Scribd
Upload
74 views12 pages

User Manual of VOM719WP - 2019-09-16

The VOM719WP is a 7" color TFT LCD monitor designed for heavy-duty commercial use, featuring six camera triggers and waterproof housing (IPX6). It supports multiple display modes and is compatible with Voyager wired cameras, providing options for rear and side monitoring. The monitor includes various controls for brightness, contrast, and audio, and is designed for easy installation with specific camera input connections for vehicle integration.

Uploaded by

Didier Bazin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views12 pages

User Manual of VOM719WP - 2019-09-16

The VOM719WP is a 7" color TFT LCD monitor designed for heavy-duty commercial use, featuring six camera triggers and waterproof housing (IPX6). It supports multiple display modes and is compatible with Voyager wired cameras, providing options for rear and side monitoring. The monitor includes various controls for brightness, contrast, and audio, and is designed for easy installation with specific camera input connections for vehicle integration.

Uploaded by

Didier Bazin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

VOM719WP

7" COLOR TFT LCD MONITOR


OWNER’S MANUAL

Engineered for heavy-duty, commercial use


Six camera triggers
Waterproof housing (IPX6)
Supports AMPS mounting pattern
High-performance Automotive Grade 7" Color LCD Panel
Four Camera Inputs
Single/Split/Quad Display Modes
PAL/NTSC Compatible
DC Auto Source for Switching Triggers (Turn Signal Compatible)
Backlight Control Buttons
Built-in Audio Speaker
Compatible with Voyager Wired Cameras
for rear-view

Moisture
Your Voyager VOM719WP is designed to be IP66 water-resistant. Therefore it can
withstand long period of exposure to moisture. This unit should NEVER be cleaned
with a power washer or used where direct power washer spray may be encounted.
POWER/TRIGGER CABLE CAMERA CABLE
QTY.1 QTY.1

SUNVISOR MACHINE SCREW


QTY.1 QTY.12 (M4X8MM)
1. POWER ON/OFF

2. CAMERA

3. DIMMER

Primary Function: Enter Menu


4. MENU
-Press to enter the menu
Secondary Function: Menu Option Selection
-When in menu mode, press to select the
highlighted function or option setting
Third Function: Auto Scan
-Press button for 3s, the monitor will enter into
the auto scan function

5&6. UP/DOWN
-Pressing ‘UP’ button increase brightness, contrast, color,
tint, volume.
-Pressing ‘DOWN’ button decrease brightness, contrast, color,
tint, volume.
PRESS TO ENTER THE MENU

PRESS TO SELECT
Rear-mounted cameras used for monitoring while backing up should be connected
to the Camera 1 input. If the rear camera image is desired to be displayed automatically
when in reverse gear, channel 1 trigger should be connected to the reverse gear light circuit
in the vehicle.

If side monitoring cameras are installed, they should be connected to either Camera 2 or Camera 3
input. If side camera image is desired to be displayed when changing lanes, triggers 2 and 3 should
be connected to the vehicle's turn signal.
TYPICAL SYSTEM CONNECTION

RED POWER IN 12-24V DC


View Angle
(CR 10)
v

You might also like