A L C T E L
Alcatel OmniPCX 4400
SUBSECTION 4
10/100 baseT CBRMA
connecting box
Ed.01
A L C T E L
Alcatel OmniPCX 4400
Subsection 4 - 10/100 baseT CBRMA connecting box
Subsection 4 - 10/100 baseT CBRMA connecting box
SUMMARY
10/100baseT CBRMA connecting box
Hardware description...................................................................................... 4. 3
1. Overview ................................................................................................ 4. 3
2. Description ............................................................................................. 4. 4
3. Installation and connection ................................................................... 4. 4
Ed.01 Ref.3BA19919ENAA 4.1
A L C T E L
Alcatel OmniPCX 4400
Subsection 4 - 10/100 baseT CBRMA connecting box
4.2 Ref.3BA19919ENAA Ed.01
A L C T E L
Alcatel OmniPCX 4400
Subsection 4 - 10/100 baseT CBRMA connecting box 10/100baseT
CBRMA connecting box
Hardware description
44A03780200A041AAEN
10/100baseT CBRMA connecting box
Hardware description
Edition: 01
1. Overview
The CBRMA 10/100baseT unit allows the OmniPCX 4400 system to be connected to external devices:
- local system console on a V24 port,
- application console on a V24 port,
- V24 modem for remote maintenance,
- Ethernet 10 or 100 baseT network.
The CBRMA unit is only used with M2 and M3 cabinets.
Figure 1 : CBRMA unit
86 mm
(3.4 '')
(2 U) 480 mm
(19 '')
73 mm
(2.8 '')
Reference: 3BA56174AC “CBRMA 10/100B-T CONNECTING BOX”.
Ed.01 Ref.3BA19919ENAA 4.3
A L C T E L
Alcatel OmniPCX 4400
10/100baseT CBRMA connecting box Subsection 4
- 10/100 baseT CBRMA connecting box
Hardware description
2. Description
Figure 2 : CBRMA connecting box
Ethernet 10/100 base T
for standby CPU
E0
Ethernet 10/100 base T E1
for main CPU
E0
E1
COM A for main CPU
A0 B0 C
CPU
COM B for main CPU
COM C (or wired
D
COM D (or wired) MDF
ALTCPU
TCPU
COM A for standby CPU
A1 B1
COM B for standby CPU
A1
B0
V24 port for local console
ExA
(RMA)
ExB
V24 port for general use RMA
ExC
V24 port for general use RMA RMAB
10Base-T/100Base-TX
Connecting Box
CBRMA
PRMA
Front view Side view board Rear view
(with cover removed)
The CBRMA units contains the PRMA board described in module PRMA board - Configuration.
3. Installation and connection
The CBRMA unit is installed:
4.4 Ref.3BA19919ENAA Ed.01
A L C T E L
Alcatel OmniPCX 4400
Subsection 4 - 10/100 baseT CBRMA connecting box 10/100baseT
CBRMA connecting box
Hardware description
- wall-mounted near the main ACT,
- in a 19 rack near the main ACT,
- in the M2 or M3 cabinet, if there is available space.
Figure 3 : Drilling template for wall-mounting
57 mm 200 mm (7.9'')
(2.2'')
463 mm (18.2'')
Installing cables:
To connect the cables, the CBRMA unit must be opened by removing the attachment screws as follows:
Figure 4 : Opening the CBRMA unit
Attachment
screws
The connection between the CBRMA unit and M2 or M3 cabinet depends on the cabinet’s configura-
tion.module M2/M3 cabinet - Connexion - Internal connections describes the different possibilities.
Each CBRMA unit cable must be attached as follows:
Ed.01 Ref.3BA19919ENAA 4.5
A L C T E L
Alcatel OmniPCX 4400
10/100baseT CBRMA connecting box Subsection 4
- 10/100 baseT CBRMA connecting box
Hardware description
Figure 5 : Example of cable attachement
CBRMA unit
Attachment clamp
4.6 Ref.3BA19919ENAA Ed.01
