SOIL TEST RECORD

LAB NO. KSR/TC/24/00007 DATE:-

SIEVE ANALYSIS LIQUID LIMIT (Take 120 gm of soil passing through 425μ sieve) SIEVE ANALYSIS SAMPLE-1

MATERIAL RETAINED IN g Determination No. 1 2 3 4

% tage
Sieve Sizes
retained
SAMPLE-1 SAMPLE-2 SAMPLE-3 No. Of Blows 34 26 11

20.00 0.00 Container No. 1 5 7 0.00

10.00 0.00 Wt. of Container 0.00
21.950 23.515 23.868
4.75 0.00 (W0) gm 0.00
2.00 0.000 Wt. of Container + Wet 0.00
41.905 47.043 46.333
1.18 0.840 Soil (W1) gm. 0.42
0.600 0.440 Wt. of Container + Dry 0.22
37.773 42.141 41.545
0.425 0.560 Soil (W2) gm. 0.28
0.300 2.100 Wt. of Water 1.05
4.132 4.902 4.788 0.000
0.150 10.120 Ww =(W1 -W2) gm. 5.06
0.075 16.660 Wt. of Oven dried Soil Wd 8.33
15.823 18.626 17.677 0.000
PAN 1.26 =(W2 -W0) gm.
Soil Classification
Gravel
TOTAL 200.00 26.114 26.318 27.086 #DIV/0! Size(G)
Water Content =
FREE SWELL INDEX (Ww/Wd) X 100 % LIQUID LIMIT, % GRAVEL %
43
PLASTIC LIMIT (Take 20 gm of soil passing through MOISTURE 80mm-
425μ sieve) CONTENT 4.75mm
Take 10 gm of soil passing through 425micron
sieve and place in two measuring cylinders Determination No. 1 2 1 2 0.00
Container No. 18 54 21 36 0.00

Volume in Kerosene Wt. of Container

6 11 20.516 17.115 19.563 17.556 48.000
(Vk) (W0) gm
47.000
Volume in Water Wt. of Container + Wet 46.000
18 16 29.600 27.131 47.225 45.367 45.000
(Vd) Soil (W1) gm.

Water Content, %
44.000
Free swell Index 200.0 45.5 43.000
Wt. of Container + Dry
=(Vd-Vk)/Vk X 100 = 28.010 25.335 43.543 41.908
122.7 Soil (W2) gm. 42.000
41.000
SPECIFIC GRAVITY
zz 1.59 1.80 3.68 3.46 40.000
Wt. of Density 39.000
bottle(W1)gm
35.496 35.159
Wt. of Oven dried Soil Wd 38.000
7.49 8.22 23.98 24.35
Wt. of Density bottle+soil =(W2 -W0) gm. 37.000
(W2)gm
43.505 43.17
Water Content = 36.000
21.2 21.8 15.4 14.2 1 25
Wt. of Density (Ww/Wd) X 100 %
bottle+soil+Water 90.778 90.436 No.Of Blows
(W3)gm PLASTIC LIMIT,% 22 14.78

Wt. of Density bottle +

Water (W4)gm
85.972 85.625 PLASTICITY INDEX,% 21

SP.GR @ 27·C 2.50 2.50 SP.GR @ 27·C 2.50

 CALIFORNIA BEARING RATIO
Sample Description: Date of Sampling:
Source : Date of Casting:
Dia of Mould : 14.9 cm Date of Testing:
Period of soaking 96 hours Proving Ring reading
Wt. of surcharge 5.00 Kg MDD of sampl. gm/cc 1.82
Correction Factor OMC of sample % 15.71
Unit standard load in 2.5mm penetration-1370 kgf
Unit standard load in 5mm penetration-2055 kgf
Unit Weight of sample and moisture content Determination
No of Blows
Mould No 1 2 3
Before Before After Before
Condition of sample After Soaking After Soaking
soaking soaking Soaking soaking
Wt.of mould., W1 gm 6650.5
Wt.of Wet sample + mould, W2 gm 11285.5
Wt.of Wet sample, W3 =W2-W1 gm 4635 0 0 0 0 0
Volume of mould / sample., V cc 2214 2220 2220 2220 2220 2220
Wet Density of Sample Yb=W3/V gm/cc 2.09 0.00 0.000 0.000 0.000 0.000
Container no. 22 3 4 5 6
Wt.of container., W4 gm 16.225
Wt.of wet sample + cont., W5 gm 36.65
Wt.of dry sample + cont., W6 gm 34.575
Wt.of water., W7 = W5 - W6 gm 2.07 0.00 0.00 0.00 0.00 0.00
Wt.of dry sample.,W8 =W6 - W4 gm 18.35 0.00 0.00 0.00 0.00 0.00
Moist. Content, m= W7/W8 x100 % 11.31 #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! CALIFORNIA BEARING RA
Dry density of sample
800
gm/cc 1.88 #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Yd=(((Yb/((100+m)/100)))
Mould No. Unsoaked Soaked 700

