Scribd
Upload
3K views3 pages

Form Work Tie Rod Calculation 1

This document summarizes calculations for a sedimentation wall project. It includes: 1) Calculation of maximum concrete lateral pressure of 33.59 KN/m2 based on formwork height, concreting rate, temperature, cement type, and concrete density. 2) Calculation of tie rod sizing and spacing, with tie rods determined to be 14.93mm diameter at 600mm spacing able to withstand calculated lateral pressures. 3) Calculation of deflection in vertical soldier beams, with determined deflection of 0.80mm being less than the allowable deflection of 1.8mm.

Uploaded by

Nalin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
3K views3 pages

Form Work Tie Rod Calculation 1

This document summarizes calculations for a sedimentation wall project. It includes: 1) Calculation of maximum concrete lateral pressure of 33.59 KN/m2 based on formwork height, concreting rate, temperature, cement type, and concrete density. 2) Calculation of tie rod sizing and spacing, with tie rods determined to be 14.93mm diameter at 600mm spacing able to withstand calculated lateral pressures. 3) Calculation of deflection in vertical soldier beams, with determined deflection of 0.80mm being less than the allowable deflection of 1.8mm.

Uploaded by

Nalin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd

Project: KG-1 SHEET NO : 1

Element: Sedimentation wall DATE : 15/02/2005

ref Calculation Results

1 Concrete Lateral pressure Calculation.

[
Pmax =D [ C1 √ R ]+ D C2 K ( √ H−C 1 √ R ) ] OR Pmax  DH
Whichever is the smaller.

a. Formwork vertical height , H= 3 m


b. Average rate of concreting , R= 1 m/Hr
c. Temperature of concreting at the time of placing, t= 24 centi.
d. Type of cement C2,= 0.3
e. Density of concrete, D= 25 KN/m3
f. Coefficient of formwork of wall, C1 = 1

Pmax = 33.59 KN/m2 OR Pmax =Dh = 75 KN/m2

( )
2
36
Where, K= 0.81 K=
t+16
The maximum concrete lateral Pressure= 33.59 KN/m2

2 Concret Lateral pressure Distribution

3 Tie Rod Calclation

Load Calculation

F=( P max × A×F s 1 + F c ×F s2 )


Fs1 = 1.5
Where Fs1, Fs2- Safety factors Fs2 = 1.4
Fc- Compaction Load, Cosider 6KN

PROJECT KG-1 SHEET NO 2


ELEMENT Sedimentation wall DATE : 15/02/2005

ref. Calculation Results

T18, Tie Rod diameter 14.93mm and Net Area, A = 174 mm2
Use G 43 Steek, Ps = 215 N/mm2

Let Tie Rod Spacings @ 600mm at 450mm height P1 = 33.59 KN/m2


F1 = 24.27 KN Spacing = 0.6 m

Tie Rod Spacings @ 600mm at 1050mm height P2 = 33.59 KN/m2


F2 = 31.07 KN Spacing = 0.6 m

Tie Rod Spacings @ 600mm at 1950mm height P3 = 23.67 KN/m2


F3 = 27.57 KN Spacing = 0.6 m

Tie Rod Spacings @ 1200mm at 2850mm height P3 = 3.38 KN/m2

F3 = 11.59 KN Spacing = 1.2 m

Fallowable = Ps* A = 37.41 KN > F1,F2,F3,F4

It is OK.

4 Vertical Soldier Calculation

Vertical Soldiers use 2Nos. 50x100x2 mm SHS


Ixx = 1121200 mm4 E= 210000
Wxx = 22420 mm3

Q=P 'max ×amax a max = 0.75

Q= 44.09 KN/m ' 58.79


Pmax =
Consider Simply supported for 2nd span
Here a = 750 mm
P'max ×a×b2 b= 900 mm
σ max =
2×8×W xx

σ max = 99.56 Mpa < Ps= 215 Mpa

Strength is Ok.

Check for Deflection.


4
5×q max ×b = 0.80 mm
W max =
384×E×(I ×2)

W allowable =900/500 = 1.8 mm

The Deflection is OK

You might also like