ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006

: Architecture Assistantship/ Automobile Engineering./ Agricultural Engineering/ Architecture/

Civil Engineering/ Chemical Engineering/ Civil & Rural Engineering/ Construction Technology/
Fashion & Clothing Technology/ Electrical Engineering/ Electrical Power System/ Food
Technology/
Programme Name/s
Interior Design & Decoration/ Interior Design/ Civil & Environmental Engineering/ Mechanical
Engineering/
Mechatronics/ Production Engineering/ Printing Technology/ Polymer Technology/
Textile Technology/ Textile Manufactures
: AA/ AE/ AL/ AT/ CE/ CH/ CR/ CS/ DC/ EE/ EP/ FC/ IX/ IZ/ LE/ ME/ MK/ PG/
Programme Code
PN/ PO/ TC/ TX
Semester : First
Course Title : ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches)
Course Code : 311006

I. RATIONALE

Engineering graphics is the language of engineers. The concepts of graphical language are used in expressing the ideas, conveying
the instructions, which are used in carrying out the jobs on the sites, shop floor etc. This course is useful in developing drafting and
sketching skills in the student. It covers the knowledge & application of drawing instruments & also familiarizes the learner about
Bureau of Indian Standards related to engineering drawing. The curriculum aims at developing the ability to draw and read various
engineering curves, projections and dimensioning styles. The subject mainly focuses on use of drawing instruments, developing
imagination and translating ideas into sketches. The course also helps to develop the idea of visualizing the actual object or part on
the basis of drawings and blue prints. This preliminary course aims at building a foundation for the further courses related to
engineering drawing and other allied courses in coming semesters

II. INDUSTRY / EMPLOYER EXPECTED OUTCOME

Prepare engineering drawing manually using prevailing drawing instruments.

MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme

ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006

III. COURSE LEVEL LEARNING OUTCOMES (COS)

Students will be able to achieve & demonstrate the following COs on completion of course based learning

CO1 - Draw geometrical figures and engineering curves.

CO2 - Apply principles of orthographic projections for drawing given pictorial views.
CO3 - Draw isometric views of given component or from orthographic projections.
CO4 - Use various drawing codes, conventions and symbols as per IS SP-46 in engineering drawing.
CO5 - Draw free hand sketches of given engineering elements.

IV. TEACHING-LEARNING & ASSESSMENT SCHEME

Learning Scheme Assessment Scheme
Actual
Based on LL &
Contact Based on
Theory TL
Course Course Hrs./Week SL
Course Title Abbr Credits Paper Total
Code Category/s SLH NLH Practical
Duration Marks
FA- SA-
CL TL LL Total FA-PR SA-PR SLA
TH TH
Max Max Max Min Max Min Max Min Max Min
ENGINEERING GRAPHICS
311006 (Civil, Electrical, Mechanical EGR DSC 2 - 4 - 6 3 - - - - 50 20 50@ 20 - - 100
and allied branches)

MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme

ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006

Total IKS Hrs for Sem. : 2 Hrs

Abbreviations: CL- ClassRoom Learning , TL- Tutorial Learning, LL-Laboratory Learning, SLH-Self Learning Hours, NLH-
Notional Learning Hours, FA - Formative Assessment, SA -Summative assessment, IKS - Indian Knowledge System, SLA - Self
Learning Assessment
Legends: @ Internal Assessment, # External Assessment, *# On Line Examination , @$ Internal Online Examination
Note :

1. FA-TH represents average of two class tests of 30 marks each conducted during the semester.
2. If candidate is not securing minimum passing marks in FA-PR of any course then the candidate shall be declared as
"Detained" in that semester.
3. If candidate is not securing minimum passing marks in SLA of any course then the candidate shall be declared as fail and
will have to repeat and resubmit SLA work.
4. Notional Learning hours for the semester are (CL+LL+TL+SL)hrs.* 15 Weeks
5. 1 credit is equivalent to 30 Notional hrs.
6. * Self learning hours shall not be reflected in the Time Table.
7. * Self learning includes micro project / assignment / other activities.

♦ Candidate remaining absent in practical examination of any one part of Basic Science course i.e. Physics,Chemistry will
be declare as Absent in Mark List and has to appear for examination. The marks of the part for which candidate was
present will not be processed or carried forward.

