Scribd
Upload
34 views1 page

Transmission System Monitoring Guide

The document outlines the monitoring items for a transmission controller system, including various parameters such as fan pump speed, clutch solenoid currents, and oil temperatures. Each item is associated with a specific display code, data range, and unit of measurement. Additionally, it provides status display information for clutch fill displays and input/output signals.

Uploaded by

João Maria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views1 page

Transmission System Monitoring Guide

The document outlines the monitoring items for a transmission controller system, including various parameters such as fan pump speed, clutch solenoid currents, and oil temperatures. Each item is associated with a specific display code, data range, and unit of measurement. Additionally, it provides status display information for clutch fill displays and input/output signals.

Uploaded by

João Maria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

TROUBLESHOOTING Flow of modes and functions

TRANSMISSION [Transmission controller system]


Monitoring
No. Monitoring Item Item Display Data Display Range Unit
Code
1 Transmission controller ROM part No. TRANSM ROM 20201 Arabic Numerals Status display
2 Fan pump speed FAN PUMP 41000 0 ~ 3000 rpm
3 Transmission cut-off pressure LH BRAKE 41200 0.00 ~ 50.00 MPa
4 Left brake pressure CUT OFF 41100 0.00 ~ 50.00 MPa
5 No. of times of kick down K/D TIMES 41300 — —
6 Average cycle time CYCLE TIME 41400 — sec.
7 F clutch solenoid circuit ECMV F 31608 0 ~ 1000 mA
8 R clutch solenoid circuit ECMV R 31608 0 ~ 1000 mA
9 1st clutch solenoid circuit ECMV 1 31602 0 ~ 1000 mA
10 2nd clutch solenoid circuit ECMV 2 31603 0 ~ 1000 mA
11 3rd clutch solenoid circuit ECMV 3 31604 0 ~ 1000 mA
12 4th clutch solenoid circuit ECMV 4 31605 0 ~ 1000 mA
13 Lock-up clutch solenoid current ECMV LU 31609 0 ~ 1000 mA
14 Fan pump solenoid valve current FAN EPC 41400 0 ~ 1000 mA
15 Torque converter oil temperature ECMV OIL TEMP 41500 24 ~ 131 °C
16 Engine mode selection ENGINE MODE 41600 P/N —
17 Shift mode selection SHIFT MODE 41700 H/M/L —
18 F clutch fill time FILL TIME F 41808 0 ~ 2550 msec
19 R clutch fill time FILL TIME R 41806 0 ~ 2550 msec
20 1st clutch fill time FILL TIME 1 41802 0 ~ 2550 msec
21 2nd clutch fill time FILL TIME 2 41803 0 ~ 2550 msec
22 3rd clutch fill time FILL TIME 3 41804 0 ~ 2550 msec
23 4th clutch fill time FILL TIME 4 41805 0 ~ 2550 msec
24 F clutch fill display FILL SW(F) 31508 0~1 Status display
25 R clutch fill display FILL SW(R) 31506 0~1 Status display
26 1st clutch fill display FILL SW(1) 31502 0~1 Status display
27 2nd clutch fill display FILL SW(2) 31503 0~1 Status display
28 3rd clutch fill display FILL SW(3) 31504 0~1 Status display
29 4th clutch fill display FILL SW(4) 31505 0~1 Status display
30 Input signal D_IN_0-7 D-IN--0------7 40905 See separate table Status display
31 Input signal D_IN_8-15 D-IN--8------15 40906 See separate table Status display
32 Input signal D_IN_16-23 D-IN--16------23 40907 See separate table Status display
33 Input signal D_IN_24-31 D-IN--24------31 40908 See separate table Status display
34 Output signal D_OUT_0-6 D-OUT-0------6 40915 See separate table Status display
35 Output signal SOL/0_0-5 SOL/O-0------5 40914 See separate table Status display
36 Rear brake oil temperature R BRAKE OIL 30202 24 ~ 131 °C

★ Content of display for monitoring items No. 24 ~ 29

0: Normal
1: Delayed

WA470-5H / WA480-5H 20-239

You might also like