Section Seven

Operator Interface

Operator Interface Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3

Message Displays
MessageView Interactive Message Display Terminals . . . . . . . . . . . . . . . . . . 7-6
Dataliner Message Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
DTAM Plus Operator Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
DTAM Micro Operator Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
MicroView Operator Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21
DeviceView Configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23

Electronic Push-Button Modules

RediPANEL Operator Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-24
DeviceNet RediSTATION Operator Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 7-35

Graphic Terminals
PanelView 900 and PanelView 550 Operator Terminals and Software . . . . 7-36
PanelView 1200e and 1400e Operator Terminals and Software . . . . . . . . . 7-40
PanelView 1200 Operator Terminals and Software . . . . . . . . . . . . . . . . . . . . 7-42

Industrial Computer Products

Industrial Computers with Flat TFT Displays (6180 Series) . . . . . . . . . . . . . . 7-45
Industrial Computers with CRT Displays (6151 and 6152 Series) . . . . . . . . 7-46
Industrial Computers with CRT Displays (6153 and 6154 Series) . . . . . . . . 7-47
Industrial Computers without Integral Display (6155 and 6180 Series) . . . . 7-48
Industrial CRT Monitors (6156, 6158, and 6159 Series) . . . . . . . . . . . . . . . . 7-49
Industrial CRT Monitors (6157 Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-50
Ordering Information (Industrial Computer Products) . . . . . . . . . . . . . . . . . . . 7-51
Industrial Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-56
Industrial PC/AT Keyboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-57

Operator Interface Enclosures

ViewPort Operator Interface Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-58

Overview of NEMA Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-60

Supervisory Control and MMI Software

MMI Software Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-61
RSView Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-62
WINtelligent VIEW Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-64
(Continued)

7-1
Section Seven
Operator Interface

Software Components
WINtelligent RECIPE Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-65
RSTrend Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-66
ControlView Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-67
Process Configuration and Operation (PCO) Software . . . . . . . . . . . . . . . . . 7-69
RSPower Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-70
RSTools ActiveX Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-71
RSData Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-72
RSWorkbench Development Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-73

Product Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-74

7-2
 Overview
Operator Interface

Categories Products
Message Displays MessageView Operator Interface page 7-6
• Various vacuum flourescent displays
• NEMA Type 4x, 12, 13
• Class I Division 2
• UL/CSA
• CE Mark
Standard Format Message Displays page 7-8
Large Format Message Displays page 7-14
• Large red or tri-color (red, green, and amber) LED displays
• Visibility up to 73 meters (240 feet)
• NEMA Type 4 (indoor only), 12, and 13
• UL listed
• CE Mark
DTAM Plus Operator Interface page 7-17
• 4  20 LCD or vacuum fluorescent display
• NEMA Type 4x, 12, 13
• Class I Division 2
• CE Mark
DTAM Micro Operator Interface page 7-19
• 2  20 LCD display
• NEMA Type 4, 12, 13
• Class I Division 2
• CE Mark
MicroView Operator Interface page 7-21
• Specifically designed for use with MicroLogix processors
• 2  16 LCD Display
• NEMA Type 4, 12, 13
• Class I Division 2
• CE Mark
DeviceView Configurator page 7-23
• Specifically designed for use with DeviceNet network
• 2  16 LCD Display
• CE Mark
Electronic Push Button Modules RediPANEL Push Button Panels page 7-25
• Membrane or push-button devices
• Universal remote I/O connection
• NEMA Type 4x
RediPANEL Keypad Panels page 7-32
• 1  16 vacuum fluorescent display
• Universal remote I/O connection
• NEMA Type 4x
RediPANEL Plug & Go Panels page 7-33
• 800A push buttons
• Communicates with 1492 wiring system cables
• NEMA Type 12, 13
DeviceNet RediSTATION Operator Interface page 7-35
• Communicates on the DeviceNet network
• Pre-assembled option

7-3
Overview
Operator Interface

Categories Products
Graphic Terminals PanelView 900 Operator Terminals page 7-36
• Color 8.4-inch Active Matrix Thin Film Transistor (TFT)
- 640  480 VGA pixel resolution
• Monochrome 9.8-inch ac gas plasma display
- 640  400 pixel resolution
• NEMA Type 4x, 12, 13
• Microsoft Windows-based configuration software
• Touch-screen or membrane-key input
• 16 configurable function keys
PanelView 550 Operator Terminals page 7-37
• Monochrome 5.5-inch LCD display
• 256  128 pixel resolution
• NEMA Type 4x, 12, 13
• Microsoft Windows-based configuration software
• Touch-screen or combination touch and membrane-key input
• 10 configurable function keys
PanelView 1400e Operator Terminals page 7-40
• Color 14-inch CRT display
• 640  480 VGA pixel resolution
• NEMA Type 4x, 12, 13
• Microsoft Windows-based configuration software
• Touch-screen or membrane-key input
• 21 configurable function keys
PanelView 1200e Operator Terminals page 7-40
• Same features as 1400e terminals except 1200e terminals
have a color 12-inch CRT display
PanelView 1200 Operator Terminals page 7-42
Industrial Computer Products Industrial Computers with Flat TFT Displays page 7-45
• 10.4-inch display
• Panelmount or 19-inch rackmount
Industrial Computers with CRT Displays page 7-46
• Resistant to shock, vibration, dirt, washdowns, and high temperatures
• 14- or 20-inch display
• ISA and/or PCI bus architecture
Industrial Computers without Integral Display page 7-48
• 19-inch rack or bench top or panelmount
Industrial CRT Monitors page 7-49
• 14-, 17-, 20-, or 21-inch display
• Long-term dependable performance in harsh factory environments
• Panelmount or 19-inch rackmount
Industrial PC/AT Keyboards page 7-57
• Sealed elastomer technology
• Sealed membrane technology
• 101-key U.S. configuration
• NEMA Type 4, 12, 13
• Resistant to spills and dust

7-4
 Overview
Operator Interface

Categories Products
Operator Interface Software RSView Software page 7-62
Provides monitoring, control, and data acquisition functions in the Microsoft Windows environment.
WINtelligent VIEW Software page 7-64
A visual graphics system that simultaneously modifies and animates data values through state changes,
bargraphs, numeric, string, color changes, embedded trends, and slider bars to animate values.
WINtelligent RECIPE Software page 7-65
A Microsoft Windows-based application for managing industrial process control recipes used with program-
mable controllers.
RSTrend Software page 7-66
A powerful 32-bit application for collecting and monitoring real-time and historical PLC data for Microsoft
Windows, Windows 95, and Windows NT operating systems.
ControlView Software for DOS page 7-67
DOS or Windows-based MMI supervisory software used for
monitoring and controlling real-time data
Process Configuration and Operation Software page 7-69
A ControlView Software option that lets you develop your process more quickly and easily using familiar
tools. PCO MMI faceplates allow online operation, control, and maintenance of the process loops.
RSData Software page 7-72
Visual Basic-based custom-control software

7-5
Message Displays
MessageView Interactive Message Display Terminals
(Cat. No. 2706 Series)

• Communicate with slave message displays across an

RS-232-C link
• Operating system using 128K bytes of Flash EPROM
internal memory capable of storing 4096 messages
including run-time variables and application program code
for quick and easy on-site programming

Compatibility
MessageView terminals can be used in networks hosting a
wide range of devices. Some representative examples
include:
• Multiple MessageView terminals
• PLC/SLC controllers
• ASCII Input Devices
• 1747-SN Remote I/O scanners
The MessageViewt family of products includes flexible,
low-cost, interactive display devices for both text and graphic • Bulletin 2711 PanelView products
characters. MessageView terminals provide a high-level • Bulletin 2706 Dataliner message displays (DL10, DL40,
operator interface to logic controllers and other peripherals, DL50) as slave devices
and are designed to meet a variety of machine control and
monitoring applications. Versions available include
display-only, display plus numeric input, and display with Specifications
numeric input plus programmable function keys.
VFD Graphic Display
MessageView terminals can store 4,000 message entries
Size (all terminals) 26.9 mm (H) x 108.5 mm (W)
including variable and time/stamp data with its Historical
1.06 in (H) x 4.27 in (W)
Event Stack Memory. The terminals can view and sort
Characters 21  4; 10  2; 7  1
historical data by frequency and chronological order of
Pixels 128 x 32
occurrence, providing a highly diagnostic operator interface
device. In addition, the Historical Event database can be LED Indicators COMM Green
FAULT Red
imported into programs such as Microsoft ExcelR, Microsoft
Terminal Memory
AccessR, LotusR, and other Windowst based applications.
Application Memory 4096 messages x 21 characters
All MessageView terminals offer an RS-232 communication Historical Event Stack Memory 4000 messages x 21 characters
port on the main logic board. This port can be used for Communication
uploading and downloading application programs, uploading Universal Remote I/O Supports PLC and SLC controllers
the Historical Event Stack, communicating with ASCII Input ASCII Triggering Supports PLC and SLC controllers
devices, or with controllers using serial communication via Electrical
ASCII Triggering. In addition, MessageView terminals can Supply Voltage 18 to 30V dc (24V dc nominal)
accept a communication DaughterBoard with an adapter port Power Consumption 20 W maximum (833mA @ 24V dc)
for a Universal Remote I/O link. Environmental
Temperature range:
Features Operating 0 to 55° C (32 to 131° F)
• Text display using the industry standard Code Page 850 Storage -40 to 85° C (-40 to 185° F)
alphanumeric character set and ISA graphic symbols on a Humidity rating 5 to 95% (without condensation)
blue-green 128 x 32 dot matrix Vacuum Fluorescent Ratings Ul Listed, CSA Certified, CE Marked
Display NEMA Type 12, 13, 4X (indoor use only)
and Class I Division 2
• Eight brightness settings ranging from 12 to 100% Dimensions
• Special text formatting effects, including centering, Chasis: Terminals D and N 91 mm (H) x 202 mm (W) x 65 mm (D)
3.6 in (H) x 8.0 in (W) x 4.0 (D)
scrolling, blinking, and inverse text Terminal F 138 mm (H) x 202 mm (W) x 65 mm (D)
• Date and time data display from the on-board 5.5 in (H) x 8.0 in (W) x 4.0 in (D)
battery-backed Real Time Clock Front Bezel:Terminals D and N 130 mm (H) x 240 mm (W) x 16 mm (D)
5.1 in (H) x 9.5 in (W) x 0.6 (D)
• Insertion of ASCII and Numeric Entry, Display Variables Terminal F 177 mm (H) x 240 mm (W) x 16 mm (D)
7.0 in (H) x 9.5 in (W) x 0.6 in (D)
• Historical Event Stack logging of up to 4,000 message
Weight
entries including variables, time data, and message ACK
Terminals D and N 1.45 kg (3.2 lbs)
with time duration
Terminal F 1.72 kg (3.8 lbs)
• Communicate with PLC and SLC processors across a
Universal Remote I/O or RS-232-C link For ordering information, see page 7-7.

7-6
 Message Displays
MessageView Interactive Message Display Terminals
(Cat. No. 2706 Series)

Ordering Information
MessageView Interactive Message Display Terminals and Programming Software
Description Catalog Number
MessageView Display Terminal with 4-key interface, Universal 2706-M1D1
Remote I/O communication, and communication with slave message
displays
MessageView Display Terminal with 16-key interface, Universal 2706-M1N1
Remote I/O communication, and communication with slave message
displays
MessageView Display Terminal with 32-key interface, Universal 2706-M1F1
Remote I/O communication, and communication with slave message
displays
MessageView Display with 4-key interface and ASCII triggering 2706-M1D
functionality
MessageView Display with 16-key interface and ASCII triggering 2706-M1N
functionality
MessageView Display with 32-key interface and ASCII triggering 2706-M1F
functionality
MessageBuilder Off-line Programming Software package for 2706-MB1
Windows

Accessories
Description Catalog Number
Upload/Download cable 2706-NC13

7-7
Message Displays
Dataliner Message Displays
(Bulletin 2706 DL5, DL10, DL20, DL40, DL50)

Dataliner Message Displays are available in six types: For Dataliner accessories, see pages 7-15 and 7-16.
• DL5 Series one- or two-line, very compact, dc powered, For more information, see the product data publications:
stored message display with parallel interface, page 7-9 Dataliner 120V ac Parallel Input Converters (2706-2.1),
Dataliner DL10 and DL20 Enclosures (2706-2.2), Dataliner
• DL10 Series four-line message display with no memory.
Keyboards (2706-2.4), Dataliner Lithium Battery Information
Can be a slave to DL20 and DL40 displays, page 7-10
(2706-2.7), Dataliner DL40 Series Pass-Through Option
• DL20 Series one-, two-, or four-line stored message or (2706-2.10), Dataliner Cable Diagrams (2706-2.15).
slave displays with serial and parallel interfaces,
page 7-11
• DL40 Series two- or four-line stored message display with
serial, parallel, and Universal Remote I/O interfaces,
page 7-12
• DL50 Series large displays designed for high visibility up
to 73 m (240 ft). Characters are available in different
heights: either 53.3 mm (2.1 in) or 122 mm (4.8 in).
Characters are available in either red or tri-color
(red, green, amber), page 7-14

7-8
 Message Displays
Dataliner Message Displays
(Bulletin 2706 DL5)

Specifications Class I Div 2 Hazardous

Display characteristics
Character height • One-line: 5.31 mm (0.209 in)
• Two-line: 5.94 mm (0.234 in)
Character set Alphanumeric: uppercase only
Characters per line 16
Approximate viewing 3m (10 ft)
distance
Character type Vacuum fluorescent; 14 segment characters
Electrical
Input voltage 12-24V dc
Input power • Current: 250 mA maximum steady-state at 12V
input
• Power: 3 Watts maximum
• Ripple: 5% of input voltage peak-to-peak
maximum
• Noise: 5% of input voltage p-p maximum
Bulletin 2706 DL5 Dataliner Message Displays are available Operating and inrush • 12V dc: 250 mA operating (300 mA inrush)
in one- and two-line versions. These displays are designed current • 24V dc: 125 mA operating (300 mA inrush)
for panel mounting on equipment in industrial environments. Parallel port 16 data input lines and one parallel port select
They are powered by 12-24V dc. input
Parallel port data input 5 to 24V dc
These units store preprogrammed messages that are voltage
displayed when the DL5 receives a command from a Memory • 2K bytes EEPROM: 94 message blocks
controlling device, such as a programmable controller. • 8K bytes EEPROM: 387 message blocks
Programmed messages can display status, display variable Environmental
data, help diagnose problems, or prompt an operator. Temperature range • Operating: 0 to 50° C (32 to 122° F)
• Storage: -40 to 85° C (-40 to 185° F)
• Humidity: 5%-95% (without condensation)
Features
NEMA rating UL Listed for Type 12 and 13. Designed but not
• One- or two-line displays — 16 characters per line listed for Type 4.
UL File #E10314
• 5 mm (0.2 in) Vacuum Fluorescent Characters visible up UL Listed and CSA Certified for Class I Division 2
to 3 m (10 ft) Groups A, B, C, D Hazardous Locations
Surge withstand Passes IEEE Std. 472-1974 surge withstand
• 12-24V dc capability tests
• Pilot light replacement operating modes Dimensions
One- and two-line • Height 79.3 mm (3.12 in)
• Up to 387 message storage (8K bytes) • Width 159 mm (6.25 in)
• Depth 109 mm (4.31 in)
• EEPROM memory Shipping weight
• Numeric, binary, BCD, priority, round-robin operating Approximate
1.35 kg (3 lbs)
modes shipping weight

• Cyrillic character option

For accessories, see page 7-15.
• Simple programming with a dumb terminal and the
on-board editor or off-line programming package that runs
on most IBM PC or PC compatible computers (minimum
640K bytes RAM required)
• Compact size

Ordering Information
1. Select the required version
2. Select the amount of memory
3. Order the required programming cable for your terminal or
computer
8K bytes 2K bytes
Description (387 Message Blocks) (94 Message Blocks)
Catalog Number Catalog Number
One-line display by 16 characters — 2706-D11J2
Two-line display by 16 characters per line 2706-D21J8 2706-D21J2

7-9
Message Displays
Dataliner Message Displays
(Bulletin 2706 DL10)

Specifications Class I Div 2 Hazardous

Display characteristics
Character height Four-line: 12.7 mm (0.50 in)
Character set Uppercase and lowercase symbols
Characters per line 20
Approximate viewing distance Four-line: 7.6 m (25 ft)
Character type Vacuum fluorescent, 5 x 7 dot matrix
Electrical
Input voltage 110/120V ac ±10%, 50/60 Hz
220/240V ac (optional)
Input power Four-line — 55VA maximum
Serial input RS-232 and RS-422
Communication rate (selectable) 300, 1200, or 9600
Parity (selectable) Odd, even, none
Data length 7 data bits, + parity, 1 stop bit
Environmental
The DL10 Series includes four-line by 20-character message Temperature range • Operating: 0 to 60° C (32 to 140° F)
displays without memory. The DL10 Displays can function in • Storage: -40 to 85° C (-40 to 185° F)
either user-selectable “slave” or “terminal” mode. Humidity 5%-95% (without condensation)
NEMA rating • Standard: UL Listed for Type 12 and 13.
In the “slave” mode, a DL10 display receives data from a • Designed but not listed for Type 4.
DL20 or DL40 display acting as a “master.” • UL File #E10314
• IP65
In the “terminal” mode, a display receives serial data from a • Stainless steel faceplate available
computer or computer-like device. • Steel: UL Listed for Type 12, 13 and 4X
(indoor only)
• UL Listed & CSA Certified for Class I
Division 2 Groups A, B, C, D Hazardous
Features Locations
• 12.7 mm (1/2 in) characters. Readable from Dimensions
approximately 7.6m (25 ft) Four-line • Height 157 mm (6.2 in)
• Width 365 mm (14.4 in)
• 20 characters per line • Depth 129 mm (5.1 in)
Shipping weight
• Programming flexibility
Four-line 5.3 kg (11.68 lb)
• Serially addressable for multiple devices on the same
communication line
• Versatile screw terminal connections

Ordering Information
Description Catalog Number
Four-line by 20 characters per line 2706-A41J
DL10 Series Factory Options
Description Catalog Number
Stainless Steel Bezel Option — Installed at factory.
—
(Replace “J” in cat. no. with “C”.) Example: 2706-A41C
220/240V ac DL10 Display 2706-A42J
See page 7-15 for accessories.

7-10
 Message Displays
Dataliner Message Displays
(Bulletin 2706 DL20)

Specifications (See spec table below)

Display characteristics
Character height One-line: 14.2 mm (0.56 in)
Two-line: 11.3 mm (0.44 in)
Four-line: 12.7 mm (0.50 in)
Character set Uppercase and lowercase symbols
Characters per line 20
Approximate viewing distance One-line: 9.1 m (30 ft)
Two-line: 7.6 m (25 ft)
Four-line: 7.6 m (25 ft)
Character type Vacuum fluorescent, dot matrix
Electrical
Input voltage 85-264V ac, 47/63 Hz
Input power 45VA maximum at 85V ac
Fuse type USA: 1.25A, 250V, Type MDL
European: 1.5A, 250V, Type GMC
Serial input/output RS-232 and RS-422
The DL20 Series includes one-, two-, and four-line by 20 Communication rate: 300, 1200, or 9600
character message displays with memory. The DL20 Display (selectable)
can receive message triggers from most programmable Parity (send only): Odd, even, none
controllers or computers. (selectable)
Data length: 7 data bits (+ parity)
+12V dc out: 3 mA maximum
Parallel port terminals 10 data input lines. 2 strobe inputs.
Features 5 to 30V dc
(110/120V ac with 2706-NG1/ 2706-NG2
• Up to 31K bytes battery-backed RAM for message input converter)
• One-, two-, and four-line displays +5V dc out: 15 mA maximum
Memory 8K, 16K, 31K bytes of battery-backed
• Can program DL20 series displays via a menu-driven RAM
offline programming package that runs on most IBM PC or Environmental
PC-compatible computers (minimum 640K-byte RAM Temperature range • Operating: 0 to 60° C (32 to 140 ° F)
required). • Storage: -40 to 85° C (-40 to 185° F)
Humidity 5-95% (without condensation)
• Also programmable with keyboards (cat. nos. 2706-NK1
NEMA rating Standard: UL Listed for Type 12 and 13.
or -NK2) or a dumb terminal. Designed but not listed for Type 4. UL File
• 12.7 mm (½ in) High characters. Readable from #E56639
Stainless steel: UL Listed for Type 12, 13
approximately 7.6 m (25 ft)
and 4X (indoor only)
• 20 characters per line Dimensions
One- and two-line • Height 112 mm (4.4 in)
• Width 366 mm (14.4 in)
• Depth 188 mm (7.4 in)
Ordering Information
Four-line • Height 157 mm (6.2 in)
1. Select the required version: one-, two-, or four-line • Width 366 mm (14.4 in)
2. Select the amount of message memory: 8K, 16K, or • Depth 188 mm (7.4 in)
31K bytes Shipping weight
One-line 4.3 kg (9.5 lbs)
Important: DL20 displays (Series G or later) have a lifetime Two-line 4.3 kg (9.5 lbs)
battery that does not require replacement. Four-line 5.4 kg (12 lbs)

8K-byte Message 16K-byte Message 31K-byte Message

Description Memory Memory Memory
Catalog Number Catalog Number Catalog Number
One-line display 2706-B13J8 2706-B13J16 2706-B13J31
Two-line display 2706-B23J8 2706-B23J16 2706-B23J31
Four-line display — 2706-B43J16 2706-B43J31

DL20 Series Factory Options

Description Catalog Number
Stainless Steel Bezel Option — Installed at factory. (Replace “J” in
—
cat. no. with “C.”) Example: 2706-B23C16
See page 7-15 for accessories.

7-11
Message Displays
Dataliner Message Displays
(Bulletin 2706 DL40)

• EEPROM Memory Modules are available for uploading,

downloading, and storing messages

Specifications (See spec table below)

Display Characteristics
Character height • Two-line: 11.3 mm (0.44 in)
• Four-line: 11.3 mm (0.44 in)
Character set Upper and lower case, extended ASCII
Characters per line 20
Approximate viewing distance 7.62 m (25 ft)
Character type Vacuum fluorescent, 5 x 7 dot matrix
characters
Development software Runs on most IBM PC or PC compatible
computers including Allen-Bradley
computers
• Pull-down menu-driven
The DL40 Series includes two- and four-line by 20-character • 3-1/2 inch floppy diskette
message displays that have serial and parallel interfaces and Electrical
an option to connect to Allen-Bradley PLC controllers via the Input voltage 85-264V ac, 47/63 Hz
Universal Remote I/O link. Input power 45VA maximum at 85V ac
Fuse type USA: 1.25A, 250V, Type MDL
Features European: 1.5A, 250V, Type GMC
• Diagnostic and Alarm Handling Functions provide Serial input/output RS-232 and RS-485
information to the operator during fault conditions Communication rate 300, 1200, 2400, 4800, 9600 or 19,200
(selectable)
• Optional Universal Remote I/O Communication to Parity Odd, even, none (selectable)
Allen-Bradley SLC and PLC controllers via the Universal Data length 7 or 8 bits
Remote I/O link Parallel port terminals 16 data input lines, 4 strobe inputs,
5 to 30V dc (110/120V ac with 2706-NG2
• Remote I/O PassThrough allows uploading and
input converter),
downloading to messages via DH+ or Ethernet and (two converters may be required)
remote I/O communication with a PLC-5 controller +12V dc out: 300 mA maximum
• Front-Panel Push Buttons are able to acknowledge the Annunciation relay 3A @ 240Vdc (ac); 3A @ 30V dc (dc)
receipt of messages, as well as select modes of operation Universal Remote I/O Communication
and set up parameters Communication rate 57.6, 115.2, or 230.4k bit/s
Maximum I/O cable distance 2800 m (10,000 ft) for 57.6k bit/s
• ASCII Input to PLC via IBM or Compatible Keyboard let 1400 m (5,000 ft) for 115.2k bit/s
the operator send information, such as part numbers or 700 m (2,500 ft) for 230.4k bit/s
recipe input, to the PLC controller via the DL40 Rack sizes 1/ , 1/ , 3/ or 1
4 2 4,
Supports single transfers and block
• Simplified Programming through the use of a transfers
menu-driven, off-line programming package that runs on Block transfer Allows up to 12 words of data to be
most IBM PC or PC compatible computers transferred with 1/4 rack of I/O image
table.
• Extended ASCII Characters provide characters, such as
Environmental
é, ñ and ö, that allow display of messages in a number of
Temperature range Operating: 0 to 60° C (32 to 140° F)
languages including German, French, and Spanish. Storage: -40 to 85° C (-40 to 184° F)
Cyrillic character set is optional Humidity Humidity: 5-95% (without condensation)
• Connects to DL10 or DL50 slaves for multiple display NEMA rating Standard: UL Listed for Type 12 and 13.
Designed but not listed for Type 4. UL File
systems
#E56639
Multiple Run Modes provide the flexibility for the DL40 to Stainless steel: UL Listed for Type 12, 13
and 4X (indoor only)
meet various applications:
Dimensions
• Message/Variable Run Mode provides capability to Two-line • Height 112 mm (4.4 in)
embed process variables into a message • Width 366 mm (14.4 in)
• Depth 124 mm (4.9 in)
• Message/Variable Slave Run Mode lets you designate Four-line • Height 157 mm (6.2 in)
DL10 or DL50 slaves at runtime • Width 366 mm (14.4 in)
• Depth 124 mm (4.9 in)
• Bit Trigger Run Mode lets you trigger messages with
Shipping weight
single bits (Universal Remote I/O only)
Two-line 3.4 kg (7.5 lbs)
• Message List Run Mode lets you to repeatedly display Four-line 4.2 kg (9.2 lbs)
multiple messages
For communication options and ordering info, see page 7-13.
7-12
 Message Displays
Dataliner Message Displays
(Bulletin 2706 DL40)

Communication Options

A-B Universal Appears as 1/4, 1/2, 3/4, or full I/O rack. Supports
Remote I/O single-transfer and block-transfer of I/O data (optional).
16 data-input lines, 4 strobe lines, 12V dc internal power
Parallel port
supply
• Allows upload/download from development system to a
RS-232 serial single DL40.
port • Allows upload/download from tape recorder.
• Allows serial printing during run-time
• Allows message triggering
• Allows upload/download from development system to a
RS-485 serial
single DL40.
port
• Allows for communication to slave (DL10 and DL50)
message displays.
Allows input from an IBM compatible keyboard or bar-code
IBM keyboard device, such as a bulletin 2755-EZ to 2755-EZ3,
port 2755-G3-W, -G6-W, -LD1-D, -LD2-D. Data is returned
either through the remote I/O link or the RS-485 serial port.