Penetratio
Penetration Load in
Sr. No. Load, kN Load in kgf Sr. No. n Load, kN 600
in mm kgf
in mm
L
1 0.5 0.77 79 1 0.5 0.60 61 o 500
2 1.0 176 2 1.0 111
a
1.73 1.09
d
3 1.5 2.78 283 3 1.5 1.70 173 400
4 2.0 3.79 386 4 2.0 2.41 246 i
n
5 2.5 4.21 429 5 2.5 3.14 320 300
6 3.0 5.82 593 6 3.0 3.94 402 k
7 4.0 7.30 744 7 4.0 5.38 549 g
200
8 5.0 6.27 639 8 5.0 6.29 641
9 7.5 4.44 453 9 7.5 5.25 535
100
10 10.0 3.97 405 10 10.0 5.14 524
11 12.5 3.83 391 11 12.5 5.09 519
0
Average CBR Value of Sample from Curve in 2.5mm Penetration( % ) 429 31.3358 0.0 2.5 5.0 7.5 1
Unsoaked CBR = 31.33580479
Average CBR Value of Sample from Curve in 5.0mm Penetration( % ) 639 31.11251 Penetration in mm
Average CBR Value of Sample from Curve in 2.5mm Penetration( % ) 5 0.364964
0 CBR = 0
Average CBR Value of Sample from Curve in 5.0mm Penetration( % ) 8 0.389294
Expansion Ratio
Final Dial reading 2.48
Initial Dial Reading 0 1 9.81
Initial Height of Specimen 127.3 50.45872 495
Expansion Ratio 1.95% MAXIMUM DRY DENSITY (STANDARD PROTO
California Bearing Ratio 3133.58% LIGHT COMPACTION
1.84
1.82

3)
1.80
 1.84

MAXIMUM DRY DENSITY (STANDARD PROTOR TEST)-LIGHT COMPACTION 1.82

Dry Density, (gm/cm3)

1.80
Diameter Of Mould = 9.98 cm Type of Test = Light Compaction 1.78
Height Of Mould = 12.76 cm Weight of Hammer = 2.6 kg.
1.76
Volume Of Mould = 998 cm3 No. Of layers= 3
Weight Of Mould = 3439.5 kg. No. Of Blows= 25 for each layer 1.74
1.72
Condition of sample 1 2 3 4 5 6
1.70
Wt.of mould., W1 gm 1996.5 1996.5 1996.5 1996.5 1996.5
1.68
Wt.of Wet sample + mould, W2 gm 3765.5 3909 4007 4023.5 3958.5 0.00 2.00 4.00 6.00 8.00 10.00 12.0
Wt.of Wet sample, W3 =W2-W1 gm 1769 1912.5 2010.5 2027 1962 0
Water Content, (%)
Volume of mould / sample., V cc 998 998 998 998 998 998
Wet Density of Sample Yb=W3/V gm/cc 1.77 1.92 2.01 2.03 1.97 0.00
Water Content Determination 1 2 3 4
Container no. 36 16 26 24 14 17 25
Wt.of container., W4 gm 25.437 23.864 24.553 23.904 23.866 24.117 23.379
Wt.of wet sample + cont., W5 gm 56.114 57.473 60.249 63.749 61.484 61.045 58.698
Wt.of dry sample + cont., W6 gm 54.795 56.04 57.631 60.817 57.809 57.374 54.403
Wt.of water., W7 = W5 - W6 gm 1.32 1.43 2.62 2.93 3.68 3.67 4.30
Wt.of dry sample.,W8 =W6 - W4 gm 29.36 32.18 33.08 36.91 33.94 33.26 31.02
Moist. Content, m= W7/W8 x100 % 4.49 4.45 7.91 7.94 10.83 11.04 13.84

Avg Moist. Content % 4.47 7.93 10.93 13.78 17.66 #DIV/0!

