TECHNOLOGY JAMSHEDPUR
tATIONAL INSTITUTE OF
Department ofMathematics
(Autumn) 2022-23
Mid Semester Examination Branches)
B.Tech. -Isemester (All
Course Name: Mathematics-I
Course Code: MA1101 Max. Marks: 30
Date of Exam:30/01/2023 Time: 2 Hours
symbols are
question paper consists of 5questions. Attempt all questions.All the
Note:1 he
standard.
1 + x+<ei< 1 + x+e* for every x >0.[6]
A. No.1: Using Taylor's theoremn prove that:
2
2
represented by following equation:
Q. No.2: Find all the asymptotes of the curve
[6]
x-6yx +11xy'-6y' +x+y+1 0
function on [a, b] and differentiable on (a, b).
.No.3: () Let f: [a, b]’ Rbe a continuous
is a constant function on [a, b]. (3]
f'(x) = 0for all x E (a, b) then prove that f
x>1- 2 for -TN<X< n [3]
(I) Use Taylor'stheorem to prove that cos
to the functionlog (1+ x) to show that
0. No.4: Apply Lagrange's mean value theorem
[6]
0< [log(1 + x)]-1 -x-1<1
that the sequence {x,}
QNo.5: Define the convergence of sequence and prove
defined by xn =
4n+1
converges to 4. [6]
n+3"
** GOOD LUCK***** *
2022UGGC 0 3
JAMSHEDPUR
NATIONAL INSTITUTE OF TECHNOLOGY
under/-RD, Govenmeni of india)
imoortarce
(An instituon o Norionai
Department of Chemistry
CSE, EE & ECEJ Mid1" Semester Exam2022-23
B.Tech.(CE,
Code: CH1101 Max. Marks: 30
Course: Engineering Chemistry Duration: 02 Hour Day: Friday
Date: Jan 20. 2023
place.
Attempt allthe part of a particular question at one
the square brackets.
Marks of the question are indicated in otherwise stated.
Symbols arnd notations carry usual meaning, uless
indicate it clearly.
Assumesuitable data, if considered necessaru, and
1. Answer the following questions.
process is 50 J. What do you think about
(a) The net work done in an irreversible cyclic
[1]
the net heat absorbed and net change in entropy?
800 °C, when it decomposed.
(b) A sample consisting of 1.0 mo1 CaCOs(s)was heated to
a piston that was initially
The heating was carried out in a container fitted with
decomposition at
resting on the solid: (i) Calculate the work done during complete
piston, the container
1.0 atm. (ii) What work would be done if instead of having a
[2]
was open to the atmosphere?
transacted at constant
(c) Show that the Internal energy arnd enthaipy are the heat
volume and at constantpressure, respectively. [3]
initially at 25 °C and l atm
(d) Consider the following cycle using 1 moi of an ideal gas,
to double the vol
pressure. Step 1: Isothermal expansion against zero pressure
to 1 atm. (a) Calcu
ume. Step 2: Isothermal, reversible compression from 0.5 atm
step 2. (c) Realizing that
late the value of dq/T; mind the sign. (b) Calculate AS for
that AS for step 1is not equal
for the cvcle, AScvcle = 0, find AS for step 1. (d) Show
for step 1 divided by T.
[4]
to the Q
mandatory.
2. All the questions are
Lithium-1on batteries in comparison with Lead-acid
la) What are the advantages of
and Nickel-Cadmium batteries? (2]
neat sketch. [3]
Describe the working of pH meter with a
(b)
1
P.T.0.
B.Tech. Mid 1: Sem Exam 2022-23
Page 2of the Question Paper
working of Lead-Acid rechargea
(c) What are Rechargeable Batteries? Explain the
ble battery. [3]
standard reduction po
(d) Which combination of two electrodes from the following
an electrochemical
tentials, at 25 °C, will give the most feasible construction of
cell potential:
cell and why? Write its cell representation and evaluate standard
() Ecu2+, Cu= +0.34 V; (u) Esm2+_,S= -0.14 V;
(iii) Ecd2t’ Cd = -0.40 V: ( ) EMg2+-, Ma -2.37 V (2]
3. Answer following questions.
(a) What is molal elevation constant? Deduce the relationship between elevation of boiling
point and molecular weight of a non-volatile solute. [3]
(b)Derive the relation between osmoric pressure and lowering of vapour pressure of
a dilute solution of a non-volatile solute and calculate the vapor pressure of
aqueous solution of 1.0 molal glucose solution at 100 °C. [3]
(c) When tissues of skeletal vacuole of a rat were placed in 0.7% NaCI solution at 25
°C, it was observed inicroscopicaliy that they remain unchanged in the above
solution. Freeing point of the above solution is -0.406 C. What is the osmotic
pressure of the tissue cytoplasm? K,=1.86 kgk
n1ol (4]
~ Good Luck ~
2| 2
Registration No. 20 2120GECO3
Student Name: Karuna Srce
Jamshedpur
National Institute of Technology,
January 2023
First Semester (Mid-Sem)Examination - Max. Marks: 30
Branch: CE/CSE/EC/EE Course Code: CS1101
Programning And Data Structures
Course Name: Introduction to Time: 2 Hours
Ashish/ Dr. Reddy
Course Instructors: Dr. Ruhul/ Dr. Gopa/Dr.
