Industrial Gigabit Ethernet High Power PoE/PoE+ Injectors

CJG-100GEBT
power
over
ethernet

Introduction
Overview
The CJG-100GEBT (extended temperature) and CJG-100GBT (standard temperature) are Gigabit Ethernet Power over Ethernet injectors especially designed for industrial applications. It
supports regulated PoE output voltage (55VDC) to stabilize PoE device and built-in very high efficiency 12/24V power boost technology. These injectors comes in IP30 rated enclosure
protection and provide wide range input power of 12/24/48VDC (20~57VDC). The excellent design guarantees delivery PoE power distance up to 100 meters.

CJG-100GEBT can provide up to 60/72W through the non-standard use of all 4 pairs of category 5/5e or above cables. The original IEEE 802.3af PoE standard provides up to 15.4W of DC
power to each device while IEEE 802.3at (PoE+) can provide up to 30W of power. The PoE operation Mode A/B, power feeding via 2/4 pairs and power output can be configurable via DIP
switch which allows compatibility with any [Link].

Features
High Performance Network Switching Technology
Complies with IEEE standards Power reverse polarity protection and overload current protection
Provides 1 x 10/100/1000Base-T(X) with RJ-45 connector as data port Built-in high efficiency power booster to cater for the PoE/PoE+ requirement
Provides 1 x 10/100/1000Base-T(X) with RJ-45 connector as PoE injector port
Supports DIP switches to selecte PoE power output at 15.4W/30W/36W/60W/72W Robust Industrial Design
Supports DIP switches to selecte PoE operating mode A or B EN 61000-6-2 and EN 61000-6-4 certified to use in heavy industrial environment
Supports DIP switches to select PoE power feeding via 2 or 4 pairs cable of RJ-45 EN 50121-4 certified for Railway Applications (Track Side)
Robust industrial design case complies with IP30 housing standard
Reliable Power Design Supports operating temperature -10 to 60oC & extended temperature -40 to 75oC
Equipped with redundant power inputs DIN-Rail or optional wall mounting installation
Supports 12/24/48VDC power input

Specifications
Hardware Specifications
Interface IEEE802.3af 15.4W
Total Ports: 2 ports PoE Pin Assignment
RJ-45 Ports: 2 x 10/100/1000Base-T(X) auto-negotiation speed, Full/Half duplex, auto End-Span, Alternative A mode
MDI/MDI-X Positive (V+): RJ-45 pin 1, 2. / Negative (V-): RJ-45 pin 3, 6. / Data (1, 2, 3, 6, 4, 5, 7, 8 )
LEDs: System: Power 1 (Green), Power 2 (Green), Fault (Amber) Middle-Span, Alternative B mode
Alt A/PoE & Alt B/PoE: When PD is connected and getting power from injector (Green) Positive (V+): RJ-45 pin 4, 5 / Negative (V-): RJ-45 pin 7, 8 / Data (1, 2, 3, 6, 4, 5, 7, 8 )
DIP Switch:
DIP 1: OFF (Alt A): PoE operation mode alternative A Physical
ON (Alt B): PoE operation mode alternative B Dimensions: IP30 standard, 31.6mm (W) x 142.1mm (H) x 106mm (D)
DIP 2: OFF (STD): PoE 802.3af (15.4W), 802.3at (30W) Installation: DIN-Rail or optional wall mounting
ON (High): High Power PoE power output at 36W
DIP 3: OFF (2 Pair): PoE power feeding via 2 pairs of RJ-45
Environmental
Operating Temperature: Regular: -10 to 60oC, Extended: -40 to 75oC
ON (4 Pair): PoE power feeding via 4 pairs of RJ-45, ultra-high power output 60W/72W
Storage Temperature: -40 to 85°C
DIP 4: OFF (PD-A): This mode will be use in most of the PD
Operating Humidity: 5% to 95% RH (Non-condensing)
ON (PD-B): This mode will be use with particular PD devices at high-power 4 pair
mode installation (Eg. AXIS® Q60 series.)
Alarm Contact: 1A@24VDC
Technical
Standard:
Power Requirements IEEE 802.3 10Base-T Ethernet
Power Input: 12/24/48VDC (10 to 57VDC), redundant dual inputs IEEE 802.3u 100Base-TX/100Base-FX
Power Consumption: IEEE 802.3ab 1000Base-T
Operate in 30W mode (2 pair): IEEE 802.3x Flow Control
12VDC: 33.9W (Full load with PoE), 1.1W (Without PoE), Booster Efficiency 91.46 IEEE 802.3af/at Power over Ethernet (PoE/PoE+)
24VDC: 33W (Full load with PoE), 1.4W (Without PoE), Booster Efficiency 94.90% Protocol Technology: CSMA/CD
48VDC: 33.2W (Full load with PoE), 1.9W (Without PoE), Booster Efficiency 95.80% Switching Architecture: Store and Forward
Operate in 60W mode (4 pair):
12VDC: 67.1W (Full load with PoE), 1.1W (Without PoE), Booster Efficiency 90.90%
Regulatory Approvals
EMC: CE, EN 61000-6-2, EN 61000-6-4
24VDC: 65.2W (Full load with PoE), 1.4W (Without PoE), Booster Efficiency 94.10%
EMI: FCC Part 15 Subpart B Class A,CE EN55022 Class A
48VDC: 64.7W (Full load with PoE), 1.9W (Without PoE), Booster Efficiency 95.50%
EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
Power Protection: Reverse polarity protection, overload current protection
EN 61000-4-8
Railway Application (Track Side): EN 50121-4 (Certified)
PoE
Shock: IEC 60068-2-27
PoE Power Budget:
Vibration: IEC 60068-2-6
Maximum Ultra High Power 60W
Free Fall: IEC 60068-2-32
IEEE802.3at 30W
Environmental: WEEE, RoHS
IEEE802.3at High Power 36W
MTBF: 1,403,339 hours based on Mil-Hdbk-217F, GB
Warranty: 5 years

000
 Industrial Gigabit Ethernet High Power PoE/PoE+ Injectors
Dimensions (unit=mm)
106.00 31.60 30.00
40.64 15.20

30.00

184.00
142.10

50.53
Side View Front View Rear View DIN-Rail View Wall Mount View
(Optional Accessories)

Ordering Information
CJG-100GBT Industrial Gigabit Ethernet High Power PoE/PoE+ Injector, -10 to 60oC

CJG-100GEBT Industrial Gigabit Ethernet High Power PoE/PoE+ Injector, -40 to 75oC

000