Lighting
GreenUp Wellglass
BY200P LED40 L-B/CW PSU
LED Module, system flux 3800 lm - Cool white - Power supply
unit
GreenUp LED Welglass luminaire is designed to replace traditional WelGlass up to
70W with only 35% of the load for similar illumination. It is a perfect LED solution for
outdoor application and industry of harsh condition like power plant, metal, and non
hazardous area in chemical and petrochemical industry. Compared to conventional
HID WelGlass, it improves reliability, comfort, while reducing energy and
maintenance cost dramatically. GreenUp Welglass comes with 2 different mounting,
pipe and bracket, and comes with 2 beam, lambertian and batwing.
Product data
General Information CE mark -
Lamp family code LED38S [ LED Module, system flux 3800 lm] ENEC mark -
Light source color Cool white UL mark -
Light source replaceable No Constant light output Yes
Number of gear units 1 unit Spare parts available No
Gear - Number of products on MCB of 16 A type B 24
Driver/power unit/transformer Power supply unit Light source engine type LED
Driver included Yes
Optic type Wide beam Operating and Electrical
Optical cover/lens type Polycarbonate bowl/cover frosted Input Voltage 220 to 240 V
Luminaire light beam spread 120° Input Frequency 50 to 60 Hz
Control interface - Power Factor (Min) 0.95
Connection - Power Factor (Nom) 0.95
Protection class IEC Safety class I
Glow-wire test Temperature 650 °C, duration 30 s
Flammability mark -
Datasheet, 2019, September 13 data subject to change
GreenUp Wellglass
Controls and Dimming Initial chromaticity -
Dimmable No Initial input power 38 W
Power consumption tolerance +/-10%
Mechanical and Housing
Housing Material Aluminum die cast Over Time Performance (IEC Compliant)
Optic material Polycarbonate Median useful life L70B50 50000 h
Optical cover/lens material Polycarbonate
Optical cover/lens finish Opal Application Conditions
Overall height 255 mm Ambient temperature range -30 to +40 °C
Overall diameter 215 mm Maximum dim level Not applicable
Color Dark gray
Product Data
Approval and Application Full product code 911401563721
Ingress protection code IP65 [ Dust penetration-protected, jet- Order product name BY200P LED40 L-B/CW PSU
proof] Order code 911401563721
Mech. impact protection code IK08 [ 5 J vandal-protected] Numerator - Quantity Per Pack 1
Numerator - Packs per outer box 1
Initial Performance (IEC Compliant) Material Nr. (12NC) 911401563721
Initial luminous flux (system flux) 3600 lm Net Weight (Piece) 2.699 kg
Luminous flux tolerance +/-7.5%
Initial LED luminaire efficacy 90 lm/W
Init. Corr. Color Temperature 6500 K
Init. Color Rendering Index >80
Dimensional drawing
255
218 O 215
GreenUp Wellglass BY200P
© 2019 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or
completeness of the information included herein and shall not be liable for any action in reliance thereon. The
information presented in this document is not intended as any commercial offer and does not form part of any
quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered www.lighting.philips.com
trademarks of Koninklijke Philips N.V. 2019, September 13 - data subject to change