Dry density of sample
gm/cc 1.70 1.78 1.82 1.78 1.67 #DIV/0!
Yd=(((Yb/((100+m)/100)))
Optimum Moisture Content % 10.93
MAXIMUM DRY DENSITY (MODIFIED PROTOR
Max Dry density of soil gm/cc 1.82 HEAVY COMPACTION
2.00
MAXIMUM DRY DENSITY (MODIFIED PROTOR TEST)-HEAVY COMPACTION 1.98

Dry Density, (gm/cm3)

Diameter Of Mould = 9.986 cm Type of Test = Heavy Compaction 1.96
Height Of Mould = 12.765 cm Weight of Hammer = 4.6 kg. 1.94
Volume Of Mould = 1000 cm3 No. Of layers= 5
Weight Of Mould = 3439.5 kg. No. Of Blows= 25 for each layer 1.92
10 12 14 16 18 1.90
Condition of sample 1 2 3 4 5 6
1.88
Wt.of mould., W1 gm 3439.5 3439.5 3439.5 3439.5 3439.5
Wt.of Wet sample + mould, W2 gm 5535.9 5595.2 5622.9 5598.2 1.86
7.00 8.00 9.00 10.00 11.00 12.00
Wt.of Wet sample, W3 =W2-W1 gm 2096.4 2155.7 2183.4 2158.7 -3439.5 0
Volume of mould / sample., V cc 998 998 998 998 998 998 Water Content, (%)
Wet Density of Sample Yb=W3/V gm/cc 2.10 2.16 2.19 2.16 -3.45 0.00
Water Content Determination 1 2 3 4
Container no. 23 1 4 40 51 15 29
Wt.of container., W4 gm 19.504 20.445 14.495 19.254 17.125 16.584 19.896
Wt.of wet sample + cont., W5 gm 51.894 47.699 41.59 56.576 40.14 51.347 54.225
Wt.of dry sample + cont., W6 gm 49.521 45.836 39.276 53.369 37.733 47.7 50.185
Wt.of water., W7 = W5 - W6 gm 2.37 1.86 2.31 3.21 2.41 3.65 4.04
Wt.of dry sample.,W8 =W6 - W4 gm 30.02 25.39 24.78 34.11 20.61 31.12 30.29
Moist. Content, m= W7/W8 x100 % 7.91 7.34 9.34 9.40 11.68 11.72 13.34

Avg Moist. Content % 7.62 9.37 11.70 13.54 #DIV/0! #DIV/0!

Dry density of sample
gm/cc 1.95 1.97 1.96 1.90 #DIV/0! #DIV/0!
Yd=(((Yb/((100+m)/100)))
Optimum Moisture Content % 11.70
Max Dry density of soil gm/cc 1.96
 Permeability
Description 1 2 3 Description 1 2 3
diameter od the specimen, D 9.93 9.93 9.93 diameter od the specimen, D 9.93 9.93 9.93
Length of the specimen, L 13 13 13 Length of the specimen, L 13 13 13
Area of the specimen ,A 77.44 77.44 77.44 Area of the specimen ,A 77.44411 77.44410736 77.444107
Initial head, H1 0 0 0 Initial head, H1 72 72 72
Final Head, H2 60.5 60.6 60.8 Final Head, H2 62.2 62.5 63
Head loss, H 60.5 60.6 60.8 Diameter of the stand pipe, d 2.004 2.004 2.004
Quantity of water collected, Q 25 24 23 Area of the stand pipe, a 3.154172 3.154171591 3.1541716
Time required, t 5.48 5.36 5.22 initial time,t1 0 0 0
final time, t2 2.1 2.22 2.05
Constant gead permeability 0.0126578 0.0124031 0.01216491
time required, t 2.1 2.22 2.05
variable head permeability 0.0369 0.0338 0.0345
Average permeability,cm/sec 0.0124
Average permeability,cm/sec 0.0350
 Direct shear test

