2 1/2"
3/16" Fire Rated Glass Set In Silicone Channel
Sound Reduction Door
Sound Reduction Door
1" 1 1/2"
1" 1 1/2"
1 1/2" Insulated Glass Unit
1/2" Laminated Glass
Set In Silicone Channel (1/4" Lam x 3/4" air space x 1/2" Annealed)
Set In Silicone Channel (Factory Installed)
1/2"x1-1/2" Isolator Strip
DOOR CONSTRUCTION (non fire rated Glass
TOP AND BOTTOM DG20 DOOR VISION (fire rated - Glass factory installed) IGU20 DOOR VISION Factory Installed) HINGE / STRIKE JAMB
MODEL AS46P UTILIZES "S" PROFILE FRAME SPECIFICATIONS
(Seal set 6 for single) (Seal set 4 for pair) 1) All exposed surfaces of door and frame to receive one coat of rust inhibitive
Pemko S44 Seal (2 rows) prime paint complying with ASTM A250.10.
2) An aluminum threshold is included.
3) Bottom seals require a flush level sealing surface. The threshold must be
Varies
level and may require shimming to compensate for an uneven floor. This will
prevent any sound leaks at this location.
4) Assembly is equipped with metal sound door, frame, seals and
threshold. Product is also crated for shipment.
5) Door Thickness is 1 3/4". Door weight is 8.4 pounds per square foot. Be
SOUND FRAME PROFILE
aware that the frame must be securely tied to the framing from the sub floor to
the structure above. HINGE
6) Doors are to be formed of no less than 18 Gauge steel face sheets PREPARATION
7) Frames are to be formed of no less than 16 Gauge sheet (HINGE PREP
Sound Reduction Door
steel with corners mitered, continuously welded and ground smooth. IS HANDED)
8) Doors and frames are formed from commercial quality cold rolled steel with
optional zinc coating conforming to ASTM A653 & ASTM A924. Acoustical core 7 GAGE REINFORCEMENT
and internal construction are manufacturer's proprietary standards as tested in 4-1/2" OR 5"
2 rows Pemko S771 seal
accordance with ASTM E90, E413, E1332, & E2235. REGULAR OR HEAVY
9) Frames must be fully grouted. RockWool Delta-10 mineral wool board is an WEIGHT HINGES
Threshold ANSI A156.7
acceptable alternative.
Pemko 2009APK 10) Please be aware industry standard construction tolerances for squareness PEMKO Meeting Stile
Acoustical Doors
#303SA Furnished
of frame installation, plumbness of walls, flatness of floors, etc. may result in a
difference of 3db-5db sound loss in a field test vs. lab results.
MODEL AS46P 11) Alternate seal sets may be supplied based on function of hardware.
STC 42-46 (Flush Singles) 12) Plastic laminate veneer options available upon request.
PEMKO # S44
1 3/4" Acoustical Door System
Tech. Data 2ALa ASTRAGAL ( Both leaf active)
Seal Retainer Retainer Cover
PEMKO Meeting Stile Rubber Seal Pack with Acoustical
#303SA Furnished Insulation by others
Removable Hardware
Mullion Furnished By
Hardware Supplier
(Fill with Plaster by Installer)
TESTED AND IN COMPLIANCE WITH ASTM E90, ASTM E413, ASTM E1332, & ASTM E2235.
DOOR SYSTEMS ARE IN COMPLIANCE WITH HMMA 865 & SDI-128 SPECIFICATIONS.
COMPLETE WITH PERIMETER SOUND SEALS, BOTTOM SEALS AND THRESHOLD
1ALa Astragal
AS REQUIRED FOR RATING. 3ALa ASTRAGAL For Pairs with Inactive Leaf