V. THEORY LEARNING OUTCOMES AND ALIGNED COURSE CONTENT

Suggested
Theory Learning Outcomes Learning content mapped with Theory Learning Outcomes
[Link] Learning
(TLO's)aligned to CO's. (TLO's) and CO's.
Pedagogies.

MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme

ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Suggested
Theory Learning Outcomes Learning content mapped with Theory Learning Outcomes
[Link] Learning
(TLO's)aligned to CO's. (TLO's) and CO's.
Pedagogies.
Unit - I Basic Elements of Drawing
TLO 1.1 Prepare drawing using
1.1 Drawing Instruments and supporting material: method to use
drawing instruments.
them with applications.
TLO 1.2 Use IS SP-46 for
1.2 Standard sizes of drawing sheets (ISO-A series)
dimensioning
1.3 I.S. codes for planning and layout.
TLO 1.3 Use different types of Model
1 1.4 Letters and numbers (single stroke vertical)
lines. Demonstration
1.5 Convention of lines and their applications.
TLO 1.4 Draw regular
1.6 Scale - reduced, enlarged & full size
geometrical figures.
1.7 Dimensioning techniques as per SP-46 (Latest edition) – types
TLO 1.5 Draw figures having
and applications of chain, parallel and coordinate dimensioning
tangency constructions.
1.8 Geometrical constructions.
Unit - II Engineering curves & Loci of Points.
2.1 Concept and understanding of focus, directrix, vertex and
TLO 2.1 Explain different
eccentricity. Conic sections.
engineering curves with areas of
2.2 Methods to draw an ellipse by Arcs of circle method &
application.
Concentric circles method.
TLO 2.2 Draw different conic
2.3 Methods to draw a parabola by Directrix-Focus method &
sections.
Rectangle method
2 TLO 2.3 Draw involute and Demonstration
2.4 Methods to draw a hyperbola by Directrix-Focus method.
cycloidal curves.
2.5 Methods to draw involutes: circle & pentagon
TLO 2.4 Draw helix and spiral
2.6 Methods to draw Cycloidal curve: cycloid, epicycloid and
curves from given data
hypocycloid
TLO 2.5 Plot Loci of points
2.7 Methods to draw Helix & Archimedean spiral.
from given data.
2.8 Loci of points on Single slider crank mechanism with given
specifications.

MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme

ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Suggested
Theory Learning Outcomes Learning content mapped with Theory Learning Outcomes
[Link] Learning
(TLO's)aligned to CO's. (TLO's) and CO's.
Pedagogies.
TLO 3.1 Explain methods of
Orthographic Projections.
Unit - III Orthographic Projections
TLO 3.2 Draw orthographic
3.1 Introduction of projections-orthographic, perspective, isometric
views of simple 2D entities
and oblique: concept and applications.(No question to be asked in Model
containing lines, circles and arcs
examination) Demonstration
3 only.
3.2 Introduction to orthographic projection, First angle and Third Video
TLO 3.3 Draw the orthographic
angle method, their symbols. Conversion of pictorial view into Demonstrations
views from given pictorial
Orthographic Views – object containing plain surfaces, slanting
views.
surfaces, slots, ribs, cylindrical surfaces. (use First Angle Pr
TLO 3.4 Use of IS code IS SP-
46 for dimensioning technique.
TLO 4.1 Prepare isometric Unit - IV Isometric Projections
scale. 4.1 Introduction to Isometric projection.
TLO 4.2 Draw isometric views 4.2 Isometric scale and Natural Scale.
Model
of simple 2D entities containing 4.3 Isometric view and isometric projection.
Demonstration
4 lines, circles and arcs only. 4.4 Ilustrative problems related to simple objects having plain,
Video
TLO 4.3 Interpret the given slanting, cylindrical surfaces and slots on slanting surfaces.
Demonstrations
orthographic views. 4.5 Conversion of orthographic views into isometric
TLO 4.4 Draw Isometric views View/projection. (For branches other than mechanical Engineering,
from given orthographic views the teacher should select branch specific elements)
TLO 5.1 Sketch proportionate Unit - V Free Hand Sketches of Engineering Elements
freehand sketches of given 5.1 5.1 Free hand sketches of machine elements: Thread profiles,
Model
5 machine elements. nuts, bolts, studs, set screws, washers, Locking arrangements. (For
Demonstration
TLO 5.2 Select proper fasteners branches other than mechanical Engineering, the teacher should
and locking arrangement. select branch specific elements for free hand sketching)