Ordering Information
1. Select the number of lines: two-line or four-line
2. Select the message memory size:
16K bytes — two-line only
32K bytes — two- and four-line
64K bytes — four-line only
128K bytes — four-line only
3. Select the required version: (All units contain RS-232, RS-485, and IBM PC keyboard ports)
- Universal Remote I/O
- parallel port

Description Message memory size Catalog Number

Two-line display 16K bytes 2706-E23J16
Two-line display 32K bytes 2706-E23J32
Four-line display 32K bytes 2706-E43J32
Four-line display 64K bytes 2706-E43J64
Four-line display 128K bytes 2706-E43J128
Two-line display with Universal Remote I/O 16K bytes 2706-E23J16B1
Two-line display with Universal Remote I/O 32K bytes 2706-E23J32B1
Four-line display with Universal Remote I/O 32K bytes 2706-E43J32B1
Four-line display with Universal Remote I/O 64K bytes 2706-E43J64B1
Four-line display with Universal Remote I/O 128K bytes 2706-E43J128B1
DL40 Series Factory Options

Description Catalog Number

Stainless Steel Bezel Option — Installed at factory.
(Replace “J” in cat. no. with “C”.) Example: —
2706-E23C32
Cyrillic character option four-line display with Universal
2706-NX3
Remote I/O, 32K-byte memory

For accessories, see page 7-15.

7-13
Message Displays
Dataliner Message Displays
(Bulletin 2706 DL50)

Specifications (See spec table below)

Display Characteristics
Character height 53.3 mm (2.1 in) or 122 mm (4.8 in), selectable
Character set Standard and Extended ASCII
Characters per line 2.1 in characters: 20 or 40
4.8 in characters: 10 or 20
Approximate viewing 2.1 in characters: 30.5 m (100 ft)
distance 4.8 in characters: 73 m (240 ft)
Display types Tri-color or red monochrome LED matrix
Display color Red, green or amber characters
Electrical
Input voltage: 100 to 240V ac, 50 to 60 Hz
Input power: 2706-F11J 140VA
2706-F11JC 150VA
2706-F21J 250VA
2706-F21JC 280VA
Fuse type: USA 2.5A, Type AGC
The DL50 features either red or a tri-color LED display for European 2.5A, Type GMA
enhanced message visibility. Large red, green or amber Annunciation relay: AC 3A at 240V ac
character displays allow messages to be seen and DC 3A at 30V dc
responded to quickly, reducing downtime and response time. Communication
Selectable character sizes of 53 mm (2.1 in) or 122 mm (4.8 Protocols: Simplex Serial ASCII protocol
in) can be viewed from a distance of up to 73 m (240 ft). Duplex Serial ASCII protocol with ACK / NAK response
and optional checksum
These displays can be used as a slave to either a DL20 or
Serial input RS-232 point-to-point, and RS-485 multi-drop
DL40 message display. The DL50 can also receive
Communication rate 300, 1200, 9600 or 19,200 bit/s
messages from any PLCR, SLC, computer or ASCII device
Data length 8 data bits — no parity, 1 stop bit
supporting RS-232 or RS-485 communication.
Environmental
Features Temperature range • Operating: 0 to 60° C (32 to 140° F)
• Storage: -40 to 85° C (-40 to 185° F)
• Multicolor LEDs support red, green or amber colors for Humidity • 5 to 95% (without condensation)
entire messages or individual characters. Color coded Shock • Operating: 15 g
displays provide for easy message recognition. For • Non-operating: 30 g (pulses)
example: Red=Fault, Amber=Warning, Green=Status Vibration • Operating: 1.0 g
• Non-operating: 2.5 g (sinusoidal)
• Selectable character size, display two lines of 5.3 mm
NEMA rating UL Listed for Type 12 and 13. Designed but not
(2.1 in) characters or one line of 122 mm (4.8 in) listed for Type 4 ( indoor use only).
characters Dimensions
• Scrolling displays allow long messages to scroll across cat. no. 2706-F11J, • Height 224 mm (8.8 in)
the display -F11JC (tri-color) • Width 1,026 mm (40.4 in)
• Depth 113 mm (4.5 in)
• Anti-glare, 7 _ Downward Tilted Window provides cat. no. 2706-F21J, • Height 224 mm (8.8 in)
increased visibility form ground level -F21JC (tri-color) • Width 1,930 mm (76 in)
• Depth 113 mm (4.5 in)
• Alarm Relay can provide audible or visual indication of all Shipping Weight
or selected messages, using a connected horn or lamp cat. no. 2706-F11J, -F11JC 18 kg (40 lbs)
• Flashing displays increase operator awareness of cat. no. 2706-F21J, -F21JC 34 kg (75 lbs)
important messages
Ordering Information
• 23 Display Modes offer a wide range of special visual
effects when using duplex protocol, such as wipe down or Description Catalog Number
starburst Red DL50 display, two lines of (20) 53.3 mm (2.1 in)
2706-F11J
characters or one line of (10) 122 mm (4.8 in) characters
• Switch Configuration makes setup easy
Red DL50 display, two lines of (40) 53.3 mm (2.1 in)
2706-F21J
• Fault Isolation LEDs show the DL50 operating status at a characters or one line of (20) 122 mm (4.8 in) characters
glance. Overtemperature LED indicates power reduction Tri-color DL50 display, two lines of twenty
mode, protecting internal circuitry from excessive heat 53 mm (2.1 in) characters or one line of ten 2706-F11JC
122 mm (4.8 in) characters
Tri-color DL50 display, two lines of forty
53 mm (2.1 in) characters or one line of twenty 122 mm 2706-F21JC
(4.8 in) characters
Mounting bracket for back to back or wall mounting.
2706-NJ3
Bracket angle is adjustable.

For accessories, see page 7-15.

7-14
 Selection Charts
Dataliner Message Displays
(Bulletin 2706)

Dataliner Accessories
Series
DL5 DL10 DL20 DL40 DL50 Description Catalog Number
Cables
Programming Cables
DL5, DL40 cable for IBM or compatible computers À (25-pin female), or DEC VT52,
l l VT100, and VT101 terminals (DL5 only) 2706-NC12
l l DL5, DL40 cable for Allen-Bradley 6121, IBM or compatible computers À (9-pin
female) 2706-NC13
l l DL5, DL40 cable for Allen-Bradley 6120 computers (9-pin female) 2706-NC14
l l DL5, DL40 cable for Allen-Bradley industrial terminals T1 through T4 (25-pin male) 2706-NC15
DL20 cable for Allen-Bradley industrial terminals T1 through T4 or most DTE-type
l dumb terminals (male 25-pin D-shell) 2706-NC1
DL20 cable for IBM or compatibles À or DEC VT52, VT100 or VT101 terminals
(female 25-pin D-shell). (Use 25 to 9-pin “AT Adapter” cable with 2706-NC2 for
l 1784-T50 or -T60 industrial terminals or IBM AT computers). 2706-NC2
Tape Loader Cables
l DL20 Data Recorder Interface cable for EPI STR-LINK II or III data recorders. 2706-NC3 Á
l DL20 Data Recorder Interface cable for Allen-Bradley 1770-SB or 1770-SA data 2706-NC4
recorders.
A-B terminals to EPI STR-LINK II or III recorder cable
This cable must be ordered if an A-B industrial terminal and an EPI STR-LINK II or
III data recorder are to be used. It is not needed if either of the programming
l keyboards (cat. nos. 2706-NK1 or -NK2) are being used. 2706-NC5
Development Software
DL5 Development Software
DL5 Off-line Programming Software for IBM or compatible with 5-1/4-inch or
l 3-1/2-inch disk drive À 2706-NP5
DL20 Development Software
DL20 Off-line Programming Software for IBM or compatible with 5-1/4-inch or
l 3-1/2-inch disk drive À 2706-NP3
DL40 Development Software
DL40 Off-line Programming Software for IBM or compatible with 5-1/4-inch or
l 3-1/23-1/-inch disk drive À 2706-ND1
EEPROMs
DL40 Memory Module
l 16K-byte Memory Module 2706-NMM16
l 32K-byte Memory Module 2706-NMM32
l 64K-byte Memory Module 2706-NMM64
Keyboards
DL20
l Standard Keyboard 2706-NK1
l Membrane Keyboard 2706-NK2
À Including Allen-Bradley industrial terminals.
Á Terminal to recorder cable (cat. no. 2706-NC5) is also required when using the EPI STR-LINK II or III data recorders and an Allen-Bradley industrial terminal.
The cable (cat. no. 2706-NC5) is not needed if either of the programming keyboards (cat. nos. 2706-NK1 or -NK2) are being used.

7-15
Selection Charts
Dataliner Message Displays
(Bulletin 2706)

Dataliner Accessories (continued)

Series
Description
escri tio Cata og Number
Catalog u er
DL5 DL10 DL20 DL40 DL50
Addressing Bar
The addressing bar allows switch selection of an address for a DL20 display when multiple
displays are placed on an RS-422 line. One addressing bar is used per DL20 display. If not
used, the DL20 address can be selected when programming the display.
l DL20 series Addressing Bar 2706-NF1
120V Parallel Input Converter
These 120V ac Parallel Input Converters are used with the DL20 and DL40 series displays. The
converters connect to the parallel input port and allow the use of 120V ac input voltages to trigger
l messages.
l l Display-Mounted 120V ac Parallel Input Converter 2706-NG1
Panel-Mounted 120V ac Parallel Input Converter (2 required for DL40) 2706-NG2

DL10, DL20 and DL40 Enclosures

l l l A NEMA Type 12/13 enclosure complete with mounting holes and cut-out for one DL10, DL20 or
l l l DL40 series display. Access door is gasketed
Enclosure for one- or two-line DL20 or DL40 display 2706-NE2
Enclosure for four-line DL10, DL20 or DL40 display 2706-NE1
Note: The add-on parallel input converter (cat. no. 2706-NG1) will not fit on a DL20 display when
it is mounted in this enclosure. Panel-mounted input converter (cat. no. 2706-NG2) must be used
and mounted in a separate enclosure.

Flush Mounting Kits

By ordering a flush mounting kit, you can eliminate the standard bezel supplied with the display,
allowing it to be mounted using the face of your enclosure as a “flush bezel.”
l l Flush Mounting Kit for a one- or two-line DL20 display 2706-NJ1
l l Flush Mounting Kit for a four-line DL10 or DL20 display 2706-NJ2
Keyboard Front Panel Access Kit
Kit contains:
8 pin DIN connector panel mount to 8 pin DIN connector on the back of the DL40
keyboard cable extension
l Panel access cover to deny access to the connectors and maintain NEMA Type 4 2706-NPAK1
RS-232 Front Panel Access Kit
Kit contains:
9-pin D connector panel mount to 9-pin D connector on the back of the DL40
RS-232 cable extension
Panel access cover to deny access to the connectors and maintain NEMA Type 4
l rating 2706-NPAK2
Mounting Bracket
l For back to back mounting of DL50 displays 2706-NJ3

For more information, see the product data publications: Dataliner 120V ac Parallel Input Converters (2706-2.1); Dataliner
DL10 and DL20 Enclosures (2706-2.2); Dataliner Keyboards (2706-2.4), Dataliner Lithium Battery Information (2706-2.7);
Dataliner DL40 Series Pass-Through Option (2706-2.10); Dataliner Cable Diagrams (2706-2.15).

7-16
 Message Displays
DTAM Plus Operator Interface
(Cat. No. 2707 Series)

• Available Class I Div 1 rated LCD display, 11 to 13V dc

powered unit

Specifications Class I Division 1

Class I Division 2

Approximate • Height 193.0 mm (7.6 in)

Dimensions • Width 139.7 mm (5.5 in)
• Depth 45.7 mm (1.8 in)
Front Panel Size • Height 215.9 mm (8.5 in)
• Width 165.1 mm (6.5 in)
Communication • Supports Allen-Bradley DH-485 point-to-point or
network operations to SLC 500 processors
• Supports Allen-Bradley DF1 point-to-point
communication with enhanced PLC-5 processors
• Supports Universal Remote I/O communication to a
PLC-5 processor and to a SLC 500 processor via a
1747-SN remote I/O scanner
The DTAM Plus operator inteface provides an operator • Supports DeviceNet communication to a DeviceNet
interface to PLC-5 and SLC 500 family of processors and to scanner
a DeviceNet scanner. This operator interface features a
Memory • 8K-byte option supports approximately 50
4-line x 20-character display window for viewing data table application screens.
information and operator prompts. Use an offline • 40K-byte option supports approximately 244
Development Software Package to create display screens. application screens.
Screens can depict register information, prompt for operator Display Types
data entry, or facilitate recipe downloading, which let you
modify multiple registers with a single keystroke. Alarm 4-line by • VFD (Vacuum Fluorescent Display)
20-characters • LCD (Liquid Crystal Display)
screens monitor critical data table registers, prompting the
operator for action when out-of-range conditions exist. Operating Voltages
3 Power Supply • P1 Designation
Ranges 15-23V ac, 47-440 Hz
Features 20-30V dc
800 mA max., 1A Fuse
• 4-line x 20-character VFD or backlit LCD display • P2 Designation
85-265V ac, 47-440 Hz
• User-Developed Screens provide menu-type operations, 110-340V dc
prompting an operator to perform specifications, such as 300 mA max., ½A Fuse
data entry or recipe download based on displayed data • P4 Designation
11-13V dc
table information
250mA max. ½A Fuse
• Configurable Communication Port supports DH-485 and
RS-422/RS-232. Use the DH-485 port to communicate For more information, see DTAM Plus Product Data, pub.
with the SLC processor over the DH-485 network or use 2707-2.0.
the RS-422/RS-232 port to communicate with a 1746-BAS For ordering information, see page 7-18.
SLC 500 BASIC Module in an RS-422/RS-232
point-to-point link. Use the RS-232/422 port to
communicate point-to-point DF1 to any of the enhanced
PLC-5 processors through channel 0 or to
upload/download programs
• The Universal Remote I/O version connects to the SLC
remote I/O scanner module or to the PLC-5 processor
through its Universal Remote I/O port
• The DeviceNet version communicates to the DeviceNet
scanner modules
• Standard Printer Port on 40K-byte memory models for
local printing of forms, data, or alarm conditions
• Flash Firmware provides easy downloading of product
enhancements and upgrades
• Bar Code Input capability lets you input ASCII bar code
data using the RS-232 printer port
• SLC or PLC Controlled Screen Changes provide
additional flexibility in screen navigation

7-17
Message Displays
DTAM Plus Operator Interface
(Cat. No. 2707 Series)

Ordering Information

Description Catalog Number

LCD Display, 8K-byte Memory, P1 Power Supply 2707-L8P1
LCD Display, 8K-byte Memory, P2 Power Supply 2707-L8P2
LCD Display, 40K-byte Memory, Printer Port, Real-Time Clock, P1 Power Supply 2707-L40P1
LCD Display, 40K-byte Memory, Printer Port, Real-Time Clock, P2 Power Supply 2707-L40P2
VFD Display, 40K-byte Memory, Printer Port, Real-Time Clock, P1 Power Supply 2707-V40P1
VFD Display, 40K-byte Memory, Printer Port, Real-Time Clock, P2 Power Supply 2707-V40P2
VFD Display, 40K-byte Memory, Printer Port, Real-Time Clock, NEMA Type 4X Rating, P2 Power Supply 2707-V40P2N
Universal Remote I/O, LCD Display, 8K-byte memory, P1 power supply 2707-L8P1R
Universal Remote I/O, LCD Display, 8K-byte memory, P2 power supply 2707-L8P2R
Universal Remote I/O, LCD Display, 40K-byte memory, printer port, real time clock, P1 power supply 2707-L40P1R
Universal Remote I/O, LCD Display, 40K-byte memory, printer port, real time clock, P2 power supply 2707-L40P2R
Universal Remote I/O, VFD Display, 40K-byte memory, printer port, real time clock, P1 power supply 2707-V40P1R
Universal Remote I/O, VFD Display, 40K-byte memory, printer port, real time clock, P2 power supply 2707-V40P2R
Universal Remote I/O, VFD Display, 40K-byte memory, printer port, real time clock, NEMA Type 4X Rating, P2 power supply 2707-V40P2NR
LCD Display, 40K-byte Memory, Real-time Clock, P4 Power Supply, rated Class I Division 1 2707-L40P4
DeviceNet, LCD Display, 8K-byte memory, P1 power supply 2707-L8P1D
DeviceNet, LCD Display, 8K-byte memory, P2 power supply 2707-L8P2D
DeviceNet, LCD Display, 40K-byte memory, printer port, real time clock, P1 power supply 2707-L40P1D
DeviceNet, LCD Display, 40K-byte memory, printer port, real time clock, P2 power supply 2707-L40P2D
DeviceNet, VFD Display, 40K-byte memory, printer port, real time clock, P1 power supply 2707-V40P1D
DeviceNet, VFD Display, 40K-byte memory, printer port, real time clock, P2 power supply 2707-V40P2D
DeviceNet, VFD Display, 40K-byte memory, printer port, real time clock, NEMA Type 4X Rating, P2 power supply 2707-V40P2ND
DH-485 Network Interface Cable interfaces to the Allen-Bradley DH-485 network. 2707-NC1
RS-232 Program Upload/Download Cable connects a personal computer to the DTAM Plus to allow program upload/download. 2707-NC2
DF1 RS-232 Interface Cable interfaces to channel 0 of the PLC-5 processor via RS-232 DF1. 2707-NC3
DF1 RS-422 Interface Cable interfaces to channel 0 of the PLC-5 processor via RS-422 DF1. 2707-NC4
RS-232 Interface Cable for ASCII input 2707-NC6
Off-line Software Development Package (MicroView, DTAM Plus, DTAM Micro) 2707-NP
Off-line Software Development Kit (MicroView) 2707-NP2
Off-line Software Development Package (MicroView, DTAM Plus, DTAM Micro, Siemens AS511 Protocol, Modbus Protocol) 2707-NP3

7-18
 Message Displays
DTAM Micro Operator Interface
(Cat. Nos. 2707-M485P3, -M232P3, -M232P3D, -NP, -NP3)

• File Access Options for SLC controllers include I/O,

status, binary, timer, counter, floating point, and integer
files. Additional options for the PLC-5 include ASCII,
BCD, message and ASCII string files
• SLC and PLC Controlled Screen Changes provide
additional flexibility in screen navigation by using an
Advisor feature

Ordering Information

Description Catalog Number

DTAM Micro with DH-485 communication port 2707-M485P3
DTAM Micro with RS-232 communication port 2707-M232P3
DTAM Micro with DeviceNet communication port 2707-M232P3D
DTAM Programming Software (DTAM Plus, DTAM 2707-NP
Micro, MicroView)
The DTAM Micro operator interface extends the Bulletin
DTAM Programming Software (DTAM Plus, DTAM 2707-NP3
2707 product line of high-performance operator interfaces to Micro, MicroView, Siemens AS511 Protocol, Modbus
the PLC-5 and SLC 500 family of controllers and to Protocol)
DeviceNet scanners. Smaller in size than the DTAM Plus
operator interface, the DTAM Micro operator interface is a
low-cost interface for plant-floor control and data monitoring.
Accessories and Replacement Parts
There are three versions of DTAM Micro operator interface:
• DTAM Micro with RS-232 Port allows point-to-point Description Catalog Number
connections with PLC-5 or SLC 5/03 processors RS-232 to Current Loop Interface Cable - Connects 2707-NC12
DTAM Micro to Siemens AS511 port
• DTAM Micro with DH-485 Port provides for DH-485
point-to-point or network communication with the SLC 500 DeviceNet Interface Cable - Connects DTAM Micro 2707-NC20
to DeviceNet network with bare wires (for taps and
family of controllers open-style connectors)
• DTAM Micro with DeviceNet Port provides for DeviceNet DeviceNet Interface Cable - Connects DTAM Micro 2707-NC21
communication with DeviceNet scanners to DeviceNet network with female sealed micro
connector
DTAM Micro applications are created with the same software DeviceNet Interface Cable - Connects DTAM Micro 2707-NC19
package as other DTAM Plus products, providing to DeviceNet network with male sealed micro
compatibility and a convenient transfer of knowledge within connector
the same product line. DH-485 Network Interface Cable - Connects DTAM 2707-NC1
Micro to SLC network
RS-232 Upload/Download Cable - Connects RS-232 2707-NC2
Features DTAM Micro to RS-232 port of personal computer
DF1/RS-232 Interface Cable - Connects RS-232 2707-NC3
• Two-line x 20-Character Display uses LCD technology DTAM Micro to channel 0 port of PLC-5 processor
with fixed LED backlighting
DF1/RS-422 Interface Cable - Connects DH-485 2707-NC4
• Memory Capability provides storage for up to 244 data DTAM Micro to channel 0 port (configured for
display, data entry, recipe and alarm screens, and RS-422) of PLC-5 processor
configuration data DH-485 Upload/Download Cable - Connects DH-485 2707-NC5
DTAM Micro to RS-232 port of personal computer
• Recipe Operations let operators quickly modify blocks of RS-232 Programmer Cable - Connects RS-232 1747-CP3
data. Each recipe screen can download data to 10 DTAM Micro to channel 0 port of a SLC 5/03 or 5/04
non-sequential addresses. Linking screens lets operators processor
download a recipe to additional addresses 120V ac Power Supply - Provides 18 to 30V dc 1747-NP1
output
• Membrane Keypad has 26 color-coded keys for easy
identification of key functions 85/285V ac Power Supply - Provides 18 to 30V dc 1747-NP2
output
• Eight Function Keys provide operators a convenient way
to trigger screen displays and control screen navigation.
Operators can also use the function keys to set or clear For specifications, see page 7-20.
data table bits
• Point-Access/Display Feature lets operators monitor or
modify data files in SLC or PLC processors, regardless of
the programmed screen

7-19
Message Displays
DTAM Micro Operator Interface
(Cat. Nos. 2707-M485P3, -M232P3, -M232P3D, -NP, -NP3)

Specifications Class I Div 2 Hazardous

Display
Type LCD (Liquid Crystal Display) with LED backlighting
Column and 2 lines x 20 characters
character
Character size 4.75 x 2.95 mm (0.19 x 0.12 in)
Character format 5 x 8 mm dot matrix
Contrast Fixed
Display viewing 25 x 76 mm (1.0 x 3.0 in)
area
Viewing angle Horizontal ± 30°, Vertical -20° to +30°
Keypad
Type Tactile-embossed, domed keys, sealed membrane
Operation force: 453 grams (16 oz)
Operational life 1 million operations
Electrical
Communication • RS-232
port • DH-485
• DeviceNet
Input voltage • 2707-M232P3, -M485P3: 18-30V dc
range • 2707-M232P3D: 11-25V dc
Input current • 2707-M232P3, -M485P3: 200 mA maximum
• 2707-M232P3D: 215 mA maximum
Mechanical
Front panel size
Height 137.2 mm (5.4 in)
Width 175.3 mm (6.9 in)
Back Dimensions
Height 99.1 mm (3.9 in)
Width 137.2 mm (5.4 in)
Depth 45.7 mm (1.8 in)
Weight 0.45 kg (1.0 lb) maximum
LED indicator RUN (green)
Environmental
Operating 0 to 55° C (32 to 131° F)
temperature
Storage -20 to 70° C (-4 to 158° F)
temperature
Relative humidity 5 to 95%, (without condensation)
Shock 30 g (operating)
Vibration 50 g (non-operating)
Certifications NEMA Type 4, 12, 13 (indoor)
Class I Division 2
For more information, see DTAM Micro Operator Interface
Product Data, publication 2707-2.3.

