PT 2,5/ 2-5,0-H - PCB terminal block

1935776
[Link]

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.

Printed circuit board terminal, nominal current: 32 A, rated voltage (III/2): 400 V, nominal cross
section: 2.5 mm2, number of potentials: 2, number of rows: 1, number of positions per row: 2,
product range: PT 2,5/..-H, pitch: 5 mm, connection method: Screw connection with wire
protector, screw head form: H1L Slotted Phillips recess, mounting: Wave soldering,
conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]:
4.1 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. When
using ferrules, 250 V are only achieved in combination with overvoltage category/degree of
pollution II/2.

Your advantages
• Well-known connection principle allows worldwide use
• Low temperature rise, thanks to maximum contact force
• High terminal block capacity thanks to rectangular terminal block space
• Allows connection of two conductors
• The latching on the side enables various numbers of positions to be combined

Commercial data
Item number 1935776
Packing unit 250 pc
Minimum order quantity 250 pc
Product key AAMFNA
Catalog page Page 427 (C-1-2013)
GTIN 4017918948399
Weight per piece (including packing) 2.38 g
Weight per piece (excluding packing) 2.282 g
Customs tariff number 85369010
Country of origin PL

Jan 22, 2025, 11:17 AM Page 1 (10)

PT 2,5/ 2-5,0-H - PCB terminal block
1935776
[Link]

Technical data

Product properties
Product type Printed circuit board terminal
Product family PT 2,5/..-H
Product line COMBICON Terminals M
Type PC termination block
Number of positions 2
Pitch 5 mm
Number of connections 2
Number of rows 1
Number of potentials 2
Pin layout Linear pinning
Solder pins per potential 1

Electrical properties
Nominal current IN 32 A
Nominal voltage UN 400 V
Rated voltage (III/3) 250 V
Rated surge voltage (III/3) 4 kV
Rated voltage (III/2) 400 V
Rated surge voltage (III/2) 4 kV
Rated voltage (II/2) 630 V
Rated surge voltage (II/2) 4 kV

Connection data

Connection technology
Type PC termination block
Nominal cross section 2.5 mm²

Conductor connection
Connection method Screw connection with wire protector
Conductor cross section rigid 0.5 mm² ... 4 mm²
Conductor cross section flexible 0.5 mm² ... 4 mm²
Conductor cross section AWG 20 ... 10
Conductor cross section flexible, with ferrule without plastic 0.5 mm² ... 2.5 mm²
sleeve
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.5 mm² ... 2.5 mm²
2 conductors with same cross section, solid 0.5 mm² ... 1.5 mm²
2 conductors with same cross section, flexible 0.5 mm² ... 1.5 mm²
2 conductors with same cross section, flexible, with ferrule 0.5 mm² ... 0.75 mm²
without plastic sleeve
2 conductors with the same cross section, flexible, with TWIN 0.5 mm² ... 1.5 mm²
ferrule with plastic sleeve

Jan 22, 2025, 11:17 AM Page 2 (10)

PT 2,5/ 2-5,0-H - PCB terminal block
1935776
[Link]

Stripping length 6.5 mm

Drive form screw head Slotted Phillips recess (H1L)
Tightening torque 0.45 Nm ... 0.5 Nm

Mounting
Mounting type Wave soldering
Pin layout Linear pinning

Material specifications

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC
60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics Tin-plated
Metal surface terminal point (top layer) Tin (3 - 12 µm Sn)
Metal surface terminal point (middle layer) Nickel (1.5 - 4 µm Ni)
Metal surface soldering area (top layer) Tin (3 - 12 µm Sn)
Metal surface soldering area (middle layer) Nickel (1.5 - 4 µm Ni)

Material data - housing

Color (Housing) green (6021)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2- 775
13
Temperature for the ball pressure test according to EN 60695- 125 °C
10-2

Notes
Note on application For safe conductor connection, always adhere to a defined
tightening torque. Particularly in the case of PCB terminal blocks
with two or three positions, the individual solder pin for each
contact point cannot compensate for this. That is why the
terminal blocks must be supported during conductor connection
(held with one hand, support on the housing).

Dimensions
Dimensional drawing

Pitch 5 mm

Jan 22, 2025, 11:17 AM Page 3 (10)

PT 2,5/ 2-5,0-H - PCB terminal block
1935776
[Link]

Width [w] 10 mm
Height [h] 17.6 mm
Length [l] 9 mm
Installed height 13.5 mm
Solder pin length [P] 4.1 mm
Pin dimensions ø 1 mm

PCB design
Pin spacing 5 mm
Hole diameter 1.3 mm

Mechanical tests

Test for conductor damage and slackening

Specification IEC 60999-1:1999-11
Result Test passed

Pull-out test
Specification IEC 60999-1:1999-11
Conductor cross section/conductor type/tractive force 0.5 mm² / solid / > 20 N
setpoint/actual value
0.5 mm² / flexible / > 20 N
4 mm² / solid / > 60 N
4 mm² / flexible / > 60 N

Electrical tests

Temperature-rise test
Specification IEC 60947-7-4:2019-01
Requirement temperature-rise test The sum of ambient temperature and temperature rise of the
PCB terminal block shall not exceed the upper limiting
temperature.

