INDIAN INSTITUTE OF
INFORMATION TECHNOLOGY, UNA
[HP]
An Institute of National Importance under MoE
Saloh, Una (HP) - 177209
Website: [Link]
Date:
PROJECT PLAN
Project phase-I
Course Code: ECL502
Student Name Sejal Jain, Sumit Sharma, Ritik Mishra Roll No. 21240, 21244, 21236
Batch 2021-2025 Semester V
Branch ECE Supervisor Dr. Naveen Cheggoju
1. Broad Area of the Project: Integration of IoT, ML and AI
2. Problem Definition:
a) Address the problem and motivation –
In the social areas if waste is not separated properly, it gets mixed up in landfills.
Waste segregation means keeping wet and dry wastes separately so that dry can be
recycled and wet waste can be composted. When mixed dry and wet waste breaks
down in landfills, it creates nasty greenhouse gases which is not good for the
environment
b) Summarize the domain-
Smart Garbage segregation and monitoring system is an autonomous system. The user
can place waste over the segregator table, the sensors over the table identifies and
segregate waste into dry and wet and the waste is pushed into respective bins.
The process continues until the bin is full and an alarm rings, SMS alert is sent to
notify that the dustbin is full.
3. Objectives:
• To reduce human efforts of manual segregation
• Alert user on time to avoid overflowing of bins and littering premises
• Timely disposal of the garbage
• Use of technology for the segregation increasing software skills
4. Skillset additionally required to solve/address the problem
• Hardware Components
IR sensor
Spark Fun Soil Moisture sensor (with screw terminals)
SG90 Micro-servo motor
Buzzer and Jumper wires
Bread board
Arduino UNO
Bolt IoT bolt Wi-Fi module
Software Components
Arduino IDE
Bolt IoT Android App
Bolt IoT Bolt Cloud
Twilio SMS messaging API
Jupyter notebook
5. Timeline to achieve the skillset: 19 weeks
6. Block schematic/algorithm/coding/testing metrics/experiments/result
graphs/technical papers:
Figure:1
Figure:2
7. Weekly milestones:
Review Week Objectives
Study the daily issues of garbage segregation and disposal
Review - 0 Week 1
Study the Explore the existing prototypes available for smart garbage
fundamentals of
Week 2
segregation and monitoring system
Hardware Review hardware components related to prototype
Components and Week 3
Software Skills Learn the basics of C++
Week 4
Week 5 Learn the basics of C++
Learn the basics of C++
Review - I Week 6
Explore how to assemble the hardware components
Week 7
Assembling and
Testing the Learning machine learning and app development
Week 8
Prototype and
learning software Learning machine learning and app development
Week 9
skills
Learning machine learning and app development
Week 10
Design a rough prototype model using simulation tool and
Week 11 app development
Upload the codes into Arduino module and Bolt cloud
Week 12
Testing the functionality of prototype
Week 13
Report preparation
Review -II Week 14
Demonstration of coding analysis
Week 15
Demonstration, Demonstration of final prototype
Week 16
Feedback and
Report Submission Identify the future enhancements based on public feedback
Week 17
Final assessment and report submission
End Sem Exam Week 18
Name and Signature of Students Name and Signature of Supervisor
