VX200 User’s Manual
Statement
Welcome to use the product from Xi’an NovaStar Tech Co., Ltd. (hereinafter referred
to as “NovaStar”). It is our great pleasure to offer this manual to help you
understand and use the product. We have striven for precision and reliability during
the compilation of this manual. The contents of this manual are subject to change
without notice. If you have any problem in use or you have any suggestion, please
feel free to contact us according to the contact information provided in this manual.
We will do our utmost to satisfy your needs. We would like to express our sincere
thanks to your suggestions and make assessment for adoption as soon as possible.
Copyright
All the intellectual property rights involved in this document belong to NovaStar.
Unauthorized duplication is a violation of applicable laws.
Trademark
is the registered trademark of NovaStar.
Safety Statement
To avoid potential hazards, please use this unit according to regulations. In the
event of breakdowns, non-professionals are not allowed to disassemble it for
maintenance without permission. Please contact the after-sales department of
NovaStar. Power outlet should be installed near the unit and easy to reach.
High voltage danger: The operating voltage range of this product is
100-240V AC.
Grounding: This product is grounded through grounding cord of power
supply. Please keep the grounding conductor well grounded.
Electromagnetic interference: Keep this product far away from magnets,
motors and transformers.
Moisture proof: Keep this product in a dry and clean environment. In
case of liquid immersion, please pull the power plug out immediately.
Keep the product away from flammable and explosive hazardous
substance.
Prevent liquids or metal fragments from dropping into the product in
order to avoid safety accidents.
VX200 User’s Manual
TABLE OF CONTENTS
Chapter 1 Overview............................................................................................... 1
Chapter 2 Function Brief ...................................................................................... 2
Input/Output Interface Diagram..................................................................... 2
Front Panel Control Display Diagram............................................................ 2
Electrical Parameters ........................................................................................... 4
Chapter 3 Signal Connection ............................................................................... 5
Signal Connection ................................................................................................ 5
Multiple Units Connection ................................................................................ 5
Chapter 4 Menu Operations ................................................................................ 6
Main Interface ....................................................................................................... 6
Main Menu ............................................................................................................. 7
Output Settings..................................................................................................... 8
PIP .............................................................................................................................. 8
Image Crop ............................................................................................................. 9
Picture Settings ...................................................................................................10
Image Switching .................................................................................................10
Misc Settings........................................................................................................11
Uplay settings ......................................................................................................12
Language/菜单语言 ............................................................................................12
Chapter 5 Quick Operation Guide ..................................................................... 13
Chapter 6 FAQ .................................................................................................................. 16
VX200 User’s Manual
Chapter 1 Overview
VX200 is a video processor developed for the display system of large-size LED
displays. With the leading-edge chips of the industry used and 12-bit digital
processing inside, it will bring us clearer images and richer colors. VX200 has
adopted technologies such as Faroudja® DCDI de-interlacing video processing,
Real Color® real color image processing, Faroudja®TureLife™ video image
enhancement, etc. to perfect the display of video image.
The maximum output resolution of a single unit is up to 2048×1152 and it allows to
customize output resolution. VX200 has multiple special switching effects like
signal cut and fade. The size and position of PIP (Picture in Picture) can be set as you
wish and AIAO (Any In Any Out) is supported.
In addition, VX200 supports USB drive play with the feature of automatic detection
and plug-and-play, which has made it much easier and more flexible to use.