Instructions: (Relatcd to Questions)
sequence.
1. Attempt all qestions und write your unswer in thc same
2. Assume that there are no syntax errors from Q7 to gI0.
3
Q1 Write an algorithm to find the factorial of a given number.
8
Q2 Explain the following with example:
(a) Relational Operators
(b) break keyword
(c) Looping statements in C
(d) Compilation process of C program
Q3 Consider the program given below using for loops. Rewrite the program by 2
replacing both the for loops with while loops.
#include <stdio.h>
void main(){
int i, j;
for(i=15; i>0;) {
printf("%d"i);
for(j=i-1; j>0;)
printf("#");
j=j-1;
}
i=i-1;
Q4 Define function in C. what are thà advantages of using function in C? 2
Q5 Write a C Program to find the largest &smallest number in an Array. 6
An electricity board charges the following rates for the use of electricity: for the first 3
Q6
200 units 70 paise per unit, for the next 100 units 80 paise per unit, beyond 300 units
Rs 1 per unit. All users are charged a minimum of Rs. 100 as meter charge. If the total
of total amount ie
amount is more than Rs 400, then an additional surcharge of 20% consumd
number of units
charged. Write a program to read the name of the user,
and print the total charges.
P.T.O
Q7. #include <stdio.h>
Q9. #include <stdio.h>
int main) {
int main(){
int n, final = 0, r;
int low, high, i, flag;
printf("Enter two numbers: ");
printf("Enter an integer: ");
scanf("%d%d", &low, &high);
scanf("%d", &n);
while(n != 0) { while (low<high) {
r=n%10: flag = 0;
final = final*10 +r; for(i 2, i«-low/2; + i){
n = 10;
if(low % i == 0){
flag = 1;
printf("Final Number = %d", final); break,
return 0; }
Suppose input of this program is 62767, what if (flag == 0)
will be the output? (1.5 marks). printf("%d", low):
++\ow;
}
return 0;
}
Suppose input of this program is 10 and 20,
what will be the output? (1.5 marks).
Q8. #include <stdio.h> Q10. #include <stdio.h>
int main(){ int main(){
int number, i; int n1, n2, i, xyz;
printf("Enter a positive integer. "); printf("Enter two integers: ");
scanf("%od",&number); scanf("%d %d",&n1, &n2);
for(i=1; i<s number, ++i) { for(i=1; i<= n1 &&i<=n2; ++i) {
if (number%i ==0){ if(n1%i==0 && n2%i==0)
printf("%d "i); xyz = i;
} printf("X.Y.Z. of %d and %d is %d", n1, n2, xyz):
return 0; return 0;
80 and 153,
Suppose input of this program is 60, what will Suppose input of this program is
be the output? (1.5 marks). what willbe the output? (1.5 marks).
ALL THE BEST
2o22 GECO3
TECHNOLOGY JAMSHEDPUR
NATIONAL INSTITUTE OF
Engineering
Departm ent of Electrical ExaminationSemester
B.Tech, 2022-Batch, Autumn (CE, CSE, ECE, EE)
and Measurement
Subject: Electrical Engincering
Subject Code: EE1101
Time: 02:00PM to 04:00OPM
Full marks: 30 Date of Examination: 23/01/2023
whenever itrequires.
Attempt any Four Questions. Assume appropriate values
theorem, and verify using
1. Find the current in R, for the circuit shown below by using Thevenin's
any other method (Mesh analysis or Nodal Analysis). [7.5]
RL-22
22 22
22
228
10V
10V
Fig.1.
2. a) Find current in allbranches using mesh analysis
method for the circuit given in Fig.2. [S]
W
1.392 0.252
2.4V 1.2V
0.22 0.12
0.498
Fig.2.
b) FindNorton's equivalent circuit given in Fig.3 across
the terminal a and b [2.5]
20V b
302 1092 RL
602 3092
120V L10V
Fig.3.
