Content.

CONTENT
About The Anvil

About our company

˚ AboutourUs
certification

˚ Our Licenses
our facilities

˚ Our Scope
The Anvil services Erbil facility
˚ Machine Shop Services
˚ Bucking Services
Machine shop services

˚ Welding & Fabrication Services

Installations (tensioning) and disassembly (opening)

˚
welding and fabrication
Hard facing
hard facing
Services
˚ Hard Banding
thermal coating Services

˚ BOP and pressure equipment

Thermal Coating
you can open the video from copy paste no
˚ Inspection, Repair, Remanufacture,
Recertification of Pressure Containing
Equipment
˚ Inspection & Instrumentation Services
˚ Electromechanical Services
˚ Rigs Rental Services
˚ Construction Services
˚ Supply of oilfield Product and Equipment (API
and Non API)
˚ Contact Us
˚ Our clients
˚ Contact Us
About Us
We The Anvil, A Leading Company in the field of General trading & Oilfield Services,
Established and registered in Iraq since 2016.

The Anvil is company which is holding the biggest scope of services with huge Space,
Owned Land of around 230,000 square meters, within Iraq,
to provide multiple services to the customers at single window.
The Anvil developed gradually and have expanded their activities by
providing an outstanding level of service and commitment to their
customers through a collaborative approach.

To address the growing demand for more complex and more

complete services in Iraq, The ANVIL set up joint
venture companies and alliances with
international equipment manufacturers and
service companies and have established market
leadership positions in those activities. We have
combined world leading technical know-how,
local knowledge and support, with some of the
best equipment and service in the oil and power
industry, to provide unrivaled, value for money
services in Iraq

The Anvil Competitive advantage lies in the balance between

quality and cost, which is achieved through smooth effective
value management and responsive customer services.

The Anvil main clients are international services providers international

Oil companies and organizations operating in Iraq.
OUR LICENSES
The Anvil quality management system has been developed under the light of ISO, API, and other
applicable industry standards by The Anvil internationally qualified quality team.

API Q1 SPECIFICARIONS
API MONOGRAMS
• API SPEC 5CT
• API SPEC 7-1
• API SPEC 6A
• API SPEC 16A
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
BENOIT
LEEA
ARNCO
VAM
The Anvil Scope of work and introduction of Services

˚ Manufacture, Inspection and Repair of Downhole Drilling

Equipment

˚ Repair and Remanufacture of Electrical Motors

˚ Calibration and Instrumentation Services

˚ General Machining Services

˚ Lifting Equipment Inspections and Load Testing

˚ Manufacture and Repair of Wellhead and Christmas Tree

Equipment as per API 6AR

˚ Manufacture, Repair and Recertification of Drill-Through

Equipment including Annular, Single and Double RAM as per
API 16AR
˚ Structural Welding and Fabrication Services.
˚ General trading (supply of oil field equipment and logistic
solutions, supply of API and Non-API products, provider of
comprehensive procurement and heavy logistic services for
oilfield operations (rig & equipment movement).
˚ High Velocity Oxygen Fuel Spray (HVOF) Services

˚ Hard Facing Services

˚ Hard banding
MACHINE SHOP SERVICES
Being an API-licensed facility, The Anvil provides precision machining services,
manufacturing and repair of downhole drilling tools, surface equipment and
general machining services for the oil and gas industry following the
API specifications.

The Anvil is capable of servicing and manufacturing drill pipe,

drill collars, HWDP, pup joints, crossover subs, lift subs,
stabilizers and more. Our services include the repair
and machining of relief grooves, Bore backs,
fish necks, float bores and zip grooves.

Our Machine Shop division also offers:

•General precision machining services
•Drill pipe straightening
•Zinc phosphating
•Manganese phosphating
•Stress Relieving services
•Swagging and Expanding Services
•Slot milling and stenciling services
•Heat treatment in 156KW top hat furnace
•Manufacturing and repair of downhole drilling tools
At The Anvil, we aim to develop at fast pace but with attention the local environment.
MAKE-UP AND BREAK-OUT
BUCKING UNIT
Our bucking unit is designed for fast and accurate make-up and
break-out of pipe threads and connections of casing, tubing,
drilling tools and down hole tools up to a maximum
torque of 150,000 ft/lbs.

The unit has enhanced torque control precision to meet the

requirement of premium connections. Our six-cylinder
machine is hydraulically powered, fully rotational,
and is capable of handling sizes ranging from
2 3/8” to 23”.

For handling chrome pipe, we have non marking dies

to avoids marking the surface if pipe and
specialized tools
 WELDING AND FABRICATION
The Anvil specializes in providing fabricated steel and pipe work for various
industries with a specific focus on upstream Oil and Gas technical
requirements. The Anvil offers a full circle fabrication service
including engineering, welding, installation, and
maintenance. From design planning to
installation

we have the solution to all your steel-related needs.

The Anvil’s fully qualified 6G welders cater to both
in-house and on-site projects along with
providing all necessary equipment.
We operate as per ASME, Section
IX quality standard.

