Scribd
Upload
35 views6 pages

Obstacle Avoiding Robot Code Alone

Uploaded by

vasundharaniranjan7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
35 views6 pages

Obstacle Avoiding Robot Code Alone

Uploaded by

vasundharaniranjan7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

/*Obstacle avoiding robot

* [Link]

*/

#include <Servo.h>

Servo myservo;

byte servostart = 105;

int distanceleft = 0;

int distanceright = 0;

long t, cm;

//Motor one

#define ENA 9

#define IN1 2

#define IN2 3

//Motor two

#define IN3 4

#define IN4 5

#define ENB 10

//Sensor

#define Trig 6

#define Echo 7

#define Speed 255


void setup() {

[Link](11);

//Motor one

pinMode(ENA, OUTPUT);

pinMode(IN1, OUTPUT);

pinMode(IN2, OUTPUT);

//Motor two

pinMode(ENB, OUTPUT);

pinMode(IN3, OUTPUT);

pinMode(IN4, OUTPUT);

//Sensor

pinMode(Trig, OUTPUT);

pinMode(Echo, INPUT);

[Link](9600);

start();

void loop() {

getdistance();

[Link](cm);

int leftdistance = 0;

int rightdistance = 0;

if (cm <= 20) {

Stop();

delay(200);

leftdistance = leftsee();
rightdistance = rightsee();

if (leftdistance >= rightdistance) {

turnleft();

delay(200);

Stop();

} else {

turnright();

delay(200);

Stop();

} else {

forward();

[Link]("forward");

void forward() {

analogWrite(ENA, Speed);

analogWrite(ENB, Speed);

digitalWrite(IN1, LOW);

digitalWrite(IN2, HIGH);

digitalWrite(IN3, HIGH);

digitalWrite(IN4, LOW);

void turnright() {
analogWrite(ENA, Speed);

analogWrite(ENB, Speed);

digitalWrite(IN1, HIGH);

digitalWrite(IN2, LOW);

digitalWrite(IN3, HIGH);

digitalWrite(IN4, LOW);

void turnleft() {

analogWrite(ENA, Speed);

analogWrite(ENB, Speed);

digitalWrite(IN1, LOW);

digitalWrite(IN2, HIGH);

digitalWrite(IN3, LOW);

digitalWrite(IN4, HIGH);

void Stop() {

analogWrite(ENA, 0);

analogWrite(ENB, 0);

digitalWrite(IN1, LOW);

digitalWrite(IN2, LOW);

digitalWrite(IN3, LOW);

digitalWrite(IN4, LOW);

void start() {

delay(3000);

for (int a = 0; a < 4; a++) {


[Link](servostart);

delay(50);

[Link](40);

delay(50);

[Link](90);

delay(50);

[Link](servostart);

int leftsee() {

[Link](servostart);

delay(1000);

[Link](175);

delay(1000);

distanceleft = getdistance();

[Link](servostart);

return distanceleft;

int rightsee() {

[Link](servostart);

delay(1000);

[Link](5);

delay(1000);

distanceright = getdistance();

[Link](servostart);

return distanceright;
}

int getdistance() {

digitalWrite(Trig, LOW);

delayMicroseconds(4);

digitalWrite(Trig, HIGH);

delayMicroseconds(10);

digitalWrite(Trig, LOW);

t = pulseIn(Echo, HIGH);

cm = t / 29 / 2;

return cm;

You might also like