LANDING VALVES
OBLIQUE VALVE, FLANGED INLET
PRODUCT DESCRIPTION
NAFFCO landing valves are suitable for installation on wet
ULVHUVLQDEXLOGLQJIRU´UH´JKWLQJSXUSRVHVZLWKSHUPDQHQWO\
charged water from a pressurised supply.
7KHODQGLQJYDOYHVDUHREOLTXHW\SHZLWKµDQJHGLQOHWDQG
are manufactured to comply to BS 5041 Part 1 standard with
delivery hose connection and blank cap complying with
BS 336:2010 standard.
7KH ODQGLQJ YDOYHV DUH FODVVL´HG XQGHU ORZ SUHVVXUH DQG
are suitable for use at nominal inlet pressure up to 15 bar.
FEATURES
%6,.LWHPDUNDQG/3&%FHUWL´HG with the valve fully closed.
Body material made of copper alloy to EN 1982 Disc facing rubber is of replaceable type.
Hand wheel material made of grey cast iron to BS EN 1561. Valves are provided with a strap and pad lock so that the
Blank cap material made of copper alloy to EN 1982. hand wheel can be secured to counter unauthorized use.
Possible to replace the gland seal when under pressure The hand wheel is BLACK painted and body to RED.
SPECIFICATIONS
Model Number NDR 098
Valve Type Oblique, Flanged Inlet
Pressure Rating Low Pressure Valve
Nominal Size DN50
Working Pressure 15 Bar Maximum
Test Pressure 9DOYH6HDW7HVWDW%DU%RG\7HVWDW%DU
Flange Drilling BS 4504 Part 2:1974 Table:16/21
Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure
BILL OF MATERIAL
Sl.No. Description Material
1 Handwheel Grey Cast Iron to BS EN 1561
2 Stem Copper Alloy to BS EN 12164
3 Bonnet Copper Alloy to EN 1982
4 Body Copper Alloy to EN 1982
5 Female Inst. Outlet Copper Alloy to EN 1982
6 Blank Cap Copper Alloy to EN 1982
7 Renewable Disk Facing Rubber to BS 1154
8 Washer Rubber to BS 1154
9 Gland Seal Rubber to BS 1154
10 Bonnet Seal 7HµRQ
11 Gland Copper Alloy to EN 1982
12 Strap with Pad Lock Strap-Leather (12mm Wide, 2mm Thick) LOCK-Non-Ferrous
www.naffco.com 41
OBLIQUE VALVE, MALE THREADED INLET
PRODUCT DESCRIPTION
NAFFCO landing valves are suitable for installation on wet
ULVHUVLQDEXLOGLQJIRU´UH´JKWLQJSXUSRVHVSHUPDQHQWO\
charged with water from a pressurized supply.
The landing valves are oblique type with threaded inlet and
are manufactured to comply to BS 5041 Part 1 standard with
delivery hose connection and blank cap complying with
BS 336:2010 standard.
7KH ODQGLQJ YDOYHV DUH FODVVL´HG XQGHU ORZ SUHVVXUH DQG
are suitable for use at nominal inlet pressure up to 15 bar.
FEATURES
BSI Kitemark approved. with the valve fully closed.
Body material made of copper alloy to EN 1982 Disc facing rubber are of replaceable type.
Hand wheel material made of grey cast iron to BS EN 1561. Valves are provided with a strap and pad lock so that the
Blank cap material made of copper alloy to EN 1982. hand wheel can be secured to counter unauthorized use.
Possible to replace the gland seal when under pressure The hand wheel is BLACK painted and body to RED.
SPECIFICATIONS
Model Number NDR 097
Valve Type Oblique, Threaded Inlet
Pressure Rating Low Pressure Valve
Nominal Size DN 21/2"
Working Pressure 15 Bar Maximum
Test Pressure 9DOYH6HDW7HVWDW%DU%RG\7HVWDW%DU
Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure
BILL OF MATERIAL
Sl.No. Description Material
1 Handwheel Grey Cast Iron to BS EN 1561
2 Stem Copper Alloy to BS EN 12164
3 Bonnet Copper Alloy to EN 1982
4 Body Copper Alloy to EN 1982
5 Female Inst. Outlet Copper Alloy to EN 1982
6 Blank Cap Copper Alloy to EN 1982
7 Renewable Disk Facing Rubber to BS 1154
8 Washer Rubber to BS 1154
9 Gland Seal Rubber to BS 1154
10 Bonnet Seal 7HµRQ
11 Gland Copper Alloy to EN 1982
12 Strap with Pad Lock Strap-Leather (12mm Wide, 2mm thick) LOCK-Non-Ferrous
42 www.naffco.com
PRESSURE REDUCING VALVE,
FLANGED INLET
PRODUCT DESCRIPTION
NAFFCO pressure reducing oblique landing valves are
VXLWDEOH IRU LQVWDOODWLRQ RQ ZHW ULVHUV LQ EXLOGLQJV IRU ´UH
´JKWLQJSXUSRVHVSHUPDQHQWO\FKDUJHGZLWKZDWHUIURPD
pressurised supply.
These landing valves are pressure reducing type designed
to provide a range of outlet pressure (4 bar -12 bar). The
/DQGLQJYDOYHVDUHFODVVL´HGXQGHUKLJKSUHVVXUHDQGDUH
suitable for use at nominal inlet pressure upto 20 bar.
FEATURES
BSI Kitemark approved.
Body material made of copper alloy to EN 1982.
Hand wheel material made of grey cast iron to BS EN 1561. Disc facing rubber are of replaceable type.
Blank cap material made of copper alloy to EN 1982. Valves are provided with a strap and pad lock so that the
Possible to replace the gland seal when under pressure hand wheel can be secured to counter unauthorized use.
with the valve fully closed. The hand is painted black and the body is painted red.
SPECIFICATIONS
Model Number NWR 120
Valve Type Oblique, Pressure Reducing, Flanged Inlet
Pressure Rating High Pressure Valve
Nominal Size DN50
Working Pressure 20 Bar Maximum
Test Pressure 9DOYH6HDW7HVWDW%DU%RG\7HVWDW%DU
Flange Drilling BS4504 Part: 2 :1974Table : 16/21
Min. Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure
Min. Valve Pressure Regulating 4-12 Bar
BILL OF MATERIAL
Sl.No. Description Material
1 Handwheel Grey Cast Iron to BS EN 1561
2 Stem Copper Alloy to BS EN 12164
3 Bonnet Copper Alloy to EN 1982
4 Body Copper Alloy to EN 1982
5 Female Inst. Outlet Copper Alloy to EN 1982
6 Blank Cap Copper Alloy to EN 1982
7 Renewable Disk Facing Rubber to BS 1154
8 Washer Rubber to BS 1154
9 Gland Seal Rubber to BS 1154
10 Bonnet Seal 7HµRQ
11 Gland Copper Alloy to EN 1982
12 Strap with Pad Lock Strap-Leather (12mm Wide, 2mm Thick) LOCK-Non-Ferrous
www.naffco.com 43
