Scribd
Upload
591 views3 pages

Structural Elements Dead Load

This document contains calculations of structural dead loads for various building elements including slabs, beams, walls, columns, and stairs for three floors - ground, second, and third floors. The slabs are 6 inch stone concrete with additional layers. Beams are 300x350mm reinforced stone concrete. Walls are either 6 inch or 4 inch concrete blocks. Columns are 300x400mm reinforced stone concrete. Stair loads assume 40% additional weight over slabs. Load calculations provide details on material densities and dimensions used.

Uploaded by

Agapito Barasi Kionisala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
591 views3 pages

Structural Elements Dead Load

This document contains calculations of structural dead loads for various building elements including slabs, beams, walls, columns, and stairs for three floors - ground, second, and third floors. The slabs are 6 inch stone concrete with additional layers. Beams are 300x350mm reinforced stone concrete. Walls are either 6 inch or 4 inch concrete blocks. Columns are 300x400mm reinforced stone concrete. Stair loads assume 40% additional weight over slabs. Load calculations provide details on material densities and dimensions used.

Uploaded by

Agapito Barasi Kionisala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

STRUCTURAL ELEMENTS Dead Load

Roof Deck
Slab Type 1
● 6'' (150 mm) Stone Concrete Fill 3.45 kPa
0.023*150
● Acoustic Fibreboard as Ceiling 0.05 kPa
● Electrical and Plumbing Materials (Assumed) 0.3 kPa
TOTAL SLAB TYPE 1 DEAD LOAD 3.8 kPa
Beam
● 300mm x 350 mm, made of reinforce stone
concrete 2.47 kN/m
0.3*0.35*23.54
Parapet Wall
● 6'' CHB, fully grouted using 19.6 kN/m³ density
unit of unit, plastered in both sides 1.2 m. 3.96 kN/m
(2.82+2(0.24))*1.2m.
Column
● 300mm x 400mm, reinforced stone concrete 8.47 kN/m
column, 3m height.
0.3*0.4*3*23.6
Third Floor
Slab Type 1
● 6'' (150 mm) Stone Concrete Fill 3.45 kPa
0.023*150
● Acoustic Fibreboard as Ceiling 0.05 kPa
● Ceramic Tile on 13 mm mortar bed 0.77
● Electrical and Plumbing Materials (Assumed) 0.3 kPa
TOTAL SLAB TYPE 1 DEAD LOAD 4.57 kPa
Beam
● 300mm x 350 mm, made of reinforce stone 2.47 kN/m
concrete
0.3*0.35*23.54
Walls and Partitions
● 6'' CHB, fully grouted using 19.6 kN/m³ density
unit of unit, plastered in both sides 3 meters high 9.9 kN/m
(exterior)
(2.82+2(0.24)) *3m.
● 4’' CHB, fully grouted using 19.6 kN/m³ density
unit of unit, plastered in both sides 3 meters high 9.51 kN/m
(interior)
(2.69+2(0.24)) *3m.
Column
● 300mm x 400mm, reinforced stone concrete 8.47 kN/m
column, 3m height.
0.3*0.4*3*23.54
Stair
● Assume additional 40% for total weight slab 6.398 kN/m
4.57+0.4(4.57)
Second Floor
Slab Type 1
● 6'' (150 mm) Stone Concrete Fill 3.45 kPa
0.023*150
● Acoustic Fibreboard as Ceiling 0.05 kPa
● Ceramic Tile on 13 mm mortar bed 0.77
● Electrical and Plumbing Materials (Assumed) 0.3 kPa
TOTAL SLAB TYPE 1 DEAD LOAD 4.57 kPa
Beam
● 300mm x 350 mm, made of reinforce stone 2.47 kN/m
concrete
0.3*0.35*23.54
Walls and Partitions
● 6'' CHB, fully grouted using 19.6 kN/m³ density
unit of unit, plastered in both sides 3 meters high 9.9 kN/m
(exterior)
(2.82+2(0.24)) *3m.
● 4’' CHB, fully grouted using 19.6 kN/m³ density
unit of unit, plastered in both sides 3 meters high 9.51 kN/m
(interior)
(2.69+2(0.24)) *3m.
Column
● 300mm x 400mm, reinforced stone concrete 8.47 kN/m
column, 3m height.
0.3*0.4*3*23.54
Stair
● Assume additional 40% for total weight slab 6.398 kN/m
4.57+0.4(4.57)
Ground Floor
Slab Type 1
● 6'' (150 mm) Stone Concrete Fill 3.45 kPa
0.023*150
● Acoustic Fibreboard as Ceiling 0.05 kPa
● Ceramic Tile on 13 mm mortar bed 0.77
● Electrical and Plumbing Materials (Assumed) 0.3 kPa
TOTAL SLAB TYPE 1 DEAD LOAD 4.57 kPa
Beam
● 300mm x 350 mm, made of reinforce stone 2.47 kN/m
concrete
0.3*0.35*23.54
Walls and Partitions
● 6'' CHB, fully grouted using 19.6 kN/m³ density
unit of unit, plastered in both sides 3 meters high 9.9 kN/m
(exterior)
(2.82+2(0.24)) *3m.
● 4’' CHB, fully grouted using 19.6 kN/m³ density
unit of unit, plastered in both sides 3 meters high 9.51 kN/m
(interior)
(2.69+2(0.24)) *3m.
Column
● 300mm x 400mm, reinforced stone concrete 8.47 kN/m
column, 3m height.
0.3*0.4*3*23.54
Stair
● Assume additional 40% for total weight slab 6.398 kN/m
4.57+0.4(4.57)

You might also like