7-20
 Message Displays
MicroView Operator Interface
(Cat. Nos. 2707-MVH232, -MVH232D, -MVP232, -MVP232D, -NP2, -NP)

Specifications Class I Div 2 Hazardous

Display
Type LCD (Liquid Crystal Display) with yellow/green LED
backlighting
Column and Two-line by 16 characters
character
Character size 5.6 x 3 mm (0.22 x 0.12 in)
Character format 5 x 7 mm dot matrix
Contrast Fixed
Display viewing 15 x 60 mm (0.6 x 2.4 in)
area
Viewing angle Horizontal ± 30°, Vertical -20° to +30°
Keypad
Type Tactile-embossed, domed keys, sealed membrane
MicroViewt Operator Interface is designed to communicate Operation force: 453 grams (16 oz)
to the Allen-Bradley MicroLogixt family of processors using
Operational life 1 million operations
the RS-232 DF1 protocol and to a DeviceNet scanner using
the DeviceNet protocol. Smaller in size than the DTAM Electrical
Microt operator interface, the MicroView operator interface Communication • RS-232
is designed for the OEM that wants a low-cost operator port • DeviceNet
interface for plant-floor control and data monitoring. Input voltage range 11 to 25V dc
The programming software simplifies the creation of linked Input current 1.5 W maximum (RS-232),
screens including data display, data entry, and recipe 1.8 W maximum (DeviceNet)
screens. Recipe screens let operators download blocks of Mechanical
data. MicroView programming software is available
MicroView hand-held operator interface
specifically for the MicroView operator interface or as a
subset of the DTAM family programming software. Height 129.5 mm (5.1 in)
Width 90.2 mm (3.6 in)
Depth 25.4 mm (1.0 in)
Features
MicroView panel-mount operator interface
• MicroView operator interface supports RS-232 DF1 Height 149.9 mm (5.9 in)
(point-to-point) communication with the Allen-Bradley
family of MicroLogix controllers and supports DeviceNet Width 119.4 mm (4.7 in)
communication with a DeviceNet scanner Depth 25.4 mm (1.0 in)

• Compact size lets you use the MicroView operator Panel-mount adapter
interface in areas of limited space Height 193.6 mm (7.6 in)

• Panel Mount Adapter with connector allows the hand-held Width 119.4 mm (4.7 in)
version of the MicroView operator interface to be easily Depth 38.1 mm (1.5 in)
removed for programming or replacement. All wiring is to Environmental
the adapter, simply plug the MicroView operator interface
into the adapter Operating 0 to 55° C (32 to 131° F)
temperature
• Point-Access /Display Feature lets operators modify data Storage -20 to 70° C (-4 to 158° F)
files in MicroLogix controllers, independently of temperature
programmed screens
Relative humidity 5 to 95%, (without condensation)
• Standard File Access Options for MicroLogix controllers Shock 30 g (operating)
include I/O, status, binary, timer, counter, control and 50 g (non-operating)
integer files
• Memory Capability allows storage for up to 50 application
screens and configuration data
• 2 Function Keys provide a quick and convenient way to
automatically trigger screen displays and control screen
navigation. Also, the function keys can be used to set or
clear data table bits

7-21
Message Displays
MicroView Operator Interface
(Cat. Nos. 2707-MVH232, -MVH232D, -MVP232, -MVP232D, -NP2, -NP)

Ordering Information
MicroView Operator Interface and Software
Description Catalog Number
MicroView Operator Interface, Hand-held 2707-MVH232
MicroView Operator Interface, Panel Mount 2707-MVP232
MicroView Operator Interface, Hand-held, DeviceNet 2707-MVH232D
MicroView Operator Interface, Panel-Mount, DeviceNet 2707-MVP232D
MicroView Programming Software 2707-NP2
DTAM Programming Software (MicroView, DTAM Plus, DTAM Micro) 2707-NP

Accessories and Replacement Parts

Description Catalog Number
Panel Mount Adapter 2707-MVMNT
RS-232 Upload/Download Cable – connects MicroView to RS-232 Port of a personal computer 2707-NC8
Communication Cable (15 meter) – connects MicroView to MicroLogix Controller 2707-NC9
Communication Cable (2 meter) - connects DTAM Micro to MicroLogix Controller 2707-NC10
Communication Cable (2 Meter) – connects MicroView to MicroLogix controller 2707-NC11
Communication Cable with bare wires (1 meter) - connects MicroView to DeviceNet network 2707-NC13
Communication Cable with female microconnector (1 meter) - connects MicroView to DeviceNet 2707-NC14
network
Communication Cable with male microconnector (1 meter) - connects MicroView to DeviceNet 2707-NC15
network
120V ac Power Supply – provides dc output for application transfers 1 2707-PS120
220V ac Power Supply – provides dc output for application transfers 1 2707-PS220
1 Power supply is not required for standard operation. MicroLogix controller provides 24V dc to the MicroView operator
interface via communication cable.

7-22
 Message Displays
DeviceView Configurator
(Cat. Nos. 2707-DNC, -DP1)

Specifications Class I Div 2 Hazardous

Display type LCD with Yellow-Green LED Backlighting

Column and character 2 lines x 16 characters
Character size 5.56 x 2.96 mm
(0.22 x 0.12 in)
Viewing area 15mm x 60 mm (0.58 x 2.35 in)
Viewing angle Horizontal 30°
Vertical –20 to + 30°
Keypad Tactile embossed, domed keys, sealed
membrane
Operation Force:
• 453 gm (16 oz)
• Operational Life: 1 million operations1
Communication • RS-232 communication port
• RS-232 communication distance: 15m (50 ft)
maximum
• DeviceNet (selectable 125k, 250k,
The DeviceView Configurator configures and troubleshoots 500k bit/s)
DeviceNet products ranging from photoeyes to drives. Electrical Input voltage range: 11-25V dc
The DeviceView Configurator can be powered from 120V ac, Input power, typical: 1.8 W
220V ac, or from the network. Input current:
• 164mA @ 11V
The DeviceView Configurator has multiple modes that can • 72mA @ 25V
leverage the use of EDS files, can streamline initial node Environmental Operating temperature: 0° to 55° C
commissioning, and can even configure devices that have no (32° to 131° F)
EDS file or other documentation. Storage temperature: –20° to 70° C
(-4° to 158° F)
Humidity: 5 to 95% (without condensation)
Shock:
Features • Operating 30g
• Node Commissioning Mode lets the user assign a • Non-operating 50g
communication rate and node address to a device to get it Dimensions Height 129.5 mm (5.1 in)
running in a few seconds. Width: 90.2 mm (3.55 in)
Depth: 24.8 mm (0.975 in)
• Enhanced Mode leverages the use of a vendor-supplied Weight 0.2 kg (0.44 lb)
EDS file. Each parameter is labeled, so that even the
Communication connection 8-pin female C DIN connector
novice user can edit device attributes.
• Basic Mode enables the user to access the network and
device attributes without a vendor-supplied EDS file.
Ordering Information

• Autobaud automatically sets the DeviceView Description Catalog Number

Configurator communication rate to match the rate of the DeviceView Configurator 2707-DNC
DeviceNet network when the configurator is connected DeviceView Downloader Software 2707-DP1
to it. 1 meter Network cable with bare leads 2707-NC13
• Flexible Power Supplies lets the DeviceView 1 meter Network cable with Micro-connector (female) 2707-NC14
Configurator function with input power of 120 or 220V ac, 1 meter Network cable with Micro-connector (male) 2707-NC15
or 24V dc supplied by the DeviceNet network. Upload/download cable 2707-NC8
120V ac power supply, ac to dc adapter 2707-PS120
• Menu-Driven Functions help the user operate the
DeviceView Configurator efficiently and quickly. 220V ac power supply, ac to dc adapter 2707-PS220

• Display presents information that guides the user through

the menu system. Symbols in the display indicate whether
the DeviceView Configurator is Online or Offline or if there
is a problem with the connection.
• Downloader Software lets the user download EDS files
into the configurator’s flash memory.
• Flash Memory holds up to 31 EDS files, depending on
file sizes. When flash memory is full, the user can delete
selected files to make room for new ones.

7-23
Electronic Push-Button Modules
RediPANEL Operator Modules
(Cat. No. 2705 Series)

Types
RediPANEL products are available as described below:
• Standard units
• Standard units with options
• Custom units
Standard units and standard units with options are covered in
this catalog.
Custom units allow the specific type of push-button device in
the panel to be specified. Depending on the type of
RediPANEL base unit, illuminated or non-illuminated push
buttons, selector switches and pilot lights can be specified.
Custom panel ordering and pricing is explained in publication
2705-3.3.

RediPANEL Operator Modules eliminate the time and RediPANEL table of contents Page
expense of installing and wiring individual push buttons. Push-Button Universal Remote I/O Products 7-25
They combine an assortment of push buttons, keypads, Membrane 7-25
displays, wiring combinations, I/O modules, power supplies, 800A 7-26
and/or network interfaces, all into one single, pre-packaged 800EM 7-28
ready-to-use unit.
800EP 7-30
They are a quick, economical way to simplify panel Keypad Products 7-32
fabrication from design through testing. Plug & Go Cable Connection Products 7-33
Accessories 7-34

Features
Many RediPANEL products are available for different
applications. They can be grouped into the following general
categories:
Push-Button I/O Panels — Use a Universal Remote I/O link
to connect Membrane, 800A, 800EM, or 800EP push buttons
to PLC or SLC systems.
Keypad Panels — Use a Universal Remote I/O link to
connect alphanumeric display, data entry keypad, function
key inputs, and LED indicators to PLC or SLC systems.
Plug & Go Panels — Use parallel cables to connect 800A
push buttons to PLC or SLC I/O modules.

Specifications
The following information is listed for each product:
• NEMA (and IEC) listing
• Temperature range
• Humidity range
• Voltage and frequency range
• Communication type
All products are UL listed for Hazardous locations Class I,
Division 2, Groups A, B, C, and D.

7-24
 Electronic Push-Button Modules
RediPANEL Operator Modules
Push-Button Universal Remote I/O Products

The Bulletin 2705 Push-Button RediPANEL modules are

equipped with either Membrane, 800A, 800EM, or 800EP
push button devices used in conjunction with various
combinations of interface circuitry, power supplies, and
network circuitry. Almost every conceivable push button
operator interface application can be met with the large
variety of sizes, types of operators, and environmental
ratings available.

Membrane
The Membrane RediPANEL modules can be used for many
applications. The panel features 16 membrane switches in a
single unit, protecting against airborne materials. Membrane
panels also have 16 red LED indicators. The panels are
approved for NEMA Type 4X (IP66) indoor applications.
Legend inserts for membrane switches are available in red,
green, amber, blue, and white.

Specifications
Item Description
Standard push buttons Membrane
NEMA (IEC) rating Type 4/4X indoor only (IP66)
Temperature range
Operating 0 to 60_ C (+32 to +140_ F)
Storage -40 to 85_ C (-40 to +184_ F)
Humidity 5 to 95% (without condensation)
120/240V ac, 50/60 Hz (range 85 to 264V ac)
Power Supply
Option: 24V dc (range 18 to 30V dc)
Communication Universal Remote I/O (selectable 57.6k, 115.2k, 230.4k bit/s)

Membrane RediPANEL Standard Units

Item Description Catalog No.

16 Membrane Buttons
2705-P21C1
with 16 Red LEDs

Selection Configurator

2705 – P21 C1
a b

a b
Type of Unit Power Supply
Code Description Code Description
P21 16 Button Membrane C1 120/240V ac (Standard)
C2 24V dc
7-25
Electronic Push-Button Modules
RediPANEL Operator Modules
Push-Button Universal Remote I/O Products

800A
These compact push-button RediPANEL modules use
16 mm 800A Backlit push buttons in 8-, 16-, or 32-button
units. They are ideal for light industrial or instrument grade
applications.

Specifications
Item Description
800A Backlit Push Buttons
8-button unit — 800A-C2Dj 12
Standard push buttons
16-button unit — 800A-C2D j12
32-button unit — 800A-C2C j12
NEMA (IEC) rating Type 12/13 (IP65)
Temperature range
Operating 0 to 45_ C (32 to 113_ F)
Storage -40 to 85_ C (-40 to 184_ F)
Humidity 5 to 95% (without condensation)
120/240V ac, 50/60 Hz (range 85 to 264V ac)
Power Supply
Option: 24V dc (range 18 to 30V dc)
Communication Universal Remote I/O (selectable 57.6k, 115.2k, 230.4k bit/s)

800A RediPANEL Standard Units

Item Description Catalog No.

8 Buttons
Standard button
configuration: 2705-P31J1
4 Green
4 Red

16 Buttons
Standard button
configuration:
2705-P21J1
6 Green
6 Red
4 Amber

7-26
 Electronic Push-Button Modules
RediPANEL Operator Modules
Push-Button Universal Remote I/O Products

800A (continued)

800A RediPANEL Standard Units (continued)

Item Description Catalog No.

32 Buttons
Standard button
configuration:
8 Green 2705-P11J1
8 Red
8 Amber
8 White

Selection Configurator

2705 – P31J 1
a b c

a
Type of Unit
Code Description
P31J 8-Button Unit
P21J 16-Button Unit
P11J 32-Button Unit
P32J 8-Button Class-I Division-2 Unit
P22J 16-Button Class-I Division-2 Unit
P12J 32-Button Class-I Division-2 Unit

b
Power Supply
Code Description
1 120/240V ac (Standard)
2 24V dc

c
Lamps
Code Description
Blank Incandescent (Standard)
8 Button LED (Type, 4 Green, 4 Red)
16Button LED (6 Green, 6 Red,
L 2-Green - 2 Red)
32 Button LED (16 Green, 8 Red, 8 Amber)

7-27
Electronic Push-Button Modules
RediPANEL Operator Modules
Push-Button Universal Remote I/O Products

800EM
These RediPANEL modules use rugged 22.5 mm 800EM
push buttons and are ideal for many industrial applications.

Specifications
Item Description
Standard push buttons 800EM Illuminated Push Buttons, 800EM-LF-4DL3X10V
NEMA (IEC) rating Type 12/13 (IP65)
Temperature range
Operating 0 to 40 _ C (+32 to 104_ F)
Storage -40 to 85_ C (-40 to 184_ F)
Humidity 5 to 95% (without condensation)
120/240V ac, 50/60 Hz (range 85 to 264V ac)
Power Supply
Option: 24V dc (range 18 to 30V dc)
Communication Universal Remote I/O (selectable 57.6k, 115.2k, 230.4k bit/s)

800EM RediPANEL Standard Units

Item Description Catalog No.

16 Buttons
Standard
Button Configuration:
2705-EM21J1
6 Green
6 Red
4 Amber

32 Buttons
Standard
Button Configuration:
2705-EM11J1
16 Green
8 Red
8 Amber

7-28
 Electronic Push-Button Modules
RediPANEL Operator Modules
Push-Button Universal Remote I/O Products

800EM (continued)

Selection Configurator
2705 – EM2 1 J 1
a b c d e
a
Type of Unit
Code Description
EM2 16-Button Unit
EM1 32-Button Unit

b
Push Buttons
Code Description
1 800EM Illuminated Push Buttons (std.)1
1 Custom configuration is available. Contact your local
sales office.

c
Mounting
Code Description
J Units mounted on front plate (standard)
Units mounted in NEMA Type 12/13 enclosure —16 button
J
JE
Units mounted in NEMA Type 12/13 enclosure — 32 button

d
Power Supply
Code Description
1 120/240V ac (Standard)
2 24V dc

e
Lamps (800E Type)
Code Description
Blank Incandescent (Standard)
16 Button LED (6 Green, 6 Red,
L 2 Green - 2 Red)
32 Button LED (16 Green, 8 Red, 8 Amber)

7-29
Electronic Push-Button Modules
RediPANEL Operator Modules
Push-Button Universal Remote I/O Products

800EP
These RediPANEL operator modules use quality 800EP
push buttons in 16- or 32-button units. RediPanels are ideal
for industrial applications with harsh environments, such as
caustic washdown and salt spray.

Specifications
Item Description
Standard push buttons 800EP Backlit Push Buttons
NEMA (IEC) rating Type 4/4X (IP66)
Temperature range
Operating 0 to 40_ C (32 to 104_ F)
Storage -40 to 85_ C (-40 to 184_ F)
Humidity 5 to 95% (without condensation)
120/240V ac, 50/60 Hz (range 85 to 264V ac)
Power Supply
Option: 24V dc (range 18 to 30V dc)
Communication Universal Remote I/O (selectable 57.6k, 115.2k, 230.4k bit/s)

800EP RediPANEL Standard Units

Item Description Catalog No.

16 Buttons
Standard
Button Configuration:
6 Green 2705-EP21SE1
6 Red
4 Amber
Fiberglass enclosure

32 Buttons
Standard
Button Configuration:
16 Green 2705-EP11S1
8 Red
8 Amber
Stainless steel faceplate

7-30
 Electronic Push-Button Modules
RediPANEL Operator Modules
Push-Button Universal Remote I/O Products

800EP (continued)

Selection Configurator
2705 – EP2 1 S 1
a b c d e

a
Type of Unit
Code Description
EP2 16-Button Unit
EP1 32-Button Unit

b
Push Buttons
Code Description
1 800EP Backlit Push Buttons (std.)1
1 Custom configuration is available. Contact your local sales office.

c
Mounting
Code Description
Units mounted on front plate (standard)
S
stainless steel
Units mounted in NEMA Type 4/4X reinforced
polycarbonate enclosure — 16 button
SE
Units mounted in NEMA Type 4/4X reinforced
polycarbonate enclosure — 32 button

d
Power Supply
Code Description
1 120/240V ac (Standard)
2 24V dc

e
Lamps (800E Type)
Code Description
Blank Incandescent (Standard)
16 Button LED (6 Green, 6 Red, 2 Green - 2 Red)
L
32 Button LED (16 Green, 8 Red, 8 Amber)

7-31
Electronic Push-Button Modules
RediPANEL Operator Modules
Keypad Products

Bulletin 2705 Keypad RediPANEL modules combine an • Message storage and editing
assortment of push-button inputs, LED indicators, numeric
• Self-test diagnostics
keypads, and alphanumeric displays in conjunction with a
power supply and network interface. • Variable or fixed decimal point
These combinations of operator inputs and display outputs An optional Off-line Keypad Programming Software Package,
combine discrete push buttons and operators with an for message development, off-line storage, and transfer with
economical and easily understood operator interface for an IBM compatible personal computer, is offered.
applications that require some numeric value input and/or
display outputs. The Keypad panel, designed to interface with a PLC program
for data monitoring or control change functions, consists of a
Keypad modules are rated as NEMA Type 4X. Other one-line 16-character 14-segment alphanumeric vacuum
significant features include: fluorescent display with a membrane keypad. The keypad
includes a numeric keypad, 6 Function keys with red LED
• Selectable data types: binary, integer, BCD, or ASCII
indicators, one Enter key, and one Delete key.

Specifications
Item Description
NEMA (IEC) rating Type 4/4X (IP66)
Temperature range
Operating 0 to 60_ C (+32 to 140_ F)
Storage -40 to 85_ C (-40 to 184_ F)
Humidity 5 to 95% (without condensation)
120/240V ac, 50/60 Hz (range 85 to 264V ac)
Power Supply
Option: 24V dc (range 18 to 30V dc)
Communication Universal Remote I/O (selectable 57.6k, 115.2k, 230.4k bit/s)

Keypad RediPANEL Standard Equipment

Item Description Catalog No.

Keypad Panel 2705-K11C1

Keypad Programming
Software [interface
2705-ND1
included (RS-232 to
keyboard)]

Selection Configurator

2705 – K11 C1
a b

a b
Type of Unit Power Supply
Code Description Code Description
K11 NEMA 4/4X (Indoor) Unit C1 120/240V ac (Standard)
K12 Class I Division 2 Unit C2 24V dc
7-32
 Electronic Push-Button Modules
RediPANEL Operator Modules
Plug & Go Cable Connection Products

The Bulletin 2705 Plug & Go RediPANEL modules combine

LED illuminated Bulletin 800A push buttons in a
pre-assembled operator interface unit. When used with
Bulletin 1492 Wiring System cables and high-density PLC or
SLC I/O Modules, Plug & Go RediPANEL products are a
simple and cost-effective solution for operator interface
needs.

Specifications
Item Description
800A Backlit push buttons
Standard push
16 button unit — 800A-C2Dj4L
buttons
32 button unit — 800A-C2Cj4L
NEMA (IEC) rating Type 12/13 (IP 65)
Temperature range
Operating -20 to 45_ C (-4 to +113_ F)
Storage -40 to 85_C (-40 to +184_ F )
Humidity 5 to 95% (without condensation)
Power Supply 24V dc "10%
Communication 1492 Wiring System cables to PLC or SLC I/O modules1
1 See Plug & Go Accessories (page 7-34) for cable catalog numbers.

Plug & Go RediPANEL Standard Units

Item Description Catalog No.

16 Buttons
Standard
Button Configuration:
2705-APG16
6 Green
6 Red
2 Red - 2 Green

32 Buttons
Standard
Button Configuration:
8 Green 2705-APG32
8 Amber
8 Red
8 Green

Selection Configurator

2705 – APG16
a

a
Type of Unit
Code Description
APG16 16 Button Unit
APG32 32 Button Unit

7-33
Electronic Push-Button Modules
RediPANEL Operator Modules
Accessories

Plug & Go Accessories

Bulletin 1492 Wiring System cables are used to connect the Plug & Go RediPANEL products to either the PLC or SLC I/O
Modules.
The compatible cables are listed below.
Cata og Number
Catalog u er P C C
PLC/SLC Connects
Co ects To Cata og Number
Catalog u er
2705-APG16 Input Module 1492-CABLEÀF
PLC
(16 Button) Output Module 1492-CABLEÀF
2705-APG32 Input Module 1492-CABLEÀJ
PLC
(32 Button) Output Module 1492-CABLEÀL
2705-APG16 Input Module 1492-CABLEÀB
SLC
(16 Button) Output Module 1492-CABLEÀE
2705-APG32 Input Module 1492-CABLEÀH
SLC
(32 Button) Output Module 1492-CABLEÀH
À Cables are available in 1.0m, 2.5m, and 5.0m lengths. To order cable, insert the
following length code into the the catalog number: 10=1.0, 25=2.5, and 50=5.0m.
For example, 1492-CABLE25H is a 2.5m cable for I/O module 1746-OB32 or
1746-IB32.

Membrane Accessories
Description Type Catalog No.
one insert sheet each of green, red, blue, yellow, and white 2705-N3
five blue insert sheets 2705-N3B
Membrane Push Button Module Legend five red insert sheets 2705-N3R
Kit — Includes 5 sheets of inserts five green insert sheets 2705-N3G
five yellow insert sheets 2705-N3Y
five white insert sheets 2705-N3W
Mounting Straps (for series E or earlier) two replacement mounting straps 46703-398-51

800A Accessories
Description Type Catalog No.
Includes three alignment fixtures and a Bulletin 800A locking
wrench. Each fixture will align the pins on 8, 16, or 32 Bulletin
Modification/Replacement Kit — This kit is used to replace Bulletin
800A devices with the PC board sockets. RediPANEL push
8
800A devices in the Bulletin 2705
7 5 RediPANEL push button panels to 2705-N1
7 5-
button panels may be modified with any combination of
meet specific customer requirements.
illuminated push buttons or 2 position selector switch 800A
devices.
Lamp Tool — Packaged with each panel Lamp installation and removal tool 800M-N5
Replacement Lamps — Incandescent 12V ANSI #73 incandescent lamps 800M-N16
Red, replacement lamps 800T-N61R
Replacement Lamps — 12V dc LED 1 Green, replacement lamps 800T-N61G
Amber, replacement lamps 800T-N61A
Incandescent
ca desce t to LED Co Conversion
versio Kits
its — Changes the printed 8-button panel conversion kit 2705-NLU3
circuit board with sockets to allow conversion from Incandescent to 16-button panel conversion kit 2705-NLU2
LED lamps. 32-button panel conversion kit 2705-NLU1
Mounting Straps (for series D or earlier) two replacement mounting straps 46703-398-51
1 LED replacement bulbs should only be used with LED panels.

800EM/EP Accessories
Description Type Catalog No.
Lamp Tool — Packaged with each panel Lamp installation and removal tool 800E-ALR1
Replacement Lamps — Incandescent 24V ANSI #757 incandescent lamps 800E-N157
Red, replacement lamps 800E-N157R
Replacement Lamps — 24V dc LED 1 Green, replacement lamps 800E-N157G
Amber, replacement lamps 800E-N157A
1 Sold in multiples of 5.

7-34
 Electronic Push-Button Modules
DeviceNet RediSTATION Operator Interface
(Cat. Nos. 2705-T3DN1A42A, -T3DN1B42A)

Ordering Information

Description Catalog Number

Standard configuration (stop push button, start push 2705-T3DN1A42A
button, pilot light) with mini DeviceNet connector
Standard configuration (stop push button, start push 2705-T3DN1B42A
button, pilot light) with open-style DeviceNet terminal
connector
Three-hole custom configuration with mini DeviceNet 2705-T3DN1A42X
connector
Three-hole custom configuration with open-style 2705-T3DN1B42X
DeviceNet terminal connector
DeviceNet interface communication board [with I/O 2705-DN42
connector cables and DeviceNet PCB terminal block
connector, (4) 24V dc input, (2) 24V dc output] with
open-style DeviceNet terminal connector

The DeviceNet RediSTATION operator interface is a

push-button, pilot-light, and selector-switch unit that can
communicate on the DeviceNet network.

