Scribd
Upload
179 views2 pages

Industrial Gear Oil Solutions

The AGIP BLASIA series of oils were developed to meet requirements for EP (extreme pressure) lubrication, especially for gears under severe operating conditions. They are formulated from paraffinic base stocks and additives like sulfur and phosphorus compounds to provide good performance under high speeds, shock loads, and high loads. AGIP BLASIA oils demonstrate very good antiwear and EP properties in various tests. They also have properties like thermal and oxidation stability, non-corrosiveness, demulsibility, and rust protection. The oils are recommended for lubricating enclosed gears and other heavily loaded components operating at high temperatures and loads.

Uploaded by

Marcelo Ferreira Melo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
179 views2 pages

Industrial Gear Oil Solutions

The AGIP BLASIA series of oils were developed to meet requirements for EP (extreme pressure) lubrication, especially for gears under severe operating conditions. They are formulated from paraffinic base stocks and additives like sulfur and phosphorus compounds to provide good performance under high speeds, shock loads, and high loads. AGIP BLASIA oils demonstrate very good antiwear and EP properties in various tests. They also have properties like thermal and oxidation stability, non-corrosiveness, demulsibility, and rust protection. The oils are recommended for lubricating enclosed gears and other heavily loaded components operating at high temperatures and loads.

Uploaded by

Marcelo Ferreira Melo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

AGIP BLASIA

PRODUCT DATA SHEET

The AGIP BLASIA series has been developed to meet the widest range of requirements of EP (Extreme
Pressure) lubrication, such as, for instance, gears operating under severe duty (ISO-L-CKD classification).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which
ensure good high-speed and shock-load performance) and phosphorus compounds (for low-speed and high-
load performance).
They thus satisfy the widest range of operational requirements.

CHARACTERISTICS (TYPICAL FIGURES)

AGIP BLASIA 68 100 150 220 320 460 680


Viscosity at 40°C mm²/s 64 100 141 220 300 460 627
Viscosity at 100°C mm²/s 8,2 11,8 13,9 18,7 23,0 30,9 35,4
Viscosity Index - 95 95 95 95 95 95 90
Flash Point COC °C 225 230 235 240 240 245 250
Pour Point °C -27 -24 -22 -20 -18 -15 -9
Mass density at 15°C kg/l 0,885 0,890 0,895 0,895 0,900 0,905 0,915

PROPERTIES AND PERFORMANCE

ƒ AGIP BLASIA oils have very good antiwear and EP properties as demonstrated by the following tests:
- FZG: pass the 12th stage level;
- TIMKEN: OK LOAD 60 lbs;
- 4 BALL EP:* 110 kg last nonseizure load;
- * 280 kg weld load.
ƒ The oils also possess the following properties:
ƒ thermal and oxidation stability, permitting continuous use at operating temperatures as high as 100 °C
ƒ non-corrosiveness towards materials employed for the construction of machinery and especially those
used for gaskets and seals, as well as metals such as steel, cast iron, copper and bronze;
ƒ demulsibility: AGIP BLASIA oils separate rapidly from water and thus ensure perfect lubrication even in
applications where water contamination is possible, as in steelmaking plants, for instance;
ƒ rust protection properties: These oils effectively help protect and conserve lubricated parts even in
damp conditions;
ƒ toxicity: the products are non-toxic since they contain no lead compounds; they can thus be used in
oil-mist lubrication systems.

APPLICATIONS

AGIP BLASIA oils are recommended for splash or circulation lubrication of all types of enclosed gears,
especially where operating conditions involve heavy loads, high speeds and high relative sliding velocities,
at elevated ambient and operating temperatures. The oils can also be used to lubricate other heavily-
loaded parts and components such as couplings, transmission screws and low speed plain bearings. As
indicated, they can be used, too, in oil-mist lubrication systems.

Eni S.p.A. Via Laurentina 449, 00142 Roma


Tel. centralino +39 06 5988.1
[IN334.05.03]
Divisione Refining & Marketing www.eni.it Page 1 of 2
AGIP BLASIA
PRODUCT DATA SHEET

SPECIFICATIONS

AGIP BLASIA oils meet the requirements of the following specifications:

- ISO-L-CKD
- ANSI/AGMA 9005-D94 (AGMA 2EP, 3EP, 4EP, 5EP, 6EP, 7EP, 8EP)
- ASLE EP
- DIN 51517 teil 3 CLP
- U.S. STEEL 224
- DAVID BROWN S1.53.101(5E)
- ISO 12925-1

AGIP BLASIA products have been approved by the CINCINNATI MILACRON (P-63 ISO 68, P-77 ISO 150, P-74
ISO 220,P-35 ISO 460).
AGIP BLASIA 150, 220, 320, 460, 680 are approved by Danieli according to Standard 0.000.001 specification

Eni S.p.A. Via Laurentina 449, 00142 Roma


Tel. centralino +39 06 5988.1
[IN334.05.03]
Divisione Refining & Marketing www.eni.it Page 2 of 2

You might also like