Global international operation Whenever & Wherever
You are,All-in-one Mobile App 52 mm
INSTRUCTION MANUAL
2 Gang Wi-Fi Dimmer Switch 50/60Hz
18 mm
Max Power: 2*100W
47 mm
Module MS-105B
50/60Hz
Max Power: 2*100W
Schedule timer Voice control-work Voice control-work Device Sharing
with Google Home with Amazon Alexa
Anywhere
APP
INSTALLATION
Warnings:
1. Installation must be carried out by a qualified WIRING DIAGRAM
electrician in accordance with local regulations. L N
2. Keep the device out of the reach of children.
Mounting Clip
3. Keep the device away from water , damp or hot
environment.
APP 4. Install the device away from strong signal sources
Max Power: 2*100W
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the Switch
device. Switch
50/60Hz
5. Obstruction by concrete wall or metallic
Inhouse local operation materials may reduce the effective operation
Deutsches Handbuch range of the device and should be avoided.
Reset
APP switch
6. Do NOT attempt to disassemble,repair or modify
the device.
App Router Voice control Push switches
1 2 3 4
FAQ MANUAL OVERRIDE
TECHNICAL SPECIFICATIONS Q1: What should I do if I can’t configure the switch The switch module terminal reserves the access of
module?
manual override function for the end-user to switch on/off .
Product type 2 Gang WiFi Dimmer Switch Module M
a. Please check whether device is powered on. • Switch on/off for permanent on/off function.
ax
Po
we
Voltage 90-250V AC r:
2*
50
/6
Notes:
10 0H
0W z
Max Power 2*100w b. Make sure your mobile and switch module
WiFi frequency 2.4GHz WiFi are under the same 2.4 GHz WiFi network. 1) Both the adjustment on App and switch can be reset
Operation temp. -10ºC - +40ºC L c. Whether it’s in good internet conditions.
, the last adjustment remains in memory.
2) The App control is synchronized with the
Case temp. Tc: +80ºC (Max.)
L
1
d. Make sure the password entered in App is correct. manual switch.
Operation range ≤ 200 m
e. Make sure the wiring is correct.
Dims (WxDxH) 52x47x18 mm 2
IP rating IP20 L Q2: What device can be connected to this WiFi switch APP USER MANUAL
Warranty 1 years module?
S
1
S
2
Most of your household electrical appliances can be,
EMC Standard (EMC)
EN 300 328 V2.1.1 (2016-11), N such as lamps, laundry machine, coffe maker, etc.
EN 301489-1 V2.1.1 (2017-02), Q3: What happens if the WiFi goes off?
EN 301489-17 V3.1.1 (2017-02), Wiring Instructions and Diagrams
EN 62311: 2008, EN 55015:2013 You can still control the device connected the switch
[Link] off the power supply before carrying out any module with your traditional switch and once WiFi is
+A1:2015, EN 61547:2009
electrical installation work. active again the device connected to module will
Safety Standard (LVD) connect automatically to your WiFi network.
IEC 60669-2-1:2002/AMD1:2008/ [Link] wires according to the wiring diagram.
Q4: What should I do if I change the WiFi network or
AMD2:2015, IEC 60669-1:1998/
AMD1:1999/AMD2:2006,
[Link] the module into the junction box. change the password?
EN 60669-2-1:2004+A1: 2009+ A2:2010, [Link] the power supply and follow switch module You have to re-connect our WiFi switch module to the
EN 60669-1:2018
configuration instructions. new WiFi network according to the App User Manual. iOS App / Android App
RoHS Standard (RoHS) Q5: How do I reset the device?
Notes: Put your smartphone close to the switch Scan the QR code to download Smart Life App, or
2011/65/EU, (EU) 2015/683
module when you’re configuring, and make Power on/off device 10 times until the beeper on the you can also search keyword “Smart Life” at App
sure you have min. 50% Wi-Fi signal. module sounds continuously. Store or Googleplay to download App.
5 6 7 8
Reset Switch
50/60Hz
Max Power: 2*100W Add Device
Region
Add Device
Mobile number/e-mail address
the indicator blinks rapidly
Obtain verification code
Note:This smart switch module can only be used
Log in or register your account with your mobile with reset switch. Confirm indicator blinks rapidly
number or e-mail address. Type in the verification After the wiring of switch module is done, press
code sent to your mobile or mail box, then set your the return button switch for 10 times (keep time
login password. Click "Create Family" to enter into interval not too short) until the beep sounds
continuously and rapidly as Di-Di-Di... for pairing Open the App, select “+” on top right and choose Make sure your smart phone and WiFi switch
the App.
mode. “Switch (Wi-Fi)” to add device. module are under the same WiFi network at
blinks rapidly (twice a second).
9 10 11 12
Connecting
Make sure your router,mobile,and
APP
device are as close as possible
All Device More
Basic information about the device
Ap
2% Device Name
p
Device added successfully
co
Device Location
nt
ro
Check Network
l
Dimmer
Supported Third-party
Device found Control Others
Register device to the smart cloud
initializing device
Share Device
Voice control
Create Group
Amazon Google
Alexa Assistant Device information
Feedback
Others
50/60Hz
Max Power: 2*100W
When pairing is done, the Dimmer will be Connect to Amazon Alexa or Google Assistant Enjoy your smart life of home automation for
shown on the App, and you are able to change the for voice control, or share the devices with your lighting control by using our All-in-one mobile
The connecting will take about 10-120 seconds to device name to your own taste. families or friends. App wherever you are in the world or simply by
complete depending on your network condition. voice control when you are sitting at home
comfortably.
13 14 15 16
