iCAP 6000 Series
Consumables/Spares List 2012
Please note that this document is intended for internal use only by Thermo Fisher employees or representatives.
[email protected]
High-volume
Low-volume country country
Item Description Part Number recommended spares* recommended
spares**
Spare Parts for Sample Introduction Kits
Radial Torch (Tulip) 842312051141 1 3
Radial Torch (EMT) 842312051741 1 2
Radial Spray Chamber Adaptor (also replaces 842312051561) 842312051151 1 1
Duo Torch (Tulip) 842312051241 2 6
Duo Torch (EMT) 842312051841 2 4
Duo Spray Chamber Adaptor (also replaces 842312051571) 842312051251 1 1
Organics/High Solids Spray Chamber 842312051311 0 1
V Groove Nebuliser 842312051321 0 1
AeroSalt Nebuliser 842312051331 0 1
Centre Tube 1mm ID (Tulip) 842312051341 1 4
Centre Tube 1.5mm ID (Tulip) 842312051351 1 4
Centre Tube Ceramic 2mm ID (Tulip) 842312051361 1 1
Centre Tube 2mm ID (Tulip) 842312051371 1 4
Centre Tube 1mm ID (EMT) 842312051941 1 3
Centre Tube 1.5mm ID (EMT) 842312051951 1 3
Centre Tube Ceramic 2mm ID (EMT) 842312051961 1 1
Centre Tube 2mm ID (EMT) 842312051971 1 3
EMT Torch holder assembly (torch holder including o-rings) 842315550171 0 1
Tulip Torch holder (formerly 430116621771) (excluding o-rings) 430116621772 0 1
EMT Centre Tube Holder assembly (centre tube holder including o-rings) 842315550181 0 1
Tulip Centre Tube Holder assembly (centre tube holder including o-rings) 842312051381 0 1
Sampling O Ring Kit (includes o-rings for Tulip and EMT torch assemblies) 842312051401 2 6
Spray Chamber 842312051411 1 5
Ball Joint Clip (also replaces 842312051581) 842312051421 0 1
Nebuliser 842312051431 1 5
Spray Chamber Jacketed 842312051441 0 1
Radial Spray Chamber HF 842312051451 0 1
Duo Spray Chamber HF 842312051461 0 1
Twister Spray Chamber for Isomist Radial kit 842312051661
Twister Spray Chamber for Isomist Duo kit 842312051671
Unifit Right Angle Connector for Isomist Radial/Duo Kits (3 pack) 842312051681
Mira Mist Nebuliser 842312051471 0 1
Pump Sample Tube Aqueous (pack of 6) 842312051511 2 10
Pump Drain Tube Aqueous (pack of 6) 842312051521 2 10
Pump Sample Tube Organics (pack of 6) 842312051531 1 5
Pump Drain Tube Organics (pack of 6) 842312051541 1 5
Solvent Flex Pump Sample Tubing (pack of 6) 842312051621 1 2
Solvent Flex Pump Drain Tubing (pack of 6) 842312051631 1 2
Internal Standards Kit, including Y connector, capillary tubing, and 6 pairs of 842312051551 0 2
pump tubing
Duo, Radial plasma view window 842312051591 0 1
Replacement Tubing Kit for enhanced Hydride system 842312051611 0 1
Torch connector for enhanced hydride kit 430116621851 0 1
Sample Introduction Spares Kit, including drain and nebuliser tubing (with 842312051751 2 10
connectors), nebuliser gas tubing, capillary tubing for drain and sample inlet,
and sampling probe
6mm to 4mm nebuliser gas adaptor for iCAP 6000 (replaces 4301 228 41731) 842315550651 0 1
