TUTORIAL 2
DATE:
INDUSTRIAL SAFETY ANALYSIS
00/00/2024
NAME: FIRST NAME MIDDLE NAME LAST NAME
ENROLMENT NO: 2 0 1 7 1 2 4
SUBJECT: INDUSTRIAL SAFETY (OPEN ELECTIVE)
SUBJECT CODE: 3172426
POWER ELECTRONICS ENGINEERING DEPARTMENT
VISHWAKARMA GOVERNMENT ENGINEING COLLEGE
VISAT_KOBA ROAD, CHANDKHEDA, AHMEDABAD, GUJARAT-382424
COs mapped with the tutorial:
Sr. Course Outcome Mapping
no. The student should be able to … Status
1 To understand the importance of safety and its management systems.
2 To accomplish the industrial safety analysis. Yes
3 To analyze fire and fire-fighting systems. Yes
4 To identify electrical safety, electric shocks, and their prevention.
5 To familiarize about the First aid methods.
POs mapped with the tutorial:
Sr. Program Outcome Mapping
no. Status
PO1 Engineering knowledge Yes
PO2 Problem analysis Yes
PO3 Design/development of solutions
PO4 Conduct investigations of complex problems Yes
PO5 Modern tool usage
PO6 The engineer and society Yes
PO7 Environment and sustainability Yes
PO8 Ethics
PO9 Individual and teamwork Yes
PO10 Communication
PO11 Project management and finance
PO12 Life-long learning Yes
PSOs mapped with the experiment:
Sr. Program Specific Outcome Mapping
no. Status
PSO1 Sound knowledge of active and passive electronic devices, various basic and
advanced laws governing power electronic circuits and systems.
PSO2 Analyze and design power electronic circuits and systems, suggest and Yes
develop power electronic systems/solutions for real life problems.
PSO3 Operate and make use of test and measurement equipment, latest simulation
tools and develop programs for power electronics engineering related
problems.
Syllabus Topic:
Industrial Safety Analysis:
Locating injury sources, identify causes of injury, injury investigation, safety analysis techniques -
FAULT TREE, THERP, FMEA; Risk tolerability, ten-point scale for workplace hazards.
Instructions:
1. Write your answers in your own words.
2. Write answers with reference to the documents you have studied. As far as possible, references
should be mentioned as per IEEE convention for reference. (see [Link] )
3. Do not copy directly from others/ online resources.
4. Wherever possible, give diagrams/schematics, charts, tables etc. in your answer.
5. As far as possible write just required answer. Avoid unnecessary long descriptions.
Questions:
Answer following questions considering the instructions given above.
Q 1. What are the major sources of injury at occupational place?
Q 2. Explain various sources of injury at the occupational place.
Q 3. State various methods of safety analysis.
Q 4. Discuss FTA (Fault Tree Analysis) with a case study.
Q 5. Discuss ‘Technique for Human Error Rate Prediction’ (THERP).
Q 6. Discuss FMEA (Failure Mode Effects Analysis) technique.
Q 7. What are the two factors associated with risk? Explain how these two factors impact on the
selection of accident controls.
Q 8. Is it important to conduct accident investigations? Why?
Q 9. What are the six key questions that should be asked during accident investigations?
Q 10. Explain the importance of these six questions to the health and safety professional.
Student’s Comments:
Teacher’s Remarks:
Name / Signature Marks given by
of the teacher: the teacher:
3172426 - INDUSTRIAL SAFETY (OPEN ELECTIVE)
Tutorial 2 - Industrial Safety Analysis 1