HARD FACING
We are doing Stabilizer Blade Redressing with HF1000,
HF3000, HF 5000 for both type of materials Non-Mag & Steel.
Maximum Size which we can handle is 25 ½ inches Diameter.
Also, we are doing redressing of fishing tools by applying
the crushed tungsten Carbide, inserts and blades as per best
industry practices and customer design and drawings

HARD BANDING
Using Technology (ARNCO 100XT, 350XT and
Duraband / Tuffband Hard Banding)
for all sizes of drill pipes, HWDP and drill collars
THERMAL COATING
HVOF COATING
The Anvil has partnered with Castolin Eutectic, a worldwide leader of repair and wear protection, to offer the only thermal
spray high velocity oxy-fuel (HVOF) coating services in Iraq. We are now able to provide HVOF spraying, using the most
sophisticated plant and equipment, advanced robotic work handling and specialist diamond grind finishing
techniques. HVOF coatings solve many severe surfaces attack problems caused by the effects of abrasion, erosion,
corrosion, wear, and high temperature environments and improve the lifetime of the equipment. HVOF coating
is a thermal spray coating process in which the desired material in powder form is injected into the stream
from a controlled feeder, where it gets heated and accelerated onto the surface by means of the
high temperature, high velocity gas stream, producing a dense spray coating.

The advantages of HVOF coatings include:

•HVOF coatings are very clean, hard, and dense with fine homogeneous structures
• Coatings are tenaciously bonded to the substrate with a high degree of bond strength
• HVOF coatings have low compressive stress, which results in very thick coatings
• HVOF coatings are used to improve or restore a component’s surface properties or dimensions, thus extending
equipment life
REPLACEMENT OF CHROME PLATING
HVOF Carbide Coatings have now become a permanent replacement for hazardous Hard Chrome Plating. A few
advantages of HVOF coatings over Hard Chrome plating are as follows:
• More abrasive resistant than Hard Chrome Plating
• They give better fatigue strength to the component
• They provide equally good corrosion protection
PRESSURE CONTROL EQUIPMENT
The Anvil offers inspection, repair, remanufacturing, hydro testing and recertifications of
Blowout preventers (BOPs), wellhead equipment, X-Mas Tree, Manifolds and accumulators
We can also manufacture spools, flanges crossovers and other high-pressure
tools within the API specifications.

PRESSURE TESTING CAPABILITIES

The Anvil offers testing services for BOPs and Wellhead
equipment. Using hydro testing technology ranging up
to 30 000 psi for BOPs, we are the first company in the
region to offer specialized testing for wellhead equipment
with nitrogen gas immersion.

The key benefits of our BOP repair and certification service include:
•High quality and reliability
•Remanufacture to latest industry standards and specifications
•Reduced downtime and cost savings
INSPECTION AND INSTRUMENTATION
BOTTOM HOLE ASSEMBLIES’ INSPECTION
Bottom Hole Assembly (“BHA”) inspection consists of inspection of drill collars, heavy weight drill pipe, cross over
subs, stabilizers, reamers, and bit subs. The inspection of Bottom hole Assemblies includes wet, fluorescent,
magnetic particle inspection of threads and upset areas, and visual inspection of threads for mechanical
damage and over torque. BHA inspections will conform to API RP 7G-2, T.H.Hill DS-1, or any other
standards nominated by the customer.

MAGNETIC PARTICLE INSPECTION

We also offer the Magnetic Particle Inspection (MPI) of drilling rig mast, subbase, pipe
elevators, slips, tongs, sheaves, welded areas of high-pressure lines and other hoisting
and drilling equipment. Most of the above items are inspected, utilizing A.C. Yoke
magnetic flow technique.

EDDY CURRENT INSPECTION

Eddy current flaw detection is an NDT technique that can provide important time and cost savings as the rig
structure does not require sandblasting prior to inspection. The eddy current tool can be applied for various
purposes, such as:
•Crack detection •Material thickness measurement
•Coating thickness measurement •Conductivity measurement for heat damage detection
•Sensitivity to small cracks Some of the advantages of eddy current inspection
•Identification of surface and near surface defects include:
•Minimum requirement for equipment preparation •Ability to inspect complex shapes and sizes of conductive
materials
LOAD TESTING
The Anvil is a Full member of Lifting Equipment Engineers Association (LEEA UK). Our LEEA certified
inspectors are cross trained at ASNT Level II in all the inspection methods mentioned earlier.

INSPECTION TRACKING SYSTEM

The Anvil Soft Tracking System analyses data about every piece of equipment on a client’s
Location that requires inspection and automatically provides recommendation for
reinspection dates. A customer receives an alert with suggested inspection dates
and schedules the service date with The Anvil representatives. The Anvil teams
will monitor the client’s assets inspection expiry dates to ensure all the
equipment on site remains inspected as per quality standards.
In addition, all the inspection reports are uploaded into
secure online reporting system, which always allows
access to inspection reports through The Anvil website.

INSTRUMENTATION SERVICES
Instrumentation is a specialized oilfield service section for systems used on inland
and offshore drilling and servicing rigs. We offer a tightly integrated package of services
including installation, commissioning, on-site trouble shooting, remote support and both in-house
and mobile calibration.
ELECTRO-MECHANICAL SERVICES
ELECTRO-MECHANICAL REPAIR
The Anvil employs leading specialists for rewinding of electrical motors, both AC and DC.
All equipment is remanufactured and repaired to the original equipment manufacturers’
specifications (following EASA Technical Manual), serving industries such as Oil and Gas,
Chemical, Power Generation, Manufacturing, Smelting, Refining, and Cement.

Our team can repair AC and DC motors up to 20,000HP,

generators, transformers, pumps, compressors a switch
gears.Our repair service includes vibration analysis
,electrical testing, balancing and machining..
17
18
 CONTACT US
was

Amir Muhammad Moulud

The CEO

WWW.THEANVIL.COM

19
OUR CLIENTS