Features Class I Div 2 Hazardous

DeviceNet features are:
• Quick error-proof connection with mini quick disconnect
• Indication of network operation, panel operation, and
burned out or missing bulb
• Switch configuration of node address, communication
rate, flashing-pilot-light frequency
• Input status on state of outputs normal or flash from
network
DeviceNet RediSTATION operator interface features are:
• Three 800T devices in a pre-assembled three-hole station
or “build your own”
• Open-style that accommodates most standard push
buttons, selector switches, or pilot lights that may be used
in any position
• Flash option on pilot-light output

7-35
Graphic Terminals
PanelView 900 and PanelView 550 Operator Terminals and Software
(Cat. No. 2711 Series)

The PanelView 900 Operator Terminals provide operator Features

interface capabilities in space-saving, flat-panel designs.
• Keypad or Touch Screen terminals offer convenient and
Offering optimum viewing angles, these electronic operator
flexible choices for operator input. Operators enter input
interfaces feature pixel graphics and high-performance
using 16 configurable function keys and a numeric
functionality in both color and monochrome displays.
keypad or by simply selecting graphic symbols on a touch
Performance functionality including enhanced alarms, screen.
floating-point support and on-line printing maximizes • Pixel Graphic Display enhances operator screens.
performance strengths within the small form factor. Available in both color and monochrome displays, the 900
PanelBuilder 900 Configuration Software (cat. no. 2711-ND3) terminals are designed with display technologies offering
supports the full range of PanelView flat-panel products, minimal depth with maximum view angles.
allowing easy conversion and reuse of previously created The 8.4 inch color VGA display features active matrix thin
applications. To simplify application design and reduce film transistor (TFT) technology and the monochrome
development costs, the PanelBuilder 900 software uses the version offers a 9.8 inch AC gas plasma display with
graphical interface of the MicrosoftR Windowst operating 640 x 400 resolution.
system.
• Full Complement of Operator Devices to create screens
Screen configuration is easy using such tools as symbols, including push buttons, selectors, numeric entry devices,
objects, graphics, and imported bitmap images. Cut, copy, diagnostic indicators, message displays, embedded
paste and tag import/export capabilities in and between numeric and ASCII variable displays, custom graphics
various PanelView 900 applications offer additional time and more.
saving advantages.
• Extensive Alarm Capabilities include an Alarm History to
Available in three versions, PanelView 900 terminals are record and display important data on triggered alarms,
ideal for both PLC and SLC controller applications. with additional options for printing or clearing the History.
• Remote I/O Terminal – connects to a PLC or SLC 1 Alarm Banner notifies the operator when an alarm occurs
controller on the Universal Remote I/O link, supporting by displaying a message and buttons for responding to
both discrete and block transfer of data. Remote I/O the alarm. Depending on how the application is designed,
terminal supports remote I/O pass-through. the operator can acknowledge all alarms, a single alarm,
• DH-485 Terminal – connects to a single SLC 500 print an alarm, or clear an alarm.
processor or multiple SLC 500 processors on the • Optional RS-232 Printer Port lets the operator print
Allen-Bradley DH-485 network. Direct access to all SLC alarms, the alarm history, triggered messages, and
500 data files minimizes ladder logic. The DH-485 triggered states of a multistate indicator.
terminal supports DH-485 point-to-point or network
transfers, and it supports the MicroLogix 1000 controllers. • Replaceable Backlight makes field replacements easy
• RS-232 Terminal – connects directly to the Channel 0 Port and extends the life of the PanelView 900 color terminals.
of an SLC 5/03 or 5/04 controller using DH-485 protocol. The monochrome PanelView 900 terminal has an
The RS-232 terminal provides a dedicated DH-485 emissive display and does not require a backlight source.
connection for high-priority data. The RS-232 terminal For specifications, see page 7-38.
supports Pass-through from the DH+ network to the
PanelView 900 through Port 0 of an SLC 5/04 controller, For ordering information, see page 7-39.
and it supports the MicroLogix 1000 controller. For PanelView 550 information, see page 7-37.
1 Requires 1747-SN scanner, series A or B.

7-36
 Graphic Terminals
PanelView 900 and PanelView 550 Operator Terminals and Software
(Cat. Nos. 2711 Series)

The PanelView 550 Operator Terminal provides a Features

high-performance operator interface in a small, flat-panel
design. Using the latest operator interface technology, the • Keypad or Combination Touch Screen and Keypad
PanelView 550 terminal is optimized for value and terminals offer convenient and flexible choices for
ease-of-use. operator input. Operators enter input using 10
configurable function keys and a numeric keypad or by
Performance functionality including enhanced alarms, simply touching graphic symbols on a touch screen.
floating-point support, and online printing maximizes
performance strengths within the small form factor. • Pixel Graphic Display enhances operator screens. The
flat-panel, LCD display has 256 x 128 pixel resolution.
PanelBuildert 550 Configuration Software (cat. no.
2711-ND2) takes advantage of the Microsoft Windows • Full Complement of Operator Devices to create screens
graphical interface, simplifying application design and including push buttons, selectors, numeric entry devices,
reducing development costs. diagnostic indicators, message displays, embedded
numeric and ASCII variable displays, custom graphics
Screen configuration is easy using preconfigured symbols,
and more.
dynamic objects, graphics and imported bitmaps. Other
convenient features include the ability to copy screens and • Extensive Alarm Capabilities include an Alarm History to
objects between DH-485 and Universal Remote I/O record and display important data on triggered alarms,
applications and the compatibility of PanelBuilder 550 with additional options for printing or clearing the History.
software with other Microsoft Windows applications.
Alarm Banner notifies the operator when an alarm occurs
An upgrade utility is available to upgrade PanelBuilder 550 to by displaying a message and buttons for responding to
PanelBuilder 900 software allowing you to create the alarm. Depending on how the application is designed,
applications for both the PanelView 550 and 900 terminals the operator can acknowledge all alarms, a single alarm,
with complete compatibility between both (cat. no. print an alarm, or clear an alarm.
2711-ND2ND3).
• Optional RS-232 Printer Port provides the operator with
Like the PanelView 900 terminal, the PanelView 550 terminal the ability to print alarms, the alarm history, triggered
is available in three versions, supporting communication with messages and triggered states of a multistate indicator.
PLC or SLC applications.
• Remote I/O Terminal connects to a PLC or SLC 1 • Field Replaceable Backlight extends lifetime of terminal
controller on the Universal Remote I/O link, supporting and maximizes system up time.
both discrete and block transfer of data. The remote I/O • Transfer Applications between your computer and a
terminal supports remote I/O pass-through. PanelView 550 terminal using a serial connection, DH-485
• DH-485 Terminal connects to a single SLC 500 processor network connection, pass-through from a computer on the
or multiple SLC 500 processors on the Allen-Bradley Allen-Bradley DH+ network, or a PC memory card. The
DH-485 network. Direct access to all SLC 500 data files memory card facilitates transfers on the plant floor without
minimizes ladder logic. The DH-485 terminal supports a computer.
DH-485 point-to-point or network transfers, and it supports For specifications, see page 7-38.
the MicroLogix 1000tcontroller.
For ordering information, see page 7-39.
• RS-232 Terminal connects directly to the Channel 0 port
of an SLC 5/03 or 5/04 controller using DH-485 protocol.
The RS-232 terminal provides a dedicated DH-485
connection for high-priority data. The RS-232 terminal
supports pass-through from the DH+ network to the
PanelView 550 through Port 0 of an SLC 5/04 controller,
and it supports the MicroLogix 1000tcontroller.
1 Requires 1747-SN scanner, series A or B.

7-37
Graphic Terminals
PanelView 900 and PanelView 550 Operator Terminals and Software
(Cat. No. 2711 Series)

Specifications Class I Div 2 Hazardous

PanelView 900 PanelView 900 PanelView 550

Color Display Monochrome Display Monochrome Display
Display
Type Active Matrix Thin Film Transistor (TFT) AC Gas Plasma Liquid Crystal Display (LCD)
Size VGA 640 x 480 pixels 640 x 400 pixels 256 x 128 pixels
171
7 mm (w) x 130 mm (h) 210 mm (w) x 131 mm (h) 122 mm (w) x 66 mm (h)
6 7 in. (w) x 5.12
6.73 5 in. (h) 8 7 in. (w) x 5.17
8.27 5 7 in. (h) 4.88 in. (w) x 2.66 in. (h)
Replaceable Backlight Field-replaceable backlight Not required – emissive display Field-replaceable backlight
Touch Cells (touch screens) 384 384 128
Application Memory 240K-byte Flash (application screens) 240K-byte Flash (application screens) 114K-byte Flash (application screens)
768K-byte Flash (text and bitmaps)
Keypad Front Panel Design
Keypad Stainless steel domed membrane Stainless steel domed membrane Stainless steel domed membrane
Function Keys 16 (F1 – F16) 16 (F1 – F16) 10 (F1 – F10)
Operational Life 1 million cycles minimum 1 million cycles minimum 1 million cycles minimum
Electrical
Communication Port Remote I/O, DH-485, RS-232 (DH-485) Remote I/O, DH-485, or RS-232 (DH-485) Remote I/O, DH-485, or RS-232 (DH-485)
RS-232 Printer Port 1200, 2400, 9600, 19200 baud rate 1200, 2400, 9600, 19200 baud rate 1200, 2400, 9600, 19200 baud rate
AC Power Requirements 85 to 264V ac absolute, 47 to 63 Hz 85 to 264V ac absolute, 47 to 63 Hz 85 to 264V ac absolute, 47 to 63 Hz
AC Power Consumption 110 VA maximum 110 VA maximum 45 VA maximum
DC Power Requirements N/A N/A 18 to 30V dc (24V dc nominal)
DC Power Consumption N/A N/A 12 Watts max. (0.5A @ 24V dc)
Environmental
Operating Temperature 0 to 55_ C (32 to 131_ F) 0 to 50_ C (32 to 122_ F) 0 to 55_ C (32 to 131_ F)
Storage Temperature –25 to 70_ C (–13 to 158_ F) –25 to 70_ C (–13 to 158_ F) –20 to 70_ C (–4 to 158_ F)
Humidity Rating 5 to 95% (without condensation) @ 5 to 85% (without condensation) @ 5 to 95% (without condensation) @
0 to 55_ C (32 to 131_ F) 0 to 30_ C (32 to 86_ F) 0 to 30_ C (32 to 86_ F)
Ratings NEMA TYPE 12, 13, 4X (indoor only), NEMA TYPE 12, 13, 4X (indoor only), NEMA TYPE 12, 13, 4X (indoor only),
IP54, IP65 IP54, IP65 IP54, IP65
Certifications CSA Certified CSA Certified CSA Certified
CSA Class I, Div 2, Groups A, B, C, D CSA Class I, Div 2, Groups A, B, C, D CSA Class I, Div 2, Groups A, B, C, D
UL Listed UL Listed UL Listed
CE marked for all applicable directives CE marked for all applicable directives CE marked for all applicable directives
Weight
Keypad 3.18 kg (7.0 lbs.) 3.14 kg (6.9 lbs.) 1.2 kg (2.7 lbs.)
Touch Screen 2.95 kg (6.5 lbs.) 2.91 kg (6.4 lbs.) 1.2 kg (2.7 lbs.)
Dimensions
Keypad 249 mm (h) x 406 mm (w) x 112 mm (d) 249 mm (h) x 406 mm (w) x 112 mm (d) 167 mm (h) x 266 mm (w) x 106 mm (d)
9.80 in. x 15.97 in. x 4.40 in. 9.80 in. x 15.97 in. x 4.40 in. 6.57 in. x 10.47 in. x 4.17 in.
Touch Screen 249 mm (h) x 336 mm (w) x 112 mm (d) 249 mm (h) x 336 mm (w) x 112 mm (d) 167 mm (h) x 266 mm (w) x 106 mm (d)
9.80 in. x 13.24 in. x 4.40 in. 9.80 in. x 13.24 in. x 4.40 in. 6.57 in. x 10.47 in. x 4.17 in.

Functionality

Push Buttons and Selector Switches Data Entry Alarm Diagnostics Graphics
Momentary NO, NC Numeric Keypad Alarm Banner Line/Connected Line
Maintained Numeric Entry Cursor Point Alarm History Rectangle
Latched Keypad Enable Clear History Button Circle/Ellipse
Multistate Print History Button Freeform Drawings
Information Displays
Control List Selector Acknowledge Alarm Button ISA Symbols
Bar Graph
Clear Alarm Button Custom Graphics
Screen Selectors Message Display
Print Alarm Button Text
Go to Screen Button Multistate Indicator
Acknowledge All Alarms Button
Previous Screen Button Numeric Data Display
Screen Selector List Indicator
Go To Config Screen Button Time and Date Displays
ASCII Display
Print Only Messages

7-38
 Graphic Terminals
PanelView 900 and PanelView 550 Operator Terminals and Software
(Cat. No. 2711 Series)

Ordering Information
Catalog Number Catalog Number
PanelView 900 Color Terminals Keypad Terminal Touch Terminal
PanelView 900 Color, DH-485 Communication and RS-232 Printer Port À 2711-K9C3 2711-T9C3
PanelView 900 Color, RS-232 (DH-485) Communication and RS-232 Printer Port 2711-K9C9 2711-T9C9
PanelView 900 Color, Universal Remote I/O Communication and RS-232 Printer Port 2711-K9C1 2711-T9C1

Catalog Number Catalog Number

PanelView 900 Monochrome Terminals Keypad Terminal Touch Terminal
PanelView 900 Monochrome, DH-485 Communication Ports À 2711-K9A2 2711-T9A2
PanelView 900 Monochrome, DH-485 Communication and RS-232 Printer Port À 2711-K9A3 2711-T9A3
PanelView 900 Monochrome, RS-232 (DH-485) Communication Port 2711-K9A5 2711-T9A5
PanelView 900 Monochrome, RS-232 (DH-485) Communication and RS-232 Printer Port 2711-K9A9 2711-T9A9
PanelView 900 Monochrome, Universal Remote I/O Communication and RS-232 Printer Port 2711-K9A1 2711-T9A1

Catalog Number
Catalog Number Á
PanelView 550 Terminals Á
Touch Terminal
Keypad Terminal
PanelView 550, DH-485 Communication Ports À 2711-K5A2 2711-B5A2
PanelView 550, DH-485 Communication & RS-232 Printer Port À 2711-K5A3 2711-B5A3
PanelView 550, RS-232 (DH-485) Communication Port 2711-K5A5 2711-B5A5
PanelView 550, RS-232 (DH-485) Communication & RS-232 Printer Port 2711-K5A9 2711-B5A9
PanelView 550, Universal Remote I/O Communication & RS-232 Printer Port 2711-K5A1 2711-B5A1
À Requires Interface Converter (cat. no. 1747-PIC) and cable (cat. no. 1747-C10 or -C20) for application transfers using the Configuration Software or
the File Transfer Utility. Also see Power Supply (cat. no. 1747-NP1) below.
Á Add L1 to the catalog number to order the PanelView 550 terminal with dc power instead of ac power.

Software Catalog Number

PanelBuilder 550 Configuration Software for PanelView 550 Terminals 2711-ND2
PanelBuilder 900 Configuration Software for PanelView 550 and 900 Terminals 2711-ND3
PanelBuilder 550 to 900 Software Upgrade Utility 2711-ND2ND3

Accessories and Replacement Parts Catalog Number

256K-byte PC Flash Memory Card 2711-NM11
1M-byte PC Flash Memory Card 2711-NM12
Replacement Function Key Legend Strips for the PanelView 550 Terminals 2711-NF1
Replacement Function Key Legend Strip for the PanelView 900 Monochrome Terminals 2711-NF2A
Replacement Function Key Legend Strip for the PanelView 900 Color Terminals 2711-NF2C
Replacement Mounting Clips for the PanelView 900 Terminals 2711-NP2
Replacement Backlight Lamp for the PanelView 550 Terminals 2711-NL1
Replacement Backlight for the PanelView 900 Color Terminals 2711-NL2
Antiglare Overlay for the PanelView 550 Terminals (Quantity 3) 2711-NV4
Wallmount power supply provides power to 1747-PIC Converter when SLC processor or network is not connected. 1747-NP1
105 to 132V ac input. Separate operating and programming cable is required.
Personal Computer Interface Converter converts RS-232 signals to/from DH-485 signals. 1747-PIC
1.83 m (6 ft) DH-485 Operating and Programming Cable (for 2711-xxA2, -xxA3, -xxC3) 1747-C10
6.1 m (20 ft) DH-485 Operating and Programming Cable (for 2711-xxA2, -xxA3, -xxC3) 1747-C20
5 m (16.4 ft) RS-232 Operating and Programming Cable (for 2711-xxA5, -xxA9, -xxC9)Â 2711-NC13
10 m (32.7 ft) RS-232 Operating and Programming Cable (for 2711-xxA5, -xxA9, -xxC9)Â 2711-NC14
3 m (10 ft) RS-232 Operating and Programming Cable (for 2711-xxA5, -xxA9, -xxC9)Â 2706-NC13
 Cable is also used for RS-232 printer port on 2711-xxA1, -xxA3, -xxA9, -xxC1, -xxC3, -xxC9 terminals.

For more information, see PanelView Flat-Panel Terminals Product Overview, publication 2711-1.11.

7-39
Graphic Terminals
PanelView 1200e and 1400e Operator Terminals and Software
(Cat. Nos. 2711E-K12C6, -K12C6L2, -T12C4, -T12C6, -K14C6, -T14C6, -T14C7, -K14C7)

PanelView 1200e and PanelView 1400e high-end CRT • Expanded Remote I/O interface is also tag-based and has
graphic terminals are an addition to the PanelView 1200 a listen-only option. Up to 64 racks and 64 block
Line, offering VGA color pixel graphics. In addition, a single transfers, containing up to 64 words each, allow the
port offers Data Highway Plus or enhanced Universal transfer of more data than PanelView 1200 terminals
Remote I/O communication to Allen-Bradley PLC and SLC
• ControlNet interface combines high-speed capabilities of
controllers. ControlNet communication is also available. The
remote I/O and multiple PanelView/PLC connectivity of
terminals are available in touch screen or keypad, offering
DH+ communication in a high-performance open systems
convenient and flexible choices for operator input. PanelView
network architecture
1200e keypad terminals are available in a stainless steel
version. PanelView 1200e terminals and 1400e keypad • Expanded messages include 2,000 Alarm, 2,000 Local
terminals have the same mounting dimensions as PanelView and 2,000 Information messages to provide more
1200 terminals. information to the operator
PanelBuilder 1400e Configuration Software is designed for • PCMCIA Memory Card can be used to update and save
use with PanelView 1200e and 1400e terminals. application files without using a personal computer. With
PanelBuilder 1400e software takes advantage of the the PCMCIA, the base user memory of 256K bytes in the
MicrosoftR Windows graphical interface, simplifying terminal can be expanded to 16M bytes
application design and reducing development cost. Screen
configuration is quick and easy using preconfigured symbols • Full complement of operator devices to select from
and dynamic objects. Other time-saving features include tag including push buttons, selectors, indicators, numeric
editor, cut/copy/paste, selection from tool bars, and the ability displays, message displays, numeric keypad, bar graphs,
to work with multiple screens. Existing PanelView 1200 ASCII input and display, online trend object, and custom
application files can be imported. Applications can be graphics
transferred between PanelBuilder 1400e software and • Overlapping objects allow control devices such as push
PanelView 1200e and 1400e terminals by using the RS-232 buttons and indicators to be placed directly on top of other
port or a PCMCIA compatible memory card. Applications objects such as a bitmap of a machine layout, making
can also be transferred using Allen-Bradley Data Highway operator control more intuitive
Plus to Remote I/O Pass-through, ControlNet to Remote I/O
Pass-through or using direct DH+ or ControlNet network. • Expressions reduce PLC addressing and logic required
for the PanelView interface. Arithmetic, comparison, and
logical operations can be applied to all object display
Features components and numeric input object control tags.

• VGA Color Pixel Graphics provide more flexibility in size • Extensive alarm handling during fault conditions is
and location of screen objects and enhances screen handled through Alarm Windows, Alarm Status Screen,
design by allowing import of bit maps (.bmp) and and Alarm History Screen. Audio indicator can also be
AutoCAD (.dxf) files configured. A relay on the back of the terminal can be
used to activate loud horns or highly visible devices.
• Data Highway Plus interface lets one PanelView 1200e or The RS-232 port on the back of the terminal allows for
1400e communicate with multiple PLC controllers or printouts of alarms or screen reports
multiple PanelView terminals to access the same data
from a single PLC controller. The tag-based Data For specifications, see page 7-41.
Highway Plus interface supports unsolicited messages For a typical configuration drawing and for ordering
and eight scan classes information, see page 7-43.
For accessories and replacement parts, see page 7-44.

7-40
 Graphic Terminals
PanelView 1200e and 1400e Operator Terminals and Software
(Cat. Nos. 2711E-K12C6, -K12C6L2, -T12C4, -T12C6, -K14C6, -T14C6, -T14C7, -K14C7)

Specifications
Display Functionality - Push Buttons and Selector Switches
Type: 1200e 12-inch Color CRT • Momentary NO, NC • Multi-state • Set bit cursor point
1400e 14-inch Color CRT • Maintained • Control list selector • Scroll list selector
Resolution VGA 640 x 480 pixels • Latched • Interlocked • Screen selectors
Application memory Data Entry
256K bytes base terminal memory, expandable to 16M bytes via PCMCIA • Numeric keypad • ASCII input • Numeric cursor point
Touch Screen Design Information Display
Type: 1200e Matrix of 120 touch cells (10 across x 12 high) • Bar graph • Numeric data display • Time display
Rated for 1,000,000 presses • Message display • ASCII display • Date display
1400e Analog touch screen • Multi-state indicator • List indicator • Trend Object
Membrane Water-clear, hardcoated, scratch-resistant polyester, Graphics
over chemically strengthened glass • Line/connected line • ISA symbols • Custom graphics
Bezel Cast aluminum with a black powder coating • Rectangle • Text • Wedge
• Circle/ellipse • Bit map (.bmp) • AutoCAD (.dxf)
Keypad Front Panel Design import import
Keypanel Black anodized sheet aluminum with continuous Diagnostics
hard-coated scratch-resistant polyester surface
• Alarm window • Alarm history • Alarm status
Keys Sealed stainless steel dome membrane switches with
tactile feedback. Rated for 2,000,000 presses
Window Continuous water-clear hard-coated, eight mil.
polyester over chemically strengthened glass
Stainless Steel Keypad Front Panel Design
Keypanel Type 304 stainless steel
Keys Sealed stainless steel dome membrane switches with
tactile feedback. Rated for 2,000,000 presses
Window Continuous water-clear hard-coated, eight mil.
polyester over chemically strengthened glass
Electrical
Power requirement 90 to 132, 180 to 264V ac, 47 to 63 Hz
Power consumption
1200e 65 W typical, 90 W maximum
1400e 90 W typical, 120 W maximum
Environmental
Operating temp. 0 to 50_ C (32 to 122_ F)
Storage temperature -40 to 85_ C (-24 to 185_ F)
Operating humidity 5 to 95% (without condensation) at 0 to 30° C (32 to
86° F)
Non-operating 5 to 95% (without condensation) at -40 to 70° C (-40
humidity to 158° F)
Approvals UL/C-UL — Designed for CE
Ratings NEMA 4X (indoor only), NEMA 12 and NEMA 13
2711E-T12C6 NEMA 12 only
Dimensions
Touch Screen:
1200e 342.9 mm (H) x 350.5 mm (W) x 388.8 mm (D)
13.5 in (H) x 13.8 in (W) x 15.3 in (D)
1400e 354.8 mm (H) x 441.5 mm (W) x 422.8 mm (D)
14 in (H) x 17.4 in (W) x 16.6 in (D)
Keypad:
1200e 354.8 mm (H) x 482.6 mm (W) x 382.9 mm (D)
14 in (H) x 19 in (W) x 15.1 in (D)
1400e 354.8 mm (H) x 482.6 mm (W) x 424.3 mm (D)
14 in (H) x 19 in (W) x 16.7 in (D)
Weight
Touch Screen:
1200e 14.8 kg (32.6 lbs)
1400e 18.6 kg (41 lbs)
Keypad:
1200e 15.3 kg (33.8 lbs)
1400e 19.1 kg (42 lbs)

7-41
Graphic Terminals
PanelView 1200 Operator Terminals and Software
(Cat. Nos. 2711-KA1, -KC1, -TA1, -TC1, -TA4, -TC4)

PanelView 1200 Operator Terminals are the original The keypad terminal has 21 configurable function keys,
PanelView terminals designed to replace traditional numeric keypad, Backspace, Enter, Home, directional
hard-wired panel devices À, such as (push buttons, bar cursor arrows, Select, Cancel, Raise, and Lower keys.
graphs, digital readouts, and message displays) with CRT
The Touch-Screen Terminal has 120 touch cells (10
screens that are simple to configure. Use PanelView 1200
across  12 high).
terminals in control panel applications that connect to
Allen-Bradley PLC controllers over a Universal Remote • Color or monochrome amber CRT supported by both
I/O link. terminals.

Features Specifications
• PanelBuilder Software for DOS (2711-ND1) lets you Mounting Panel or 19-inch rack
create, store, and transfer application screens. Create PLC interface Allen-Bradley Universal Remote I/O link
screens by selecting objects from a library and placing Communication rates • 57.6k bit/s
them on a screen. Then, use menus to assign attributes, • 115.2k bit/s
such as a PLC address, color, and text. • 230k bit/s
Memory Series E or earlier, contains 64K bytes of
• PanelBuilder 1200 Software for Windows (cat. no. battery backed CMOS RAM.
2711-ND1W) combines the functionality of PanelBuilder Series F is supplied with 128K bytes of
DOS Software with the advantages of MicrosoftR battery backed CMOS RAM. All Terminals
Windows. Advanced editing features use Windows provide EEPROM / EPROM sockets for
user memory backup. For Series E or
menus, dialog boxes and graphical editing tools to earlier, these sockets may be alternatively
configure application files quickly and easily. used to provide an additional 64K bytes of
user memory.
PanelBuilder Software (for DOS or Windows) runs on
Supply voltage 110/220V ac
Allen-Bradley Industrial Terminals, IBM PC or compatible
Operating temperature 0 to 50° C (32 to 122° F)
computers with a minimum of 640K bytes of RAM.
• The remote I/O port connects directly to the Universal For a typical configuration drawing and for ordering
Remote I/O link supporting both single-transfer and information, see page 7-43.
block-transfer of data.
For accessories and replacement parts, see page 7-44.
• The RS-232 port allows you to transfer application files
between the PanelView 1200 terminal and a personal
computer (IBM PC or compatible) running PanelBuilder
software. You can also use this port as a printer port.
• Touch-Screen or keypad terminal options provide
additional flexibility in size and ease of use.
1 Replaces hardwired interface devices for non-safety critical
applications.

