XBLITZ PARK VIEW

MANUAL

The unit uses high performance chip , support shigh definition and seamless video
. It certificated by CE and FCC . The resolution is FHD1080P . Please read the user
manual carefully before you use the product .

I、Design and Function

1. Power/IR on or off
1) Power on/off
Press and hold the button , turn on the unit , it starts recording automatically .
Press and hold it again , the video is saved automatically before it is turned off .
2) IR on/off
Press the button shortly under standby mode , the IR led is changed between
on/off/auto .
2. OK
1) Record on/off
Press “OK” button under video mode , it starts recording , press it again , it stops
recording
2) Take photo
Press “OK” button under photo mode , it takes photo
3) Play video
Press “ OK ” button under playback mode , the video is played
4) Confirm
Press “OK” button under video mode/photo mode/playback mode , enter into menu
option , press “Up/Down” to choose menu , and press “OK” button to confirm it .
5) Full screen
Press and hold under video mode/photo mode/playback mode , full screen / normal
screen is exchanged
3. Up
1)：Up
For “Up” under menu option and playback mode
2)1CH/2CH exchange
The unit shows 2CH while rear camera is connected . Press “up” button under video
mode , front camera/back camera/picture in picture/2CH is exchanged . Press “Up”
button under photo mode , front camera/back camera is exchanged
3)Motion detection on/off
Press and hold it under standby mode , motion detection is on , press it again ,
motion detection is off .
4)Fast backward
Press “Up” button for fast backward while it’s playback
4. Down
1)Down
For “Down” under menu option and playback mode
2)：Audio on/off
Press “Down” button under video mode , audio is off . Press it again , audio is on
3)：Fast forward
Press “Down” button for fast forward while it’s playback
4)：Parking monitor
Press “Down” button under standby mode ,parking monitor on/off is exchanged
5. Menu
1)：Menu
Press “Menu” button under standby mode , enter into menu option , press
“Up/Down” button to choose menu , press “OK” button to confirm . Press “Menu”
button again until exit menu option

2)：SOS
Press “Menu” button under video mode , the video is locked manually and it won’t
be covered automatically in this case
6. Mode
Press “ Mode” button under standby mode , video mode/photo mode/playback
mode is exchanged

II．Installation instruction

1. Power off the car engine.

 [Link] the TF card in slot .
【Notice】please adopt highs peed TF card （above class6），the capacity is not
less than 512MB，TF card can support up to 32 GB
3. Fasten the device instead of the origianl rear view mirror of car.
[Link] the car charger into cigarette lighter.
[Link] car charger and USB interface of device with charge extension cable.
【Notice】put charging extension cable along the edge of the windscreen.
[Link] the rear camera on the back of car body, and notice the direction, the
cable can put along the vehicle platfond ,insert the plug into DVR rear camera
interface after finishing installation .
7. Adjust the lens and keep the lens parallel with the ground.
[Link] the engine,check if the DVR installed correctly.
【Notice】When DVR is installed in a right way，system working indicator light will be
turned on ； DVR turn on and in video recording mode ， the shoot indicator light will
flash .Please check if the picture of the screen is normal, if the screen picture is
inverted, please contact with us immediately.

III. Function introduction

1. Use auto recording function
Start the car engine, car DVR start recording automatically; charge indicator
light, video lights flashing. Shut down engine, car DVR automatically turn off and
save video. videos save on the TF card in separate, after the TF card is full, video
will overwrite the before video
【 note 】
A. recording time can be set in the menu, scope of 1/2/5 minutes three gears.
B. front and rear camera the video are saved in TF "DCIMA" and "DCIMB" folder
separately.
C. if you choose the video time menu off, when the card will not continue after it is
full.
2. Use the manual recording function
Long press recorder "power button" for 3 seconds, DVR will turn on and start
recording, recording indicator light [Link] you want to shut down just long
press the power button for 3 seconds, DVR can save video and shutdown
automatically.
3. Use the camera function
In stand by mode, short press mode key into photo mode, the left upper corner
of the screen shown by the video into the camera, short press "REC button" can
take photos .If you want to switch back to the video mode, short press mode key
twice.
4. Use motion detection function
In standby mode, long press up key into motion detection mode. When lens detect
moving objects, DVR will start recording, when the lens did not feel the object movement
in 5 seconds, DVR will stop [Link] you want to exit the motion detection mode,
press UP key 3 seconds to exit the motion detection model.
5. Collision induction function
The machine built-in collision sensors (G - sensor), in the event of serious vehicle
collision, recorder will lock the video when the accident happened before 10 seconds
and after 1/2/5 minutes , and display a padlock icon at the lower left screen. Locked files
will saved as a special file, the file will not covered by cycle recording.
"Tip"
A. locked video file named ZW beginning, ordinary file as AW at the beginning.
B. collision sensors (G - sensor) support sensitivity adjustment, according to the actual
use to change the Settings in the Settings menu.
6. One Key lock file function
This machine have one key lock function, can locked the file want be saved and not
covered by cycle. In video mode, short press "menu", the recorder will locked before 10
seconds and after 1/2/5 minutes file.
7. Set time and date
Press [menu button] under the stand-by state condition enter into system setting
menu，short press [up button]/ [down button] and move the cursor to the option of
set time. Press [ok button] enter i to menu to setting.
[Noticed] in order to recorder the obtain evidence of date and time, please set up
the right time before use it.
8. One key mute function
under the working condition, short press [down button], and the microphone on the
left corner of the screen will change to forbidden icon, it means sound recording
function has been turn off, at that time car dvr can just recording but no sound.
Short press [down button]again, the microphone will be turn on.
[Noticed] All you setting will be save automatically, there is no need to set mute
function when you turn on the camera again.
9. U disk mode
Connect Car DVR with the USB interface trough date line. And the screen will
appear three optional mode :disk, camera and charging. Short press [up key]/
[down key], choose the disk, and then short press the ok key enter in to U disk
mode.
10. File playback
Short press the [mode key] twice under the working condition, so can change to the
play back mode. Short press [up key]/[down key], to find the file which you want to
play back, short press [ok key] then can play. For exit play back mode, short press
mode key again is ok.

IIII、Specification

Image sensor 130W

Resolution Front :1920*1080 Back:1280×720
View angle 120 degree
Video Resolution FHD1920x1080,HD1280x720,VGA640×
480
Photo resolution 1280x960,1600x1200,2048x1536
Video format MOV/H.264
Picture format JPEG
Store temperature -30℃~70℃
Operate Temperature 0℃~50℃
Operate humidity 15-65%RH
Memory capacity Support up to 32GB
Voltage DC5V

IMPORTER:
KGK TRADE SP. Z O.O. SP. K.
Os. Teatralne 24
31-946 Kraków, POLAND
[Link]