Base and Inner Tube for Radial and Duo D ceramic torch 842312052204 0 1
Ceramic Outer Tube for Duo D ceramic torch 842312052205 0 1
Ceramic Outer Tube for Radial D ceramic torch 842312052206 0 1
Quartz Outer Tube for Duo D ceramic torch 842312052207 0 0
Quartz Outer Tube for Radial D ceramic torch 842312052208 0 0
Optical Fibre for Duo D ceramic torch 842312052209 0 0
Retaining Ring for Radial and Duo D ceramic torch 842312052210 0 0
Injector Adaptor for radial and Duo D type ceramic torch 842312052211 0 0
Injector Consumables Kit for Radial and Duo Ceramic Torch 842312052212 0 0
Dual Port Axial Spray Chamber for SSEA 842315550591 0 0
Radial Sample Introduction Kits
Radial Aqueous Kit 842312051791 0 0
Radial Organic Kit 842312051701 0 0
Radial Volatile Organic Kit 842312051711 0 0
Radial HF Kit 842312051721 0 0
Radial High Solids Kit 842312051731 0 0
Isomist Radial Kit 842312051651 0 0
Radial EMT Torch Kit - Organics 842312052011 0 1
Radial EMT Torch Kit 842312052021 0 1
Radial EMT Torch Kit - High Solids 842312052031 0 1
Radial EMT Torch Kit - HF 842312052041 0 1
Radial Ceramic D Torch Kit 842312052201 0 1
Duo Sample Introduction Kits
Duo Aqueous Kit 842312051891 0 2
Duo Organics Kit 842312051801 0 1
Duo Volatile Organics Kit 842312051811 0 1
Duo HF Kit 842312051821 0 1
Duo High Solids Kit 842312051831 0 1
Isomist Duo Kit 842312051641 0 0
Duo EMT Torch Kit - Organics 842312051981 0 1
Duo EMT Torch Kit 842312051991 0 1
Duo EMT Torch Kit - HF 842312052001 0 1
Duo Ceramic D Torch Kit 842312052202 0 1
Argon Humidifier, Vapour and Hydride kits and Spares
Argon Humidifier 842312052081 0 0
Argon Humidifier Tubing Kit 842312052101 0 0
Argon Humidifier Dispersion Tube 842312052111 0 0
Basic Vapour System 842318050001 1 2
Integrated Vapour System 842318050101 0 0
Consumable Parts for Integrated Hydride Kit 842318050151 0 0
Spare Semi-Permeable Membrane for Integrated Vapour System 942346010021 0 0
Replacement Tubing Kit for Integrated Vapour System 842312052611 0 0
High-volume
Low-volume country
Service country
Item Description Part Number recommended
Spares recommended
spares*
spares**
Electrical
Control PCB - I/O board (formerly 430117960004, 430117960005,
842315550491 1 2
842315550121)
Accessory Interface Kit 842311051001 0 0
Circuit Breaker 401320700310 0 0
Electrical mains filter for iCAP (replaces 401320700311) 842315550441 0 0
Electrical mains filter for iCAP mark 1 only 401320700311 0 0
RJ45 inline connector (previously 401320700317) 401320700410 1 3
Main transformer (formerly 430117223002,3) 842315550531 0 0
6.3A (20x5mm) antisurge fuse 250Vac for i/o control board 242208601136 0 0
1A (20x5mm) antisurge fuse 250Vac for i/o control board 242208601021 0 0
Air filter (5 pack) for extraction sensor on i/o control board 842315550681 3 1
Polychromator
M3/M4 assembly (formerly 430117220011) 842315550031 0 1
Grating and prism assembly (formerly 430117220001) 842315550041 0 1
M1 mirror assembly - Duo 430117220051 0 0
M1 mirror assembly - Radial 430117220431 0 0
M1 Spring only 430122820811 1 3
Duo M2 mirror assembly with motor 430117220061 0 0
Radial M2 mirror assembly with motor 430117220481 0 0
M2 main motor (fitted to inside bulkhead of polychromator) 430122820301 0 0
Duo M2 mirrior 842315550261 0 0
Radial M2 mirrior 842315550271 0 0
M1 motor with drive arm fitted 430117220291 0 0
Slit assembly including motor 430117220031 0 1
Flash-up LED assembly 430117223121 0 1
iCAP Mark 1 purge interface kit (Figure eight gasket and thermal breaks) 842315550431 0 0
Gas System
All MFC control gas box for 6500 (formerly 430122820031, 430122820032)
842315550091 0 1
(includes nebuliser tube with check valve)
Standard gas box with manual nebuliser control (formerly 43012282002-2, 3,
842315550071 0 1
4, 5) (includes nebuliser tube with check valve)
Standard gas box with MFC controlled nebuliser (includes nebuliser tube with
842315550081 0 1
check valve)
Nebuliser pressure regulator for gas box with manual control nebuliser 842315550231 0 1
Molecular Sieve Drying Trap for iCAP Mk1 and Mk2 (includes full tubing and
842315550331 0 1
connectors kit to fit into a Mk1)(replaces 4301 228 20271)
Additional Gas Accessory 842311051011 0 0
External Gas Push Connector (for tubing from plasma and purge gas supplies) 430122820641 2 4
Tubing set - external gas and water tubing (12 mm water tubing and 6 mm gas
430116622484 0 2
tubing). (formally 430116622482)
Gas Filter Kit (one filter with 6 mm connectors) 842312052121 1 2
Water System
Coolant water solenoid (for mark 1 & 2 iCAP 6000 - includes instructions and
842315550471 0 1
adaptor for Mk1)
Coolant Water Solenoid Valve for Mark 1 iCAP 6000 430122820401 0 0
Coolant water flow sensor for iCAP mark 1 (formerly 430122820961) 430117223161 0 1
Coolant water flow sensor for iCAP mark 2 842315550461 0 1
External Water Push Connector (for pipes from chiller) 430122820471 0 2
iCAP filter for cooling fluid - push fit connectors 12mm 842315550481 1 2
Torch Box
Purge window assembly (holder, window and clip) Duo and Radial 430117220301 0 1
Purge window and retaining clip only 430117220421 0 0
iCAP 6000 flat purge window only 430116850301 0 0
Flat-handled torch compartment door assembly, including hinges and fittings 430117220401 0 0
Round-handled torch compartment door assembly, including hinges and
430117220551 0 0
fittings
Spare hinges and screws for flat handled torch box door 842315550221 0 1
Door/torch microswitch 430117223171 0 0
Ceramic cone - radial (formerly 430116620482) 842312051161 0 1
Ceramic cone - duo (formerly 430116620421) 842312051261 0 1
Ceramic cone for 6200 instrument only (short cone) 842315550541 0 0
Duo radial plasma view window (formerly 430116850322, 430116850323) -
842312051591 0 1
beaker shaped window. Radial view for Duo instrument.
Radial view fold mirror assembly (periscope mirror) 430117220411 0 1
Fibre optic cable 430116621781 0 1
Mk 2 iCAP 6000 torch box assembly - Radial 842315550411 0 0
Mk 2 iCAP 6000 torch box assembly - Duo 842315550421 0 0
RF Power
Supply
iCAP Radial Mk2 RF Complete Assy (replaces Mk1 RF generator in Mk1
842315550561 0 1
Instruments)
iCAP Duo Mk2 RF Complete Assy (replaces Mk1 RF generator in Mk1
842315550571 0 1
Instruments)
Duo and Radial (clear) coil assembly for iCAP Mk 1 (Do not use 4600563) 4600501 0 1
Coil assembly for RF Mk2 842315550391 0 1
3 kW Power supply for iCAP mark 2 RF Generator 842315550381 0 1
Interface PCBA for iCAP mark 2 RF Generator (includes cable from bulkhead
842315550351 0 1
to RF PCB)
Feed through capacitor for iCAP mark 2 RF Generator 842315550371 0 1
RF PCBA for iCAP DUO mark 2 RF Generator 842315550611 0 1
RF PCBA for iCAP RADIAL mark 2 RF Generator 842315550601 0 1
Ignitor module for iCAP mark 2 RF Generator 842315550341 0 1
High-volume
Low-volume country
Service country
Item Description Part Number recommended
Spares recommended
spares*
spares**
Other
Hardware
CID camera spare with fittings (formerly 430122820011/2/3/4/5/6) 842315550051 0 0
Exchange CID camera with fittings 842315550051EX 0 1
3 channel pump (formerly 430122820881) 430122821701 0 1
4 channel pump (formerly 430122820003) 430122821711 0 1
Service Kit 3 Channel Pump 842315550241 0 1
Service Kit 4 Channel Pump 842315550251 0 1
Rubber standoff/isolator/buffer for iCAP pumps 842315550671 0 1
Spare screws + nuts for all iCAP parts 430117220441 0 0
Fore optic opto sensors/drain sensor opto sensor (formerly 4202 17203051)
430117223451 0 1
Polychromator gasket set (replaces 430117220471) 842315550401 0 1
Gasket set for Mark 1 only (includes vacuum grease) 430117220471 0 0
Complete set of plastic covers, including door for 6200 842315550551 0 0
Complete set of plastic covers, including door for 6300 842316050011 0 0
Complete set of plastic covers, including door for 6500 842316050111 0 0
Cover door assembly 6300 (spare)(formerly 4301 166 21791) 842315550101 0 0
Cover door assembly 6500 (spare)(formerly 4301 166 20751) 842315550111 0 0
Cover door assembly 6200 (spare) 842315550521 0 0
iCAP 6000 tubing connectors (no tubing) - (replaces 430117220461 and
842315550511 0 1
430117220451 if 842315550501 also ordered)
iCAP 6000 tubing (no connectors) - (replaces 430117220461 and
842315550501 0 1
430117220451 if 842315550511 also ordered)
Drip dray 842312051391 0 0
Extraction hose for iCAP 430116621843 0 0
Tygon tubing for extraction sensor 401322841611 0 0
Corrosion inhibitor for chiller 430122821331 1 5
Installation and preventative maintenance kit
842315550021 1 5
- including set up and test solutions, chiller inhibitor, o-rings
iCAP Plumbing Kit (Spares)
Chiller inhibitor, Multi element test solution, Setup solutuion, all internal cooling 842315550631 1 2
tubing, instructions, tubing release tool.
iCAP Mark 1 (with mark 1 RF generator) plumbing kit to repair cooling water
system.
842315550641 0 1
Tools, tubing set, connectors, solenoid valve, instructions, plugs, tubing
release tool.
iCAP Repair Kit - Includes Torchbox refurbishment parts, label set, D
842315550291 1 4
Connector back shell kit, Contact cleaning strips and instructions.
Replacement Aqueous Test solutions for iCAP Validator Kit 842313050711 0 0
iCAP Parts Sent with a new spectrometer 842315550321 0 0
Manuals
iCAP 6000 Service manual 849940030021 - -
iCAP 6000 User Guide Printed with Supplementary CD including software
430117221321 - -
manual, hardware manual, tutorials, etc.
iTEVA Security Installation Manuals 849940020011 - -
Software
iTEVA Routine software upgrade Available by download or from [email protected]
- -
iTEVA Routine software upgrade to iTEVA Security 842313050601 - -
iTEVA Security software 842313050501 - -
Tools
Anemometer (for measuring extraction flow) 430122821681 1 5
Digital water flow meter (for measuring coolant flow) 842315550661 1 5
* Recommended quantity of stock holding for a country selling fewer than 20 iCAPs per year. This stock is to enable customer next day
delivery locally. Resupply from Cambridge is about 2 weeks.
** Recommended quantity of stock holding for a country selling more than 20 iCAPs per year. This stock is to enable customer next
day delivery locally. Resupply from Cambridge is about 2 weeks. v 5.7.9