7-42
 Graphic Terminals
PanelView 1400e and 1200e Operator Terminals and Software
(Bulletin 2711)

Typical Configuration
Universal Remote I/O Universal Remote I/O Link
Personal Computer
Printer Development
System

PLC Processor I/O Chassis PanelView 1200 RS-232 PanelView 1400e

Terminal Terminal

Personal Computer
Data Highway Plus
Data Highway Plus
Development
System
Printer

RS-232
PLC Processor PanelView 1200e PanelView 1400e PLC Processor PanelView 1400e
Terminal Terminal Terminal
Personal Computer
ControlNet Development
ControlNet System

Printer

RS-232
PLC-5/40C Processor PanelView 1200e PanelView 1400e PLC-5/40C Processor PanelView 1400e
Terminal w/ ControlNet Terminal w/ ControlNet Terminal w/ ControlNet
Communication Communication Communication

Ordering Information
PanelView 1400e and 1200e Enhanced High-End Graphics Terminals
Description Catalog Number
PanelView 1400e Color Touch-Screen Stud-Mount Terminal, NEMA Type 12, 13, 4X (indoor only) with DH+ and Universal Remote I/O 2711E-T14C6
PanelView 1400e Color Keypad Stud-Mount Terminal, NEMA Type 12, 13, 4X (indoor only) with DH+ and Universal Remote I/O 2711E-K14C6
PanelView 1400e Color Touch-Screen Stud-Mount Terminal, NEMA Type 12, 13, 4X (indoor only) with ControlNet communication 2711E-T14C7
PanelView 1400e Color Keypad Stud-Mount Terminal, NEMA Type 12, 13, 4X (indoor only) with ControlNet communication 2711E-K14C7
PanelView 1200e Color Touch-Screen Clip-Mount Terminal, NEMA Type 12 with DH+ and Universal Remote I/O 2711E-T12C6
PanelView 1200e Color Keypad Stud-Mount Terminal, NEMA Type 12, 13, 4X (indoor only) with DH+ and Universal Remote I/O 2711E-K12C6
PanelView 1200e Color Touch-Screen Stud-Mount Terminal, NEMA Type 12, 13, 4X (indoor only) with DH+ and Universal Remote I/O 2711E-T12C4
PanelView 1200e Stainless Steel Color Keypad Terminal, NEMA Type 12, 13, 4X (indoor only) with DH+ and Universal Remote I/O 2711E-K12C6L2
PanelBuilder 1400e Windows Development Software for PanelView 1200e, 1400e and enhanced Series F or Series G PanelView 1200 Terminals 2711E-ND1
with 2711E-UIB12C enhancement kit
French PanelBuilder 1400e Windows Development Software for PanelView 1200e, 1400e, and enhanced series F or series G PanelView 1200 2711E-ND1FR
terminals with 2711E-U1B12C enhancement kit.
German PanelBuilder 1400e Windows Development Software for PanelView 1200e, 1400e, and enhanced series F or series G PanelView 1200 2711E-ND1DE
terminals with 2711E-U1B12C enhancement kit.
File Transfer Utility for PanelView 1400e, 1200e, and 1200 terminals. Note: File transfer software is included with PanelBuilder 1400e software. 2711E-ND7
This is a stand-alone utility for file transfer only and requires less hard-disk space than PanelBuilder 1400e software.

For PanelView 1200 ordering information, see page 7-44.

7-43
Graphic Terminals
PanelView 1400e, 1200e, and 1200 Operator Terminals and Software
(Bulletin 2711)

PanelView 1200 Terminals and Software (Original Character Graphics, Remote I/O PanelView Terminals)

Description Catalog Number

PanelView 1200 Keypad Terminal, Monochrome CRT, Type 12, 13, 4X (indoor only) 2711-KA1
PanelView 1200 Keypad Terminal, Color CRT, Type 12, 13, 4X (indoor only) 2711-KC1
PanelView 1200 Touch-Screen Terminal, Monochrome CRT, Type 12 2711-TA1
PanelView 1200 Touch-Screen Terminal, Color CRT, Type 12 2711-TC1
PanelView 1200 Touch-Screen Terminal, Monochrome CRT, Type 12, 13, 4X (indoor only) 2711-TA4
PanelView 1200 Touch-Screen Terminal, Color CRT, Type 12, 13, 4X (indoor only) 2711-TC4
PanelBuilder 1200 Development Software for Windows v3.1 or later is used to develop application screens for PanelView 1200 terminals.
Contains User Manual and:
• PanelBuilder 1200 software on four 3-1/2 inch diskettes.
• File Transfer Utility on one 3-1/2 inch diskette.
• Upload/Download Cable NOT included (use cat. no. 2711-NC1) 2711-ND1W
PanelBuilder Development Software for DOS is used to develop application screens for PanelView 1200 terminals. Contains User Manual and:
• PanelBuilder software on two 5-1/4 inch diskettes and one 3-1/2 inch diskette.
• Pass-through Download Utility on one 5-1/4 inch and 3-1/2 inch diskette.
• Upload/Download Cable and Adapters (same as cat. no. 2711-NC1) 2711-ND1

Accessories and Replacement Parts for PanelView 1400e, 1200e, and 1200 Terminals
Description Catalog Number
Upload/download cable for PanelView 1400e, 1200e, and 1200 terminals 3.1 m (10 ft) long 2711-NC1
Remote keyswitch and RS-232 port assembly, with 3.1 m (10 ft) long cable, for PanelView 1400e, 1200e, and 1200 terminals 2711-NC2
Replacement Keypad Faceplate for PanelView 1200 Terminals, Series D or later (for cat. no. 2711-KA1, -KC1 only) 2711-NK1
EPROM Memory Chip Set is for PanelView 1200 Terminals, Series C and earlier. Two EPROMs help back up application memory. Download 2711-NM1
configuration files to EPROM programmer using PanelBuilder 1200 Development Software
EEPROM Memory Chip Set for PanelView 1200 Terminals only
When you install this option in the PanelView 1200 Terminal, the configuration file is automatically loaded into the EEPROMs when downloaded
from the development computer. Cat. no. 2711-NM2 (containing 2 EEPROMs) is for PanelView 1200 Terminals, Series C or earlier, and is used 2711-NM2
to increase application memory from 64K to 128K or to back up application memory. Cat. no. 2711-NM3 (containing 1 EEPROM) is for PanelView 2711-NM3
1200 Terminals, Series D or E, and is used to increase application memory from 64K to 128K bytes or to back up application memory. Cat. no. 2711-NM4
2711-NM4 is for PanelView 1200 Terminals, Series F, and is used for memory backup only (128K bytes).
256K-byte PCMCIA flash memory card for PanelView 1200 Terminals, Series F only, and PanelView 1200e and 1400e Terminals 2711-NM11
1M-byte PCMCIA flash memory card for PanelView 1200e and 1400e Terminals 2711-NM12
2M-byte PCMCIA flash memory card for PanelView 1200e and 1400e Terminals 2711-NM13
4M-byte PCMCIA flash memory card for PanelView 1200e and 1400e Terminals 2711-NM14
19-inch Rack Mount Kit for PanelView 1200 and 1200e clip mount touch screen terminals (for cat. nos. 2711-TA1, -TC1, and 2711E-T12C6) 2711-NR1
19-inch Rack Mount Kit for PanelView 1400 and 1400e touch screen terminals (for cat. no. 2711E-T14C6) 2711-NR4
Replacement Touch Screens for PanelView 1200 Terminals, Series C or earlier, (for cat. nos. 2711-TA1, -TC1 only) 2711-NT1C
Touch Screen Replacement Kit for PanelView 1200 Terminals, Series D or later, (cat. nos. 2711-TA1, -TC1, -TA4, -TC4) and for PanelView 1200e 2711-NT1
Terminals (cat. nos. 2711E-T12C6, -T12C4)
Anti-glare, protective overlay for PanelView 1200 and 1200e terminals (package of 5) 2711-NV1
ControlNet Adapter Kit for PanelView 1200e (cat. nos. 2711E-T12C6, -K12C6, -T12C4, -K12C6L2) and 1400e (cat. nos. 2711E-T14C6, -K14C6). 2711E-NA1
Note: A ControlNet ISA/EISA Bus Interface (cat. no. 1784-KTCX Series B or later) is also required for ControlNet communication.
The adapter (cat. no. 2711E-NA1) and ControlNet Bus interface card (cat. no. 1784-KTCX) are not required for cat. nos. 2711E-T14C7 and
-K14C7. They are already integrated into those terminals.
Keypad Replacement Kit for PanelView 1200e (for cat. no. 2711E-K12C6) 2711E-NK2
Stainless Steel Keypad Replacement Kit for PanelView 1200, Series D or later, and PanelView 1200e Keypad Terminals 2711E-NK3
Keypad Replacement Kit for PanelView 1400e (for cat. no. 2711E-K14C6) 2711E-NK5
Analog Touch-Screen Replacement Kit for PanelView 1400e terminals (for cat. no. 2711E-T14C6) 2711E-NT2
Enhancement kit for PanelView 1200 terminals, Series F and Series G, to PanelView 1200e first release functionality (includes 2M bytes SIMM 2711E-U1B12C
and 4M bytes PCMCIA flash memory card)

7-44
 Industrial Computer Products
Industrial Computers with Flat TFT Displays
(Cat. No. 6180 Series)

As members of the Allen-Bradley family of high-performance Use the specifications table as a selection guide. The exact
open systems, 6180 Industrial Computers can be ordered catalog number is determined by selecting options such as
with pre-installed software products including popular processor speed, display size, system memory, hard drive
operating systems and MMI and control software. size, floppy drive, CD ROM, and pre-installed software. For
With adherence to PC standards, these products can easily ordering information, see page 7-51 or visit our web site at
accommodate your evolving requirements. [Link] and select Operator Interface and
Industrial Computer Products.

Specifications

Catalog Number Series: 6180-xxC, -xxD 6180-xxG 6180-xxE, -xxF

Mounting: Panelmount / NEMA 4X (indoor) or 19-inch Rackmount
Display Type: Integrated Flat TFT Display (800  600)
Display Size: 10.4-inch Display 11.3-inch Display
Display Design: QuickReplacet Backlight System and OptiClarityt Display offer exceptional brightness and
Standard Backlight
clarity at wide ranges
Touchscreen: Res-Ag Touch Screen Optional — Res-Ag Touch Screen Optional
Description: 26 Programmable Keys plus Numeric 36 Programmable Keys plus Numeric Keys, 26 Programmable Keys plus Numeric Keys, Integral
Keys, Integral Mouse, Front Status Indicators Alphanumeric Keys, Front Status Indicators Mouse, Front Status Indicators
Approximate Overall Dimensions (8U) (WHD): 483  355.6  203.2 mm (19  14  8 in)
Cut-out Dimensions (WxH): 429.26  325.39 mm (16.9  12.85 in)
Peripherals: Sealed Front Access Doors to: Optional Diskette or CD ROM Drive, Power Switch, InfraRed Interface, PS/2 Mouse and Keyboard Ports
Slots: Active ATX Motherboard Option Slots: 2 ISA + 3 PCI + 1 Shared (PCI or ISA)
Note: Subtract 1 ISA slot for required Keyboard Interface Card and 1 PCI slot for required Video Card
Chassis: Chassis has two internal 3.5-inch hard drive bays, one bi-directional half-height bay (for diskette or CD ROM drive access via front left door or rear door
opening, one 1-inch bay (for diskette drive access via upper left side), option card retention and corrosion resistance.
Power Requirements: 100-120 V ac / 200 – 240 V ac (47-63 Hz)
Power Consumption: 210 Watt input for 160 Watt output power supply
Ambient Temperature (Operating): 10 to 50°C (50 to 122°F)
(Non-operating): –25 to 60°C (–13 to 140°F)
Relative Humidity: 8 to 80% (without condensation)
Vibration (Operating): 1.0 g @ 10 to 150 Hz sine sweep; .006 peak to peak
(Non-operating): 2.0 g @ 20 to 500 Hz; .01 in. peak to peak
Shock (Operating): 15 g (½ sine, 11 ms)
(Non-operating): 30 g (½ sine, 11 ms)
Weight: 15.89 kg (35 lbs)

7-45
Industrial Computer Products
Industrial Computers with CRT Displays
(Cat. Nos. 6151 and 6152 Series)

The Integrated Industrial Computers (14-inch) are members Use the specifications tables (pages 7-46 and 7-47) as a
of the A-B family of open systems, and they can handle selection guide. The exact catalog number is determined by
shock, vibration, dirt, washdowns, and high temperatures. selecting options such as processor speed, display size,
These computers are bundled with popular operating system memory, hard drive size, floppy drive, CD ROM, and
systems, Rockwell Automation application software, and pre-installed software. For ordering information, see page
equipped with ISA and/or PCI bus architecture. 7-51 or visit our web site at [Link] and select
Operator Interface and Industrial Computer Products.

Specifications

14-inch CRT Displays

Catalog Number Series: 6151 6152

Mounting: Panelmount / NEMA 4 or 19-inch Rackmount
Approximate Dimensions: (7U) (9U)
(WxHxD) 483  310  413mm (19.0  12.2  16.3 in.) 483  399  412.83mm (19.0  15.7  16.25 in.)
Front Bezel Dimensions (H W): 310 483 mm (12.2 19 in) 399 483 mm (15.7 19 in)
Display Type: Integrated 14-inch CRT Display (1024 768)
Touchscreen: Resistive Antiglare Touch Screen Optional
Description: 10 Fkeys + 33 Numeric Keys/Cursor 20 Fkeys + 33 Numeric Keys/Cursor
Weight: 22.70 kg (50 lbs) 24.97 kg (55 lbs)
Peripherals: Front Door Access to Optional Diskette Drive and 9-pin Pass-through Serial Port
Slots: Passive Backplane with 8 ISA Slots and Pentium 100, 166, or 200 (200 has Onboard Video)
Power Requirements: 90-132V ac / 180-264V ac Auto-switching, (47-63 Hz)
Power Consumption: 150 Watt (typical), 300 Watt (maximum)
Ambient Temperature: Operating: 5 to 50°C (41 to 122°F)
(Non-operating): -30 to 60°C (–22 to 140°F)
Relative Humidity: 8 to 80% (without condensation)
Vibration (Operating): 0.01 in. peak to peak, 5-44 Hz sine; 1.0 g peak, 44-500 Hz sine
(Non-operating): 0.1 in. p-p, 5-20Hz sine, 2.0 g peak, 20-500Hz sine
Shock (Operating): 10 g (½ sine, 11 ms)
(Non-operating): 30 g (½ sine, 11 ms)

7-46
 Industrial Computer Products
Industrial Computers with CRT Displays
(Cat. Nos. 6153 and 6154 Series)

The Integrated Industrial Computers (20-inch) are members Use the specifications table as a selection guide. The exact
of the A-B family of open systems, and they can handle catalog number is determined by selecting options such as
shock, vibration, dirt, washdowns, and high temperatures. processor speed, display size, system memory, hard drive
These computers are bundled with popular operating size, floppy drive, CD ROM, and pre-installed software. For
systems, Rockwell Automation application software, and ordering information, see page 7-51 or visit our web site at
equipped with ISA and/or PCI bus architecture. [Link] and select Operator Interface and
Industrial Computer Products.

Specifications

20-inch CRT Displays

Catalog Number Series

6153-AB, -AE, -AF 6153-CB, -CF, -EB, -EEx 6154-AB, -AE, -AF 6154-CB, -CF, -EB, -EEx
Mounting: Panelmount Rackmount
Display Type: Integrated 20-inch CRT (1280  1024)
Touchscreen: Res-Pol, Res-Ag, Cap-Pol or Cap-Ag Touch Screen Options
Faceplate: (12U) Faceplate: (13) Faceplate Faceplate: (13U)
Approximate Dimensions (WxHxD):
483  533.4  463.5mm 483  578  463.5mm 483  489  451mm 483  578  451 mm
(19  21  18.25 in) (19  22.75  18.25 in) (19  19.25  17.75 in) (19  22.75  17.75 in)
Weight: 43.13 kg (95 lbs) 54.48 kg (120 lbs) 40.86 kg (90 lbs) 45.40 kg (100 lbs)
Peripherals: Front Door Access to Optional Diskette — Front Door Access to Optional Diskette
— and/or CD ROM Drive and Power and/or CD ROM Drive and Power
Switch Switch
Slots: Passive 4 Slot ISA with P100, Passive 12 Slot ISA with P100, 166, or Passive 4 Slot ISA with P100, 166, or Passive 12 Slot ISA with P100, 166, or
166, or 200 (200 has Onboard Video) 200 (200 has Onboard Video) 200 (200 has Onboard Video) 200 (200 has Onboard Video)
or or
Active 8 Slot 4 ISA + 3 PCI + 1 shared Active 8 Slot 4 ISA + 3 PCI + 1 shared
with P100 or 166 with P100 or 166
Power Requirements: 90-132V ac / 180-264V ac Auto-switching, (47-63 Hz)
Power Consumption: 150 Watt typical, 300 Watt maximum
Ambient Temperature (Operating): 5 to 45°C (41 to 113°F)
(Non-operating): –30 to 60°C (–22 to 140°F)
Relative Humidity: 8 to 80% (without condensation)
Vibration (Operating): 0.01 in. peak to peak, 5-14 Hz sine; 1.0g peak, 44-500 Hz sine
(Non-operating): 0.1 in. p-p, 5-20Hz sine, 2.0 g peak, 20-500Hz sine
Shock (Operating): 10 g (½ sine, 11 ms)
(Non-operating): 30 g (½ sine, 11 ms)

7-47
Industrial Computer Products
Industrial Computers without Integral Display
(Cat. Nos. 6155 and 6180 Series)

As members of the Allen-Bradley family of high-performance Use the specifications table as a selection guide. The exact
open systems, 6180 Industrial Computers can be ordered catalog number is determined by selecting options such as
with pre-installed software products including popular processor speed, display size, system memory, hard drive
operating systems and MMI and control software. size, floppy drive, CD ROM, and pre-installed software. For
ordering information, see page 7-52 or visit our web site at
The 6155 series Industrial Rackmount Computer can be
[Link] and select Operator Interface and
used with any SVGA monitor (sold separately).
Industrial Computer Products.

Specifications

Catalog Number Series: 6155-xx 6180-xxB 6180-xxA

Mounting: 19-inch Rack or Bench Top Panelmount / NEMA 4X or 19-inch Rackmount 19-inch Rack or Inside Panel
Front Bezel: (4U), Faceplate: (8U), Mounting Plate: (7.43U),
(WxHxD): 483  178  444.5mm 483  355.6  203.2mm 483  330.2  179mm
(19  7  17.5 in) (19  14  8 in) (19  13  7 in)
Weight: 15.89 kg (35 lbs) 11.35 kg (25 lbs)
Peripherals: Front Access to Opt. Diskette, CD ROM Front Access to Opt. Diskette and/or CD ROM drive, —
and 3rd Device Drive Power Switch, Infrared port, PS/2 Mouse / Keyboard
Ports
Slots: Passive 7 or 13 Slot ISA/PCI with P100, 166, Active Motherboard Slots: 2 ISA + 3 PCI + 1 Shared (ISA or PCI)
or 200 (200 has Onboard Video) or with Pentium 100, 133, 166, or 200 Processor Options
Active 8 Slot with P100, 166 4 ISA + 3 PCI + 1
Shared or
Active 7 Slot with PPro 200 3 ISA + 3 PCI + 1 Shared
or
Active 4 Slot with Dual PPro 200 3 PCI + 1 Shared
(PCI or ISA)
AC Power Requirements: 90-132V ac / 180-264V ac
Autoswitching, 47-63 Hz, 150W (typical), 300W (max) 100-120V ac / 200-240V ac, 47-63 Hz, 210W Input, 160W Output
Operating Temperature: 5 to 45°C (41 to 113°F)
(Non-operating): –30 to 60°C (–22 to 140°F)
Vibration (Operating):
0.1 in. peak to peak, 5-14 Hz, 1.0g @ 10 to 150 Hz sine sweep; 0.006 peak to peak
1.0g peak, 14-500 Hz
Shock (Operating): 10 g (½ sine, 11 ms) 15 g (½ sine, 11 ms)
Relative Humidity: 8 to 80% (without condensation)
Certifications: UL / C-UL 1950 Listed, CE Mark UL / C-UL

7-48
 Industrial Computer Products
Industrial CRT Monitors
(Cat. Nos. 6156, 6158, and 6159 Series)

The Industrial 14-, 17-, and 21-inch CRT Color Monitors are Use the specifications table as a selection guide. The exact
designed for long-term, dependable performance in harsh catalog number is determined by selecting options such as
factory environments. display size, touchscreens, video connectors and cables,
and accessories. For ordering information, see page 7-52 or
The 14-inch monitors (6156 series) are panel or
visit our web site at [Link] and select Operator
rack-mountable and are available with or without keypads or
Interface and Industrial Computer Products.
touch screens.
The 21-inch monitors (6158 series) display a view of an
entire process including minute detail and vast amounts of
detail. A bonded capacitive touch screen is optional.

Specifications
Catalog Number Series: 6156-Axx 6159-AAxx 6158-AAxx
Display Size: 14-inch CRT (1024  768) 17-inch CRT (1280  1024) 21-inch CRT (1280  1024)
Mounting: Panelmount / NEMA 4 or 19-inch Rackmount Panelmount
Description: Optional Integrated Keypad includes 10Fkeys plus Numeric Keys No Integrated Keys
Touchscreen: Any combination of Keypad and/or Either Polycarbonate Window over CRT or Resistive Either with or without Polycarbonate Window or with
Touch Screen Options anti-glare or Capacitive anti-glare Touch Screen Capacitive anti-glare Touch Screen
Faceplate Dimensions: (7U) Faceplate (9U) Faceplate
(WHD) 483  310  412.75 mm 483  400  422.40 mm 514.35  425.45  571.50 mm
(19  12.2  16.25 in) (19  15.75  16.63 in) (20.25  16.75  22.5 in)
Weight: 22.70 kg (50 lbs) 22.70 kg (50 lbs) 31.78 kg (70 lbs)
AC Power Requirements: 90-132 / 198-264V ac, 50-60 Hz, 120W (max) 100-250V ac, 50-60 Hz, 135W (max) (461 BTU)
100-250V ac, 50-60 Hz, 120W (max)
Vibration (operating):
0.01 in. peak to peak 5-17 Hz sine, 0.006 in. peak to peak 5-57 sine, 0.01 in. peak to peak 5-44 Hz sine
1.5 g peak, 17-640 Hz sine 1.5 g peak, 57-640 Hz sine 1.0 g peak, 44-500 Hz sine
Shock (operating): 15 g (½ sine, 11 ms)
Ambient Temperature: 0 to 50°C (32 to 122°F)
Certification: UL/C-UL 508, UL 1950 Recognized, UL/C-UL 1950 Recognized, NEMA 4/12/13, UL/C-UL (UL 1950, CSA 950, Recognized), CE Mark
NEMA 4/12/13, CE97 (EMC Directive 89/336/EEC and (EN50081-2, EN50082-2, EN60950)
CE Mark, EN60950, FCC Class A LV Directive; 73/23EEC), FCC Class A
Relative Humidity: 5-95% 10-90%

7-49
Industrial Computer Products
Industrial CRT Monitors
(Cat. Nos. 6157 Series)

Designed for long-term, dependable performance in harsh Use the specifications table as a selection guide. The exact
factory environments, the 20-inch monitors are available in catalog number is determined by selecting options such as
four basic form factors: ergonomic desktop, benchtop, display size, touchscreens, video connectors and cables,
rackmount, or panelmount. Operator input is completed via and accessories. For ordering information, see page 7-53 or
touchscreen with technology that can be integrated with your visit our web site at [Link] and select Operator
choice of capacitive, resistive, or SAW (Surface Acoustic Interface and Industrial Computer Products.
Wave) touchscreens.

