Simulation of shaft
Date: Tuesday, December 19, 2023
Designer: Solidworks
Study name: Static 2
Analysis type: Static
Table of Contents
Description ........................................... 1
Assumptions .......................................... 2
Model Information................................... 2
Study Properties ..................................... 3
Units ................................................... 3
Material Properties ................................. 4
Description Loads and Fixtures .................................. 4
No Data Connector Definitions .............................. 5
Interaction Information ............................ 5
Mesh information .................................... 5
Sensor Details ........................................ 5
Resultant Forces..................................... 6
Beams ................................................. 6
Study Results ......................................... 7
Conclusion ............................................ 8
Analyzed with SOLIDWORKS Simulation Simulation of shaft 1
Assumptions
Model Information
Model name: shaft
Current Configuration: Default
Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Boss-Extrude2
Mass:517,638 kg
Volume:66.3639 m^3 C:\Users\HP\OneDrive\Des
Solid Body Density:7,800 kg/m^3 ktop\[Link]
Weight:5.07286e+06 N Dec 19 [Link] 2023
Analyzed with SOLIDWORKS Simulation Simulation of shaft 2
Study Properties
Study name Static 2
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from Off
SOLIDWORKS Flow Simulation
Solver type Automatic
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document
(C:\Users\HP\OneDrive\Desktop)
Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Analyzed with SOLIDWORKS Simulation Simulation of shaft 3
Material Properties
Model Reference Properties Components
Name: Plain Carbon Steel SolidBody 1(Boss-
Model type: Linear Elastic Isotropic Extrude2)(shaft)
Default failure Max von Mises Stress
criterion:
Yield strength: 2.20594e+08 N/m^2
Tensile strength: 3.99826e+08 N/m^2
Elastic modulus: 2.1e+11 N/m^2
Poisson's ratio: 0.28
Mass density: 7,800 kg/m^3
Shear modulus: 7.9e+10 N/m^2
Thermal expansion 1.3e-05 /Kelvin
coefficient:
Curve Data:N/A
Loads and Fixtures
Fixture name Fixture Image Fixture Details
Entities: 5 face(s)
Type: Fixed Geometry
Fixed-1
Resultant Forces
Components X Y Z Resultant
Reaction force(N) 8.16584e-06 -0.213584 4.21405e-05 0.213584
Reaction Moment(N.m) 0 0 0 0
Load name Load Image Load Details
Entities: 1 face(s)
Reference: Axis1
Type: Apply torque
Torque-1 Value: 18,750 N.m
Analyzed with SOLIDWORKS Simulation Simulation of shaft 4
Connector Definitions
No Data
Interaction Information
No Data
Mesh information
Mesh type Solid Mesh
Mesher Used: Blended curvature-based mesh
Jacobian points for High quality mesh 16 Points
Maximum element size 0.404809 m
Minimum element size 0.404809 m
Mesh Quality High
Mesh information - Details
Total Nodes 14206
Total Elements 8635
Maximum Aspect Ratio 3.0797
% of elements with Aspect Ratio < 3 100
Percentage of elements with Aspect Ratio > 10 0
Percentage of distorted elements 0
Time to complete mesh(hh;mm;ss): [Link]
Computer name:
Sensor Details
No Data
Analyzed with SOLIDWORKS Simulation Simulation of shaft 5
Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 8.16584e-06 -0.213584 4.21405e-05 0.213584
Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0
Free body forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 3.09646e-05 0.000321865 -0.00022018 0.000391197
Free body moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 1e-33
Beams
No Data
Analyzed with SOLIDWORKS Simulation Simulation of shaft 6
Study Results
Name Type Min Max
Stress1 VON: von Mises Stress 0.000e+00N/m^2 5.009e+03N/m^2
Node: 11 Node: 12165
shaft-Static 2-Stress-Stress1
Name Type Min Max
Displacement1 URES: Resultant Displacement 0.000e+00mm 7.578e-05mm
Node: 9 Node: 54
shaft-Static 2-Displacement-Displacement1
Analyzed with SOLIDWORKS Simulation Simulation of shaft 7
Name Type Min Max
Strain1 ESTRN: Equivalent Strain 0.000e+00 1.809e-08
Element: 5259 Element: 4813
shaft-Static 2-Strain-Strain1
Conclusion
Analyzed with SOLIDWORKS Simulation Simulation of shaft 8