-1-
VX200 User’s Manual
Chapter 2 Function Brief
Input/Output Interface Diagram
INPUT
AV1, AV2 Video input interface, BNC interface, coaxial signal line
VGA VGA input interface
DVI DVI input interface
HDMI HDMI input interface
USB USB drive interface
OUTPUT
DVI1, DVI2 DVI output
VGA VGA output
AUDIO Audio output of USB media files
CONTROL
UART IN, OUT Synchronous call communication interface of the processor
CTRL USB upper computer control interface
SENDING CARD
Two receiving cards can be installed with 5V power cords
Sending Card
inside
POWER
Power AC 100~240V input, power switch
Front Panel Control Display Diagram
Rotate
Press the Call out main menu or Choose a menu item or adjust
the
knob confirm parameters
knob
Press and
Directly return to main
hold the ESC Return button
interface
knob
Shortcut for switching between
AV1 AV1 signal switching PART
Part and Full Display;
-2-
VX200 User’s Manual
Used as Play/Pause button during
USB drive play
Shortcut to open or close PIP;
AV2 AV2 signal switching PIP Used as Fast backward button
during USB drive play
Shortcut for screen freeze;
VGA VGA signal switching FROZ Used as Fast forward button during
USB drive play
VGA auto adjusting;
HDMI HDMI signal switching AUTO Used as Stop button during USB
drive play
To load or save models;
DVI DVI signal switching MODE Used as Previous button during
USB drive play
Press the button once
to switch USB source Shortcut for picture switching;
EXT. and press it again to TAKE Used as Next button during USB
enter the operation of drive play
USB drive play
Shortcut operations:
MENU: Press and hold the button to call out brightness adjusting menu when in
main interface; Press and hold the button to directly return to main
interface when in menu mode.
MODE: Press “MODE” to enter “Load Model” interface and then press “AUTO”
to save model.
-3-
VX200 User’s Manual
Electrical Parameters
Input/Output interface and performance index of the processor:
Inputs
Port Qty Resolution Specifications
AV 2 PAL/NTSC
USB 1 Standard USB2.0 interface
VGA 1 VESA standard, Max. supported input 1080p@60Hz
DVI 1 VESA standard (supports 1080i input), supports HDCP
EIA/CEA-861 standard, in accordance with HDMI-1.3
HDMI 1
standard, supports HDCP
Outputs
Port Qty Resolution Specifications
640×480@60Hz, 1024×768@60 Hz, 1280×720@60Hz,
1280×768@60Hz, 1280×800@60Hz, 1280×1024@60Hz,
1366×768@60Hz, 1440×900@60Hz, 1536×1536@60Hz,
1600×1200@60Hz, 1680×1050@60Hz, 1920×1080@60Hz,
DVI 2
1920×1200@60Hz, 2048×640@60Hz, 2048×1152@60Hz ,
2560×816@60Hz, 1920×1080@50Hz,
1024×768@75/85/100/120 Hz, 1280×1024@75/85/100Hz
Custom resolution
Control
Port Qty Notes
USB 1 Control interface of upper computer
Overall Specifications
Input power AC 100-240V, 50/60Hz
Overall power consumption 25W
Operating temperature 0~45℃
Dimensions 482.6×275×44.5（mm）
Weight 2.55 Kg
-4-
VX200 User’s Manual
Chapter 3 Signal Connection
Signal Connection
Two sending cards can be installed in the unit and a single unit can drive a LED
display with 2048×1152 pixels.
The unit supports 8-channel analog and digital signal inputs at most.
Tip: Please turn off the power during signal connection.
Multiple Units Connection
Note: This connection mode is applied to synchronous loading of processor models,
namely, save the models in advance and then press one button for synchronous
load when multiple units are connected.
Load model: Press “MODE” on the front panel and the Load Model interface
appears. Press NUM key to load model.
Save model: Enter “Load Model” interface via shortcut and press “AUTO” to switch to
“Save Model” interface. Then press NUM key to save. It only can save for each unit
separately.