Specifications
Catalog Number Series
6157-AA, -BA, -BExx 6157-BBxx 6157-BCxx 6157-BDxx
Display: 20-inch CRT, 20-inch CRT (1280  1024)
-AA (1024  768)
-BA, -BE (1280  1024)
Mounting: Panelmount NEMA 4, Rackmount Bench Top Desk Top
(-BE includes front video controls) (for 19-inch Rack Systems) (rectangular metal casing) (ergonomic plastic casing)
Touchscreen: Res-Ag, Res-Pol, Res-Ag, Res-Pol, Cap-Ag, SAW-Ag, SAW-Pol Touch Screen Options SAW-Ag, SAW-Pol
Cap-Ag, Cap-Pol Touch Screen Options Touch Screen Options
Description: No Integrated Function/Numeric Keys
Faceplate (9U) Faceplate (9U) Front of Unit Front of Unit
(WHD) 483  399.2  496.3 483  400  452 mm 483  476.25  568.45 mm (HD) 435.6  520.7 mm
mm (19  15.75  17.79 in) (19  18.75  22.38 in) (17.15  20.5 in)
(19  15.72  19.54 in)
Weight: 31.78 kg (70 lbs) 29.5 kg (65 lbs) 27.24 kg (60 lbs)
Options: Flat Polycarbonate Window 18 or 24-inch rack Slides Optional Tilt Swivel Base Optional
over CRT (standard with-AA or -BA,
Opt. with-BE
Certification: UL 1950 Recognized; FCC class A; EN55022; EN50082-2; EN60950:1992
CE Directives 89/336/EEC, 73/23/EEC; DHHS CFR 21.1020 Compliant
UL508, NEMA 4X (indoor)
Power Requirements: 100-250V ac, 50-60 Hz single phase
Power Consumption: 130W (max)
Ambient Temperature (Operating): 0 to 50°C (32 to 122°F)
(Non-operating): -30 to 70°C (–22 to 158°F)
Relative Humidity: 10 to 90% (without condensation)
Vibration (Operating): 1.0g peak accl., 57 to 2 KHz sine; 0.006 in. peak to peak, 5 to 57 Hz sine
Shock (Operating): 15 g (½ sine, 11 ms duration)

7-50
 Industrial Computer Products
Ordering Information

6151 and 6152 Industrial Computers with 6153 and 6154 Industrial Computers with Integrated
Integrated 14-inch CRT 20-inch CRT

61xx – _ _ _ _ _ _ _ _ _ _ _ 61xx – _ _ _ _ _ _ _ _ _ _ _
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11
Position #1 Position #1
Bulletin Number Bulletin Number
6151 = 7U Panelmount 6153 = 7U Panelmount
6152 = 9U Panelmount 6154 = 9U Rackmount
Position #2 Position #2
Processor and Backplane Processor and Backplane
BB = Passive 8-Slot ISA, Pentium 100 MHz AB = Passive 4-Slot ISA, Pentium 100 MHz
BE = Passive 8-Slot ISA, Pentium 166 MHz AE = Passive 4-Slot ISA, Pentium 166 MHz
BF = Passive 8-Slot ISA, Pentium 200 MHz with on–board Video AF = Passive 4-Slot ISA, Pentium 200 MHz with on–board Video
Position #3 CB = Passive 12-Slot ISA, Pentium 100 MHz
Base Unit CE = Passive 12-Slot ISA, Pentium 166 MHz
A = 14-inch CRT (1024  768) CF = Passive 12-Slot ISA, Pentium 200 MHz with on–board Video
B = 14-inch CRT with touch screen (resistive anti-glare) EB = Active 8-Slot ISA/PCI, Pentium 100 MHz
T = 14-inch CRT (1024  768), T60 Cutout compatible 6152 Series Only EE = Active 8-Slot ISA/PCI, Pentium 166 MHz
Position #4 Position #3
Video Card Display/Touch Screen
A = ISA, 1M byte Video Memory (not for processor 2–BF) A = 20-inch CRT (1280  1024)
Z = None B = 20-inch CRT with touch screen (resistive polished)
Position #5 C = 20-inch CRT with touch screen (resistive antiglare)
System Memory D = 20-inch CRT with touch screen (capacitive, polished)
C = 8M bytes RAM E = 20-inch CRT with touch screen (capacitive, anti-glare)
D = 16M bytes RAM Position #4
E = 32M bytes RAM Video Card
F = 64M bytes RAM A = ISA, 1M byte Video Memory
G = 128M bytes RAM C = PCI, 2M bytes Video Memory (2EB or EE req)
H = 256M bytes RAM D = PCI, 4M bytes Video Memory (2 EB or EE req)
Position #6 Z = None
Hard Drive
C = 1.5+ Gbyte EIDE Position #5
D = 2+ Gbyte EIDE System Memory
Z = None C = 8M bytes RAM
D = 16M bytes RAM
Position #7
E = 32M bytes RAM
Removable Media
F = 64M bytes RAM
A = 1.44-M byte 3.5-inch Diskette Drive
G = 128M bytes RAM
Z = None
H = 256M bytes RAM (Not for Option 2 – ”EB” and “EE”)
Position #8
Pre–installed Option Cards Position #6
A = Ethernet Card (ISA Bus) Hard Drive
C = KTX card (Remote I/O Scanner – 1 channel, ISA Bus) C = 1.5+ Gbyte EIDE
D = KTXD card (Remote I/O Scanner – 2 channel, ISA Bus) D = 2+ Gbyte EIDE
F = KTC card (ControlNet Personal Interface, ISA Bus) Z = None
G = KTCX card (ControlNet Deluxe, ISA Bus) Position #7
H = Ethernet (ISA) card and KTX (ISA) card Removable Media
I = Ethernet (ISA) card and KTXD (ISA) card A = 1.44-M byte 3.5-inch Diskette Drive
J = Ethernet (ISA) card and KTC (ISA) card B = CD ROM Drive (EIDE)
K = Ethernet (ISA) card and KTCX (ISA) card C = 1.44-M byte 3.5-inch Diskette Drive and CDROM Drive (EIDE)
Z = None Z = None
Position #9 Position #8
Power Input/Line Cord Pre–installed Option Cards
A = 120/240V ac Input with USA power cord A = Ethernet card (ISA)
B = 120/240V ac Input no power cord B = Ethernet card (PCI Bus), only for base system with PCI
F = 24V dc Input C = KTX card (Remote I/O Scanner – 1 channel, ISA Bus)
Position #10 D = KTXD card (Remote I/O Scanner – 2 channel, ISA Bus)
Pre-installed Operating System F = KTC card (ControlNet Personal Interface, ISA Bus)
A = MS-DOS v6.22 G = KTCX card (ControlNet Deluxe, ISA Bus)
B = Windows 95 H = Ethernet PCI and KTX ISA Card, only for base system with PCI
D = Windows NT Workstation 4.0 I = Ethernet PCI and KTXD ISA card, only for base system with PCI
Z = None J = Ethernet PCI and KTC ISA card, only for base system with PCI
Position #11 K = Ethernet PCI and KTCX ISA card, only for base system with PCI
Pre-installed Application Software Z = None
H = RSView32 Runtime 150 with LINX Position #9
I = RSView32 Runtime 300 with LINX Power Input/Line Cord
J = RSView32 Runtime 1500 with LINX A = 120/240V ac Input with USA power cord
K = RSView32 Runtime with LINX B = 120/240V ac Input no power cord
Z = None

7-51
Industrial Computer Products
Ordering Information

6153 and 6154 Industrial Computers with Integrated 6155 Industrial Computer without Display,
20-inch CRT (continued) Rackmount (continued)
Position #10 Position #8
Pre–installed Operating System Pre–installed Option Cards
A = MS-DOS v6.22 A = Ethernet card (ISA) Bus
B = Windows 95 B = Ethernet card (PCI Bus), only for base system with PCI
D = Windows NT Workstation 4.0 C = KTX card (Remote I/O Scanner – 1 channel, ISA Bus)
Z = None D = KTXD card (Remote I/O Scanner – 2 channel, ISA Bus)
F = KTC card (ControlNet Personal Interface, ISA Bus)
Position #11
G = KTCX card (ControlNet Deluxe, ISA Bus)
Pre-installed Application Software
H = Ethernet PCI and KTX ISA Card, only for base system with PCI
H = RSView32 Runtime 150 with LINX
I = Ethernet PCI and KTXD ISA card, only for base system with PCI
I = RSView32 Runtime 300 with LINX
J = Ethernet PCI and KTC ISA card, only for base system with PCI
J = RSView32 Runtime 1500 with LINX
K = Ethernet PCI and KTCX ISA card, only for base system with PCI
K = RSView32 Runtime with LINX
Z = None
Z = None
Position #9
Power Input/Line Cord
A = 120/240V ac Input with USA power cord
6155 Industrial Computer without Display, B = 120/240V ac Input no power cord
Rackmount
Position #10
Pre–installed Operating System
6155 – _ _ _ _ _ _ _ _ _ _ _ A = MS-DOS v6.22
B = Windows 95
1 2 3 4 5 6 7 8 9 10 11 D = Windows NT Workstation 4.0
Position #1 Z = None
Bulletin Number Position #11
6155 = 4U Rackmount Pre-installed Application Software
Position #2 H = RSView32 Runtime 150 with LINX
Processor and Backplane I = RSView32 Runtime 300 with LINX
DB = Passive 7-Slot ISA/PCI, Pentium 100 MHz J = RSView32 Runtime 1500 with LINX
DE = Passive 7-Slot ISA,/PCI Pentium 166 MHz K = RSView32 Runtime with LINX
DF = Passive 7-Slot ISA/PCI, Pentium 200 MHz with on–board Video Z = None
EB = Active 8-Slot ISA/PCI, Pentium 100 MHz
EE = Active 8-Slot ISA/PCI, Pentium 166 MHz
FB = Passive 13-Slot PCI/ISA, Pentium 100 MHz
FE = Passive 13-slot PCI/ISA, Pentium 166 MHz
6156 Industrial 14-inch CRT Monitor
FF = Passive 13-Slot ISA, Pentium 200 MHz with on–board Video
GF = Active 7 Slot ISA/PCI, PentiumPro 200 6156 – _ _ _ _ _ _ _ _ _ _
HF = Active 4 Slot ISA/PCI, Dual PPro 200
1 2 3 4 5 6 7 8 9 10
Position #3
Base Unit Position #1
Y = Benchtop or Rackmount Bulletin Number
6156 = 14-inch CRT Monitor
Position #4
Video Card Position #2
A = ISA, 1M byte Video Memory Base Unit
C = PCI, 2M bytes VRAM (2 EB or EE req) A = Panel/Rack, (7U) 640 
480 to 1024 
768
D = PCI, 4M bytes VRAM (2 EB or EE req) Position #3
Z = None Touch Screen/Keypads
Position #5 AB = Keypad with 10Fkeys, Resistive Anti-glare Touch Screen
System Memory AD = Keypad with 10Fkeys, Capacitive Anti-glare Touch Screen
C = 8M bytes RAM AZ = Keypad with 10Fkeys, not Touch Screen
D = 16M bytes RAM BB = Resistive Anti-glare Touch Screen only
E = 32M bytes RAM BD = Capacitive Anti-glare Touch Screen only
F = 64M bytes RAM BZ = No Keypad, No Function keys, No Touch Screen
G = 128M bytes RAM Position #4
H = 256M bytes RAM (Option 2 – “GF” and “HF” only) Video Connectors (on Unit)
J = 512M byte System RAM (Option 2 – “HF” only) A = HD15 (standard)
Position #6 B = HD15 and DB13C3
Hard Drive C = HD15 and 4-BNC
C = 1.5+ Gbyte EIDE Position #5
D = 2+ Gbyte EIDE Power Input/Line Cord
Z = None A = 120/240V ac with USA Power Cord
Position #7 B = 120/240V ac with No Power Cord
Removable Media
A = 1.44M byte 3.5-inch Diskette Drive
B = CD ROM Drive (EIDE)
C = 1.44M byte 3.5-inch Diskette Drive and CDROM Drive (EIDE)
Z = None

7-52
 Industrial Computer Products
Ordering Information

6156 Industrial 14-inch CRT Monitor (continued) 6157 Industrial 20-inch CRT Monitors
Position #6
Reserved 6157 – _ _ _ _ _ _ _ _ _ _
Z = None (Option Letter Required)
1 2 3 4 5 6 7 8 9 10
Position #7
Video Cable Position #1
A = HD15-HD15, 1.83m (6 ft) (standard) Bulletin Number
B = HD15-HD15, 4.57m (15 ft) (standard) 6157 = 20-inch CRT Monitor
C = HD15-DB13C, 1m (3.3 ft) Position #2
D = HD15-DB13C3, 5m (16.4 ft) Base Unit
E = HD15-DB13C3, 10m (32.8 ft) AA = Panel/NEMA 4,1024  768 autosync
F = BNC-BNC, 1.83m (6 ft) BA = Panel/NEMA 4, 1280  1024
G = BNC-BNC, 5m (16.4 ft) BB = Rackmount 640  480 to 1280  1024
Z = None BC = Benchtop 640  480 to 1280 
1024
Position #8 BD = Desktop 640  480 to 1280  1024
Serial Cable for Touch Screen BE = Panelmount, NEMA 4, 1280  1024, Front Video Controls
A = DB9F-DB9F, 1.83m (6 ft) Position #3
B = DB9F-DB9F, 5m (16.4 ft) Touch Screen
C = DB9F-DB9F, 10m (32.8 ft) B = Resistive Anti-glare Touch Screen Benchtop (2-BC)
D = DB9F-DB25, 1.83m (6 ft) B = Resistive Anti-glare Touch Screen Rackmount (2-BB)
Z = None B = Resistive Anti-glare Touch Screen Panelmount (2-AA,BA)
Position #9 B = Resistive Anti-glare Touch Screen Panelmount, with Front Controls (2–BE)
Keyboard Extension Cable only
A = 5-pin DIN keyboard extension cable 1.83m (6 ft) (keypads only) C = Resistive Polished Touch Screen Benchtop (2-BC)
B = 5-pin DIN keyboard extension cable 5m (16.4 ft) (keypads only) C = Resistive Polished Touch Screen Rackmount (2-BB)
Z = None C = Resistive Polished Touch Screen Panelmount (2-AA,BA)
C = Resistive Polished Touch Screen Panelmount with Front Controls (2–BE)
Position #10 only)
Reserved D = Capacitive Anti-glare Touch Screen (Bonded) Benchtop (2-BC)
Z = Reserved (option Letter Required) D = Capacitive Anti-glare Touch Screen (Bonded) Rackmount (2-BB)
D = Capacitive Anti-glare Touch Screen Panelmount (2-AA,BA)
D = Capacitive Anti-glare Touch Screen Panelmount (2–BE) only
E = Capacitive Polished Touch Screen Panelmount (2-AA,BA)
E = Capacitive Polished Touch Screen Panelmount with Front Controls (2–BE)
only
F = Surface Acoustic Wave Anit-glare Touch Screen Benchtop (2-BC)
F = Surface Acoustic Wave Anit-glare Touch Screen Rackmount (2-BB)
F = Surface Acoustic Wave Anit-glare Touch Screen Desktop (2-BD)
G = Surface Acoustic Wave Polished Touch Screen Benchtop (2-BC)
G = Surface Acoustic Wave Polished Touch Screen Rackmount (2-BB)
G = Surface Acoustic Wave Polished Touch Screen Desktop (2-BD)
Y = No Touch Screen, Polycarbonate Window (2–BE only)
Z = No Touch Screen, Polycarbonate Window (2–AA, BA only)
Z = No Touch Screen (2–BB, BC, BD, BE)
Position #4
Video Connectors (on Unit)
A = HD15
B = HD15 and DB13C3 (2-AA only)
C = HD15 and 4 BNC
Position #5
Power Input/Line Cord
A = 120/240V ac with USA Power Cord
B = 120/240V ac with No Power Cord
Position #6
Options
A = Mu–metal shadow mask shield (for magnetic fields)
Z = None
Position #7
Video Cable
A = HD15-HD15, 1.83m (6 ft) (for 4-A)
B = HD15-HD15, 4.57m (15 ft) (for 4-A)
C = HD15-DB13C, 1m (3.3 ft) (for 4-B only)
D = HD15-DB13C3, 5m (16.4 ft) (for 4-B only)
E = HD15-DB13C3, 10m (32.8 ft) (for 4-B only)
F = BNC-BNC, 1.83m (6 ft) (for 4-C only)
G = BNC-BNC, 5m (16.4 ft) (for 4-C only)
Z = None

7-53
Industrial Computer Products
Ordering Information

6157 Industrial 20-inch CRT Monitors (continued) 6158 Industrial Monitors with 21-inch CRT,
Position #8 Panelmount (continued)
Serial Cable for Touch Screen
A = DB9F-DB9F, 1.83m (6 ft) Position #9
B = DB9F-DB9F, 5m (16.4 ft) Reserved
C = DB9F-DB9F, 10m (32.8 ft) Z = None (Option letter required)
D = DB9F-DB25, 1.83m (6 ft) Position #10
Z = None Reserved
Position #9 Z = None (Option letter required)
Reserved
Z = Future (option letter required)
Position #10 6159 Industrial Monitors with 17-inch CRT
Accessories
A = Tilt Swivel Base (Benchtop only, 2-BC) 6159 – _ _ _ _ _ _ _ _ _ _
A = Tilt Swivel Base (Desktop only, 2-BD)
B = Slides, Rackmount, Pair 18-inch 1 2 3 4 5 6 7 8 9 10
C = Slides, Rackmount, Pair 24-inch
Z = None Position #1
Bulletin Number
6159 = 17-inch CRT Monitor
Position #2
6158 Industrial Monitors with 21-inch CRT, Base Unit
Panelmount AA = Panel/Rackmount, 1280  1024
Position #3
6158 – _ _ _ _ _ _ _ _ _ _ Touch Screen
A = Capacitive Antiglare Touch Screen
1 2 3 4 5 6 7 8 9 10 B = Resistive Antiglare Touch Screen
Z = Polycarbonate Window, No Touch Screen
Position #1
Bulletin Number Position #4
6158 = 21-inch CRT Monitor Video Connectors (on Unit)
Z = Integral Video Cable, HD15
Position #2
Base Unit Position #5
AA = Panelmount/NEMA 4 Power Input/Line Cord
A = 120/240V ac with USA Power Cord
Position #3 B = 120/240V ac with No Power Cord
Touch Screen
A = Cap-AG Touch Screen Position #6
Y = No Touch Screen, Polycarbonate window Reserved
Z = No Touch Screen, No Polycarbonate window Z = Reserved
Position #4 Position #7
Video Connectors (on Unit) Video Cable
A = HD15 Z = Integral Video Cable, HD15
C = HD15 and 4 BNC
Position #8
Position #5 Serial Cable for Touch Screen
Power Input/Line Cord A = DB9F-DB9F, 1.83m (6 ft)
A = 120/240V ac with USA Power Cord B = DB9F-DB9F, 5m (16.4 ft)
B = 120/240V ac with No Power Cord C = DB9F-DB9F, 10m (32.8 ft)
D = DB9F-DB25, 1.83m (6 ft)
Position #6
Z = None
Options
Z = Reserved (Option letter required) Position #9
Position #7 Reserved
Video Cable Z = Reserved
A = HD15-HD15, 1.83m (6 ft) Position #10
B = HD15-HD15,
5- 5 4.57m
57 (155 ft) Accessories
C = BNC-BNC, 1.83m (6 ft) B = Slides, Rackmount, Pair, 18-inch
D = BNC-BNC, 4.57m (15 ft) C = Slides, Rackmount, Pair, 24-inch
Z = None (Option letter required) Z = None
Position #8
Serial Cable for Touch Screen
A = DB9F-DB9F, 1.83m (6 ft) (for Touch Screen only)
B = DB9F-DB9F, 5m (16.4 ft) (for Touch Screen only)
C = DB9F-DB9F, 10m (32.8 ft) (for Touch Screen only)
D = DB9F-DB25, 1.83m (6 ft) (for Touch Screen only)
Z = None

7-54
 Industrial Computer Products
Ordering Information

6180 Industrial Computers with Flat TFT Displays 6180 Industrial Computer with Flat Display Option
(continued)
6180 – _ _ _ _ _ _ _ _ _ _ _ Position #10
1 2 3 4 5 6 7 8 9 10 11 Operating System
B = Windows 95
Position #1 C = Windows NT Workstation 4.0
Bulletin Number Z = None
6180 = Industrial Computer
Position #11
Position #2 Application Software
Processor & Motherboard D = RSView32 Runtime 150 with LINX
AB = 8-slot Active MB, Pentium 100 MHz E = RSView32 Runtime 300 with LINX
AC = 8-slot Active MB, Pentium 133 MHz F = RSView32 Runtime 1500 with LINX
AD = 8-slot Active MB, Pentium 166 MHz G = RSView32 Runtime with LINX
AE = 8-slot Active MB, Pentium 200 MHz Z = None
Position #3
Base Unit
A = No Display, Metal Bezel, NEMA 1
B = No Display, Front Access Bezel, NEMA 4X indoor
C = 10.4-inch TFT (QuickReplace Backlight), NEMA 4X indoor
D = 10.4-inch TFT (QuickReplace Backlight), Touch Screen,
NEMA 4X
E = 11.3-inch TFT (Standard Backlight), NEMA 4X indoor
F = 11.3-inch TFT (Standard Backlight), Touch Screen, NEMA 4X
G = 10.4-inch TFT with Quick Replace Backlight, Alphanumeric Keypad,
NEMA 4X Indoor
Position #4
Video Card
B = PCI, 2M byte DRAM
C = PCI, 4M byte SGRAM (Base Option A or B only)
Z = None (Base Option A or B only)
Position #5
Gold Plated SIMMS
C = 8M bytes EDO RAM (two 4M byte)
D = 16M bytes EDO RAM (two 8M byte)
E = 32M bytes EDO RAM (two 16M byte)
F = 64M bytes EDO RAM (four 16M byte, banks full)
Position #6
Hard Drive
C = 2.0 Gbyte EIDE
D = 80M byte EIDE Solid State Flash
E = 1.6 Gbyte . EIDE
Z = None
Position #7
Removable Media
A = 1.44-M byte 3.5-inch Diskette Drive, Front Access
B = 1.44-M byte 3.5-inch Diskette Drive, Side Access
C = EIDE CDROM Drive
D = EIDE CDROM Drive and 1.44-M byte 3.5-inch Drive (Side Access)
Z = None
Position #8
Pre-installed Option Cards
B = ETHERNET Card (PCI Bus) Combo, Bus Master
C = KTX Card (Remote I/O Scanner – 1 channel, ISA Bus)
D = KTXD card (Remote I/O Scanner – 2 channel, ISA Bus)
F = KTC card (ControlNet Personal Interface, ISA Bus)
G = KTCX card (ControlNet Deluxe ISA Bus)
H = Ethernet (PCI) card and KTX (ISA) card
I = Ethernet (PCI) card and KTXD (ISA) card
J = Ethernet (PCI) card and KTC (ISA) card
K = Ethernet (PCI) card and KTCX (ISA) card
Z = None
Position #9
Power Cord
A = 120/240V ac, 160 Watt with USA power cord
B = 120/240V ac 160 Watt no power cord

7-55
Industrial Computer Products
Industrial Mouse
(Cat. Nos. 6189-DPMOUSE, -DPMOUSEP)

Features
• Solid-potted mouse that is rugged and wear-resistant
• Resistant to harsh industrial environments (liquids, gases,
and contaminants)
• Maintenance-free and without moving parts
• Connects to either a Microsoft compatible serial interface
(RS-232-C) or PS/2 mouse port on your computer

The Industrial Mouse, which is constructed of stainless steel

and heavy rubber, comes as a tabletop version shown above
that is a fully sealed and submersible mouse (cat. no.
6189-DPMOUSE). A NEMA 4X panelmount version is also
available (cat. no. 6189-DPMOUSEP).

Specifications

Compatibilities
Hardware Interface RS-232 serial port, PS/2 mouse port
Hardware IBM PC, PC-AT compatible computers, PC-XT, PS/2
Compatibilities
Operating System DOS, Windows, OS/2, UNIX and others
Compatibilities
Software Drivers Compatible with standard MS drivers
Serial Data Format Emulates Microsoft or Mouse Systems two-button mouse
Power Consumption Less than 10MA @ 5V dc
Physical
Approximate Overall Desktop: 12.8  10.8  2.5 cm (5.0  4.25  1.0 in)
Dimensions Panelmount: 15.88  13.97  2.11 cm (6.25  5.50  0.83 in)
Approximate Weight 0.9 kg (2.0 lb) including cable
Primary Materials Stainless Steel, silicone rubber buttons, and silicone potting material
Cables Standard - 1.8 m (6 ft) shielded cable with 9-pin D-sub serial connector (PS/2 adapter
included)
Panelmount - Per standard cable, but includes in-line, low-profile disconnect for use with
enclosure cord grips
Environmental
Operating Temperature 0 to 60° C (32 to 140° F)
Non-operating -40 to 85° C (-40 to 185° F)
Temperature
Agency Approval Meets NEMA 4. 4X, 6P, 12, and 13; CE Mark pending; CUR 1950, CUL
Chemical Resistance Bleach, soap, alcohol, oil, saline, Cidex 7
Vibration Operating 2 g, 10-150 Hz
Non-operating 30 g, 10-150 Hz

7-56
 Industrial Computer Products
Industrial PC/AT Keyboards
(Cat. Nos. 6160-KBM1, -KBE1, -KBD1)

Features
Choose the industrial keyboard with the features that best
suits your needs.

Panelmount
Membrane Industrial Tabletop Industrial Tabletop
(cat. no. 6160-KBM1) (cat. no. 6160-KBE1) (cat. no. 6160-KBD1)
• For NEMA 4 control • For harsh • A traditional tabletop
panels or 19-inch environments where a keyboard with
racks tabletop spill-resistant full-travel keys
keyboard is preferred
• Sealed Membrane • Sealed Elastomer • Long-lasting printing
Technology Technology on keys
• Lock LED indicators • Lock LED indicators • Lock LED indicators
• Sealed switches • Durable lightweight • Keyboard cover
construction (cat. no. 6169-KC)
• Protective legend • Tactile response
The Industrial PC/AT Keyboards are lightweight and boast a overcoating
long-life technology. They have EMI/RFI shielding and a
rugged design that helps protect them from many harsh
substances.

Specifications

Panel-mount Membrane Industrial Tabletop Industrial Tabletop

(cat. no. 6160-KBM1) (cat. no. 6160-KBE1) (cat. no. 6160-KBD1)
NEMA Rating NEMA Type 4 and 12 rated (panel NEMA Type 13 rated Not Applicable
mount only)
Mounting #10-32 threaded studs; keyboard has two extension legs
nuts for its 16 studs
Mounting Holes (diameter) 7.14 mm (.281 in) Not Applicable
Dimensions 483  222  25.4 mm 448  194  31.7 mm 489  213  38.1 mm
(19  8.75  1 in) (17.625  7.625  1.25 in) (19.25  8.375  1.5 in)
Footprint 165.73 mm (6.525 in) 193.04 mm (7.6 in) 210.82 (8.3 in)
Number of Keys 101 (changeable legends) 101 101 (102 international)
Key Total Travel Not Applicable 1.0 mm (.04 in) 3.8 mm (.150 in)
Key Actuating Force Not Applicable 150 gm (5 oz) 308 gm (11 oz)
Operating Termperature 0 to 55° C (32 to 131° F)
Storage Temperature -40 to 65° C (-40 to 149° F)
Humidity (operating and non-operating 5 to 95% (without condensation)
Altitude (operating) 3,657.60m (0 to 12,000 ft)
Input Power 350 ma (maximum) @ 5V dc
250 ma (typical) @ 5V dc
Serial Input/Output IBM-enhanced AT-compatible
Computer End Standard 5-pin DIN connector - 7 ft extended shielded coil cord (PS/2 adapter included)
Shipping Weight
Alphanumeric keypad: 308 gm (11 oz) 1.13 kg (2 lb, 8 oz) 1.47 kg (3 lb, 4 oz)
Function keypad: 616 gm (22 oz) 1.5 kg (3 lb, 5 oz) 1.9 kg (4 lb, 3 oz)

7-57
Operator Interface Enclosures
ViewPort Operator Interface Enclosures
(Cat. No. 1891 Series)

Ordering Information
You can order PanelView products housed inside ViewPort
enclosures only through the Industrial Automation Systems
Flex Factory Team (see page 11-11).
Base configuration includes an adjustable tilt and swivel
assembly, which provides for tabletop and pedestal
mounting, and can be easily modified for wall or overhead
mounting by removing the swivel assembly and base plate.
When placing an order, use the tables below to identify two
catalog numbers: one representing the ViewPort enclosure
and one representing the PanelView terminal (see
Compatibility below).

