
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
Green : Indicates that the system operating in O-Ring mode
O-Ring Indicator (Ring) Green Blinking : Indicates that the Ring is broken
Fault Indicator (Fault) Amber : Indicate unexpected event occurred
Media Converter
Industrial
Reset To Default Running Indicator (DEF) Green : System resets to default configuration
Supervisor Login Indicator (RMT) Green : System is accessed remotely
Link/Act(LINK) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
Mode select Button (MODE) : Link/Act(LINK) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button
Smart LED Display system Port 1 ~ 28 Link/Act(LK/ACT) LED show : Green x 28
Port 1 ~ 28 SPD: Green for 1000Mbps, Amber for 10/100Mbps
Port 1 ~ 28 FDX: Green for Full Duplex; Amber for Half Duplex
Fault Contact
Relay
Device Server
Industrial
Relay output to carry capacity of 1A at 24VDC
Power
Dual 24/48VDC (24~72VDC) power inputs at Dual 24/48VDC (24~72VDC) power inputs at terminal Dual 100~240VAC / 100~370VDC power inputs at terminal
terminal block Note2 block *NOTE 2 block
46Watts max. 46Watts max. 43.5Watts max.
Present Present
Physical Characteristic
Access Point
Industrial Wireless
19 inches rack mountable
Enclosure
IP-30
Weight (g) 6,450g 6,600g
Dimension (W x D x H) 440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inch)
Environmental
Storage Temperature -40 to 85oC (-40 to 185oF)
VPN Router
Industrial Cellular
SFP+ module absent : -40 to 75oC
24VDC~36VDC 10G 10G SFP+ module used: -20 to 50 oC 10G SFP+ module absent : -40 to 85oC
Operating Temperature o
SFP+ module absent : -40 to 85oC 10G SFP+ module used: -20 to 60 C
36VDC~72VDC 10G 10G SFP+ module used: -20 to 60 oC
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EN 55022, EN 55024 (CE EMC), EN 50121-4, FCC, EN 50121-3-2 (EN50155), EN 61000-6-2,
EMC EN 61000-6-4, IEC 61000-3-2, IEC 61000-3-3
Industrial
M2M Gateway
EMI CISPR 22, EN 55011, FCC Part 15B Class A
IEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-
EMS 4-8 (PFMF), IEC 61000-4-11 (DIP)
Shock IEC 60068-2-27, IEC 61373 (EN50155)
Free Fall IEC 60068-2-31 (IEC 60068-2-32)
Vibration IEC 60068-2-6, IEC 60068-2-64, IEC 61373 (EN50155)
Safety IEC 60950-1, UL 60950-1, EN60950-1
Power Automation IEC 61850-3, IEEE 1613
Accessories
Ordering Information
Model Name Description
Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, low-voltage power
RGS-PR9000-LV input
Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage power
RGS-PR9000-HV_US input, US power cord
Available Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage power
RGS-PR9000-HV_UK input, UK power cord
1
Model
Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage power
RGS-PR9000-HV_EU input, EU power cord
Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage power
Industrial Ethernet Switch
Optional Module
For 10G slot: For 1G slot:
SWM-02GP+_4 SWM-04GF-MM/SS-SC
Industrial 2-port 10G SFP+ module with 2x10GBase-X, Industrial 4-port Gigabit fiber module with 4x1000Base-
SFP+ socket FX SC Fiber ports
For 1G slot:
SWM-08GP
Industrial 8-port Gigabit fiber module with
8x100/1000Base-X, SFP socket