PLETRONICS OSP5

OSP5 Series
Series
OCXO
Features Applications

• Ovenized Quartz Crystal High Precision Square SONET / SDH / DWDM

Wave Generator Test & Measurement
• 5.0V nominal Supply Voltage Telecom Transmission & Switching Equipment
Base Stations / Picocell
• 5.0MHz - 40MHz Frequency Range Wireless Communication Equipment
• Voltage control option available
OSP5 Series
20.6 x 20.6 x 11.0 mm
• SC cut crystal
5 Pin Metal Package

Electrical Characteristics
Parameter Min Typ Max Unit Condition
Standard frequencies are 10, 12.8, 13, 15.36, 16.384, 19.2, 20, and
Frequency 5 - 40 MHz
25MHz
Frequency Stability vs Temperature ±10 - ±20 ppb ±5ppb available over temp range 0 to 70°C
Frequency Stability vs Supply - - ±0.5 ppb ±5% voltage change
Warm-up - - ±50 ppb In 3 minutes @ +25°C, referenced to 1 hour
- - ±0.5 ppb per day at time of shipment
Aging - - ±50 ppb per year
- - ±0.3 ppm 10 years
Operating Temperature Range -40 - +85 °C
Supply Voltage 1 VCC 4.75 5.0 5.25 V 3.3V input voltage available
Current - - 500 mA @turn on
Steady State - - 1.0 W @ 25°C
Spurious - - -60 dBc

Phase Noise 10 Hz -115

100 Hz -135
- - dBc/Hz
1 kHz -145
10 kHz -150

Storage Temperature Range -55 - +125 °C

Vcontrol Range 0 2 4 V

Pullability ±0.5 - - ppm Slope positive

Input Impedance 100 - - kΩ

Reference Voltage 3.8 4.0 4.2 V
Load 9 - - kΩ

HCMOS
Parameter Min Typ Max Unit Condition
Output Waveform Squarewave

“1” Level 3.5 - - V

“0” Level - - 0.5 V

Load - 15 - pF

Duty Cycle 45 50 55 % @+2.0V

1
Note: Place a 10nF power supply bypass capacitor next to device for correct operation

Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. May 22, 2024 Rev. C
Production processing does not necessarily include testing of all parameters.
Copyright © 2024, Pletronics Inc.  19013 36th Ave. W, Lynnwood, WA 98036 USA [Link]  425-776-1880 Pg 1
 PLETRONICS OSP5
OSP5 Series
Series
OCXO

Device Marking

PLE = Pletronics
PLE OSP5xxx = Model number/Part number*
OSP5xxx [Link] = Frequency (M = MHz)
YMD = Date code (Year-Month-Day: See Table below)
[Link] z = Internal Factory Code
YMDz S/N: xxx = Serial number
S/N: xxx

* A unique number is assigned for your exact specifications.

Specifications such as part number, frequency stability, supply voltage and operating temperature range, etc. are not identified from marking.
External packaging labels and packing list will correctly identify the ordered Pletronics part number.

Codes for Date Code YMD (Year Month Day)

Code 3 4 5 6 7 Code A B C D E F G H J K L M
Year 2023 2024 2025 2026 2027 Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

Code 1 2 3 4 5 6 7 8 9 A B C D E F G H J K L M N P R T U V W X Y Z

Day 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Package Labeling

P/N Label is 1" x 2.6" (25.4mm x 66.7mm) RoHS Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New Font is Arial
Bar code is 39-Full ASCII

Pletronics Inc. certifies this device is in accordance with the RoHS and REACH directives.
Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Moisture Sensitivity Level: 1 As defined in J-STD-020D
Second Level Interconnect code: e3

Environmental / ESD Ratings

Reliability: Environmental
Parameter Ref Standard Condition
Solderability MIL-STD-202, Method 208
Mechanical Shock MIL-STD-202, Method 213 Test Cond J 30g, 11ms, half-sine
Vibration MIL-STD-202, Method 201 0.06” Total p-p, 10 to 55 Hz
Thermal Shock MIL-STD-202, Method 107 Test Cond B 5 cycles –65 to +125 Deg C

Model Min Voltage

Human Body Model 2000V

Machine Model 200V

Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. May 22, 2024 Rev. C
Production processing does not necessarily include testing of all parameters.
Copyright © 2024, Pletronics Inc.  19013 36th Ave. W, Lynnwood, WA 98036 USA [Link]  425-776-1880 Pg 2
 PLETRONICS OSP5
OSP5 Series
Series
OCXO

Mechanical Dimensions

For Optimum Jitter Performance, Pletronics recommends:

$ A ground plane under the device
$ Do not route large transient signals (both current and voltage) under the device
$ Do not place near a large magnetic field such as a high frequency switching power supply
$ Do not place near piezoelectric buzzers or mechanical fans
$ Minimize air flow across the device

Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. May 22, 2024 Rev. C
Production processing does not necessarily include testing of all parameters.
Copyright © 2024, Pletronics Inc.  19013 36th Ave. W, Lynnwood, WA 98036 USA [Link]  425-776-1880 Pg 3
 PLETRONICS OSP5
OSP5 Series
Series
OCXO
Important Notice

Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other
changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice.
Customers are responsible for obtaining the latest relevant information before placing orders and should verify that
such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale
supplied at the time of order acknowledgment.

PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with
PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary
to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of
each product is not necessarily performed.

PLE assumes no liability for application assistance or customer product design. Customers are responsible for
their products and applications using PLE components. To minimize the risks associated with the customer
products and applications, customers should provide adequate design and operating safeguards.

PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, weapons, weapon systems or space applications, devices or systems or other critical applications
that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of
PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such
applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk appli-
cations should be directed to PLE.

PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent
right, copyright, artwork or other intellectual property right relating to any combination, machine or process which
PLE product or services are used. Information published by PLE regarding third-party products or services does
not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of
such information may require a license from a third party under the patents or other intellectual property of the third
party, or a license from PLE under the patents or other intellectual property of PLE.

Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without
alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this
information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such
altered documents.

Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that
product or service voids all express and implied warranties for the associated PLE product or service and is an
unfair or deceptive business practice. PLE is not responsible for any such statements.

Contacting Pletronics Inc.

Pletronics, Inc. Tel: 425.776.1880

19013 36th Ave. West Fax: 425.776.2760
Lynnwood, WA 98036-5761 email: ple-sales@[Link]
U.S.A. URL: [Link]

Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. May 22, 2024 Rev. C
Production processing does not necessarily include testing of all parameters.
Copyright © 2024, Pletronics Inc.  19013 36th Ave. W, Lynnwood, WA 98036 USA [Link]  425-776-1880 Pg 4