VI. LABORATORY LEARNING OUTCOME AND ALIGNED PRACTICAL / TUTORIAL EXPERIENCES.

Practical / Tutorial / Laboratory Sr Number Relevant
Laboratory Experiment / Practical Titles / Tutorial Titles
Learning Outcome (LLO) No of hrs. COs
MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme
ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Practical / Tutorial / Laboratory Sr Number Relevant
Laboratory Experiment / Practical Titles / Tutorial Titles
Learning Outcome (LLO) No of hrs. COs
LLO 1.1 Use of drawing Draw horizontal, vertical, 30 degree, 45 degree, 60 & 75 degrees
1 2 CO1
instruments lines using Tee and Set squares/ drafter. (Sketch Book).
LLO 2.1 Use of IS code related
2 Draw different types of lines, dimensioning styles (Sketch Book) 2 CO1
to dimensioning standard
Draw one figure showing dimensioning techniques, two problems
LLO 3.1 Practice of drawing as
3 on redraw the figures and one problem on loci of points - slider 2 CO1
per given sketch
crank mechanism. (Sketch Book)
Draw one figure showing dimensioning techniques, two problems
LLO 4.1 Use IS Standard for
4 on redraw the figures and one problem on loci of points - slider 4 CO1
drawing different figures
crank mechanism. (01 Sheet)
LLO 5.1 Identify different
5 Draw any four Engineering Curves (Sketchbook) 2 CO1
Engineering curves
LLO 6.1 Identify different
6 Draw any four Engineering Curves – (01 Sheet) 4 CO1
Engineering curves
LLO 7.1 Apply method of Draw two problems on orthographic projections using first angle
CO2
projection for drawing simple 7 method of projection having plain surfaces, slanting surfaces and 2
CO4
orthographic views slots etc.- ( Sketchbook)
LLO 8.1 Apply method of Draw two problems on orthographic projections using first angle
CO2
projection for drawing simple 8 method of projection having plain surfaces, slanting surfaces and 4
CO4
orthographic views slots etc.- (01 Sheet)
LLO 9.1 Apply method of Draw two problems on orthographic projections using first angle
CO2
projection for drawing complex 9 method of projection having cylindrical surfaces, ribs etc. 2
CO4
orthographic views (Sketchbook)
LLO 10.1 Apply method of Draw two problems on orthographic projections using first angle
CO2
projection for drawing complex 10 method of projection having cylindrical surfaces, ribs etc.- (01 4
CO4
orthographic views Sheet)
LLO 11.1 Draw simple isometric Draw two problems on Isometric view of simple objects having CO3
11 2
projections plain and slanting surfaces by using natural scale. (Sketchbook) CO4

MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme

ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Practical / Tutorial / Laboratory Sr Number Relevant
Laboratory Experiment / Practical Titles / Tutorial Titles
Learning Outcome (LLO) No of hrs. COs
LLO 12.1 Apply different scales
Draw two problems on Isometric view of simple objects having CO3
for drawing isometric 12 4
plain and slanting surfaces by using natural scale. ( 01 sheet) CO4
projections.
Draw two problems on Isometric Projection of objects having
LLO 13.1 Draw simple isometric CO3
13 cylindrical surfaces and slots on slanting surfaces by using 2
projections CO4
isometric scale.(Sketchbook)
Draw two problems on Isometric Projection of objects having
LLO 14.1 Apply different scales CO3
14 cylindrical surfaces and slots on slanting surfaces by using 4
for drawing isometric projections CO4
isometric scale. ( 01 sheet)
Problem Based Learning: Given the orthographic views of at least
LLO 15.1 Draw Orthographic three objects with few missing lines, the student will try to imagine CO2
15 2
views of a given object. the corresponding objects, complete the views and draw these CO4
views (sketch book).
LLO 16.1 Draw standard
Draw freehand Sketches of 12 different standard components
discipline oriented components 16 2 CO5
(Sketch book)
using free hand .
LLO 17.1 Draw standard
Draw freehand Sketches of 12 different standard components (1
discipline oriented components 17 2 CO5
Sheet)
using free hand .
CO1
LLO 18.1 Collect information of CO2
Correlate ancient Indian sculptures, Indian temples, Monuments,
an ancient Indian culture related 18 2 CO3
etc. with Engineering Graphics
to engineering graphics CO4
CO5

