W. Jeff Roth 3150 Clarks Bridge Rd. Gainesville Ga.
30506 239-292-8735 Objective To obtain a position in PLC programming and design of process control systems. Experience September 2006-Presant W R Cool Energy Savings, LLC. Cornelia, Ga. Manager/ Owner o Started W R Cool Energy Savings, LLC. o Exclusive distributor of Compress Shield in Georgia. August2005-March2006 Edge Consulting Inc. Fort Myers, FL. Systems Engineer o Design and build a prototype water plant based on the Accelerated Electro Chemical Oxidation System AECOS technology. o Design, layout and build the electrical systems including the power supplies, control panels, program the Allen Bradley PLC. o Maintain caretaker possession of the AECOS prototype and oversee shipment to test sites. o Prepare the AECOS prototype for testing. o Perform optimization experiments, actual system testing and evaluation of test results. o Conduct mass-balance testing and other performance evaluations of the system. o Document test results using a qualified lab. o Evaluation of test results and operational performance of the system. June2001-August2005 Consolidated Power Services Naples, FL. Sr. Automation Systems Engineer o Design control panels and integrated SCADA control systems. o Programmed TI. and Siemens Step 7. programmable controllers. o Onsite initialization, debugging, and commissioning of Industrial control systems. 2000-June2001 Contract PLC Programming Gainesville, GA. Contract Programmer o Programmed TI. and Siemens Step 7. programmable controllers. o Onsite initialization, debugging, and commissioning of programmable logic controllers.
1998-2000 Azurix Philip Automation Acworth, GA. PLC Programmer o Programmed TI. and General Electric. programmable controllers. o Onsite initialization, debugging, and commissioning of programmable logic controllers. 1997-1998 Contract PLC Programming Gainesville, GA. Contract Programmer o Programmed TI. and Modicon programmable controllers for a localinstrumentation supplier. o Factory testing procedure development and implementation. 1988-1997 The Turbitrol Company Atlanta, GA. Project Designer o Design control panels for water and waste water plants. o Programmed TI, Square D, General Electric, and Modicon programmable controllers. o Onsite software initialization, debugging, and commissioning. o Modification and troubleshooting of water and waste water instrumentation and control equipment including PID loop controllers, temperature controls, multi stage variable frequency drive pumping, and chemical feed routines, pressure transducers,pH and mass flow meters. o Factory testing procedure development and implementation. 1985-1988 Milliken and Co. Barnwell, S.C. Instrumentation Engineer o Modification, maintenance and troubleshooting of plant instrumentation and DC and AC drive systems. o Supervision of instrumentation technicians and electricians. Education 1985 Old Dominion University Norfolk, VA. B.S., Electrical. Engineering Technology
Projects August2005-March2006 Edge Consulting Inc Fort Myers, FL. Systems Engineer o Design and build a prototype water plant based on the Accelerated Electro Chemical Oxidation System AECOS technology. Design, layout and build the electrical systems including the power supplies, control panels, program the Allen Bradley PLC. Perform optimization
experiments, actual system testing and evaluation of test results. June2001-August2005 Consolidated Power Services Naples, FL. Sr. Automation Systems Engineer o North Collier County Water Plant Hawthorne Well field expansion. Designed, build, and intergraded six well field control panels with PLC programming and SCADA. Panels contained PLC motor soft-start, level, pressure and flow control. o Collier County Capri Pump station. Design, build and instigate a pump control panel into existing SCADA. The control panel contained a PLC, motor contactors, pressure and flow controlled sequencing of the pumps, along with storage tank level control. o Design control panels and integrated SCADA control systems. o Programmed TI. and Siemens Step 7. programmable controllers. o Onsite initialization, debugging, and commissioning of Industrial control systems. o Switchgear and breaker testing. 2000-June2001 Contract PLC Programming Gainesville, GA. Contract Programmer o Conserve II water reclamation. Orlando Florida. Programmed PLC to control a two stage aeration process controlling ammonia in the first stage and nitrates in the second stage along with sequencing the blowers that fed the aeration basins. o North Collier County Water Plant. Engineer: Mecalf Eddy Modified Program and programmed an acid feed system for the reverse osmosis feed water system. 1998-2000 Azurix Philip Automation PLC Programmer Acworth, GA.
o North Collier County Water Plant. Engineer: Mecalf Eddy Programmed the PLC for a reverse osmosis desalination. o Sunrise, Florida. Engineer: Camp, Dresser & McKee Programmed and onsite startup of the ATAD digesters and chlorine feed system. 1988-1997 The Turbitrol Company Atlanta, GA. Project Designer o Kennbec Water Plant, Waterville Maine. Programmed the PLC to control the plant feed pumps, chemical feed pumps and distribution pumps. The chemical pumps are paced on water flow ratioed with dosing rate and analyzer feed back. The distribution pumps are controlled by the remote tank levels and feed pressure, integrated an autodialer to notify the operators of alarms after hours. Modified program for unmanned startup and shutdown night time operation based on remote tank levels.
o Trinity River Wastewater Plant. Dallas Ft. Worth, Texas. Engineer: CH2M Hill. 300MGD Plant. Programmed the PLC to control the Filter feed pumps, blower sequencing and guide vane controls, aeration basin air feed valve control based on DO levels and tank levels, in plant water feed system, chlorine feed system flow pacing of effluent dosing, feed pump and chemical feed control for the sludge filter press. o Hornsby Bend Sludge digester plant. Austin, Texas. Engineer: Camp, Dresser & McKee Programmed the PLC to control the digester feed pumps along with temperature and level control. Sludge feed pump and polymer feed pump control for the belt filter press room. o Gainesville Waste Water Treatment Plant. Gainesville Florida. Engineer: CH2M Hill Programmed the process control for the entire plant. Headworkes grit removal system and grit pump sequencing based on time of day and day of the week. RAS and WAS sludge flow control based on plant influent flow and operator entered solids rate. Controlled aeration mixers based on DO levels. o Wallnut Creek Waste Water Plant. Austin Texas. Engineer: Camp, Dresser & McKee 100 MGD Plant. Designed control panel circuitry and layout. Programmed filter backwash routines. Programmed aeration blower sequencing, startup, blow off valve and guide vane control.
