Scribd
Upload
112 views2 pages

Ultrasonic Tube Sealer GTP WM I/II

The ultrasonics Tube Sealer GTP WM was designed for crimping, welding and cutting copper tube up to 8 mm in diameter and 0.75-1.1 mm wall thickness. The GTP WM I model welds tube up to 0.75 mm thickness, while the GTP WM II model welds tube up to 1.1 mm thickness. Both models use an ultrasonic generator that is 450 mm long, 280 mm high, 200 mm wide and weighs 8.5 kg, and operate at 20,000 Hz with a 3 kW maximum power output requiring 6.5 bar minimum air pressure.

Uploaded by

Sylvain Agueda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views2 pages

Ultrasonic Tube Sealer GTP WM I/II

The ultrasonics Tube Sealer GTP WM was designed for crimping, welding and cutting copper tube up to 8 mm in diameter and 0.75-1.1 mm wall thickness. The GTP WM I model welds tube up to 0.75 mm thickness, while the GTP WM II model welds tube up to 1.1 mm thickness. Both models use an ultrasonic generator that is 450 mm long, 280 mm high, 200 mm wide and weighs 8.5 kg, and operate at 20,000 Hz with a 3 kW maximum power output requiring 6.5 bar minimum air pressure.

Uploaded by

Sylvain Agueda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

GTP WM I / II

Ultrasonic welding machine

GALILEO TP PROCESS EQUIPMENT S.r.l.


Via del Pantano 73 – 50018 Scandicci (Firenze) Italia – Tel. (+39) 055 7221358 – Fax (+39) 055 7222225 –
Web site www.galileotp.com – E-mail [email protected]
The ultrasonics Tube Sealer GTP WM was designed for crimp, weld and cut the copper tube up to a total
diameter of 8 mm and 0,75 mm wall thickness for the WM1 and 1,1 mm for the WM2 model.
It is also available in EX proof version.

WM 1 WM 2

The technical data The technical data

Generator: Generator:
Length: 450 mm Length: 450 mm
Height: 280 mm Height: 280 mm
Width: 200 mm Width: 200 mm
Weight 8.5 kg Weight 8.5 kg
Input Voltage: 190 - 265 V AC / 50-60 Hz Input Voltage: 190 - 265 V AC / 50-60 Hz
fuse: 16 A fuse: 16 A
power connection with a grounded connector. power connection with a grounded connector.
Power output: max. 3 kW Power output: max. 3 kW
Air Pressure Input min. 6.5 bar Air Pressure Input min. 6.5 bar
Operating frequency 20.000 Hz Operating frequency 20.000 Hz

Machine: Machine:

Length: 530 mm Length: 597 mm


Height: 230 mm Height: 230 mm
Width: 110 mm Width: 110 mm
Weight 13.0 kg Weight 13.5 kg
Operating frequency 20.000 Hz Operating frequency 20.000 Hz

Connection Cable: * Connection Cable: *


Length: 6,00 m Length: 6,00 m
Weight 6.0 kg Weight 6.0 kg

 Other connection cables available upon request:


- Length 4,00 m
- Weight 4,5 Kg
- Length 10,00 m
- Weight 9,5 kg

*data subject to change

You might also like