********Password Reset Setp****************
1. reboot the router and press CTRL+B at startup
2. Main Menu
1. Default startup
2. Serial submenu
3. Ethernet submenu
4. Startup parameters submenu
5. File system submenu
6. Password manager submenu
7. DFX submenu
0. Reboot
Enter your choice(0-7):6
Password manager submenu
1. Modify bootloader password
2. Clear the console login password
3. Reset bootloader password
0. Return
Enter your choice(0-3):2
Caution: A new console password must be set after the restart.Continue now? Yes(y)
or No(n):y
Password:
Clear password for console user successfully.
Password manager submenu
1. Modify bootloader password
2. Clear the console login password
3. Reset bootloader password
0. Return
Enter your choice(0-3):1
Modify password. The password length must >= 8. Press Ctrl+c to break.
Old password:
Password not modify
Password manager submenu
1. Modify bootloader password
2. Clear the console login password
3. Reset bootloader password
0. Return
Enter your choice(0-3):0
Main Menu
1. Default startup
2. Serial submenu
3. Ethernet submenu
4. Startup parameters submenu
5. File system submenu
6. Password manager submenu
7. DFX submenu
0. Reboot
Enter your choice(0-7):0
*************Huawei CLI Commands*****************
arp Specify ARP configuration information
arp-ping ARP-ping
autosave <Group> autosave command group
backup Backup information
cd Change current directory
clear <Group> clear command group
clock Specify the system clock
cls Clear screen
compare Compare configuration file
copy Copy from one file to another
debugging <Group> debugging command group
delete Delete a file
diagnose Specify diagnose information
dialer Dialer
dir List files on a filesystem
display Display information
factory-configuration Factory configuration
format Format file system
free Release a user terminal interface
ftp Establish an FTP connection
gdoi Config IPSec Gdoi policy
help Description of the interactive help system
hwtacacs-user HWTACACS user
igmp Specify parameters for IGMP
license <Group> license command group
lldp Link Layer Discovery Protocol
local-user Add/Delete/Set user(s)
lock Lock the current user terminal interface
mkdir Create a new directory
more Display the contents of a file
move Move from one file to another
mpls MPLS parameters
mtrace Trace route to multicast source
ops OPS(Open Programmability System)
partition Partition the device
patch Patch operation
ping <Group> ping command group
pki Configure Public Key Infrastructure (PKI) module
information
power Power on or off operate
pwd Display current working directory
quit Exit from current mode and enter prior mode
reboot Reboot system
refresh Do soft reset
remove Remove device safely
rename Rename a file or directory
reset <Group> reset command group
return Enter the privileged mode
rmdir Remove an existing directory
rollback Active/standby mainboard rollback command
save <Group> save command group
schedule Schedule system task
screen-length Set the number of lines displayed on a screen
screen-width Set screen width
send Send information to other user terminal interfaces
set <Group> set command group
sslvpn Sslvpn
startup Config parameter for system to startup
super Modify super password parameters
system-view SystemView from terminal
telnet Open a telnet connection
terminal Set the terminal line characteristics
test-aaa Accounts test
tftp Establish a TFTP connection
trace Trace route (switch) to host on Data Link Layer
tracert <Group> tracert command group
undelete Restore deleted files or directory
undo Negate a command or set its defaults
unzip Unzip files or directory
upgrade Upgrade
zip Zip files or directory
************CREATE NEW USER**********************
[Huawei]aaa
[Huawei-aaa]local-user CBEADMIN password cipher !123$AB*G
[Huawei-aaa]save
[Huawei-aaa]display current-configuration
Huawei> system-view
[Huawei] user-interface console 0
[Huawei-ui-console0] authentication-mode password
[Huawei-ui-console0] set authentication password cipher huawei@123
[Huawei-ui-console0] return
Restore factory settings through the CLI.
Run the reset saved-configuration command to delete the content of the
configuration
files for next startup and cancel the configuration files for next startup so
that the default
router settings are restored.
Run the reboot fast command to restart the system
pki rsa local-key-pair create huawei exportable
