A L C T E L
Alcatel OmniPCX 4400
SUBSECTION 11
TSC-IP V1 (4098RE)
Ed.01
A L C T E L
Alcatel OmniPCX 4400
Subsection 11 - TSC-IP V1 (4098RE)
Subsection 11 - TSC-IP V1 (4098RE)
SUMMARY
TSC-IP V1 (4098RE)
Hardware description.................................................................................... 11. 3
1. General ................................................................................................ 11. 3
2. Compliance .......................................................................................... 11. 3
3. Operation (Reserved to Expert users).................................................. 11. 4
Connection ..................................................................................................... 11. 7
1. Connection ........................................................................................... 11. 7
2. TSC-IP rear panel details..................................................................... 11. 7
Ed.01 Ref.3BA19919ENAA 11.1
A L C T E L
Alcatel OmniPCX 4400
Subsection 11 - TSC-IP V1 (4098RE)
11.2 Ref.3BA19919ENAA Ed.01
A L C T E L
Alcatel OmniPCX 4400
Subsection 11 - TSC-IP V1 (4098RE) TSC-IP V1 (4098RE)
Hardware description
44A03A50000A041AAEN
TSC-IP V1 (4098RE)
Hardware description
Edition: 01
1. General
The TSC-IP is an interface allowing a UA set to be connected to an OmniPCX 4400 via an IP Ethernet
10 Base T network.
The TSC-IP’s commercial name is “4098 RE”. It can be used with the following sets:
- A4035, the TSC-IP is then fitted under the set. The TSC-IP + 4035 set assembly’s commercial
name is 4037.
- A4020, the TSC-IP is then fitted under the set. The TSC-IP + 4020 set assembly’s commercial
name is 4022.
- A4010, the TSC-IP is then located next to the set.
- A4004, the TSC-IP is then located next to the set.
The TSC-IP has a 10 Base T output to connect an optional PC.
The TSC-IP is powered:
- either by a power pack (20 — 60 V, 270mA max),
- or by the IP network. In this case it is necessary to have a powering 10 Base T network.
2. Compliance
Alcatel certifies that the product: “ TSC-IP Digital telephone set IP adaptater” , commercial name “4098
RE / IP Enabler” complies with the following standards:
- EN 60950 (1992) + Amend. : 1&2 (1993) & 3 (1995) & 4(1997),
- EN 55022 (1994) + Amend. : 1(1995) & 2(1997),
- EN 55024 (1998),
- EN 61000–3–2 (1995) + Amend. : 1&2 (1998),
- EN 61000–3–2 (1995).
In addition, this product is compliant with the following directives:
- 73/23/EEEC modified,
- 89/336/EEEC modified.
Ed.01 Ref.3BA19919ENAA 11.3
A L C T E L
Alcatel OmniPCX 4400
TSC-IP V1 (4098RE) Subsection 11 - TSC-IP V1 (4098RE)
Hardware description
3. Operation (Reserved to Expert users)
The following diagram describes the different TSC-IP functional blocks.
SDRAM Eprom flash DSP
TSC-IP
3,3V Processor
Ethernet FPGA
DC/DC MAC
Converter 5V
Eth. medium
UA
Ethernet interface
10M Hub
Isol.
RJ45 RJ45 RJ11
LED Eth. PC
CPU LED LAN LAD
PC (Option) UA set
Mains
LAN
3.1. Processor
The processor handles the following functions:
- initialization phases,
- intermodule communication,
- transmission and reception messages over IP,
- MAC Ethernet level communication (dedicated hardware sub-assembly).
3.2. Physical Ethernet
This subassembly handles physical access to the Ethernet support.
11.4 Ref.3BA19919ENAA Ed.01
A L C T E L
Alcatel OmniPCX 4400
Subsection 11 - TSC-IP V1 (4098RE) TSC-IP V1 (4098RE)
Hardware description
3.3. Ethernet hub
This subassembly handles the TSC-IP hub function.
3.4. SDRAM and Flash Eprom
The Flash Eprom stores the TSC-IP boot and executable software program. The TSC-IP software pro-
gram is copied to the SDRAM during initialization.