VII. SUGGESTED MICRO PROJECT / ASSIGNMENT/ ACTIVITIES FOR SPECIFIC LEARNING / SKILLS
DEVELOPMENT (SELF LEARNING)

MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme

ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
not Applicable

VIII. LABORATORY EQUIPMENT / INSTRUMENTS / TOOLS / SOFTWARE REQUIRED

Relevant LLO
[Link] Equipment Name with Broad Specifications
Number
1 Drawing Table with Drawing Board of Full Imperial/ A1 size. All
2 Models of objects for orthographic / isometric projections 7,8,9,10,11,12,13,14,15
3 Models/ Charts of objects mentioned in unit no. 5 16,17
4 Set of various industrial drawings being used by industries. All
Set of drawings sheets mentioned in section 6.0 could be developed by experienced teachers and
5 All
made used available on the MSBTE portal to be used as reference/standards.
Drawing equipment and instruments for class room teaching-large size: a. T-square or drafter
(Drafting Machine). b. Set squires (450 and 300-600) c. Protector. d. Drawing instrument box
6 All
(containing set of compasses and dividers). Drawing sheets, Drawing pencils, Eraser, Drawing
pins / clips

IX. SUGGESTED FOR WEIGHTAGE TO LEARNING EFFORTS & ASSESSMENT PURPOSE (Specification Table)
[Link] Unit Unit Title Aligned COs Learning Hours R-Level U-Level A-Level Total Marks
1 I Basic Elements of Drawing CO1 3 0 0 6 6
2 II Engineering curves & Loci of Points. CO1 6 0 0 6 6
3 III Orthographic Projections CO2,CO4 7 0 0 14 14
4 IV Isometric Projections CO3,CO4 8 0 0 14 14
5 V Free Hand Sketches of Engineering Elements CO4,CO5 6 0 0 10 10
Grand Total 30 0 0 50 50

X. ASSESSMENT METHODOLOGIES/TOOLS

MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme

ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Formative assessment (Assessment for Learning)

Term work

Summative Assessment (Assessment of Learning)

Practical

XI. SUGGESTED COS - POS MATRIX FORM

Programme
Specific
Programme Outcomes (POs)
Outcomes*
(PSOs)
Course PO-5
Outcomes PO-1 Basic Engineering
(COs) and PO-2 PO-3 Design/ PO-4 Practices for PO-7 Life
PO-6 Project PSO- PSO- PSO-
Discipline Problem Development Engineering Society, Long
Management 1 2 3
Specific Analysis of Solutions Tools Sustainability Learning
Knowledge and
Environment
CO1 3 - - 2 - 2 -
CO2 3 - - 2 - 2 -
CO3 3 - - 2 - 2 -
CO4 3 - - 2 - 2 -
CO5 3 - - 2 - 2 -
Legends :- High:03, Medium:02,Low:01, No Mapping: -
*PSOs are to be formulated at institute level

XII. SUGGESTED LEARNING MATERIALS / BOOKS

MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme

ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
[Link] Author Title Publisher
Bureau of Indian Engineering Drawing Practice for Schools Third Reprint, October 1998 ISBN No. 81-7061-091-
1
Standards. and Colleges IS: SP-46 2
Charotar Publishing House, 2010 ISBN No. 978-93-
2 Bhatt, N.D. Engineering Drawing
80358-17-8
Bhatt, N.D.; Charotar Publishing House, 2010 ISBN No. 978-93-
3 Machine Drawing
Panchal, V. M 80358-11-6
Tata McGraw Hill Edu. New Delhi, 2010, ISBN No.
4 Jolhe, D.A. Engineering Drawing
978-0-07-064837-1
S. Chand and Company New Delhi, ISBN No. 81-
5 Dhawan, R. K. Engineering Drawing
219-1431-0
Pradhan, S.K Jain, Khanna Book Publishing CO(P) LTD, New Delhi,
6 Engineering Graphics
K.K ISBN No. 978-93-91505-50-9

XIII . LEARNING WEBSITES & PORTALS

[Link] Link / Portal Description
1 [Link] Free Hand Sketches
2 [Link] Orthographic Projection
3 [Link] Basics of Projection
4 [Link] Introduction to Engineering Graphics
5 [Link] Isometric Projection

MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme