Semiconductor DPP-01
1. Identify the gate from the following:
(1) (2)
(3) (4)
(1) NOT gate (2) AND gate
(3) OR gate (4) None of these
6. With reference to figure, which of the following is
2. Which of the following is not correct? possible?
(1) A B = A + B
(2) A B = A B
(3) ( A B ) ( A.B ) = AB + AB
(1) A = 0, B = 0, X = 1
(4) 1+1 =1
(2) A = 0, B = 1, X = 0
(3) A = 1, B = 0, X = 0
3. ( )
In the Boolean algebra, A B A equals to: (4) A = 1, B = 1, X = 0
(1) A+B (2) A
7. Name the gate represented by the following circuit:
(3) A B (4) A+B
4. For the given logic circuit,
(1) OR gate (2) XOR gate
(3) AND gate (4) NAND gate
Which of the these is correct?
(1) y = 0 for X1 = X3 = 0 and X2 = 1 8. The combination of ‘NAND’ gates shown here
(2) y = 0 for X1 = X2 = X3 = 0 under (figure) are equivalent to:
(3) y = 0 for X1 = X2 = X3 = 1
(4) y = 1 for X1 = X2 = 1 and X3 = 0
5. In a given circuit as shown the two input waveforms
A and B are applied simultaneously. The resultant
waveform Y is:
(1) An OR gate and AND gate respectively
(2) An AND gate and a NOT gate respectively
(3) An AND gate and an OR gate respectively
(4) AN OR gate and a NOT gate respectively
9. The following truth table corresponds to the logic 13. To obtain an output 1 from the circuit shown in the
gate where A and B represent inputs and X represents figure, the input must be:
output.
A B X
0 0 0
0 1 1
1 0 1 (1) A = 0, B = 1, C = 0
1 1 1 (2) A = 1, B = 0, C = 0
(1) NAND (2) AND (3) A = 1, B = 0, C = 1
(3) XOR (4) OR (4) A = 1, B = 1, C = 0
10. In order to obtain an output y = 1 from the circuit of 14. The figure below gives a system of logic gates.
figure, the inputs must be: From the study of truth table, it can be found that to
produce a high output (1) at R, we must have:
A B C
(1) 0 1 0
(2) 1 0 0
(1) X = 0, Y = 1 (2) X = 1, Y = 1
(3) 1 0 1
(3) X = 1, Y = 0 (4) X = 0, Y = 0
(4) 1 1 0
15. The diagram shows a logic network.
11. For the given combination of gates, if the logic states
of inputs A, B, C are as follows A = B = C = 0 and A =
B = 1, C = 0, then the logic states of output D are:
Which single gate is equivalent to the network?
(1) 0, 0 (2) 0, 1
(1) EX-NOR (2) NOR
(3) 1, 0 (4) 1, 1
(3) EX-OR (4) OR
12. The figure shows two NAND gates followed by a
16. Logic gates X and Y have the truth tables shown
NOR gate. The system is equivalent to the following
logic gate:
below:
P Q R A B
0 0 0 0 1
1 0 0 1 0
0 1 0
1 1 1
When the output of X is connected to the input of Y,
(1) OR (2) AND
the resulting combination is equivalent to a single:
(3) NAND (4) None of these
(1) NOT gate (2) OR gate
(3) NAND gate (4) AND gate
17. Which of the following gates will have an output of 22. The Boolean equation of NOR gate is
1: (1) C = A + B
(1) (2) (2) C = A+ B
(3) C=A·B
(3) (4) (4) C = A B
23. Which gates is represented by this figure
18. This symbol represents:
(1) NOT gate (2) OR gate (1) NAND gate
(3) AND gate (4) NOR gate (2) AND gate
(3) NOT gate
19. Which logic gate is represented by the following (4) OR gate
combination of logic gates:
24. In the given circuit, value of Y is:
(1) OR (2) NAND
(3) AND (4) NOR
20. Given below are four logic gate symbol (figure). (1) 0
Those for OR, NOR and NAND are respectively (2) Toggles between 0 and 1
(3) Will not execute
(4) 1
(1) (2)
25. The logic gate equivalent to the given logic circuit
is:
(3) (4)
(1) 1, 4, 3 (2) 4, 1, 2
(3) 1, 3, 4 (4) 4, 2, 1
21. A truth table is given below. Which of the following
has this type of truth table?
A 0 1 0 1
B 0 0 1 1 (1) NAND
y 1 0 0 0 (2) OR
(1) XOR gate (3) NOR
(2) NOR gate (4) AND
(3) AND gate
(4) OR gate
26. The truth table for the circuit given in the figure is:
A B Y A B Y
0 0 1 0 0 1
(1) 0 1 1 (2) 0 1 0
1 0 1 1 0 0
1 1 1 1 1 0
A B Y A B Y
0 0 1 0 0 0
(3) 0 1 1 (4) 0 1 0
1 0 0 1 0 1
1 1 0 1 1 1
Answer Key
1. (4) 14. (3)
2. (2, 4) 15. (3)
3. (2) 16. (3)
4. (1) 17. (3)
5. (1) 18. (1)
6. (4) 19. (3)
7. (2) 20. (3)
8. (1) 21. (2)
9. (4) 22. (2)
10. (3) 23. (1)
11. (4) 24. (1)
12. (2) 25. (2)
13. (3) 26. (3)