-5-
VX200 User’s Manual
Chapter 4 Menu Operations
Main Interface
Switch on the processor and the main interface on operation screen is shown as
follows:
1st line: Channel1, signal source, format of input signal;
2nd line: Channel2, signal source, format of input signal;
3rd line: Output, resolution and refresh rate of output signal;
4th line: Status line, the meaning of each icon is described as follows;
: PIP closed;
: PIP opened, Channel1 picture is moved to the top layer;
: PIP opened, Channel2 picture is moved to the top layer;
: Part function is enabled and size of output image is the same as window size；
: Full screen function is enabled and the size of output image is the same as
the input size;
: Channel1 Image Crop is closed and the output is complete image;
: Channel1 Image Crop is opened and the output is cropped image;
: Channel2 Image Crop is closed and the output is complete image;
: Channel2 Image Crop is opened and the output is cropped image;
: Freeze is opened and current output image is frozen;
: Current USB drive is set to single round play;
: Current USB drive is set to list round play;
: USB drive hasn't been plugged;
： USB drive has been plugged;
： USB drive has been plugged, but the format of USB drive is not supported.
-6-
VX200 User’s Manual
Main Menu
Press the knob when in the main interface to enter menu operation interface, then
press the knob to enter submenus. Press “ESC” button to back to previous level
and press and hold the knob to directly back to the main interface.
Output Resolution, Horizontal Width, Vertical Height, Horizontal Start,
Settings Vertical Start, Display (Part/Full), Custom Resolution
PIP(Open/Close),CH2 signal(signal
source selecting, Layer, Diaphaneity, Text Overlay
Horizontal Width, Vertical Height, (Open/Close),
PIP
Horizontal Start, Vertical Start, Text Preset, Blend Level
Overlay
Image Crop(Open/Close),Horizontal
Width, Vertical Height, Horizontal Start,
Video Crop CH1 Video Crop
Vertical Start
CH2 Video Crop
Image Crop (Open/Close), Horizontal
Width, Vertical Height, Horizontal Start,
Vertical Start
Picture Image Mode, Brightness, Contrast, Color, Sharpness, Hue,
Settings Scene Mode, Color Temp, Gama, 3DNR, Configure Reset
Image Effect (Cut/Fade)
Switching Switch Image
Freeze, Instant, Save Model, Match Method, Horizontal
Misc Load Model, Lock Input Resolution,
Settings Resolution, Vertical Resolution, Apply,
Factory Reset Restore Default
Uplay Voice, Volume, TRK Select,
Settings Round Mode (List/Single)
Language/ English/英文
菜单语言 中文/Chinese
-7-
VX200 User’s Manual
Output Settings
Set output resolution and output window size.
Resolution 1280*1024@60Hz
Horizontal Width 1920
Vertical Height 1080
Horizontal Start 0
Vertical Start 0
Display Full/Part
Custom Resolution >>
Note: the steps of output settings for LED display:
1) Choose a suitable resolution (the number of horizontal pixels and vertical
pixels of the selected resolution are greater than that of the LED display) → Set
“H-Width” and “V-Height” according to the size of the LED display;
2) Horizontal start and vertical start are the same as the horizontal and vertical
start of sending card. Generally, they are set to 0;
3) Full/Part: It is part display by default after the width and height are set, that is,
zoomed-out picture will be shown on LED display; When full display is
selected, the output image, the size of which is the resolution selected, may be
beyond the screen;
4) Custom resolution: Max. output of a single unit is 2048×1152. It allows to set
resolution manually as required according to the corresponding sending card.
PIP
Channel2 picture, it allows to display in any position and any size.
PIP Open/Close
CH2 signal source AV1/AV2//VGA/DVI/HDMI/USB
Layer Top/Bottom Layer
Diaphaneity 0~15
Horizontal Width 1920
Vertical Height 1080
Horizontal Start 0
Vertical Start 0
Text Overlay >>
-8-
VX200 User’s Manual
The channel, position, size, diaphaneity of PIP can be set in this option.
Text Overlay: Text can be displayed in PIP.
Text Overlay Open/Close
Preset White On Black
Blend Level 0~15
Preset: White On Black, Black On White, Green On Black, Green On White, Red On
Black, Red On White. When applying Text Overlay, choose CH2 signal source and
preset the corresponding characters and background.
