TDA1083

One Chip AM/FM Radio with Audio Power Amplifier

Description
The integrated circuit TDA1083 includes, with exception of the
FM front end, a complete AM-FM-radio-circuit with audio Features
power amplifier. An internal Z-diode stabilizes the supply
z Large supply voltage range VS=3 to 12V
voltage at Vs=13V, which allows with the aid of a resistor and
z High AM-Sensitivity
a rectifier, the circuit to be driven by a higher external supply
voltage. z Limiting threshold voltage Vi=50µV
z Audio output power P0=0.7W
Applications z AFC-connection for VHF-tuner
z AM-/FM- and audio-amplifier z AM-FM switching without high frequency voltages

Figure 1. Block diagram and pin connections

Absolute Maximum Ratings

Reference points Pin 3 and 11, unless otherwise specified
Parameters Symbol Value Unit
Supply voltage range Pin 13 Vs 3 to 12
Supply current when using the integrated stabilization
Circuit, Vs = 12.5 to 14.3V Pin 13 Is 50 mA
Power dissipation Tamb=65 Ptot 600 mW
Junction temperature Tj 125
Storage temperature range Tstg -25 to 125

Thermal Resistance
Parameters Symbol Maximum Unit
Junction ambient RthJA 100 K/W

[Link] 1
 TDA1083
One Chip AM/FM Radio with Audio Power Amplifier

Electrical Characteristics
Vs=9V, reference points Pin 3 and 11, Tamb = 25 , unless otherwise specified
Parameters Test Conditions / Pin Symbol Min Typ Max Unit
AF amplifier
AF voltage amplification F=1 kHz Gv 40 dB
Input impedance Ri 150 kΩ
Output power Figures 4 and 5 Po 300 mW
Vs=5.5V
RL=8Ω, K=10%
AM-IF amplifier, fi=1 MHz, fIF=455kHz, fmod=1 kHz, m=0.3
DC voltages at AM mode Vs=3V Pin 10 V10 1.2 V
Without signal Pin 12 V12 1.0 1.4 V
Pin 13 V13 3.0 3.0 3.0 V
Pin 16 V16 1.25 2.0 V

Is=42mA Pin 10 V10 1.2 V

(Vs=12.5 to 14.3V) 7.2 V
Pin 12 V12 5.9
Pin 13 V13 12.5 13.3 14.3 V
Pin 16 V16 1.5 2.0 V
Regulation range VOAF/VOAF =-10dB
Pin 6 Vi 70 dB
AF voltage at demodulator Pin 8 VOAF 100 mV
output
FM-IF amplifier, fIF=10.7 MHz, f=±22.5 kHz, fmod=1 kHz
DC voltages at FM mode Vs=3V Pin 10 V10 1.2 V
without signal Pin 12 V12 1.0 1.4 V
Pin 13 V13 3.0 3.0 3.0 V
Pin 16 V16 1.8 2.8 V

Is=42mA Pin 10 V10 1.2 V

(Vs=12.5 to 14.3V) 7.2 V
Pin 12 V12 5.9
Pin 13 V13 12.5 13.3 14.3 V
Pin 16 V16 2.0 3.1 V
Limiting threshold (-3dB) Pin 2 VI 50 µV
AF voltage at demodulator Pin 8 VOAF 100 mV
output
Different dc voltages are developed at Pin 16 due to gain spread of AM-IF-amplifier. To determine the value of parallel resistance
R8, at the output of the demodulator Pin 8 for Vs =9V, AM mode without signal, dc voltage should be selected at Pin 16.

Table 1. Available in following voltage groups

V16 1.4 to 1.7V 1.7V to 1.9V 1.9 to 2.1V
R8 ∞ 47kΩ 33kΩ
Group 1 2 3

[Link] 2
 TDA1083
One Chip AM/FM Radio with Audio Power Amplifier

Figure 2. Figure 4.

Figure 3. Figure 5.

[Link] 3
 TDA1083
One Chip AM/FM Radio with Audio Power Amplifier

Figure 6.

Figure 7.

[Link] 4
 TDA1083
One Chip AM/FM Radio with Audio Power Amplifier

Figure 8.
Components in Figure 9
L1 = 4 Wdg Ø 0.45CuL, threaded core 7.5 x 3 material: Fi 01 U8 (Vogt GmbH)
L2 = 5 Wdg Ø 0.45 CuL
L3 = 5 Wdg Ø 0.45 CuL, air core Ø 3.5mm
L4 = 3+3 Wdg Ø 0.45 CuL, air core Ø 2.7mm
L5 = 12 Wdg Ø 0.45CuL, Pin 3-1, filter kit 154AN (C) or 154 ANs-7 A6363A0(TOKO,Componex)
L6 = 2 Wdg Ø 0.25 CuL, Pin 4-6
L7 = 7 Wdg Ø 0.25 CuL, Pin 6-3, filter kit 154AN(C) or 154EES-7 A6392FA(TOKO,Componex)
L8 = 7 Wdg Ø 0.16 CuL, Pin 1-4, filter kit 154AN(C) or 154EES-7 A6391ABM(TOKO,Componex)
L9 = 5 Wdg Ø 0.16 CuL, Pin 2-6
L10 = 96 Wdg Ø 0.25 CuLs, ferrite aerial Ø 8x130mm, type 031039-2103-606,(Draloric)
L11 = 6 Wdg Ø 0.25 CuLs
L12 = 78 Wdg Ø 0.09 CuL,Pin 3-4, filter kit RHN(C) or RWOS-6A7609AAU (TOKO, Componex)
L13 = 7 Wdg Ø 0.09CuL, Pin 2-1
L14 = 18 Wdg Ø 0.09 CuL,Pin 3-4, filter kit RHN(C) or RHCS-1A7607AQH (TOKO, Componex)
L15 = 46+100 Wdg Ø 0.09CuL, Pin 6-2-1
L16 = 72+72 Wdg Ø 0.09 CuL Pin 3-4/6-1, filter kit RHN(C) or RHNS-1 A7608AZP (TOKO, Componex)
455kHz = Ceramic filter LBF 6 (Componex ) or CFU 445 H (Stettner)
10.7 MHz = Ceramic filter 10.7 MF-18 (Componex) or SFE 10.7 MA (Stettner)
Dr1, Dr3 = Ferrit bead on the transistor terminal
Dr2 = 16 Wdg 0.25 CuL, Ø 2 air core
Dr4 = 6 Wdg 0.15 CuL, Ø 2.1 x 3 mm ferrit bead
C6=C14 = 4.5 to 20 pF, variable capacitor type CY2-22124-RT02 (TOKO, Componex)
C19 = 5 to 80pF
C21 = 5 to 140pF
R8 = According to gain groups co, 47 kΩ or 33 kΩ

[Link] 5
 TDA1083
One Chip AM/FM Radio with Audio Power Amplifier

Figure 9. FM-/AM-receiver circuit

[Link] 6
 TDA1083
One Chip AM/FM Radio with Audio Power Amplifier

Figure 10.

[Link] 7
 TDA1083
One Chip AM/FM Radio with Audio Power Amplifier

[Link] 8