USN : 1 D A Sub Code:
21MET301
Dr. Ambedkar Institute of Technology
(An Autonomous Institution, Aided by Government of Karnataka
Affiliated to Visvesvaraya Technological University, Belgaum & Approved by AICTE, New Delhi)
BDA Outer Ring Road, Near Jnana Bharathi Campus, Mallathally, Bengaluru-560056, Karnataka
Third Semester B.E. Degree (Autonomous) Continuous Internal Evaluation (CIE – I)
ODD Semester 2024
Date : 20/03/2024 Sub. Title : MECHANICS OF MATERIALS Timings : 6:00-7:00PM
Day : Wednesday Sub. Code : 21MET301 Time duration : 60 mins
Branch: Mechanical Working Professional Max marks : 25
Semester / Sec : III CIE – I Staff in-charge: JH
Course RBTL
Q. No. Note : Answer ALL the questions Marks
Outcome
1 a) A circular tapering bar of length L is subjected to an axial force 5 CO1 L2
P. Let the big end and small end diameters be d1 and d2 find the
Deformation
b) A round bar with stepped portion is subjected to the forces shown 5 CO1 L2
in fig 1.b. Determine the magnitude of force P such that net
deformation in the bar does not exceed 1mm. young’s modulus
for steel is 200GPa and that for aluminium is 70 GPa.Big end
diameter and small end diameter of the tapering bar are 40mm
and 12.5mm respectively.
2. a) Draw shear force and bending moment for Cantilever beam 5 CO1 L2
b) Derive relationship between shear force, load intensity and 5 CO2 L1
bending Moment
OR
c) Derive the relation between E, G and K 5 CO1 L1
Prepared by Approved by
Prof. Jayanth Hombalaiah
HOD
Sub Code: 21MET301
Multiple Choice Questions (Carries 0.5 Marks each)
Note : Answer ALL the questions
1. The deformation per unit length is called
A Tensile stress B C D Strain
Compressive stress Shear stress
2. The maximum stress produced in a bar of tapering section is at
Smaller end Larger end Middle Anywhere
A B C D
3. bThe energy stored in a body when strained within elastic limit is known as
Strain energy Impact energy
A B Resilience C Proof resilience D
4. In compression test, the fracture in cast iron specimen would occur along
At right angles to
A B The axis of load C the axis of the D Would not occur
An oblique plane
specimen
5. Wherever the Bending moment is maximum the shear force will be _____________
maximum
A zero B C minimum D Any
6. The variation of the shearing force due to uniformly distributed load will follow ______ curve
A Linear B Parabolic C Cubic D None
7. When a rectangular bar is uniaxially loaded, the volumetric strain (ev) is given as ________
A σx / E(1- μ) B σx / E(1+ μ) C σx / E(1- 2μ) D σx / E(1+2μ)
8. The variation of the bending moment due to uniformly distributed load will follow ______ curve
A Linear B Parabolic C Cubic D None
9. The stress at which the extension of the material takes place more quickly as compared to the
increase in load, is called
A Elastic limit B Yield point C Ultimate point D Breaking point
10. Bearing stress is equal to
A Pt/d B P/td C Pd/t D td/P