Note: PIP is restricted to signal channels, as shown in the table below:
“√”denotes PIP can be opened; “×”denotes PIP cannot be opened.
Main Channel Source
HDMI DVI VGA AV1 AV2 USB
PIP HDMI × √ √ √ √
Source DVI × √ √ √ √
VGA √ √ √ √ √
AV1 √ √ √ × √
AV2 √ √ √ × √
USB √ √ √ √ √
Image Crop
Image crop can be applied to CH1 and CH2;
Open “Image Crop” and set parameters. Then the cropped image will be shown
on LED display.
Image Crop Open/Close
Horizontal Width 1920
Vertical Height 1080
Horizontal Start 0
Vertical Start 0
Note: Image crop is only for the input Channel and it will not affect the output of
other channels after the signal source is switched.
Image crop parameter settings:
-9-
VX200 User’s Manual
The start point of the video window in the figure is(800,100), horizontal width is 500
and vertical height is 400. Only the image in this window will be outputted as shown
in the figure above.
Picture Settings
Image Mode Custom/Normal/Soft/Dynamic
Brightness 50
Contrast 50
Color 50
Sharpness 50
Hue 50
Scene Mode Close/Gorgeous/Theatre/Game/Sports
Color Temp Normal/Cool Color/Warm Color/Custom
Gamma Close/-1.2~2.0
3DNR Off/Low/Self-adaption/Medium/High
Image Mode: Custom/Normal/Soft/Dynamic;
Brightness, contrast and color can be adjusted only in custom mode and
parameters will be saved automatically after adjustment.
Brightness: Press and hold the knob when in main interface to call out brightness
menu.
Image Switching
Effect Cut/Fade
Switch Image >>
Note: Image switching is between CH1 and CH2. It is required to manually set the
position and size of PIP before switching.
-10-
VX200 User’s Manual
Image switching interface
Image switching interface can be opened through the shortcut “TAKE” on the
front panel.
Tip: The signal sources that can be switched from one to another are the same
as the sources of PIP.
Misc Settings
Freeze Close/Open
Instant Close/Open
Save Model >>
Load Model >>
Lock Input
>>
Resolution
Factory Reset Confirm
Freeze: The output of the processor is frozen at current displayed picture.
Instant: If it is closed, a blank screen will appears on the LED display during input
source switching. If it is opened, the switching effect will kick in.
Lock Input Resolution: The resolution of front-end signal source can be set
through DVI input channel. Point-to-point display can be realized. It will get the
best display effect and save bandwidth.
Match Method Manual/Auto
Horizontal
1920
Resolution
Vertical Resolution 1080
Apply >>
Restore Default >>
Auto: System will read the optimum resolution of rear-end device.
Apply: Put the manually set parameters into effect in order to change the
resolution of signal source.
-11-
VX200 User’s Manual
Restore Default: Restore to default parameters.
Factory Reset: All the parameters is reset and the settings saved by users is cleared
after factory reset.
Uplay settings
Voice Enable/Disable
Volume 0~100
TRK Select Track type
Round Mode Single round/List round
The processor will automatically detect and play the files that can be played in the
USB drive when USB drive is selected as input. Users can switch through Previous
and Next buttons or view the files in the USB drive and select files to be played.
Please refer to USB drive Content Browsing and Selecting in Quick Operation
Guide for detailed operations.
When in USB Play operation interface, you can press shortcut “MENU” to access
Uplay settings interface.
Language/菜单语言
The unit supports both Chinese and English menu.
Language/菜单语言
English /英文
中文/Chinese
-12-
VX200 User’s Manual
Chapter 5 Quick Operation Guide
Power Connection
Please make sure the power supply is well grounded
before installation;
Please use intact power lines to connect devices;
Please make sure the power switch is off;
Operating voltage of the unit: AC 100~240V.
Sending Card Installation
Two sending cars can be installed in the
unit at the same time;
Please use the copper bolts and screws
attached with the unit.
5V power cords of sending card are inside.
