Name:
Checklists of Requirements in the Preparation and Evaluation of Architectural and Engineering Design Development
Drawings and other Documents
Reference: Revised Implementing Rules and Regulations of the National Building Code of the Philippines (PD 1096)
SHEET CONTENTS REMARKS*
ARCHITECTURAL DRAWINGS
Perspective
Vicinity Map/Location Plan (2.00 Kms. Radius) Table of Contents
Site Development Plan
Floor Plans (scale 1:100m minimum) including furniture layout
Four (4) Elevations (scale 1:100m minimum)
Two (2) Sections (scale 1:100m minimum) including spot details when necessary
Roof Plan/s showing downspouts (scale 1:100m minimum), including detail of gutter,
downspout, etc.
Reflected ceiling plan/s (scale 1:100m minimum), including details
Details of Stairs (scale 1:50m), including details of railings, treads, risers, etc.
Details of Toilets (1:50 m) in the form of plans, elevation/section
Detail of typical bay section from ground to roof (scale 1:50 m)
Details of kitchens (1:50 m) in the form of plans, elevations/section, isometric
Schedule of doors, etc. (scale 1:50 m), including specifications for materials and
hardware
Schedule of windows (scale 1:50 m), including specifications for materials and hardware
Schedule of finishes for interior and exterior floors, walls, ceilings
Floor Plans showing layout of floor finishes (scale 1:100m minimum) / floor pattern
Architectural Interior Perspective/s of kitchen and master’s T & B
TOTAL
SHEET CONTENTS REMARKS*
STRUCTURAL DRAWINGS
General Notes and Construction Standards (2 sheets)
Foundation Plan/s (scale 1:100m minimum)
Floor Framing Plan/s (scale 1:100m minimum) (floor joist/slab-on-fill)
Roof Framing Plan at bottom chord level (scale 1:100m minimum)
Roof Framing Plan at top chord level (scale 1:100m minimum)
Detail of Footings and Columns
Detail of Beams
Detail of Trusses
Detail of drywall partition
TOTAL
SHEET CONTENTS REMARKS*
ELECTRICAL DRAWINGS
General Notes and Legends
Lighting Layout (scale 1:100m minimum) including details
Power Layout (scale 1:100m minimum) including details
Schedule and Detail of Loads
Riser Diagram
TOTAL
SHEET CONTENTS REMARKS*
PLUMBING DRAWINGS
General Notes and Legends
Storm Drainage Layout (scale 1:100m minimum) including actual length of tapping line
to Main Drainage Line
Waterline Layout (scale 1:100m minimum)
Sewer line Layout (scale 1:100m minimum)
Isometric Layout, showing waterline, sewer line and drainage line
Detail of connections, catch basins, downspouts, etc.
Detail of Septic Tank/Sewer Treatment Plant
Detail of Gutter
TOTAL
