0% found this document useful (0 votes)
94 views3 pages

QuickServe Online - (3666113) QSK23 Sensor Value

The document provides essential electrical and sensor specifications for trained technicians, emphasizing the importance of proper troubleshooting to avoid severe injury or damage. It includes detailed data on various sensors such as oil pressure, coolant pressure, temperature, and fuel pressure, along with their corresponding voltage and resistance values. Additionally, it warns that all continuity checks should show less than 10 Ohms for an open circuit and more than specified values for short circuits.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
94 views3 pages

QuickServe Online - (3666113) QSK23 Sensor Value

The document provides essential electrical and sensor specifications for trained technicians, emphasizing the importance of proper troubleshooting to avoid severe injury or damage. It includes detailed data on various sensors such as oil pressure, coolant pressure, temperature, and fuel pressure, along with their corresponding voltage and resistance values. Additionally, it warns that all continuity checks should show less than 10 Ohms for an open circuit and more than specified values for short circuits.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

(/qs3/pubsys2/xml/en/manual/3666113/3666113-titlepage.

html)

Trainings

General Information
 WARNING 

This diagram is provided as a diagnostic tool for trained, experienced technicians only.
Improper troubleshooting or repair can result in severe personal injury or death or property
damage. See important instructions in Service Manual.

Electrical Specifications
DATA LINK
Positive wire to chassis ground
2.5 to 5.0 VDC
Negative wire to chassis ground
0.0 to 2.5 VDC
ALL CONTINUITY CHECKS
OK (no open circuit) if less than 10 Ohms
ALL SHORTS TO GROUND
ESS circuits
OK (no short circuit) if more than 10 MOhms
All other circuits
OK (no short circuit) if more than 100k Ohms

Sensor Specifications
Oil Pressure Sensor
Pressure (kPa) Pressure [psi] Pressure [inHg] Voltage (VDC)
0 0 0 0.22 to 0.80
103 15 30.54 1.00 to 1.20
172 25 50.90 1.33 to 1.68
345 50 101.80 2.17 to 2.83
517 75 152.70 3.09 to 3.91
689 100 203.60 4.10 to 4.92

Coolant or Intake Manifold Pressure Sensors


Pressure (kPa) Pressure [psia] Pressure [inHg] Voltage (VDC)
0 0 0 0.22 to 0.80
103 15 30.54 1.23 to 1.40
207 30 61.08 1.97 to 2.27
310 45 91.62 2.71 to 3.16
414 60 122.16 3.45 to 4.04

All Temperature Sensors


Temperature (C) Temperature [F] Resistance (Ohms)
0 32 30K to 36K
25 77 9K to 11K
50 122 3K to 4K
75 167 1350 to 1500
100 212 600 to 675

Barometric (Ambient) Air Pressure Sensor


Pressure (kPa) Pressure [psia] Pressure [inHg] Voltage (VDC)
0 0 0 0.32 to 0.69
34.47 5 10.18 1.58 to 2.09
68.95 10 20.36 2.89 to 3.45
103.42 15 30.54 4.12 to 4.85

Fuel Pump or Timing Rail Pressure Sensor


Pressure (kPa) Pressure [psia] Pressure [inHg] Voltage (VDC)
0 0 0 0.48 to 0.53
103.42 15 30.54 0.63 to 0.67
345 50 101.80 0.98 to 1.13
1034 150 305.40 1.98 to 2.33
1724 250 509 2.97 to 3.55
2585 375 763.50 4.18 to 4.92
Fuel Rail Pressure Sensor
Pressure (kPa) Pressure [psia] Pressure [inHg] Voltage (VDC)
103 15 30.54 0.48 to 0.52
345 50 101.80 1.03 to 1.17
689 100 203.60 1.81 to 2.09
1034 150 305.40 2.59 to 3.00
1379 200 407.20 3.38 to 3.93
1724 250 509 4.17 to 4.84

Engine Speed Sensor


Torque = 34 to 47 N•m [25 to 35 ft-lb]
First Coil Resistance = 750 to 1100 Ohms
Second Coil Resistance = 1100 to 1500 Ohms

Last Modified: 29-Apr-2010

You might also like