PIP
PIP can be opened directly through the “PIP” button on the front panel.
PIP is opened and picture of CH1 is on the top layer.
PIP is opened and picture of CH2 is on the top layer.
The size and position of main channel and PIP can be set by the options in the
menu.
Part/Full Display “PART”
Part/Full is closed and the size of output image is same as the size of
window.
Part/Full is opened and the size of output image is the set
resolution.
The shortcut is able to quickly switch between zoomed-out window and full-screen
display.
USB drive Content Browsing and Selecting
Press “EXT” button to set USB drive as input source. Press the button again to
enter USB drive play operation and the indicator lights of six function buttons are
on. These six function buttons now are used as six operation buttons of playback.
Press Stop button (AUTO) to browse the content of USB drive directly on LED
-13-
VX200 User’s Manual
display. Turn the knob to select media.
As shown in the figure below:
Image Freeze “FROZ”
Current image is frozen when this option is opened.
This function can freeze current image. Operations on signal source cannot
influence the output image.
Auto Adjusting “AUTO”
Auto adjusting is used for auto phase adjustment.
Model Function “MODE”
In some occasions, it is needed to set multiple scene modes. Different scene modes
can be saved as different models which can be loaded when needed.
Press “MODE” button to load models.
In this interface, press “AUTO” to save the model.
Current scene can be saved as corresponding model.
When multiple units operate together, they can be cascaded by network cables as
-14-
VX200 User’s Manual
shown in the figure below. Same scene will be saved as uniform model by each
processor separately. Load the model on any one of the processors and the model
will be loaded synchronously on other processors.
Quick image switching TAKE
Press TAKE button on the front panel to directly enter signal source switching
interface. Now the highlighted signal will be displayed on the top layer and the
signal on the bottom layer can be changed through signal source shortcut. After it
is changed, press TAKE button again to change the bottom-layer signal to the top
layer. In this way, one signal source can be quickly switched to and displayed on the
top layer.
Signal switching effects can be configured through menus.
Press ESC to return to main interface.
-15-
VX200 User’s Manual
Chapter 6 FAQ
Problems Solutions
Nothing is displayed Check whether the power is connected correctly and
on LED screen. switched on.
Check whether the input channel has signal input and it
is displayed correctly;
Check whether PIP is opened and whether CH2 has signal
input and it is displayed correctly;
Check whether the output settings are normal and the
DVI has no image
image window is moved out of the LED display window;
output.
Check whether DVI output is connected correctly;
If a monitor is connected, please make sure whether it
supports output resolution of the processor;
Reset the processor and try the operations again to
check whether there is image output;
VGA input phase
Press AUTO to perform VGA auto phase adjusting;
offset
Check output settings to make sure parameter settings
are reasonable;
Check the status line on LCD of the processor to make
DVI output image is
sure whether other enabled functions have influence on
abnormal
output parameters;
Check DVI interface to make sure whether DVI is
connected correctly;
Check CH2 to make sure whether there is signal input
PIP is displayed
and it is displayed normally;
abnormally
Check whether the parameter settings of PIP is normal;
Check whether CH1 and CH2 have signal input and they
are displayed normally;
Fade is abnormal
Check whether output and PIP parameters are set
correctly;
-16-
VX200 User’s Manual
Check whether the processor is correctly connected;
Check whether parameter settings of the processor are
Display is abnormal
correct;
Check whether input source is normal.
Check whether the USB drive is well plugged;
USB drive cannot be Check whether the file system of the USB drive is
normally identified supported;
Check whether poor-quality USB extension cable is used;
Check whether the current media file has tracks;
There is no sound
Check whether “Voice” in “U play settings” is
during USB play
enabled and volume is set to a proper value.
Please troubleshoot the devices according to above steps. If problems cannot be
solved, please contact our local dealers or customer service department. Since
there are components with high voltage inside the unit, please DO NOT maintain it
by yourself for the sake of your safety.
-17-
