Scribd
Upload
75 views1 page

Barsplicer - MTO - Certificate For Dayton Superior D310 Taper-Lock Standard Coupler

In response to your company's request to the Ministry of Transportation (MTO) to be listed in the DSM as a supplier of mechanical connectors for reinforcing steel bars, this is to advise you that we will be including your company’s name under the subject listing. Until DSM #9.65.58 dated 1 February 2012 is updated, you may use this letter as proof of qualification.

Uploaded by

gulilero_yo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
75 views1 page

Barsplicer - MTO - Certificate For Dayton Superior D310 Taper-Lock Standard Coupler

In response to your company's request to the Ministry of Transportation (MTO) to be listed in the DSM as a supplier of mechanical connectors for reinforcing steel bars, this is to advise you that we will be including your company’s name under the subject listing. Until DSM #9.65.58 dated 1 February 2012 is updated, you may use this letter as proof of qualification.

Uploaded by

gulilero_yo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
Ministry f Transportation Ministre des Transports, Bridge Ofica Bureau dela gestion des ponts Highway Standards Branch rection des normesrutres 301 St Paul Sveet 2" Flooe 30%, St Paul, 2 sage Nn ri Bu Catharines ON L2R 7R St Catharines ON UR TRA “ei: 905-704-2608 Tal 505-704-2406 Fave 908.704-2060 Tel. 905-708-2060 October 24, 2012 Lui Santacaterina Vice President, International BarSplice Products, Inc. 4900 Webster Street Dayton, Ohio 45414 Re: Designated Sources for Materials (DSM) #9.65.58 BPI Barsplicer XP Dear Mr. Santacaterina: In response to your company’s request to the Ministry of Transportation (MTO) to be listed in the DSM as a supplier of mechanical connectors for reinforcing steel bars, this is to advise you that we will be including your company’s name under the subject listing. Until OSM #9.65.58 dated 1 February 2012 is updated, you may use this letter as proof of qualification. To remain qualified for the DSM, companies are expected to consistently provide a suitable product and their production facilities are subject to periodic monitoring. For out-of-province materials, the ministry may request independent inspection of the company's production facilities from time to time to ensure they continue to mest the requirements for listing. In general, no more than a biennial inspection would be required. In addition, the ministry reserves the right to remove a company from the DSM for the causes listed in the Structural DSM Criteria for Approval or for failure to comply with contract requirements such as job control tests. If you have any questions, please contact the undersigned. Sincerely, - R. Mihaljevic, P. Eng. [Link] Assurance Engineer cD. Bagnariol N. Theodor J. Torontali M. Rankie

You might also like