1891-VP4 __ __ __
1 2 3
ViewPortt Operator Interface Enclosures are tabletop, Description Options
wall-mount, overhead-mount, and pedestal-mount 1 ViewPort housing O Aluminum housing (NEMA 12/4)
enclosures designed to house PanelView 1200, 1200e, and X Stainless steel housing (NEMA 4x)
1400e terminals in harsh or hazardous environments.
2 Cable entry plate * O Conduit knock-out
The ViewPort housings are either aluminum (NEMA 4) or G Gasketed cable-way
stainless steel (NEMA 4X). An optional Z-purge is available 3 Optional purging ** O No purge
for hazardous environments such as Class I, Division 2 Z Z-purge
areas. Each ViewPort enclosure comes fully assembled with * The conduit knock-out plate is required for NEMA 4, NEMA 4x, and
the selected PanelView terminal already installed. Z-purge installations. The gasketed cable-way reduces the overall
ViewPort enclosure rating to NEMA 12.
** Z-purging is for Class I, Division 2 environments. Touch-screen
Features PanelView terminals are not suitable for Class I, Division 2 environments.
• Adjustable tilt assembly allows up to 30° of movement and You can also order a steel (cat. no. 1891-PED) or stainless
includes a locking disk to maintain the desired viewing steel (cat. no. 1891-PEDX) fixed mounting pedestal. The
angle pedestal, which weighs 95 pounds and is 38 inches high,
• Swivel assembly provides for 180° of horizontal rotation has a 12-inch  12-inch base plate and four 0.5-inch
diameter mounting holes. Pedestals are shipped separately.
• Base plate of 20 inches  20 inches with rubber feet
provides anchor-free table top mounting Compatibility
• A universal mounting trunnion provides for wall or ViewPort enclosures can house the following A-B products:
overhead mounting
• Thumbscrews on removable front plate and rear panel PanelView 1200 PanelView 1200e PanelView 1400e
Terminals Terminals Terminals
provide easy access
page 7-42 page 7-40 page 7-40
• Handles on front plate allow for quick removal of the • 2711-KA11 • 2711E-K12C61 • 2711E-K14C61
PanelView terminal for servicing • 2711-KC11 • 2711E-K12C6L21 • 2711E-T14C6
• Removable rear panel facilitates direct power and • 2711-TA1 • 2711E-T12C4
communication wire termination • 2711-TA4 • 2711E-T12C6
• Optional gasketed cable-way simplifies field installation by • 2711-TC1
eliminating the need for conduit knock-outs • 2711-TC4
1 The Z-purge version of the ViewPort (cat. no. 1891-VP400Z or
• Fully warranted by the Rockwell Automation
1891-VP4X0Z) is Factory Mutual Research Approved with these
Allen-Bradley products for Class I, II, Division 2; Groups A, B, C, D, E, F,
G. Be aware that Class II, Group E must be rated as Division 1.
Touch-screen CRT devices are not suitable for Class I, Division 2
installations.

For specifications and dimensions, see page 7-59.

7-58
 Operator Interface Enclosures
ViewPort Operator Interface Enclosures
(Cat. No. 1891 Series)

Specifications
Catalog 1891-VP4000, -VP40G0 Weight 40.9 kg (90 lb)
Numbers --VP4X00 (without PanelView terminal)
Temperature External cooling is not required if ambient temperatures do not exceed 43° C (110° F)
1891-VP4000,
89 - --VP400Z Internal material Aluminum
External material Painted aluminum [Paint: S-W Polane T-Plus, Textured (charcoal gray)]
1891-VP4X00,
89 - VP4X0Z Internal material Aluminum
External material Stainless steel
1891-VP400Z, 1891-VP4X0Z Weight 54.5 kg (120 lb)
(without PanelView terminal)
Temperature External cooling is not required if ambient temperatures do not exceed 43° C (110° F)
Z-purge pneumatic • Inert gas supply requirements of 80 to 100 PSI.
• Approximate air/gas consumption:
- Normal operation: 7-10 SCFH
- Rapid exchange: 240 SCFH for 10 min.
- Average enclosure pressure 0.25-0.50 in.
Z-purge electrical • 120V, 60Hz, 15A maximum
• Internal 4-outlet surge suppressor
• Alarm contact, 15A maximum

Dimensions
ViewPort 1891-VP4000 (Aluminum) and -VP4X00 (Stainless Steel) Enclosures
50 mm
(1.95 in)
561.3 mm 25.4 mm 504.1 mm
(22.10 in) (1 in) (19.85 in)

Viewport
Enclosure
432 mm 30° Positive 432 mm
(17 in) Lock Tilt (17 in)
Adjustment
Allen-Bradley
PanelView
Terminal
140 mm 140 mm
(5.50 in) (5.50 in)
Base Plate 180° Swivel Universal Mounting
660.4 mm Adjustment Trunnion
(26 in) 20784–M

ViewPort 1891-VP400Z (Aluminum) and -VP4X0Z (Stainless Steel) Enclosures with Z-purge
504.1 mm
561.3 mm 25.4 mm (19.85 in)
(22.10 in) (1 in)
432 mm 411.4 mm
(17 in) (16.20 in)

purge system
335 mm enclosure 335 mm purge system
(13.18 in) (13.18 in) enclosure
30° Positive
Lock Tilt
Adjustment
ViewPort
432 mm 432 mm Enclosure
(17 in) (17 in)
Universal Allen-Bradley
Mounting PanelView
Trunnion Terminal
140 mm 140 mm
(5.50 in) (5.50 in)
Base Plate 180° Swivel Universal Mounting
660.4 mm Adjustment Trunnion
(26 in) 20785–M

7-59
Overview of NEMA Types
Operator Interface

Some of the operator interface products covered in this section have NEMA ratings. This page provides an overview of the
NEMA Types referenced in this section. For complete definitions, descriptions, and test criteria, see the National Electrical
Manufacturers Association (NEMA) standards Publication No. 250.

NEMA 4 NEMA 12
Type-4 enclosures are intended for indoor or outdoor use primarily to Type-12 enclosures are intended for indoor use primarily to provide a
provide a degree of protection against windblown dust and rain, degree of protection against dust, falling dirt, and dripping
splashing water, and hose-directed water; and to be undamaged by non-corrosive liquids. They are designed to meet drip (no water has
the formation of ice on the enclosure. They are designed to meet entered enclosure during specified test), dust, and rust-resistance
hosedown, dust, external icing (undamaged after ice which built up tests. They are not intended to provide protection against conditions
during specified test has melted but not required to be operable while such as internal condensation. Refer to NEMA publication no. 250 for
ice-laden), and rust-resistance design tests. They are not intended to complete test specifications.
provide protection against conditions such as internal condensation or
internal icing. Enclosures are made of heavy gauge stainless steel,
cast aluminum or heavy gauge sheet steel, depending on the type of NEMA 13
unit and size. Cover has a synthetic rubber gasket. For complete
definitions, descriptions, and test criteria, see the National Electrical Type-13 enclosures are intended for indoor use primarily to provide a
Manufacturers Association (NEMA) standards Publication No. 250. degree of protection against dust, spraying of water, oil, and
non-corrosive coolant. They are designed to meet oil exclusion and
rust resistance design tests. They are not intended to provide
protection against conditions such as internal condensation. Refer to
NEMA 4X Non-Metallic, Corrosion-Resistant
NEMA publication no. 250 for complete test specifications.
Fiberglass Reinforced Polyester
Type-4X enclosures are intended for indoor or outdoor use primarily to
provide a degree of protection against windblown dust and rain,
splashing water, and hose-directed water; and to be undamaged by
the formation of ice on the enclosure. They are designed to meet
hosedown, dust, external icing (undamaged after ice which built up
during specified test has melted but not required to be operable while
ice-laden), and rust-resistance design tests. They are not intended to
provide protection against conditions such as internal condensation or
internal icing. Enclosures are fiberglass reinforced polyester with a
synthetic rubber gasket between cover and base. Ideal for such
industries as chemical plants and paper mills. For complete
definitions, descriptions, and test criteria, see the National Electrical
Manufacturers Association (NEMA) standards Publication No. 250.

7-60
 Supervisory Control and MMI Software
MMI Software Overview

RSView Software RSTrend Software

RSView software (page 7-62) provides monitoring, control, RSTrend software (cat. no. 9304-WTD300) is the Microsoft
and data acquisition functions in the Microsoft Windows Windows 32-bit software tool you need for data acquistion,
32-bit environment. Through its open platform, RSView data scaling, trending, and logging of real-time and historical
software guides you through your automation process and data (page 7-66). You can accurately measure data values
gives you ODBC, OLE, and DDE capabilities. RSView on the graph, which makes data comparison and analysis
software provides object-oriented graphics with animation, fast and easy. Data is logged to a .dbf file, so that you can
open database format, trending, alarming, data logging, use third-party packages for other data manipulation.
derived tags, and event detection. RSTrend software is a DDE client that lets you integrate
WINtelligent LINX software with DDE servers.

WINtelligent VIEW Software

ControlView Software
WINtelligent VIEW software (page 7-64), industrial software
that takes advantage of the powerful Microsoft Windows ControlView Software (page 7-67) is the MMI/Supervisory
16-bit environment, lets you develop and run animation, software you need to monitor and control real-time data in
alarms, data analysis, security, and an action/reaction the MS-DOS environment. The ControlView tools let you
system. VIEW software communicates via AdvanceDDE, animate your process, configure your databases, alarms,
which enhances DDE communication between Microsoft trends, event detectors, data logs, and derived tags. With
Windows applications. ControlView software, you can customize your applications
to meet your needs.

WINtelligent RECIPE Software

RSTools and RSWorkbench Products
WINtelligent RECIPE software (cat. no. 9304-WRM300D)
helps you manage data (page 7-65). It uses a spreadsheet RSTools ActiveX Controls (page 7-71) and RSWorkbench
for downloading values and .csv file formats for storing Development Environment (page 7-73) are part of a new
values. With RECIPE’s scheduler, you can download recipes family of ActiveX controls that provides a component
at specific times or based on events. RECIPE software is a approach to monitoring, control and data acquisition
DDE client that lets you integrate WINtelligent LINX software functions in the Microsoft Windows NT or Windows 95
with DDE servers. environment.

RSPower Software
The RSPowert power device and monitoring tool (page
7-70) is a Windows-based software program that accurately
represents power systems in your facility by configuring and
displaying data from Allen-Bradley Bulletin 1400
Powermonitors.

7-61
Supervisory Control and MMI Software
RSView Software
(Cat. No. 9301 Series)

• Object-oriented graphics. With sophisticated

object-oriented graphics, RSView software makes
development fast and easy. With OLE drag and drop,
RSView software lets you easily choose from a large
selection of library objects — gauges, tanks, pipes,
faceplates, buttons, and many more. Based on Microsoft
standards, RSView software’s graphics editor lets you
drag-and-drop from a library, cut/paste objects from the
clipboard internal and external to RSView software,
develop and display in any video resolution, as well as
import third-party graphics, .dxf, .bmp, .wmf. To make the
graphic displays more useful, you can embed trends,
numeric displays, alarm summaries, and OLE applications
into graphic screens.
• Productivity tools. RSView software provides tools that let
you keep your process up and running while making
changes. Edit graphic displays while running other
RSView Software provides monitoring, control, and data displays, test animation from within the graphics editor
acquisition functions in the Microsoft Windows 32-bit before going online with a PLC processor, and modify tag
environment. It uses an open-platform to guide you through addresses, node addresses, PLC networks, and device
your automation process, thus giving you ODBC, OLE, and drivers on the fly.
DDE capabilities.
• Animation links. RSView software is the only application
RSView software provides interoperability between Rockwell that includes an object editing mode — the ability to
Software and Microsoft products. It improves upon traditional modify attributes of a custom object without first
methods for MMI functionality by providing object-oriented destroying the object and rebuilding it later. The individual
animation of graphics, an open database format, .DBF parts or the entire object can be animated with position,
historical data storage, and enhanced capabilities for fill, touch, visibility, rotation, OLE Verb, and other
trending, alarming, derived tag creation, and event detection. animation controls. RSView software introduces Object
Smart Path, the ability to interactively select animated
object sizes and positions, leaving painstaking details of
counting pixels a thing of the past.
Benefits
• Open Database Connectivity (ODBC).. Open Database
• Interoperability with WINtelligent LINX, WINtelligent Connectivity is a standard developed by Microsoft that lets
RECIPE, and WINtelligent LOGIC software, and database formats become available to third-party tools.
PanelView 1200e terminals. Interoperability with Rockwell All RSView tag and system configurations are stored in an
Software and A-B products adds functionality and saves ODBC compliant database, which allows configuration
time. WINtelligent LINX software provides DDE drivers for creation/modification from a long list of third-party tools.
Allen-Bradley, Modicon, Square D, GE, Reliance, plus These third-party tools can be used to create custom
over 100 third-party companies that are currently reports and to merge the contents of the configuration with
developing DDE drivers for LINX software. In addition, other databases.
interoperability with LINX software offers full functionality
of all LINX tools such as SuperWho, used for showing • OLE (Object Linking and Embedding). RSView offers
network configuration, and LINX diagnostic tools. There’s complete OLE support, which allows third-party OLE
no need to develop tags twice. Browse and select applications to be seamlessly embedded into RSView
WINtelligent LOGIC and A.I. tags, and use them in graphic displays for in-place editing. In-place editing
RSView software’s applications. Display a specific rung of makes all the functionality of the original application
ladder logic in response to an event such as an alarm. available from within RSView software, which extends
Interoperability with WINtelligent RECIPE software and RSView software’s capabilities beyond that of traditional
PanelView 1200e terminals helps prevent MMI. For example, RSView software can contain an
re-development. Download a WINtelligent RECIPE based Excel spreadsheet whose contents can be modified
on demand. Share tags between RSView software and directly from RSView displays while maintaining full Excel
spreadsheet functionality.
PanelView 1200e terminals.
(Continued)
• Interoperability with Microsoft products. RSView software
is interoperable with Microsoft products such as Excel,
Word, crystal reports, and Visual Basic.

7-62
 Supervisory Control and MMI Software
RSView Software
(Cat. No. 9301 Series)

Built to Order
We offer built-to-order combinations of the following RSView
products so you can select the bundle you want to use to
create, test, and run your operator interface applications.
• RSView Software lets you create, test, and run your
applications in the Microsoft Windows 32-bit environment.
It provides a development system with runtime
functionality in sizes of 150, 300, 1500, or 32,000 tags
that give you data acquisition, supervisory monitoring and
control, and information management functions.
• Device Drivers communicate with the A-B complete line
of PLC processors over DH+, DH-485, DF1, and
TCP/IP-over-Ethernet networks.
• DDE Drivers communicate via WINtelligent LINX drivers
to programmable controllers and other DDE server
applications.
Benefits (continued)
• Alarms. RSView alarming has digital and analog alarms Ordering Information
with 8 thresholds and 8 levels of severity. Alarm
summaries can be embedded directly into RSView Catalog Number Product
displays for quick viewing of one or all alarms. Analog 9301-2SE-2400 RSView Works
alarming contains provisions for indirect threshold 9301-2SE-2401 RSView Works with WINtelligent LINX for
assignments from other RSView tag values, removing the A-B processors (LINX for A-B)
headache of working with seasonal alarming. Digital 9301-2SE-3400 RSView Runtime
alarming allows alarms to be set when data values
9301-2SE-3401 RSView Runtime with LINX for A-B
change state, and each alarm can be logged or printed
and filtered with a variety of tools. 9301-2SE-2300 RSView Works 1500
9301-2SE-2301 RSView Works 1500 with LINX for A-B
• Trends. RSView trend capabilities are flexible — data can
9301-2SE-3300 RSView Runtime 1500
come from real-time data values or from historical data
files. You can display information even when data isn’t 9301-2SE-3301 RSView Runtime 1500 with LINX for A-B
being logged. The capability of 16 pens per trend and the 9301-2SE-2200 RSView Works 300
ability to display as many trends as desired gives RSView 9301-2SE-2201 RSView Works 300 with LINX for A-B
software increased flexibility. Finally, trend objects can be
9301-2SE-3200 RSView Runtime 300
transparent, allowing the comparison between actual and
predicted values. 9301-2SE-3201 RSView Runtime 300 with LINX for A-B
9301-2SE-2100 RSView Works 150
• Networking features. RSView software provides
9301-2SE-2101 RSView Works 150 with LINX for A-B
capabilities to create a networked system. RSView nodes
can retrieve most configuration data from a file server. 9301-2SE-3100 RSView Runtime 150
RSView software relies on AdvanceDDE format for 9301-2SE-3101 RSView Runtime 150 with LINX for A-B
optimum throughput. Global alarming and remote
historical data retrieval further facilitate multi-node
operations to create a flexible, easily maintained system. System Requirements
• Communication. RSView software’s robust Operating System • Windows 95
communication system dynamically optimizes for • Windows NT (future release)
minimum network traffic and optimum performance; does PLC Processor • PLC-2 processor
error checking on a per tag basis; and hot switches • PLC-3 processor
between drivers on error. RSView software lets you • PLC-5/250 processor (supported with WINtelligent
Linx software DDE tags)
choose between direct drivers for A-B processors or DDE
• PLC-5 (Enhanced, Ethernet, Local I/O)
servers. RSView software supports WINtelligent LINX • SLC 500 family of processors
software, Data Highway Plus, DH-485, DF1, and Ethernet
Networking • Supports any Windows-compatible network
for A-B processors as well as available DDE drivers for
other programmable controllers and devices.

7-63
Supervisory Control and MMI Software
WINtelligent VIEW Software
(Cat. Nos. 9304-WVD300, -WVR300, -WVD256, -WVR256, -WVD128, -WVR128)

WINtelligent VIEW 16-bit Windows software is a visual System Requirements

graphics system that simultaneously modifies and animates
data values (data points) through state changes, bargraphs, • IBM compatible 486 33-MHz computer
numeric, string, color changes, embedded trends, and slider • MS-DOS v5.0 operating system
bars to animate values. The Action/Reaction system
automates WINtelligent VIEW software. • Microsoft Windows v3.1 operating system

VIEW software communicates through AdvanceDDE • 16M-byte RAM

servers, such as Rockwell Software LINX products, or any • 20M-byte hard disk space
Windows DDE-compliant server.
• 16-color VGA graphics adapter
• any Windows-compatible pointing device
Features
• Provides several tools for process variable animation: the
bargraph, vessel fill, color change, and numeric Ordering Information
animations can have 64 different levels for color change Catalog Number Product Characteristics
based on process variable value
9304-WVD300 3,000-tag development system with one 3,000-tag
• Includes ASCII string, PC date, PC time, buttons, alarm runtime
views and embedded trends 9304-WVR300 3,000-additional-tag runtime
• Can trend up to 16 process variables per animation and 9304-WVD256 256-tag development system with one VIEW 256-tag
log data to a DBF file format runtime

• Contains simple dialog boxes that let you easily configure 9304-WVR256 256-additional-tag runtime
display formats, operator functions, and scaling 9304-WVD128 128-tag development system with one VIEW 128-tag
runtime
• Has a visual action/reaction system that handles all
operator input (alarming, product interaction, downloading 9304-WVR128 128-additional-tag runtime
values, and screen display); users configure actions and
reactions with simple dialog boxes rather than with script
programming
• Links logical expressions together to trigger one or more
reactions
• Can play sounds for different alarms or change a picture
based on severe alarms
• Acts as an industrial program manager for factory-floor
use and can start or bring focus to other applications;
sends keystrokes and interaction commands (DDE
Execute) to other applications and reads and writes to
DDE Items. These reactions can be triggered by process
variable change, keyboard keys or buttons.

7-64
 Supervisory Control and MMI Software
WINtelligent RECIPE Software
(Cat. No. 9304-WRM300D)

WINtelligent RECIPE software is a Microsoft Windows-based • Lets you display and edit multiple recipes at the same
application for managing industrial process control recipes time as well as cut, copy, and paste from one recipe to
used with programmable controllers. With RECIPE software another
you can upload data from a live process and store the data in
• Since each recipe can contain multiple address and data
an existing recipe or you can download existing recipes to
sets, you can define a different range of addresses and
your process and manufacturing applications. RECIPE
also maintain a variety of values for each ingredient
software’s verification and confirmation options tell you
defined in your process
whether or not valuable data has been downloaded
successfully. • Records basic recipe actions: upload, download, preview,
and manual entry, and upload and create recipe unit.
The log file contains a date/time stamp, recipe action
Features description, operator login ID, recipe name and recipe file
name with path
• Displays live process data and the currently selected
recipe data in a side-by-side comparison and highlights
any mismatches for fast visual reference
System Requirements
• Works with applications that generate DDE Execute
• IBM compatible 486 33-MHz computer
requests to:
- upload, download, preview, and manually change • MS-DOS v5.0 operating system
process data • Microsoft Windows v3.1 operating system
- upload and create new recipe unit
- display runtime interface • 8M-byte RAM
- enable, edit, disable scheduler
• 10M-byte hard disk space
- create new recipe or open existing recipe
• Includes a wizard that builds DDE Execute commands • 16-color VGA graphics adapter
and, therefore, reduces the time needed to create the
command string
• Can be a standalone system through the use of a runtime
interface

7-65
Supervisory Control and MMI Software
RSTrend Software
(Cat. No. 9304-WTD300)

RSTrend software is a simple, yet powerful 32-bit application • Reporting. RSTrend software offers three types of
for collecting and monitoring real-time and historical PLC reporting: project, numeric, and graphical. Project
data for Microsoft Windows, Windows 95, and Windows NT reporting contains all information necessary for
operating systems. RSTrend software provides several documenting the project, including all log-point
display formats for the logged data including the familiar information, trend setup, and program settings.
strip-chart recorder. Trend graphs can be scaled
automatically or manually. Data reporting is divided into numerical and graphical
types. A numerical report consists of a table of data
RSTrend software can log data by time, event, unsolicited, or values based on a selection of log points and required
continuously. Data can be acquired from the PLC time range. Graphical reporting contains a print-out of the
processor’s data table or from a Windows-compliant DDE displayed trend graph, including colors and a variety of
driver. RSTrend software is designed to work with all line styles and polymarkers. Black and white or color
members of the Allen-Bradley family of programmable reports may be printed on any Windows, v3. 1 or later,
controllers as well as other controllers. Data is logged to disk supported printer.
using the standard DBFt file format.
With RSTrend software’s simple tab dialog menu system, Additional Features
you can set up and begin logging data in minutes. • Batch logging with batch ID
• Flexible file naming and file cutting options
Features • Log to primary and/or backup disks
• Event-based Logging. Start or stop logging using global • Formula support to scale PLC values into engineering
events based on time, PLC values, or DDE events. Each units
trend can contain a unique Start/Stop log “expression,”
which can include up to 11 variables. • Value bar displays exact numeric values on graph

• Displaying Real-time and Historical Data. RSTrend can • Security through user Login/Logout
simultaneously display real-time and historical data. • Log on change with an adjustable “Deadband”
RSTrend software’s flexible trend viewer provides pan and
zoom options and VCR buttons to adjust the graph to suit
your needs. Advanced viewer options are provided for
Typical Applications
X-Y plots, profiles, and overlays. Viewer settings can be
• Process monitoring • Maintenance
saved in templates and workspaces.
• Historical trending • Diagnostics
• WINtelligent Historian and Data Viewer. The WlNtelligent
• Batch logging • Reporting
Historian provides a familiar “Calendar” type display for
viewing real-time or historical data. Days that contain
logged data “light up” in green. Select one or more days System Requirements
and press “Display” to display one or more views of the
historical data. With the Historian, you can copy data to • IBM compatible 486 33-MHz computer
another application (e.g. Microsoft Excel) for viewing or • MS-DOS v5.0 operating system
analysis.
• Microsoft Windows v3.1 operating system
The Data Viewer provides a numeric display of the logged
data, which can be displayed in floating-point, integer, or • 8M-byte RAM
binary formats. A search option lets you quickly find • 40M-byte hard disk space
values in the data.
• 16-color VGA graphics adapter

7-66
 Supervisory Control and MMI Software
ControlView Software
(Cat. No. 9302 Series)

ControlView software is the MMI/Supervisory software you Additional Features

need to monitor and control real-time data in the MS-DOS
environment. The ControlView tools help you animate your • Use DDE to communicate between ControlView software
process and configure your databases, alarms, trends, event and other Windows-based applications over a network
detectors, data logs, security, recipes, and derived tags. • Use “C” Toolkit to develop custom applications to work
With ControlView for DOS options, you can customize your with ControlView software
applications to meet your needs. ControlView software lets
you develop either in the Microsoft Windows or MS-DOS • Design high-level reports using database information,
environment. Both operating systems use the same data logger files, and activity log files
multi-tasking Runtime (Chronos) system for DOS. • Supports Allen-Bradley Modicon, Siemens, Texas
Instruments, and GE drivers
Features
See page 7-68 for a typical configuration drawing.
• Graphics/Animation Links. Design and animate your
process through the MouseGRAFIX editor. Combine Ordering Information
animation links to create complex processes. In addition,
Catalog Number Product Characteristics
ControlView software gives you the tools for linking
displays and creating an overall application structure 9302-CV ControlView for DOS System
that’s easy for operators to use. 9302-RT ControlView for DOS Runtime
9302-CV3 ControlView for DOS 300 System
• Trends. Trend displays can plot realtime data or can
retrieve data from historical data logger files for analysis. 9302-RT3 ControlView for DOS Runtime 300
Plot as many as 16 pens at one time. Trends can show 9302-RT15 ControlView for DOS Runtime 1500
changes in tag values over time or relationships between 9302-BLD ControlView for DOS Builder
tag values. Log data periodically based on event or on 9302-BLDRT ControlView for DOS Builder and Runtime
demand.
9302-BLDRT3 ControlView for DOS Builder and Runtime 300
• Alarms. Alarms are flexible and easy to use. Alarms are
set up based on thresholds and can be assigned different System Requirements
levels of severity. This lets you assign the action based
on the severity. For example, a low severity might print a MS-DOS operating system. [ControlView for DOS Builder
message, while a high severity alarm might ring a bell. (cat. no. 9302-BLD) runs on Windows v3.1 or Windows 95
operating system.]
• Event Detector. Use ControlView Event Detector to
trigger actions based on an event. For example, initiate a Software and Hardware Recommendations
data logger model snapshot, start another application,
display a help window, set a tag in the database. For ControlView hardware and software platform
recommendations, see ControlView Recommended
• Runtime. For the MS-DOS power users, ControlView Hardware and Software Platforms, publication 6190-2.5.
software is the only MMI/Supervisory Control software that
has true pre-emptive multi-tasking within the MS-DOS
environment. This allows you to achieve maximum data
integrity, while simultaneously monitoring your real-time
data with graphics, alarms, and trend charts.

7-67
Supervisory Control and MMI Software
ControlView Software
(Cat. Nos. 9302 Series)

Typical Configuration
Hewlett-Packard
PC running RSView, RSTrend, and
WINtelligent RECIPE Software
VAX

Ethernet network

Computer
Ethernet Gateway
running
ControlView
Software
Ethernet
Interface
Module PLC-5/40E
processor

File Server

Ethernet network

Computer with Computer

1784-KTX card running
running ControlView
ControlView Software via Network to:
Software Ethernet • Modbus Programmable Controllers
RS-232 • Siemens Programmable Controllers
• GE Programmable Controllers
• TI Programmable Controllers
DH+ network DH+ network

PLC-5/15 PLC-5/25 PLC-5/15 PLC-5/25

processor processor processor processor

1770-KF3
DH-485 network

SLC 5/01 processor 1747-AIC SLC 5/01 1747-AIC SLC 500 SLC 500
1747-AIC 1747-AIC SLC 500 1747-AIC
in 20-slot modular system fixed 30-I/O fixed 40-I/O
fixed 20-I/O processor in 7-slot controller
controller modular system controller with
expansion rack 18659

7-68
 Supervisory Control and MMI Software
Process Configuration and Operation (PCO) Software
(Cat. Nos. 6723-PCO, -PCS, -PFP)

Once the process functions are configured and the PLC

processor code is integrated, the PCO MMI faceplates allow
online operation, control, and maintenance of the process
loops. PCO MMI interface graphics or faceplates are
provided for software packages from Rockwell Software and
A-B Encompass Program partners.

Features
• Analog I/O, process control, and discrete control functions
that you configure instead of program. PCO’s function
logic saves you valuable time and reduces the risks
associated with writing custom routines each time you
use these functions. PCO’s consistent, structured
implementation of these functions also saves you time in
developing, debugging, and maintaining your system
• Addresses the complete system — from the I/O to the
PCO Software (cat. nos. 6723-PCO, -PCS, -PFP) lets you operator interface — thru factory-written functions and
develop your process more quickly and easily using familiar factory-configured runtime faceplates
tools. By simplifying the integration of analog I/O modules, • Runs on A-B PLC-5/20, -5/30, -5/40, -5/60, and -5/80
PLC processors, discrete devices, and operator interface processors, and works with many of the leading operator
workstations, PCO lets you make incremental, cost-effective interfaces, including Rockwell Software RSView Software
process improvements as you develop your PLC and PanelView workstations
processor-based control system. The software was
• Contains process functions with an Excel-based
developed as a Windows application and is compatible with
configuration template for each. You just fill in the blanks
v3.11, Windows 95, and Windows NT v3.51 or greater.
and download the information to your PLC processor
You’ll start working with PCO by using a Windows-based
• Uses an enhanced PID algorithm, so you need to
Excel application to identify and configure your process
configure only for simple or complex loop control. For a
functions. You can then add the PCO functions to your
15-loop system, we estimate a time savings of 16-24
existing PLC processor programs using Rockwell Software
hours for general layout and definition, and 3 hours of
PLC-5 A.I. Series Programming Software or RSLogix 5
coding/testing per loop
Software. PCO’s pre-developed Excel spreadsheets have
interfaces in the PLC processor that enable Excel to For more information, see: Take Control of your Application with PCO
communicate directly to the PLC processor over the Data Software Product Overview, publication 6190-2.1.
Highway Plus, Ethernet network, serial port or ControlNet
network.

Typical Configuration
6723 Series PCO (Windows-based)
RSView Software
(or other operator interface software)
RSView Options1
PCO process functions work with:
RSView Runtime Faceplates • A-B 1771 analog modules, Block I/O, FLEX I/O
Analog I/O Process Functions Device Driver • Rockwell Software RSView Software and other PSP
Excel-based Configuration Screens operator interface software
Analog I/O Process Functions Device Driver
Development Station /
Automatic Tag Database
• PLC-5 Family of processors
DH+
network
Operator Interface
Analog I/O Process Functions Device Driver • PLC-5 programming tools:
Data Table Allocation / Interface Structure PLC-5 A.I., WINtelligent LOGIC 5 software
Analog I/O Process Functions Device Driver • ControlNet, Remote I/O, Data Highway Plus networks
Configurable Analog I/O Subroutine
• Includes templates for 1771-IFE, -IL, -IR, -IXE,
-IXHR, -N Series, -OFE, and -QRD/CFM modules,
as well as Block I/O and FLEX I/O
PLC-5 processor Configurable Process Control Functions
• PID • Split Range Time The shaded portions of this figure identify
• Function Generator Proportioning what you receive with PCO Software.
• Lead Lag • Totalizer
• Scheduler • Hi-Lo Alarm 1 See page 7-62 for a list of RSView Options.
Universal Configurable Discrete Device Subroutine
Remote • 0-, 2-, and 3-state device drivers
I/O link Full Alarm / Diagnostics Capability
I/O Chassis
• PLC Diagnostic Alarms
• Diagnostics for each PCO function
• Runtime Alarms for each PCO function
PanelView Interface Drivers
Your Application Program
PanelView Runtime Faceplates
PanelView 1200 Operator Interface for the process functions

7-69
Software Components
RSPower Software
(Cat. Nos. 9307-RSPDEVD, -RSPRTD)

Features
• Quickly configure power devices. Download or upload
configuration settings between physical power monitors
and the RSPower software.
• Create custom graphical displays. Use a toolbox of
graphical elements to create drawings that include objects
such as three-phase wiring runs, transformers, breakers,
and motors.
• Provide quick access to power system data. Configure
objects such as analog meters, digital meters, and bar
graphs that report values back to operators during
run time.
• Set up trends and alarms that report values back to
operators during run time and record historical data in
standard database .DBF file format.
The RSPowert power device and monitoring tool is a • Display all power system parameters from all configured
Windows-based software program that accurately represents power devices in an easy-to-read spreadsheet format.
power systems in your facility by configuring and displaying
data from Allen-Bradley Bulletin 1400 Powermonitors. • Proven Universal Remote I/O link transfers data quickly
and efficiently from power monitor devices to RSPower
With RSPower software, you can configure power devices, software. Use either a PLC-5 or an SLC 5/03 or SLC 5/04
create custom graphical displays, and begin monitoring processor as the gateway to the Universal Remote I/O
power systems within minutes of installing the software. Like link. Because power monitor data passes through the
many other Rockwell Software products, RSPower software processors without even entering its memory space, you
runs on Microsoft Windows v3.x, Windows for Workgroups, don’t have to program the processors in order to run
and Windows 95 operating systems. RSPower software.
Intuitive configuration procedures, a well-stocked graphical
toolbox, and easy navigation make RSPower software a
valuable tool for creating data monitoring systems in your System Requirements
facility. • 486DX2 66 MHz personal computer with a minimum of
RSPower software includes two separate programs as 16M bytes memory
described in the table below. • Windows 3.x, Windows for Workgroups, or Windows 95
operating system
RSPower Type of
Program Software Function • Enhanced PLC-5 processor with at least 1 Universal
RSPowerCFG Configuration Configures power devices and Remote I/O scanner port or a SLC 5/03, or SLC 5/04
Software provides tools for creating graphical processor [if you’re using a SLC processor, you also need
displays to monitor power a SLC 500 Remote I/O Scanner (cat. no. 1747-SN/B),
RSPowerRUN Runtime Displays real-time power system page 3-7]
Software data, trends, and alarms in
custom-designed graphical displays. • DH+, DH-485, Ethernet, or channel 0 for connecting the
Records historical trend and alarm personal computer to the network
data in standard database files. You
can open these files in any Windows
application that accepts .DBF files.
Ordering Information
Catalog Number Product
9307-RSPDEVD RSPowerCFG and RUN
9307-RSPRTD RSPowerRUN

7-70
 Software Components
RSTools ActiveX Controls
(Cat. No. 9361-TOOLS)

All of the controls can be bound to the Visual Basic Data

control to link to most any database (Microsoft Access,
dBASEt, FoxPro, SQL, Server, or Oracle). RSTools and
Visual Basic help make the rapid creation of an inexpensive,
seamless link from the plant floor to the entire enterprise
possible.

Features
• Configure controls with graphical, point-and-click setup
• Connect to a variety of DDE sources through
AdvanceDDE, XL_TABLE or CF_TEXT protocols
• Display any error that occurs in the data stream
automatically with built-in error notification and handling
• Store configurations for easy re-use with RSTools
RSToolst are a collection of ActiveX Controls that let you Template Manager
use Rockwell Software AdvanceDDE format to represent • Use the WYSIWYG Preview Mode to preview results
data graphically for reliable, high-volume, high-speed (before applying them) while modifying properties or
communication. These tools help you develop applications applying templates
for discrete manufacturing, process control, SCADA, and
other industrial automation environments. • Use RSTools ActiveX Controls with any Dynamic Data
Exchange (DDE) server
All RSTools components can be accessed by Microsoft
Visual Basic, Microsoft Access, or any Microsoft compatible • Build a quick-pick of DDE links with the Symbol Manager
ActiveX control container. The tools consist of seven ActiveX • Display DDE link information at run-time using Link-Tips
controls (as described in the table below) and a flexible DDE
(Dynamic Data Exchange) RSJunctionBoxt communication • Use read/write math expressions capabilities to scale
module. The RSJunctionBox module lets all Rockwell incoming or outgoing data without writing code
Software controls communicate with DDE servers supporting
• Use RSTools ActiveX Controls as a container for pictures,
AdvanceDDE and Excel Table formats.
text, and other ActiveX controls
ActiveX Control Function • Extend Visual Basic events and provide additional custom
RSData The RSData OCX, a 32-bit Visual Basic, (successor to events including advanced communication, error
RSData VBX, a 16-bit Visual Basic, page 7-72) provides notification, and troubleshooting
numerical display of data and automatic database logging
of values on value change
RSVessel A powerful free-form dynamic fill shape control that allows System Requirements
percent fill based on the current value. You can create
images representing storage tanks, ovens, or vats and • Microsoft Visual Basic for Windows v4.0 or other
actively show their current status development environments capable of using ActiveX
RSWheel A panel thumbwheel emulator (mechanical, electronic, Controls
random number generator, etc.) to help you present your
data in a familiar classic format (binary, octal, decimal, or • RSJunctionBox module communicates with any DDE
hexadecimal) while still using the power and flexibility (over server capable of using one of the following formats:
100 custom and standard properties) that’s built into every
one of the Rockwell Software ActiveX controls
- Rockwell Software AdvanceDDE
- Microsoft Excel Table (XL_Table) or Text (CF_Text)
RSGauge A multi-functional highly-configurable graphical gauge (used
for speedometers, thermometers, pressures, etc.) lets you • IBM-compatible 486 processor or greater with 10M bytes
create dynamic round, semi-circular, or arc gauges all tied of free hard disk space and at least 8M bytes of RAM.
directly to live DDE data Rockwell Software recommends 16M bytes of RAM and a
RSButton Quickly create momentary, LEDs, check box, toggle, radio Super VGA (800  600) or greater display
or rocker buttons or switches to control and illustrate the
process. RSButton has graphic images for on/off states • Windows 95 or Windows NT v3.51 operating system
RSSlider Use RSSlider to provide custom data entry. RSSlider has
Min/Max value restriction, dual-scale display, an
assortment of scroll bars and knob styles, and horizontal Ordering Information
and vertical slider bars
Catalog Number Product
RSCompare A multi-state evaluation control that supports linear (new 9361-TOOLS 1 Includes RSData, RSGauge, RSVessel, RSCompare,
value is compared to the last value read) or absolute RSWheel, RSButton, RSSlider, RSJunctionBox
(compares current state to a check value) compare
methods. 9361-DATAOCX 1 RSData and RSJunctionBox module
9361-JBOX RSJunctionBox module
1 Includes Microsoft Visual Basic v4.0 standard edition (in the U.S./Canada).

7-71
Software Components
RSData Software
(Cat. No. 9361-VBX)

• Accepts data from different servers and uses the best

common format (AdvanceDDE, Excel Table, Text). Each
server negotiates its own communication
• Supports array data types to further improve data transfer
rates
• Offers enhanced reading and writing methods, such as
requesting and poking, when using control arrays
• Has extended data transmission error detection

System Requirements
• Microsoft Visual Basic for Windows, v3.0
• Support is provided with a reduced feature set for:
Microsoft Visual C++, Borland Delphi, Powersoft’s
PowerBuilder, previous versions of Visual Basic, and
RSData Software, a Visual Basic custom control software, other development environments providing VBX Level 1
lets you use the Rockwell Software AdvanceDDE format for compatibility
high-volume, high-speed communication. This control
software replaces the standard Visual Basic DDE-aware • Any DDE Server capable of using one of the following
client controls (Text Box and Label). formats:

RSData software can communicate through many formats - Rockwell Software AdvanceDDE
and chooses the best common format when establishing - Microsoft Excel Table (XL_Table)
links to server applications. RSData software first attempts to
link through the AdvanceDDE format, followed by the - Text (CF_Text)
Microsoft Excel Table format, and, finally, through the
standard text format. Without writing any code, you can link
RSData software to the Visual Basic data and log changes in Compatibility
any linked third-party database, such as Access, Paradox,
DBase, Microsoft SQL Server, Oracle and Foxpro • Visual Basic v4.0 (16-bit)
databases. • Applications using Microsoft Windows v3.x
• Windows 95 operating system
Features • Windows NT operating system
• Brings robust industrial communication into the quick and
easy Visual Basic development environment
Custom Properties
• Provides custom solutions for difficult tasks with the same
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
communication efficiency as sophisticated industrial AllowItemChangeEvent AlwaysDisplayData DataUpdate DataValue(item)
programs

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
DoPoke DoRequest LinkErrorDisplay LinkErrorNumber
• Links to databases, such as Access, Paradox, DBase,

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
LinkErrorString LinkItem LinkMode LinkServer
Microsoft SQL Server, Oracle, and FoxPro databases, LinkTip LinkTipBackColor LinkTipForeColor LinkTopic

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
and performs automatic logs to the database upon
change of the data value NumberOfDataItems PokeLength PokeStartIndex PokeResult

• Notifies you of important communication events, such as

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
PokeType RequestLength RequestMode RequestResult

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ItemChange, PokeCompleted, RequestCompleted, and RequestStartIndex UseInPoke UseInRequest
LinkError
• Provides high-volume, high-speed data transfer using
Custom Events

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
standard Windows DDE
• Reduces DDE transaction time geometrically with the

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ItemChanged PokeCompleted RequestCompleted
amount of data LinkError LinkNotify
• Has easy “search and replace” conversion from standard
DDE-aware controls
• Provides link-tip display of link information

7-72
 Software Components
RSWorkbench Development Environment
(Cat. No. 9462-BENCH)

• Control Forge is a WYSIWYG

(what-you-see-is-what-you-get) tool to simplify the
creation of property Templates for RSTools (ActiveXs)
• Database Apprentice creates a Microsoft ACCESS
database from scratch, creates a form from the database
fields and binds the controls to the database all in just four
clicks.
• Action Apprentice takes standard Actions and prompts the
user for action options. Once complete, this apprentice
generates code and puts it into the clipboard. Syntax is
automatic, necessary Form, Class, and Basic modules
are automatically added to the project as needed.
• Forms Library provides a visual preview of Forms from a
library of Forms and helps organize sets of Forms. Select
a Form and press the Apply button to automatically add
the Form to the open project.
The RSWorkbencht development environment attaches to
the Visual Basic v4.0 add-in menu to enhance both the • Draftsman has tools for aligning and sizing controls on a
Form as well as design rules for consistency to promote a
Visual Basic and the RSTools family of ActiveX controls.
common look and feel to Forms.
Once attached, the RSWorkbench product provides easy
access to re-usable Forms, Code, Images, Templates, • Code Library quickly accesses sample Code snippets that
can be copied to the clipboard. Code libraries promote
Apprentices for Database creation and Action creation.
“Outlets” consisting of PLC database symbols, addresses, code re-use and dramatically reduce code development
and descriptions can be dragged and dropped directly onto time.
the RSTools ActiveX Controls (page 7-71) to quickly link to • Project Manager lets you select multiple modules and
process data. using the right mouse menu duplicate or copy the
The RSWorkbench product is part of the RSWorkshop, which modules to a user-defined library.
consists of RSTools and RSWorkbench.

RSWorkshop System Requirements

RSWorkbench RSTools • Microsoft Visual Basic for Windows v4.0 or other
Electrician, Outlets, Pegboard, RSGauge, RSVessel, RSButton, development environments capable of using ActiveX
Drawers, Image Foundry, Control RSData, RSSlider, RSCompare, Controls
Forge, Database Apprentice, Action RSWheel
Apprentice, Forms Library, • RSJunctionBox module communicates with any DDE
Draftsman, Code Library, and Project server capable of using one of the following formats:
Manager
- Rockwell Software AdvanceDDE
- Microsoft Excel Table (XL_Table) or Text (CF_Text)
Features • IBM-compatible 486 processor or greater with 10M bytes
• Outlets provide a set of Tags for process linking and of free hard disk space and at least 8M bytes of RAM.
animation. This list of Tags is read directly from a user Rockwell Software recommends 16M bytes of RAM and a
database, Text file (CSV), or PLC database. Importing Super VGA (800  600) or greater display
and conversions are not necessary. • Windows 95 or Windows NT v3.51 operating system
• Electrician lets you assign a “Name” that is associated
with a Server, Topic, and Database. Once defined, the
electrician “Wires up an Outlet.”
• Pegboard, a virtual clipboard, provides over 50 pegs to
save clipboard data. One click captures the contents of
the clipboard. Another click restores the clipboard data.
You can save Pegboards to disk.
• Drawers organize project data. Libraries of Pegboards,
Databases, Images, Templates, Forms, Code, etc. are
accessible through these animated drawers.
• Image Foundry, a powerful object-oriented drawing
package, creates simple to complex drawings and saves
them in the standard windows MetaFile format (.WMF).
Autocad DXF files can be imported and modified to create
new drawings or symbol libraries.
7-73
Product Compliance Information
Operator Interface Products

UL/CSA and CE
The following products (in addition to the ones we’ve already identified in this section) have UL/CSA approval and CE
certification.

Class I Div 2 Hazardous

• 2705-EM21J1 • 2705-K11C1 • 2706-B13J8 • 2711E-K14C6 • 1747-CP3 • 2707-V40P1
• 2705-EM11J1 • 2705-K11C2 • 2706-B13J16 • 2711E-K14C7 • 2705-EP11S1 • 2707-V40P2
• 2705-EM2x • 2705-P11J1 • 2706-B13J31 • 2711E-T14C6 • 2705-EP21S1 • 2707-V40P2N
• 2705-EP2x • 2705-P11J1L • 2706-B23J8 • 2711E-T14C7 • 2705-EP21SE1 • 2711-B5A1
• 2705-EP21SE1 • 2705-P11J2 • 2706-B23J16 • 6151 Series2 • 2705-T3DN1A42A • 2711-B5A2
• 2705-EP11S1 • 2705-P11J2L • 2706-B23J31 • 6152 Series2 • 2705-T3DN1B42A • 2711-B5A5
• 2705-T3DN1A42A • 2705-P21C1 • 2706-B43J16 • 6153 Series2 • 2706 DL5 • 2711-K5A1
• 2705-T3DN1B42A • 2705-P21C2 • 2706-B43J31 • 6154 Series2 • 2706 DL10 • 2711-K5A2
• 2706-A41J • 2705-P21J1 • 2706 DL204 • 6155 Series • 2706 DL20 • 2711-K5A5
• 2706-A42J • 2705-P21J1L • 2706- DL404 • 6156 Series3 • 2706 DL40 • 2711-K9A1
• 2706-D11J2 • 2705-P21J2 • 2706 DL504 • 6157 Series2 • 2706 DL50 • 2711-K9A2
• 2706-D21J2 • 2705-P21J2L • 2706-E23J16 • 6158 Series2 • 2706-E23J16 • 2711-K9A5
• 2706 DL5 • 2705-P31J1 • 2706-E23J16B1 • 6159 Series • 2706-E23J16B1 • 2711-K14C6
• 2706 DL10 • 2705-P31J1L • 2706-E23J32 • 6180 Series3 • 2706-E23J32
• 2711-T9A1
• 2706-M1D • 2705-P31J2 • 2706-E23J32B1 • 6189-DPMOUSE • 2706-E23J32B1
• 2711-T9A2
• 2706-M1D1 • 2705-P31J2L • 2706-E43J32 • 6189-DPMOUSEP • 2706-E43J128B1
• 2711-T9A5
• 2706-M1F1 • 2705-T3ND • 2706-E43J32B1 • 2706-E43J32
• 2706-M1N1 • 2706-M1F • 2706-E43J64 • 2706-E43J32B1 • 2711-T14C6
• 2707-DNC • 2706-M1N • 2706-E43J64B1 • 2706-E43J64 • 2711E-K14C6
• 2707-L8P1 • 2711-B5A1 • 2706-E43J128 • 2706-E43J64B1 • 2711E-T14C6
• 2707-L8P1R • 2711-B5A2 • 2706-E43J128B1 • 2706-F11J • 6151 Series
• 2707-L8P2 • 2711-B5A5 • 2706-F11J • 2706-F11JC • 6152 Series
• 2707-L8P2R • 2711-B5A9 • 2706-F11JC • 2706-F21J • 6153 Series
• 2707-L40P1 • 2711-K5A1 • 2706-F21J • 2706-F21JC • 6154 Series
• 2707-L40P1R • 2711-K5A2 • 2706-F21JC • 2706-M1F1 • 6155 Series
• 2707-L40P2 • 2711-K5A5 • 2707-MVH232 • 2706-M1N1 • 6156 Series
• 2707-L40P2R • 2711-K9A1 • 2707-MVP232 • 2707-L8P1 • 6157 Series
• 2707-M232P3 • 2711-K9A2 • 6151 Series2 • 2707-L8P2 • 6158 Series
• 2707-M485P3 • 2711-K9A5 • 6152 Series2 • 2707-L40P1 • 6159 Series
• 2707-MVH232 • 2711-KA1 • 6153 Series2 • 2707-L40P2 • 6180 Series
• 2707-MVH232D • 2711-KC1 • 6154 Series2
• 2707-MVP232 • 2711-T9A1 • 6155 Series
• 2707-MVP232D • 2711-T9A2 • 6156 Series3
• 2707-V40P1 • 2711-T9A5 • 6157 Series
• 2707-V40P1R • 2711-TA1 • 6158 Series2
• 2707-V40P21 • 2711-TA4 • 6159 Series
• 2707-V40P2N1 • 2711-TC1
• 2707-V40P2N • 2711-TC4
• 2707-V40P2NR • 2711E-K12C6
• 2707-V40P2R • 2711E-K12C6L2
• 2711-K5A3 • 2711E-K14C6
• 2711-K5A9 • 2711E-K14C7
• 2711-K9A3 • 2711E-T12C4
• 2711-K9A9 • 2711E-T12C6
• 2711-K9C1 • 2711E-T14C6
• 2711-K9C3 • 2711E-T14C7
• 2711-K9C9
• 2711-T9A3
• 2711-T9A9
• 2711-T9C1
• 2711-T9C3
• 2711-T9C9
1 Rated Class I Division 1.
2 This product is UL Listed to Canadian safety standards, and it also bears the UL Listing Mark.
3 This product is UL Listed to Canadian safety standards.
4 This product is UL Listed for Type 12 and 13. Designed but not Listed for Type 4.

(Continued)

7-74
 Product Compliance Information
Operator Interface Products

Certification for Off-shore Applications

The following products have certification for off-shore applications.

• 1785-KE
• 2705-EM11J1
• 2705-EM21J1
• 2705-EP11S1
• 2705-EP21S1
• 2705-EP21SE1
• 2706-E23J16
• 2706-E23J16B1
• 2706-E23J32
• 2706-E23J32B1
• 2706-E43J32
• 2706-E43J32B1
• 2706-E43J64
• 2706-E43J64B1
• 2706-E43J128
• 2706-E43J128B1
• 2711-B5AÀÁ
• 2711-K5AÀÁ
• 2711-K9AÀÁ
• 2711-K9CÀÁ
• 2711-T9AÀÁ
• 2711-T9CÀÁ
• 6151 Series

À Catalog numbers vary depending on the communication options:

1 = Remote I/O communication and RS-232 printer port,
2 = DH-485 comm. and no printer port, 3 = DH-485 comm. and RS-232
printer port, 5 = RS-232 comm. with DH-485 protocol and no printer port,
8 = DH+ comm. and RS-232 printer port, 9 (RS-232 comm. with DH-485
protocol and RS-232 printer port), 10 (DeviceNet comm. and RS-232
printer port), 11 (ControlNet comm. and RS-232 printer port),
14 (Modbus comm. and RS-232 printer port.Á The suffix L1 is for
18-30V dc (no suffix is for 120/240V ac).

7-75
Notes

7-76