HolcimElevate.
com
Technical Information Sheet
UltraPly™ TPO QuickSeam™ 9½" Flashing
Item Description Item Number
White W56TPO30T9
Gray W56TPOG0T9
Tan W56TPOT0T9
Description
UltraPly TPO QuickSeam 9½" Flashing is an unsupported (non-reinforced) TPO membrane factory laminated to
white seam tape. UltraPly TPO QuickSeam 9½" Flashing is used to flash gravel stops and other flashing
applications as indicated in Elevate specifications and details.
Method of Application
1. Use Elevate Single Ply QuickPrime™ Primer or Single Ply LVOC Primer applied with a QuickScrubber ™ or
QuickScrubber Plus pad and handle to clean and prime membrane and metal mating surfaces to receive
UltraPly QuickSeam 9½ʺ Flashing.
2. Refer to current Elevate specifications for application instructions and details using Elevate UltraPly TPO
QuickSeam 9½ʺ Flashing: [Link]
NOTE: UltraPly TPO QuickSeam products must be heat-formed to conform to seam step-offs, metal laps, angle
changes, etc.
Storage
Store in original unopened containers indoors at temperatures between 60 °F (15.6 °C) and 80 °F (26.7 °C).
Do not store on roof in direct sunlight or at temperatures above 80 °F (26.7 °C).
When exposed to lower temperatures; restore to room temperature prior to use.
Shelf Life
Shelf life of 1.5 years can be expected when stored in original container at temperatures between
60 °F (15.6 °C) and 80 °F (26.7 °C). Shelf life will be shortened if exposed to elevated temperatures.
Precautions
Refer to Safety Data Sheets (SDS) for additional safety information.
September 29, 2022 Sales: (800) 428-4442 | Technical (800) 428-4511
TIS 1434 1
[Link]
LEED® Information
Post-Consumer Recycled Content: 0%
Post Industrial Recycled Content: 0%
Manufacturing Location: Michigan Center, MI
NOTE: LEED® is a registered trademark of the U.S. Green Building Council
Typical Properties
QuickSeam Tape TPO Unsupported Flashing
Properties Value Properties Value
Base Rubber Polymers Base TPO
Color White Color White, Gray, Tan
Percent Solids 100% Solvents None
Specific Gravity 1.08 ± 0.03 Percent Solids 100%
Cured State Cured Specific Gravity 0.96 ± 0.02
Thickness 0.030" (0.76 mm) ± .005" (0.13 mm) Thickness 0.030"(0.76 mm) ± 10%
Width 9¾" (248 mm) -0 /+ 1/16" (1.6 mm) Width 9½" (241 mm) +0 / - ⅛" (3.18 mm)
Length 100' (30.5 m) Length 100' (30.5 m)
Packaging
Properties Value
Roll 9.5" (235 mm) x 100' (30.48 m) roll
Carton 1 roll per carton
NOTES: QuickScrubber and/or QuickScrubber Plus Pads
and Handles are included in each carton. Quantities vary
depending on the QuickSeam product.
Please contact Holcim Technical Services at 800-428-4511 for further information.
This sheet is meant to highlight Elevate products and specifications and is subject to change without notice. Holcim takes
responsibility for furnishing quality materials that meet published Elevate product specifications or other technical
documents, subject to normal manufacturing tolerances. Neither Holcim nor its representatives practice architecture.
Holcim offers no opinion on and expressly refuses any responsibility for the soundness of any structure. Holcim accepts no
liability for structural failure or resultant damages. Consult a competent structural engineer prior to installation if the
structural soundness or structural ability to properly support a planned installation is in question. No Holcim representative
is authorized to vary this disclaimer.
September 29, 2022 Sales: (800) 428-4442 | Technical (800) 428-4511
TIS 1434 2
Firestone, the brand of premier roofing, wall, and lining systems you know and trust,
will be coming to you under a new name: Elevate. During our transition, products carrying
the brand name Firestone will change to Elevate on product labels and
packaging, Technical Information Sheets, and elsewhere. Only the brand name is
changing. Our products remain the same.
For further information on our brand transition to Elevate, scan the code below with your
smartphone, or visit our website: [Link]