If the TSC-IP software program is not updated, it will be downloaded from a PBX. As a security measure,
the Flash memory stores two software releases. If an error occurs when downloading a new software
program, the former release may be retrieved by pressing the “Resume after flash update error” button.
3.5. DSP
This voice processing processor handles compression / decompression and packet assembly.
3.6. FPGA
This programmable unit handles UA signaling.
3.7. UA interface
This Asic handles the UA line physical level.
3.8. DC/DC Converter
This module allows the external D.C. power supply to be converted into 3.3V and 5V as required for
the TSC-IP components.
3.9. Isolation
Isolation tranformers on each RJ45 and RJ11 input ensure electrical protection of the different compo-
nents.
3.10. RJ45 connectors
The RJ45 connectors are wired in such a way that only straight cables are required.
Ed.01 Ref.3BA19919ENAA 11.5
A L C T E L
Alcatel OmniPCX 4400
TSC-IP V1 (4098RE) Subsection 11 - TSC-IP V1 (4098RE)
Hardware description
11.6 Ref.3BA19919ENAA Ed.01
A L C T E L
Alcatel OmniPCX 4400
Subsection 11 - TSC-IP V1 (4098RE) TSC-IP V1 (4098RE)
Connection
44A03A50000A030AAEN
TSC-IP V1 (4098RE)
Connection
Edition: 01
1. Connection
The TSC-IP adapter is connected as follows :
Figure 1 : IP-Phone connection
IP-PHONE
UA3G set Power pack
TSC-IP interface
3
1
2
4 IP network
To PABX
The TSC-IP connects to :
1. the UA set ( RJ11/RJ11 cable),
2. the IP network (straight RJ45 cable),
3. the mains plug for the power supply,
4. a PC (optional), The PC is a workstation which uses the “hub” feature or the TSC-IP (link with a
straight RJ45 cable).
The UA 4035 or UA 4020 sets offer a housing to fit the adapter. For the 4004 and 4010 type sets, the
TSC-IP must be installed next to the set.
2. TSC-IP rear panel details
TSC-IP rear panel details:
Ed.01 Ref.3BA19919ENAA 11.7
A L C T E L
Alcatel OmniPCX 4400
TSC-IP V1 (4098RE) Subsection 11 - TSC-IP V1 (4098RE)
Connection
PC LAN
PC LAN CPU
3
1 2 4 5
1. RJ45 connector to connect the PC,
2. RJ45 connector to connect to the IP (LAN) network,
3. Indicators:
• PC : PC presence indicator light,
• LAN: IP network presence indicator light,
• CPU: CPU activity indicator light.
4. Resume button after flash update error (see the use of this button in module IP-Phones -
Maintenance ),
5. Power supply plug.
Figure 2 : Connector details
12345678 123456 1
2
RJ45 RJ11 Power supply
RJ45 Ethernet network connector:
Pin Signal Description
1 TXA+ TSC-IP transmission —> network
2 TXA- TSC-IP transmission —> network
3 RXA+ Network reception —> TSC-IP
4
5
6 RXA- Network reception —> TSC-IP
11.8 Ref.3BA19919ENAA Ed.01
A L C T E L
Alcatel OmniPCX 4400
Subsection 11 - TSC-IP V1 (4098RE) TSC-IP V1 (4098RE)
Connection
7 0V Power supply via the network (option)
8 —30 V to —60 V Power supply via the network (option)
RJ45 Ethernet PC connector:
Pin Signal Description
1 RXB+ Network reception —> TSC-IP
2 RXB- Network reception —> TSC-IP
3 TXB+ TSC-IP transmission —> network
4
5
6 TXB- TSC-IP transmission —> network
7
8
UA line RJ11 connector:
Pin Signal Description
1
2
3 LUAP UA line
4 LUAN UA line
5
6
Power supply connector:
Pin Signal Description
1 A42VL DC –
2 A42VP DC +
Ed.01 Ref.3BA19919ENAA 11.9
