Faster, easier, stronger
than 1⁄2" lags.
the first fastener engineered
to attach deck ledger boards
to a wooden house structure
with no predrilling.
• Stronger design shear
values than 1⁄2" lags
• IBC/IRC code compliant.
ESR# 1078
• Built-in washer head design
eliminates the need for
additional washer
• Proprietary three-step coating
process protects against
corrosion, even in pressure
treated wood. ACQ approved
• Free 5⁄16" driver bit in
every package
Note: Not designed for use in
masonry or concrete
Photograph should not be used as a reference for
fastening patterns.
For more information or free samples,
call FastenMaster at 800.518.3569.
FASTENMASTER, 153 BOWLES ROAD, AGAWAM, MA 01001 [Link]
INSTALLATION PROCEDURE PRODUCT FEATURES
LedgerLok should be installed using a high torque, ⁄2" variable speed drill (at least 18V if cordless).
1
Choose the proper length LedgerLok so that threads fully engage the main member (i.e., rim joist). Bring
washer flush to side member – do not countersink. ⁄16" hex
5
with oversized
Lateral Design Values (in pounds per Fastener)
washer head
for single shear connections loaded perpendicular to grain
Nails Lags
Specific FastenMaster MADE OF HEAT
Wood Gravity** LedgerLok 16D 20D 3
⁄8" 1
⁄2"
TREATED STEEL FOR
Red Oak 0.67 373 184 222 160 280
DRAMATICALLY
Southern Pine 0.55 290 154 185 140 230 INCREASED
Doug. Fir-L, SCL* 0.50 255 141 170 130 200 STRENGTH AND
Doug. Fir-S 0.46 233 131 157 120 190 DRIVABILITY
Hem. Fir 0.43 216 122 147 120 180
E. Spruce, W. Cedar 0.36 179 104 126 100 150
* SCL=Structural Composite Lumber (LVL,PSL and LSL) MULTI-COATED
** Wood species identified typically have average specific gravity similar to the values shown on this table. FOR GUARANTEED
All design values based on 11⁄2" side member thickness and penetration into main member as follows: CORROSION
LedgerLok 2", Nails 10x diameter, Lags 8x diameter. Design values may be subject to adjustment factors PROTECTION.
(section 10.3 in NDS) based on conditions existing during installation as well as those expected during ACQ approved
service life.
The lag screw and nail design values included in these tables are compiled directly from the 2005
National Design Specification for Wood Construction (2005 NDS).
For correct fastening patterns and complete installation procedures when attaching the deck ledger to SUPER-SIZED
rim joist, consult our Deck Ledger to Rim Joist Technical Bulletin at [Link]. In some ledger THREADS FOR
board connections, LedgerLok may not be a one-to-one replacement for 1⁄2" lag screw patterns. INCREASED HOLDING
For use of LedgerLok in non-ledger applications, please consult a design professional for designing all POWER
connections, which include the number and location of all fasteners to meet the national and local code
requirements.
Ledger Board Attachment Comparative Data
The statement “Faster, Easier, Stronger than 1⁄2" lag screws” refers to the comparison of LedgerLok design
values in ICC-ES Report #1078 and 1⁄2" lag screws as published in the current NDS. GIMLET POINT FOR
For complete design values and engineering data, available through ICC-ES, see report FAST DRILLING
ESR #1078 at [Link].
For technical assistance or questions regarding proper use of this fastener, please contact FastenMaster
Technical Support at 800.518.3569 or visit [Link].
Item # Screw Length Quantity per Pack
FMLL358-12 3 ⁄8"
5
12
FMLL005-12 5" 12
FMLL358-50 3 ⁄8"
5
50
FMLL005-50 5" 50
FMLLSHEET (0211)
FMLL358-250 35⁄8" 250
FMLL005-250 5" 250
FASTENMASTER, INC., 153 BOWLES ROAD, AGAWAM, MA 01001
800.518.3569 [Link]
FastenMaster® and LedgerLok® are trademarks of OMG, Inc. Copyright © 2011 OMG, Inc. All rights reserved.