Short-time withstand current

Specification IEC 60947-7-4:2019-01

Insulation resistance
Specification IEC 60512-3-1:2002-02
Insulation resistance, neighboring positions > 5 MΩ

Air clearances and creepage distances |

Specification IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09
Insulating material group I
Comparative tracking index (IEC 60112) CTI 600
Rated insulation voltage (III/3) 250 V
Rated surge voltage (III/3) 4 kV
minimum clearance value - non-homogenous field (III/3) 3 mm
minimum creepage distance (III/3) 3.2 mm
Rated insulation voltage (III/2) 400 V

Jan 22, 2025, 11:17 AM Page 4 (10)

PT 2,5/ 2-5,0-H - PCB terminal block
1935776
[Link]

Rated surge voltage (III/2) 4 kV

minimum clearance value - non-homogenous field (III/2) 3 mm
minimum creepage distance (III/2) 3 mm
Rated insulation voltage (II/2) 630 V
Rated surge voltage (II/2) 4 kV
minimum clearance value - non-homogenous field (II/2) 3 mm
minimum creepage distance (II/2) 3.2 mm

Environmental and real-life conditions

Vibration test
Specification IEC 60068-2-6:2007-12
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 Hz ... 60.1 Hz)
Acceleration 5g (60.1 Hz ... 150 Hz)
Test duration per axis 2.5 h
Test directions X-, Y- and Z-axis

Glow-wire test
Specification IEC 60695-2-10:2013-04
Temperature 850 °C
Time of exposure 5s

Aging
Specification IEC 60947-7-4:2019-01

Ambient conditions
Ambient temperature (operation) -40 °C ... 105 °C (Depending on the current carrying
capacity/derating curve)
Ambient temperature (storage/transport) -40 °C ... 70 °C
Relative humidity (storage/transport) 30 % ... 70 %
Ambient temperature (assembly) -5 °C ... 100 °C

Packaging specifications
Type of packaging packed in cardboard

Jan 22, 2025, 11:17 AM Page 5 (10)

PT 2,5/ 2-5,0-H - PCB terminal block
1935776
[Link]

Drawings

Diagram

52
I [A]

48
44
40 1
36
32
28
24
20
16
12
8 2
4 1 = 4 mm
0
0 10 20 30 40 50 60 70 80 90 100 110
 [°C]
Type: PT 2,5/...-5,0-H

Dimensional drawing

9 a+5
13,5
4,1

4,5 2,5 5
a

Jan 22, 2025, 11:17 AM Page 6 (10)

PT 2,5/ 2-5,0-H - PCB terminal block
1935776
[Link]

Drilling plan/solder pad geometry

a
2,5 5
4,5

1,3

Jan 22, 2025, 11:17 AM Page 7 (10)

PT 2,5/ 2-5,0-H - PCB terminal block
1935776
[Link]

Approvals
To download certificates, visit the product detail page: [Link]

cULus Recognized
 Approval ID: E60425-20030211

Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2
Use group B
300 V 20 A 20 - 12 -
Use group D
300 V 10 A 20 - 12 -

VDE report with production monitoring

 Approval ID: 40029839

Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2
250 V 32 A - 0.5 - 4

Jan 22, 2025, 11:17 AM Page 8 (10)

PT 2,5/ 2-5,0-H - PCB terminal block
1935776
[Link]

Classifications

ECLASS
ECLASS-11.0 27460101
ECLASS-12.0 27460101
ECLASS-13.0 27460101

ETIM
ETIM 9.0 EC002643

UNSPSC
UNSPSC 21.0 39121400

Jan 22, 2025, 11:17 AM Page 9 (10)

PT 2,5/ 2-5,0-H - PCB terminal block
1935776
[Link]

Environmental product compliance

EU RoHS
Fulfills EU RoHS substance requirements Yes
Exemption 6(c)

China RoHS
Environment friendly use period (EFUP) EFUP-50
An article-related China RoHS declaration table can be found in
the download area for the respective article under "Manufacturer
declaration". For all articles with EFUP-E, no China RoHS
declaration table issued and required.

EU REACH SVHC
REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1)
Lead(CAS: 7439-92-1)
SCIP 740a6e5b-27c3-46af-9223-05843bbbf5d1

EF3.0 Climate Change

CO2e kg 0.043 kg CO2e

Phoenix Contact 2025 © - all rights reserved

[Link]

PHOENIX CONTACT GmbH & Co. KG

Flachsmarktstraße 8
D-32825 Blomberg
+49 (0) 5235-3 00
info@[Link]

Jan 22, 2025, 11:17 AM Page 10 (10)