Wet Processing
Process Step Products General Features Special Advantages Standard Formulations Secondary Spinning SELBANA CO Improves spinning yield Less dust formation Improves yarn regularity For ring and OE spinning Good antistatic potential No yellowing/no bad smell Easily soluble in water For honey dew affected cotton Liquid, free of phosphor 1st bath/60 C: 12-22 g/l NaOH (100%) 2 g/l COTTOCLARIN 1 g/l SECURON 2nd bath: rinsing at 60C Atomizer spray with water : 0.03 - 0.07% SELBANA CO o.w.f.** dilution rate 1:10 - 1:120
Reduces fiber fly in spinning No corrosion in machinary
Prescouring
COTTOCLARIN BAM
Good wetting + scouring product + biodegradable + no foam Good wetting + no redeposition Detergent + no foam Deaerating penetrating agent Dispersing + extracting aid Mercerizing aid + biodegradable
COTTOCLARIN OK SYNTERGENT TER-1 DEFINDOL NEP SECURON 540 Caustic Treatment FLORANIT 4028
Pasty, stable, 15B NaOH Biodegradable Phosphorous acid ester, stable to vat Hydrosulfite, no foam Complexing of Ca,Mg,Fe Liquid, alkalinestable 34B
1st bath: water passage 2nd bath: caustic soda 23B 3 g/l FLORANIT 1 g/l SECURON 540
SECURON 540
Complexing of Ca,Mg,Fe
Brilliant shade
3rd bath: hot rinsing 0.5 g/l SECURON 540 0.5 g/l COTTOCLARIN + x g/l dyestuff
Dyeing
COTTOCLARIN OK LAMEPON UV SYNTERGENT TER-1 SECURON 540
Dispersing of indigo Dispersing aid Dispersing aid + no foam Complexing agent High rebeaming speed Optimum smoothness
No redeposition Readily biodegradable Keeps dyeing unit clean
Softening for Rebeaming
BELSOFT 200 BELFASIN GT
Thermostable Stable up to pH 12
Normal: 30-50 g/l BELSOFT 200 Caustified: 30-50 g/l BELFASIN GT Nm 10/1 OE: 7.0% QUELLAX 130 HAP 1.5% FIBROSINT / MOLVENIN* 0.3% AVIROL GPW 715 Nm 40/1 Ring: 9.0% QUELLAX 130 HAP 2.5% FIBROSINT/ MOLVENIN* 0.3% AVIROL GPW 715 1.0 g/l DEFINDOL CONC
Sizing
QUELLAX 130 HAP MOLVENIN * FIBROSINT M 77 AVIROL GPW 715 STABIFIX IND
Good weaving efficiency Good weaving efficiency + no dust Good weaving synthetic size Size lubricant + easy wash off Improved wash + crock fastness
Biodegradable Readily biodegradable Brilliant shade Soft handle + biodegradable Dye fixing / sheet dyeing
* patent worldwide ** o.w.f. (on weight of fiber)
All products are registered trademarks
Garment Finishing
Process Step Products General Features Special Advantages Standard Formulations Desizing FORYLASE SPECIAL FORYLASE NTL Neutral cellulase powder + buffer All in one desizing enzyme Prevents crease marks Easy dosage Normal Stone Wash a) Desizing Good blue / white contrast Very abrasive + no backstaining 2 g/l FORYLASE SPECIAL / NTL 15 min, 50-60C pH 6.5 - 7.0 b) Chemical stone wash Acid cellulase powder + buffer Good outworn look + soft handle x kg pumice stone per kg garment 1-1.5% FORYLASE GRP / GR 60 min, 50C, buffered c) Washing 1g/l MILTOPAN SL 15 min, 60C, 2x rinsing d) Softening Antipilling + good handle Short process 1% BELFASIN OET / OZK o.w.f.** 15 min, 40C pH 5.0 - 7.0 Micro Wash System a) Desizing 2 g/l FORYLASE SPECIAL 15 min, 50C b) Micro stone wash 0.5-2.0 kg MILTOPAN GB* per kg garment ONDALON D - 20 Detergent powder with peroxide Chlorine absorbent, gray contrast 1 - 1.5% FORYLASE SW-GRP / GR o.w.f.** 45-90 min, 50C pH 6.5 - 7.0 c) Washing BELFASIN OZK Cationic liquid softener Ozone resistant 1 g/l MILTOPAN SL / V 15 min, 60C, 2 x rinsing BELFASIN 44 Cationic liquid softener Prevents yellowing, no fastness alteration, excellent soft handle d) Softening 1% BELFASIN OET / OZK o.w.f.** 15 min, 40C