3.
a) Find the impedance across the terminals A and B for the circuit shown below and draw
the impedance diagram. Frequency of operation is 50Hz. [3.5]
2mH (Li)
ImH (L)
m
1092 (R)
100uF (C2)
100uF (Ci) 10mH (L)
Fig.4.
b) The equation of an alternating current is i(t) = 62.35Sin323t A. Determine its (1)
maximum value (i) frequency in Hz (ii) rmsvalue (iv)average value. [4]
4. a) Why do we prefer sinusoidal wave form for ac source? [21
b) An ac circuit has R = 102 and L=50 mH series connected load. A supply of 200 V
and 50 Hz is connected across it. Find the impedance offered by R-L load, also the current drawn
and power factor of the load and draw the phasor diagram. [S.5]
5) Write any five questions: [SX1.5-7.5]
)Difference between AC and DCsystem
b Difference between star and delta connections in AC circuit
c) Difference between nodai and mesh analysis method
d) Difference between single phase and poly phase circuit
} Explain all the parameters used in the AC waveform
f) Difference between dependent and independent sources
g) Difference between impedance diagram and phasor diagram
2022UGt
TECHNOLOGY JAMSHEDPUR
NATIONAL INSTITUTE OF
Materials Science (MM1101)
Depart1ment of CE/CSE/ECE/EE
Semester)
Mid Semester Examination (1
Full Marks: 30
Time: 2 hrs., Date of Exam: 25h Jan 2023
Dr. Partha Duley & Dr. Ram Krishna
Course Faculty: Dr. Anushree Dutta, Dr. Jichil Majhi,
Instructions:
carries 10 marks.
Attempt any 3 questions out of 4 questions. Each question
missing data, may be assumed
Answers of the questions to be precise and to the point. In case of
appropriately.
1(a). Determine Planar Miller Indices. [2+2]
(b) Sketch a cubic unit cell and mark the following direction. [2]
) [O12]
(ii) [310]
(c) Calculate the planar density in (100) crystallographic plane of Iron with BCC 4
crystalstructure and R = 0.23 nm.,
(a) Findthe linear density of FCCin [110] direction and a = 0.504 nm. [21
2. (a) Convert the three-index Miller indices into Miller-Bravais four-index system for (3]
hexagonal crystals.
i. [101] direction
ii. [111]direction
(b) Calculate the Atomic Packing Factor for a Hexagonal closed-packed (HCP) (3]
crystal system.
two-dimensional defect.
(c) Write an example cach for one dimensional defect and [1]
of
(d) Compute the line energy of dislocations in FCC copper. The shear modulus [3]
copper is 44.7 GNm, Lattice parameter of FCCcopper (a =3.628 A).
OR
What is meant by single crystalline and polycrystalline materials? What are
Frenkel defect and Schottky defect?
3. (a) What is true stress and true strain curve? A cylindrical specimen of steel having [2+2]
an original diameter of 12.8 mm is tensile tested to fracture and found to have an
engineering fracture strength or = 460 MPa. If its cross-sectional diameter at
fracture is 10.7 mm, determine the true stress at fracture.
(b) A cylindrical specimen of an alloy 8 mm in diameter is stressed elastically in [3]
tension. A force of 15,700 N produces a reduction in the specimen diameter of
7X 10 mm. Compute Poisson's ratio for this material, if its modulus of elasticity
is 140GPa,
OR
A specimen of Aluminiumhaving a rectangular cross section 15.2 mm X 19.1 mm
is pulled in tension with 44,500 N force, producing only elastic deformation.
Calculate the resulting strain. Elastic modulus of Al = 107 GPa.
(c) What are slipplane and slip direction? How can it be predicted in any crystal [3]
system?
4. (a) Differentiate between [2+2]
1. Edge and Screw dislocations
ii. Resilience and toughness
(b) Why yield point phenomena occurs in few materials? [2]
(c) Why FCCmetals are more ductile than BCC and HCP metals? [2]
(d) Name any two-indentation hardness test. Draw energy absorbed vs temperature [2]
plot for FCCand low strength BCC materials
OR
What are the different properties of a material can be measurcd using impact test?
Best of luck
National Institute of Technology, Jamshedpur
Department of Civil Engineering
B.Tech(H), 1" sem Mid Semester Examination, 2022-23
Branch: UG CE/CSE/ECE/EE
Paper: Environmental Science (CE 1101)
Course Instructor: Dr. J. Jayapal, Dr. Bhupali Dutta, Dr. Suravi Pal, Dr. Debshri
Swargiary
Date: 24/01/2023 (A1 Shift: 9:30 A.M. to 11:30 A.M.)
Maximum MarkS: 30 Time: 120Minutes
Question number 1 is compulsory
Students are required to attempt any 04 out of the rest of the questions.
(Try to avoid writing long paragraphs; instead use bullet points, flow charts, underlining and
pictorial presentation wherever possible)
Marks
Questions
t . Define the following terms: (5X2 = 10)
a) Food web
B) Energy pyramid
) Desert ecosystem
Biodiversity hotspot
e Genetic diversity
What are the functional aspects of an ecosystem? (5)
flow of water, and (b) (2+2+1)
3. Classify the aquaticecosystem based on (a) rate of food chain
salinity. What are thethreats to aquatic ecosystem? Draw the
of marine ecosystem.
(5)
Describe the various biogeographic regions of India.
biodiversity. (5)
2 Describe the direct and indirect values of
ecosystem found in India? What (2+1+2)
6. What are the different types of grassland
How can we conserve the grassland
are the uses of grassland ecosystem?
ecosystem?
.-End