G 2.50 2.50 2.50

Length cm. 6 6 6
W cm. 6 6 6
t cm. 2.5 2.5 2.5
Area cm2 36 36 36
initial wt gr 184.267 185.201 183.223
final wt gr 184.449 184.153 180.893
mdd g/cc 1.86 1.86 1.86
omc % 13.61 13.61 13.61

cont no. 26 36 22
e wt 49.132 21.084 21.625
e+wet 229.629 31.336 31.919
e+dry 209.077 30.136 30.658
0.128494169870893 0.132567388422448 0.139599247204694
Normal stress 0.5 kg/cm2 Normal stress 1.0 kg/cm2 Normal stress 1.5 kg/cm2
shear shear
Displacement, Corrected shear Displacem Correcte Displacement, Correcte
Load Load stress,kg Load stress,kg/c
mm area,cm2 stress,kg/cm2 ent,mm d area mm d area
/cm2 m2
0.10 0.00 35.94 0.00 0.10 0.1 35.94 0.28 0.10 6.1 35.94 17.31
0.20 0.10 35.88 0.28 0.20 2.4 35.88 6.82 0.20 23.1 35.88 65.65
0.30 0.10 35.98 0.28 0.30 12.6 35.82 35.87 0.30 32.6 35.82 92.80
0.50 0.20 35.70 0.57 0.50 23.6 35.70 67.41 0.50 37.2 35.70 106.26
0.70 0.30 35.58 0.86 0.70 28.9 35.58 82.83 0.70 40.8 35.58 116.93
1.00 2.10 35.40 6.05 1.00 31.9 35.40 91.89 1.00 43.6 35.40 125.59
1.50 7.60 35.10 22.08 1.50 34.5 35.10 100.23 1.50 45.5 35.10 132.19
2.00 10.60 34.80 31.06 2.00 36.0 34.80 105.49 2.00 46.9 34.80 137.43
2.50 12.60 34.50 37.24 2.50 37.2 34.50 109.95 2.50 47.9 34.50 141.58
3.00 14.30 34.20 42.64 3.00 38.0 34.20 113.30 3.00 48.6 34.20 144.91
3.50 16.70 33.90 50.23 3.50 38.5 33.90 115.81 3.50 48.4 33.90 145.59
4.00 18.30 33.60 55.54 4.00 38.6 33.60 117.15 4.00 48.1 33.60 145.98
4.50 20.20 33.30 61.86 4.50 38.5 33.30 117.90 4.54 47.7 33.28 146.17
5.00 21.50 33.00 66.44 5.00 38.9 33.00 120.20 5.00 46.8 33.00 144.61
5.50 22.90 32.70 71.41 5.50 39.3 32.70 122.55 5.50 45.7 32.70 142.51
6.00 23.80 32.40 74.91 6.00 38.8 32.40 122.11 6.00 43.9 32.40 138.17
6.50 24.50 32.10 77.83 6.50 38.6 32.10 122.62 6.50 42.1 32.10 133.74
7.00 28.50 31.80 91.39 7.00 38.3 31.80 122.81 7.00 40.9 31.80 131.15
7.50 25.30 31.50 81.90 7.50 38.0 31.50 123.01 7.50 40.2 31.50 130.14
8.00 25.00 31.20 81.71 8.00 37.8 31.20 123.54 8.00 39.6 31.20 129.43
8.50 24.60 30.90 81.18 8.50 37.7 30.90 124.41 8.50 39.6 30.90 130.68
9.00 24.20 30.60 80.64 9.00 37.6 30.60 125.30 9.00 39.5 30.60 131.63
9.50 23.70 30.30 79.76 9.50 37.5 30.30 126.20 9.50 39.2 30.30 131.92
10.00 23.50 30.00 79.88 10.00 37.4 30.00 127.12 10.00 46.3 30.00 157.38
10.50 23.10 29.70 79.31 10.50 37.3 29.70 128.07 10.50 46.2 29.70 158.62
11.00 22.90 29.40 79.43 11.00 37.2 29.40 129.03 11.00 45.8 29.40 158.85
11.50 22.80 29.10 79.90 11.50 37.2 29.10 130.36 11.50 45.6 29.10 159.79
 12.00 22.60 28.80 80.02 12.00 37.1 28.80 131.36 12.00 45.2 28.80 160.04
f(x) = 68.6491339397334 x + 58.9467764538304
R² = 0.991064764586002
Normal stress,N/mm2 shear stress,N/cm2 Chart Title
0.5 91.3896606
1.6
1 131.359276
1.5 160.038795
from calculation C 58.9467764538 1.4