Biostoning
FORYLASE SW - GRP FORYLASE SW - GR
FORYLASE SW 2000
MILTOPAN GB *
Special abrasive powder
Replacement of pumice stones Application for light fabrics Fibrillation of Lyocell Recyclable
Biofinishing
FORYLASE DYE
Acid cellulase liquid
Washing & Bleaching
FORYL SE
Nonionic surfactant
Prevents backstaining, no foam
MILTOPAN SL MILTOPAN V
Excellent powder detergent
With optical brightener Prevents backstaining, no foam
MILTOPAN ECO - PLUS
Ecological bleaching powder AOX free
Biodegradable, replaces chlorine bleach
Softening & Finishing
BELFASIN OET
Cationic liquid softener
Readily biodegradable, dermatology / toxicologywise safe
ADASIL PM / SM
Silicone emulsions
STABITEX WF
All in one resin for easy care
STABIFIX IND
Color fixing aid
Improves wet / dry crocking fastness, very dark look
REPELLAN KFC
* patent worldwide ** o.w.f. (on weight of fiber)
Stain repellant
Water + oil repellency
All products are registered trademarks
Finishing
Process Step Products General Features Special Advantages Standard Formulations Finishing BELSOFT 200 / N Nonionic softeners: Good softness No colour change No yellowing Full handle Hydrophilic, thermostable Cationic liquid softeners: Excellent softness Universal softener 1. Soft + full handle 20-50 g/l BELSOFT 200 20-30 g/l ADALIN SO / FSO 2-5 g/l COTTOCLARIN F padding, pick up 60-70% 2. Very soft and full handle 20-40 g/l BELSOFT 200 20-10 g/l ADASIL PM / ME 2-5 g/l COTTOCLARIN F 3. Soft, smooth, full handle, sewability 20-30 g/l BELFASIN 44 / 2015 10-20 g/l ADALIN 1167 / REPELLAN NEW 3-4 g/l DEFINDOL CONC 4. Like 3 + dimensional stability 20-30 g/l STABIFORM 691 40-50 g/l BELSOFT 200 30-40 g/l ADALIN 1167/ REPELLAN NEW 5 g/l DEFINDOL CONC 5. Weighting, soft + smooth, good sewability x g/l COTTOSINT 150 20-40 g/l BELSOFT 200 10-20 g/l ADALIN 1167 / NI 20-30 g/l ADASIL SO / FSO 2-5 g/l COTTOCLARIN F 6. Foam: soft, smooth, full, good sewability 50-80 g/l BELSOFT N 30-60 g/l ADALIN 1167 / REPELLAN NEW 10-12 g/l LAVIRON 118 SK vacu-foam pick-up 20% ,
BELFASIN 44 OET 2015 SI ADALIN NI / K 1167
No loss of fastness Readily biodegradable Full + soft handle Silicone touch
Polyethylene softeners: Excellent smoothness Good sewability Improved tear strength Improved abrasion resistance Permanent effects Silicone softeners: Supersoft touch Good sewability Improved tear strength Improved abrasion resistance Permanent effects Sanforizing agents
High density PE, nonionic High density PE, cationic Low density PE, nonionic
REPELLAN NEW
ADASIL 98-N ADASIL PM / ME ADASIL SM
Silicone compound Silicone microemulsion Excellent silicone handle
ADALIN SO
No damage to rubber belts Uniform shrinkage Hydrophilic, soft, filling Foam application Fine + stable foam Polymer emulsions Natural polysaccharide
UTINAL IND ADALIN FSO / SO LAVIRON 118 SK STABIFORM 691/ 1009 COTTOSINT 150/ 9550 Foaming agent: Permanent stiffening Weighting
All products are registered trademarks
