International Journal of Vol.x (No.x). yyyy. pp.

x-x
Innovation in Mechanical Engineering & Advanced Materials (IJIMEAM) Published online: Mmmm d, yyyy
https://publikasi.mercubuana.ac.id/index.php/ijimeam ISSN: 2477-541X

UMB INTERNATIONAL JOURNAL OF INNOVATION IN MECHANICAL

ENGINEERING AND ADVANCED MATERIALS

J. Q. Public1*, J. Doe1, and G. I. Joe2

The Technical Manuscript Design Group, Barcelona, SPAIN

1
2
The Scientific Paper Formatting Initiative, Zurich, SWITZERLAND

Abstract
This journal is a platform for publishing innovative research and overviews for mechanical engineering and
advanced material. The journal reports the science and engineering of advanced materials in the following
aspects publishes theoretical and practice oriented papers, dealing with problems of modern technology
(power and process engineering, structural and machine design, production engineering mechanism and
materials, etc.) It considers activities such as: design, construction, operation, environmental protection, etc. in
the field of mechanical engineering and other related branches.

Keywords: Journal, Mechanical, Engineering, Innovation, Material

*Corresponding author: Tel. +62 21 12345678 Fax +62 21 23456789

E-mail address: [email protected]

1. Introduction cutting-edge results warranting rapid

We are considering our future editorial work to communication. The journal also publishes special
be supported by the electronic system for managing issues on selected topics and overviews by invitation
journal. The authors are kindly invited to submit the only.
paper through our web site: The Journal publishes manuscripts written in
https://publikasi.mercubuana.ac.id/index.php/ijimea the English language. Manuscript submitted to the
m or editor e-mail[1]. journal for publication should be original
Authors are able to register and submit papers to contribution and must not have been previously
the journal directly through the journal's web site. published or is under consideration simultaneously
The Author is asked to upload the paper, as well as by any other publication.
provide metadata or indexing information associated
with the item, to improve the search capacity for 2.2 Experiment
research online and for this journal[2]. The Author is The manuscript should be typed with single
also able to accompany the paper with spacing, double column for the content
Supplementary Files in the form of cover letter, data (Introduction, Materials and Methods, Results and
sets, research instruments, source texts, etc. Discussion, Conclusion, Acknowledgement and
The Author is able to track the submission References). While the abstract, authors and
through the editorial process - as well as participate affiliations is single column. The manuscript will be
in the copyediting and proofreading of submissions published in A4 format not exceeding 15 pages. In
accepted for publication - by logging in, and using this format, define 1.9 cm (.75”) wide left and right
the username and password provided. margins. The bottom and top margins must be 2.54
cm (1”). For unit conversion: 1 inch = 2.54 cm.
2. Experimental and Procedures Define a two-column layout, with a space of
0.635 cm (0.25”) between columns[1]. The
2.1 Materials title/author/affiliation section should be centered
In addition, the journal also published in above both columns. No blank lines between title,
advanced material related with advanced electronic authors and institutions. Adjust the two columns on
materials, advanced energy materials, advanced the last page to equal length, as far as possible. All
engineering materials, advanced functional paragraphs are to be indented 0.635 cm (0.25”).
materials, advanced materials interfaces, advanced
optical materials, advanced science, particle &
particle systems characterization, small. Novel and
1
Copyright © 2022. Owned by Author(s). This is an open-access article under CC BY-SA License.
International Journal of Vol.x (No.x). yyyy. pp. x-x
Innovation in Mechanical Engineering & Advanced Materials (IJIMEAM) Published online: Mmmm d, yyyy
https://publikasi.mercubuana.ac.id/index.php/ijimeam ISSN: 2477-541X

3. Results and Discussion Table 1. Number N of abstracts submitted and number M

of submitting countries
3.1 Result of Main Experiment Region N M
Please use Times New Roman throughout the Americas 212 3
entire manuscript. The journal publishes with font Asia/Oceania 250 9
Europe/Africa 166 20
size of title (12 POINTS, BOLD, ALL CAPITALS),
Total 628 32
authors (12 points, italic), Affiliations (10 points,
regular), Text body (11 points, regular; all
All illustrations including figures, charts and
paragraphs indented .25), (Figure captions 10 points,
graphs, must be labeled and supplied on same pages
italic), Table captions (10 points, italic), and
from the text. The desired placement in the text
References (10 points, regular, numbered)[1,2].
should be clearly indicated. These illustrations
The title of a manuscript should be concise,
should be referred to and numbered serial, as figures.
descriptive and preferably not exceeding 15 words.
All illustrations should be clearly drawn in
The manuscript must include an abstract, describing
permanent ink or photographed in sharp black and
its main points within 150 - 300 words in English
white and reproduced in the form of high - contrast
language.
glossy prints or digital images and provided in
camera ready form.
3.2 Result of Secondary Experiment
References in the text should be denoted by
In general, the contents should comprise of
giving the numbering in square brackets in line with
Introduction, Materials and Methods, Results and
the. All references list should be included at the end
Discussion, Conclusion, Acknowledgement and
of the manuscript. All references cited in the text
References. The manuscript should be supplied with
must appear in the reference list. Authors are
3-5 keywords[3].
responsible for the accuracy and completeness of all
Each figure should be accompanied by a
information in the reference. The actual authors can
numbered caption, as shown in Fig. 1, placed
be referred to, but the reference number(s) must
directly below the figure being described. Please
always be given. Number the references (numbers in
ensure that all labels, arrows, lines, and other
square brackets) in the list in the order in which they
graphical elements print with sufficient contrast
appear in the text.
When numbering equations, enclose numbers in
parentheses and place flush with right-hand margin
of the column, i.e., with appropriate punctuation.

A+B=C (1)

4. Conclusions
It is the author's responsibility to ensure that his
or her submitted work does not infringe any existing
copyright. Authors should obtain permission to
reproduce or adapt copyrighted material and provide
evidence of approval upon submitting the final
version of a manuscript.

5. Acknowledgements
Fig. 1. Graph of wrtbnklm uuuuuuuuu sdfgujk xxxxxc One set of proofs will be sent to the author(s) to
dfghjkl be checked for printer's errors and it is the
responsibility of the author(s) to submit corrections
Tables should span one column and should be to the Editorial Board.
preceded by a caption. Table 1 illustrates a possible
design. Design details are left to the author’s References
discretion. If a table or figure is too wide to be [1] Van der Geer, J. Hanraads, J. A. J. & Lupton, R.
contained in a single column, extend it over both A. The art of writing a scientific article. J. Sci.
columns, preferable at the top or bottom of a page. Commun. 2010;163:51–9.
[2] Strunk Jr., W. & White, E.B. The Elements of
Style. 4th ed. New York: Longman; 2000.
2
Copyright © 2022. Owned by Author(s). This is an open-access article under CC BY-SA License.
International Journal of Vol.x (No.x). yyyy. pp. x-x
Innovation in Mechanical Engineering & Advanced Materials (IJIMEAM) Published online: Mmmm d, yyyy
https://publikasi.mercubuana.ac.id/index.php/ijimeam ISSN: 2477-541X

[3] Mettam, G. R. Adams, L. B. How to prepare an

electronic version of your article. In: Jones, B. S.
& Smith, R. Z. editors. Introduction to the
Electronic Age, New York: E-Publishing Inc;
2009, p. 281–304. Note shortened form for last
page number. e.g., 51–9, and that for more than
6 authors the first 6 should be listed followed by
'et al.'

3
Copyright © 2022. Owned by Author(s). This is an open-access article under CC BY-SA License.