PI 89.1654413659
68.64913394 C 0.3508 1.2
from graph
89.1654413659 PI 0
1.55623053083 1

Shear stress
0.8

0.6

0.4

0.2

0
0.4 0.6 0.8 1 1.2 1.4 1.6

Normal stress
 ULR No. : ----
Report No. : KSR/TC/24/00007 Report Date : 4-Apr-24
Customer Details : Landmark Material Testing and Research Laboratory Private Limited Jaipur
G-200, RIICO Industrial Area, Mansarovar, Jaipur-302020.
Site Details: G-200, RIICO Industrial Area, Mansarovar, Jaipur-302020

Customer's Reference : TR Dated 19/03/2024 Lab No. : 24/00007/1,7/2,7/3

Location : Jaipur* Date of Receipt : 19-Mar-24

Depth : NA Date of Sampling : NA
Sample for : Proficiency Testing Date of Completion of Test : 3-Apr-24
Condition of Sample : Disturbed Room Temp. : NA
Sample Drawn by : By Customer Sample ID : LPTM/SOIL/A05/24*

Soil Tests as per Indian Standard:

Grain Size Analysis Plasticity Index

Field Moisture Free Swell
Coarse Medium Fine Liquid Plastic Specific Gravity
Test No Content Gravel Silt & Clay Index
Sand Sand Sand Limit Limit
% % % % % % % % %

1 14.8 0 0 0 14 85 43.0 22 2.50 122.73

Laborotory Proctor Test CBR

Type of
Test No MDD OMC Test No
Compaction
Penetration at Unsoaked,% Soaked, %
gm/cm3 %
1 Light 1.82 10.93 2.5 mm 3133.6% 36.5%
1
2 Heavy 11.70 1.96 5 mm 3111.3% 38.9%

Test
No Type of permeability Laboratory permeability test
Trails 1 2 3 Average k, cm/sec
1 Constant Head, cm/sec 0.0127 0.0124 0.0122 0.012
2 Variable Head, cm/sec 0.0369 0.0338 0.0345 0.035

Direct shear test, UU

c, kg/cm2 58.95
pi, ˚ 89.17
 RAW DATA
ULR No. : ----
Report No. : KSR/TC/24/00007 Report Date : 04/Apr/2024
Customer's Name : -

Site Details: -
Customer's Reference : TR Dated 19/Mar/2024 Lab No. : 24/00007/1,7/2,7/3
Location : Jaipur* Date of Receipt : 19/Mar/2024
Depth : NA Date of Sampling : NA
Sample for : Proficiency Testing Date of Completion of Test : 03/Apr/2024
Condition of Sample : Disturbed Room Temp. : NA
Sample Drawn by : By Customer Sample ID : LPTM/SOIL/A05/24*
TEST REPORT
Mechanical Testing - Soil and Rock : Soil

** Temperature : NA
Sr.No. Test Parameter Test Method Result Unit
1 Field Moisture Content IS : 2720 (Part-2) RA:2020 14.78 %
Sieve Analysis
Gravel 0.00 %
2 IS : 2720 (Part-4)RA : 2020
Sand 15.36 %
Silt And Clay 84.64 %
3 Liquid Limit IS : 2720 (Part-5) RA:2020 43 %
4 Plastic Limit IS : 2720 (Part-5) RA:2020 22 %
5 Plasticity Index IS : 2720 (Part-5) RA:2020 21 %
6 Specific Gravity IS : 2720 (Part-3/Sec-1) RA:2021 2.50
Light Compaction
Maximum Dry Density IS : 2720 (Part-7)RA :2021 1.82 gm/cm3
Optimum Moisture Content 10.93 %
7
Heavy Compaction
Maximum Dry Density IS : 2720 (Part-8)RA :2020 1.96 gm/cm3
Optimum Moisture Content 11.70 %
8 Free Swell Index IS : 2720 (Part-40) RA:2020 122.73 %
9 CBR Unsoaked IS : 2720 (Part-16) RA:2021 3133.58% %
Constant head IS : 2720 (Part-17) RA:2021 0.012 cm/sec
10 Permeability
Variable head IS : 2720 (Part-17) RA:2021 0.035 cm/sec
C 58.95 kg/cm2
11 Direch shear, UU IS : 2720 (Part-13) RA:2021
pi 89.17 ˚
** Indicates Temperature for Specific Gravity of Soil.

Tested by Reviewed By Approved by

Mr. Ritesh Ms. Shruthi V Mr. Naveen Hanchinal
Test Engineer Quality Manager Technical Manager
NOTES:-
1) The report related only to the particular sample(s) submitted for testing. We are not responsible for the quality of work executed at site for which this sample is tested.
2) This report shall not be reproduced, EXCEPT IN FULL without the written approval of our laboratory.
3) The report is intended only for your guidance and not for legal purpose or for advertisement.
4) The sample will be destroyed after 15 days from date of issue of test certificate unless otherwise specified.
5) Any complaints about this test report should be communicated in writing within 7 days of issue of this report.
6) Total liability at KSR - Geotechnical Testing and Research Solutions Private Limited is limited to invoiced amount only.
7) Any correction invalidates this report.
8) (*)The data mentioned are as reported by the customer representative / Work order.

---- END OF REPORT ---- PAGE 8/10

 TEST REPORT
ULR No. : ----

Report No. : INS/22/QC-B/SOIL/05 Report Date : 4-Apr-24

Landmark Material Testing and Research Laboratory Private Limited Jaipur
Customer's Name : G-200, RIICO Industrial Area,
Mansarovar, Jaipur-302020.
Agency's Name : Err:509

Site Details: G-200, RIICO Industrial Area, Mansarovar, Jaipur-302020

Customer's Reference : TR Dated 19/03/2024 Lab No. : QC-B/SOIL/05

Location : Jaipur* Date of Receipt : 19-Mar-24

Depth : NA Date of Sampling : NA
Sample for : Proficiency Testing Date of Completion of Test : 3-Apr-24
Condition of Sample : Disturbed Sample Drawn by : By Customer
TEST RESULTS
** Temperature : NA
Sr.No. Test Parameter Test Method Result Unit
1 Field Moisture Content IS : 2720 (Part-2) RA:2020 14.78 %
Sieve Analysis
Gravel 0.00 %
2 IS : 2720 (Part-4)RA : 2020
Sand 15.36 %
Silt And Clay 84.64 %
3 Liquid Limit IS : 2720 (Part-5) RA:2020 43 %
4 Plastic Limit IS : 2720 (Part-5) RA:2020 22 %
5 Plasticity Index IS : 2720 (Part-5) RA:2020 21 %
6 Specific Gravity IS : 2720 (Part-3/Sec-1) RA:2021 2.50
Light Compaction
Maximum Dry Density IS : 2720 (Part-7)RA :2021 1.82 gm/cm3
Optimum Moisture Content 10.93 %
7
Heavy Compaction
Maximum Dry Density IS : 2720 (Part-8)RA :2020 1.96 gm/cm3
Optimum Moisture Content 11.70 %
8 Free Swell Index IS : 2720 (Part-40) RA:2020 122.73 %
9 CBR Unsoaked IS : 2720 (Part-16) RA:2021 3133.58% %
Constant head IS : 2720 (Part-17) RA:2021 0.012 cm/sec
10 Permeability
Variable head IS : 2720 (Part-17) RA:2021 0.035 cm/sec
C 58.95 kg/cm2
11 Direch shear, UU IS : 2720 (Part-13) RA:2021
pi 89.17 ˚
C Err:508 kg/cm2
12 Traiaxial, UU Err:509
pi Err:508 ˚
** Indicates Temperature for Specific Gravity of Soil.

Checked by Authorized Signatory

Mr. Ritesh Mr. Naveen Hanchinal
Dy. Technical manager Technical Manager
NOTES:-

1) The report related only to the particular sample(s) submitted for testing. We are not responsible for the quality of work executed at site for which this sample is tested.

2) This report shall not be reproduced, EXCEPT IN FULL without the written approval of our laboratory.
3) The report is intended only for your guidance and not for legal purpose or for advertisement.
4) The sample will be destroyed after 30 days from date of issue of test certificate unless otherwise specified.
5) Any complaints about this test report should be communicated in writing within 7 days of issue of this report.
6) Total liability at KSR - Geotechnical Testing and Research Solutions Private Limited is limited to invoiced amount only.
7) Any correction invalidates this report.

---- END OF REPORT ---- PAGE 9/10

8) (*)The data mentioned are as reported by the customer representative / Work order.

---- END OF REPORT ---- PAGE 10/10